Items where Subject is "T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering."

.

., Lily Amelia and Abdul Wahab, Dzuraidah and Hassan, Azmi (2009) Modelling of palm oil production using fuzzy expert system. Expert Systems with Application, 36 (5). pp. 8735-8749. ISSN 0957-4174

., Lily Amelia and Wahab, Dzuraidah and Hassan, Azmi (2008) Pembangunan model pengoptimman pengeluaran minyak sawit dan isirong sawit menggunakan pendekatan genetik kabur. Jurnal Teknologi, 48. pp. 71-89. ISSN 2180–3722 (O), 0127–9696 (P)

A

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Gunasegaran, Umma Sankar and Lim, Joo Eng and Mohamad Amiruddin, M. S. and Tomadi, Siti Haryani (2023) Influence of cutting edge radius (CER) and width of cut (WOC) on tool wear in milling SUS 316 stainless steel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9—10 August, 2022, Kuala Lumpur.

Abdul Latiff, Abdul Somad and Musa, Mukhtaruddin and Anhar, Zaki and Illias, Suhaimi and Ani, Mohd Hanafi (2020) Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Abdul Rahim, Nadirah and Nordin, Nor'Afifah (2020) Reliability model and proposed maintainability activities of earth station system. International Journal of Electrical, Electronics and Data Communication, 8 (5). pp. 20-24. ISSN :2321-2950 E-ISSN 2320-2084

Abdul Rahman, Nur Shazana and Abdul Rahim, Nadirah (2022) Analysis of reliability prediction and maintainability activities of an earth station system using parallel configurations. In: 2022 9th International Conference on Industrial Engineering and Applications (ICIEA 2022), Online Conference.

Abdulghafor, Rawad Abdulkhaleq Abdulmolla and Abdullah, Shahrum Shah and Turaev, Sherzod and Othman, Mohamed (2018) An overview of the consensus problem in the control of multi-agent systems. Automatika: Journal for Control, Measurement, Electronics, Computing and Communications, 59 (2). pp. 143-157.

Abu Samah, Mohd Armi and Yunus, Kamaruzzaman and Wan Kamal, Wan Mohd. Hilmi and Mohd. Hussain, Mohd. Ramzi and Hassan Basri, Raszera (2021) Food wastes management: practice of composting process at the IIUM Kuantan Campus. In: Natural Food Product and Waste Recovery. Taylor & Francis Group.

Ahlan, Abdul Rahman and Arshad, Yusri and Mahmud, Murni (2010) Integrating thin client solution in human-computer interaction study. WSEAS Transactions on Information Science and Applications, 7 (6). pp. 809-818. ISSN 1790-0832

Ahlan, Abdul Rahman and Arshad, Yusri and Suhaimi, Mohd Adam and Hussin, Husnayati (2009) IT outsourcing industry practices, models, trends and challenges from a case of a Malaysian offshore global service provider. International Journal of Mathematics and Computers in Simulation, 3 (2). pp. 89-96. ISSN 1998-0159

Ahlan, Abdul Rahman and Arshad, Yusri and Suhaimi, Mohd Adam and Hussin, Husnayati (2008) The future skill-sets expectations of IT graduates in Malaysia IT outsourcing industry. In: 7th WSEAS International Conference on E-ACTIVITIES (E-ACTIVITIES '08), 29-31 December, 2008, Cairo, Egypt.

Ahlan, Abdul Rahman and Mahmud, Murni and Arshad, Yusri (2010) Conceptual architecture design and configuration of thin client system for schools in Malaysia: a pilot project. In: The 4th International Symposium on Information Technology, 15-17 June 2010, Kuala Lumpur.

Ahlan, Abdul Rahman and Suhaimi, Mohd Adam and Hussin, Husnayati and Arshad, Yusri (2008) Assessing future needs of IT education in Malaysia: a preliminary result. In: 4th WSEAS/IASME International Conference on EDUCATIONAL TECHNOLOGIES (EDUTE'08), 26th-28th Oct 2008, Corfu, Greece.

Ahlan, Abdul Rahman and Suhaimi, Mohd Adam and Hussin, Husnayati and Arshad, Yusri (2008) Assessment of the impact of IT outsourcing on IT education in Malaysian institutions of higher learnings. INTERNATIONAL JOURNAL OF EDUCATION AND INFORMATION TECHNOLOGIES, 2 (3). pp. 167-174. ISSN 1109-9577

Ahlan, Abdul Rahman and Suhaimi, Mohd Adam and Hussin, Husnayati and Arshad, Yusri (2009) Malaysia IT outsourcing industry: practices, models, trends and challenges from a case of an offshore global service provider. In: Recent advances in applied mathematics and computational and information scinces. A Series of Reference Books and Textbooks, 2 . WSEAS Press, Greece, pp. 396-401. ISBN 978 960 474 071 0 ; 1790-5117

Ahmad, Arfah Juneena and Ayob, Mohd Fairullazi (2023) Flood mitigation management practice: a comparison between stormwater management road tunnel (SMART) and sponge city methods. Journal of Project Management Practice, 3 (2). pp. 1-17. E-ISSN 2805-4768

Ahmad Jasmi, Siti Zulaiha and Ayob, Mohd Fairullazi and Aripin, Srazali and Mohd Rahim, Faizul Azli (2019) Investigation on energy efficiency of lighting system in a university library. Journal of Architecture, Planning and Construction Management, 9 (1). pp. 39-55. ISSN 2231-9514 E-ISSN 2637-0026

Ahmed, Shamsuddin and Mohiuddin, A. K. M. (2005) The successful implementation of TPM in conjunction with EOM and 5S: a case presentation. Journal of Applied Sciences, 5 (5). pp. 938-951. ISSN 1812-5662 (O), 1812-5654 (P)

Aidil Mustafa, Muhammad Asyraaf and Ayob, Mohd Fairullazi (2022) Affordable housing towards sustainable goals: the perspective of young working households in the Klang Valley. In: QS Symposium 2022: Invention & Innovation Research Poster Competition, 22nd October 2022, Royal Institution of Surveyors Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Zahari, Syahir and Bourini, Islam and Ismail, Md Yusof and Ali, Mohammad Yeakub and Adesta, Erry Y. T. (2023) Lean manufacturing and six sigma principles implementation in the industry: case study. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Online Conference.

Al-Turki, Abdullah Nasser and Faris, Waleed Fekry (2010) A critical evaluation on the effectiveness of ISO 9001:2000 (QMS) implementation in Malaysian and Saudi manufacturing companies. International Journal of Arab Culture, Management and Sustainable Development, 1 (3). pp. 302-324. ISSN 1753-9420 (O), 1753-9412 (P)

Alfadli, Mohammed Abdullah and Noordin, Mohamad Fauzan and Billah, Md. Masum (2021) Development of Algorithm for QoS Model in Cloud Computing. Journal of Engineering and Applied Sciences, 16 (8). pp. 264-272. ISSN 1816-949x E-ISSN 1818-7803

Ang, Salem and Olanrewaju, AbdulLateef and Ayob, Mohd Fairullazi (2016) Awareness of developers toward sustainable affordable Housing in Malaysia. In: 15th Management in Construction Researchers' Association (MiCRA) Conference and Annual General Meeting 2016, Kuala Lumpur. (Unpublished)

Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Arshad, Yusri and Ahlan, Abdul Rahman and Hussein, Ramlah (2008) The supply-side IT outsourcing competencies and relationship exchange in Malaysia. In: The 7th WSEAS International Conference on E-Activities (E-Activities `08), 29 - 31 December, 2008, Cairo, Egypt.

Ayob, Mohd Fairullazi (2019) How modified Delphi can help collect data from group of experts? In: Post Graduate Workshop of Research Methodology for the Built Environment for Masters and PhD students s (AED 6020, AED 6070 and AED 7070) in Semester 1, Session 2018/19, 10th April 2019, Kuala Lumpur. (Unpublished)

Ayob, Mohd Fairullazi (2022) Life Cycle Cost analysis for asset and facilities – optimizing investment on asset life cycle through crises. In: Webinar Half Day Seminar on Life Cycle Cost (LCC) for Asset and Facilities, 25th November 2022, Virtual Seminar via “GotoWebinar”. (Unpublished)

Ayob, Mohd Fairullazi (2021) Life Cycle Cost for road pavement maintenance and rehabilitation. In: Virtual Symposium 2021 on Geotechnics and Transportation Research, 26th August 2021, Microsoft Teams. (Unpublished)

Ayob, Mohd Fairullazi (2019) Life cycle cost (beginning) to procurement managers. In: Program Latihan Jabatan Kerja Raya Malaysia 2019 : Pensijilan Ukur Bahan -Pengurus Perolehan (Tahap 3), 5th- 8th August 2019, Alor Gajah, Melaka.. (Unpublished)

Ayob, Mohd Fairullazi (2019) Life cycle cost for construction projects. Input lecture for AAR 7453 Professional Practice 1, (Master of Architecture Programme). In: Input Lecture for AAR 7453 Professional Practice 1, (Master of Architecture Programme), Department of Architecture, Kulliyyah of Architecture and Environmental Design, International Islamic University Malaysia, 15th October 2019, Department of Architecture, Kulliyyah of Architecture and Environmental Design, International Islamic University Malaysia. (Unpublished)

Ayob, Mohd Fairullazi (2023) Overview of life cycle cost formulas and calculation. In: Webinar Half Day Seminar on “Life Cycle Cost Analysis (LCCA) for Asset Management”, 5th December 2023, Virtual Seminar. (Unpublished)

Ayob, Mohd Fairullazi and Abdul Rashid, Khairuddin and Aripin, Srazali and Abdullah, Shamsul Nahar (2015) The comparison of building maintenance services rates between IIUM with other universities and related education buildings. UNSPECIFIED. s.n. (Unpublished)

B

Banu, Asfana and Ali, Mohammad Yeakub (2016) Electrical discharge machining (EDM): A review. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 3-10. E-ISSN 0128-1852

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Bidi, Nor Khalisah and Ayob, Mohd Fairullazi and Aripin, Srazali and Mat Noor, Noorsidi Aizuddin (2020) A study on quality of cost data in Life Cycle Cost analysis of maintenance during the in-use phases of university building. Malaysian Construction Research Journal (MCRJ), 31 (2). ISSN 1985-3807

Bourini, Islam Faisal and Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem (2018) Investigation of effect of machine layout on productivity and utilization level: what if simulation approach. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 32-40.

E

El-hadie, M and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for room temperature end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 331-337. ISBN 9780980825107

El-hadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for preheated end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 576-582. ISBN 978-0-9808251-0-7

Eusuf, Muhammad Abu and Mohd. Din, Shamzani Affendy and Mohamed Ali, Haitham and Khaleed Mansour, Abeer (2015) Engineering management in developing countries a future prospective. International Journal of Technical Research and Applications, 17. pp. 32-34. ISSN 2320-8163

G

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ishtiyaq, M. H. (2007) Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2009) Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.

Ginta, Turnad Lenggo and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2009) Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta , Turnad L. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2008) Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts. In: International Joint Conference in Engineering (IJSE 2008), 4-5 August, 2008, Jakarta, Indonesia.

H

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI HI3 tool steel. In: 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2 - 4 December 2007, Singapore.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model for PCBN inserts during the high speed end milling of AISI H13 hardened tool steel. In: International Conference on Mechanical Engineering (ICME07), 29-31 Dec. 2007, Dhaka, Bangladesh.

Haque, Mahbubul and Karim, A.N. Mustafizul and Muqtadir, Afia and Anam, Shahriyar (2012) Dimensions of job satisfaction of library professionals: a qualitative exploration. International Journal of Business snd Social Research (IJBSR), 2 (5). pp. 42-62. ISSN 2164-2559

Hasan, S. Mainul and Karim, A.N. Mustafizul (2003) Optimization of product mix in a typical yarn manufacturing industry. In: Proc. of the 5th Int. Con. on Mechanical Engineering, Paper ID AM -07, 26-28 Dec., 2003 at BUET, Dhaka, Bangladesh. Department of Mechanical Engineering, BUET, Dhaka, pp. 1-5.

Hasan, S. Mainul and Karim, A.N. Mustafizul (2002) Possible cost reduction by applying MRP in a transformer manufacturing company of Bangladesh. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Hassan, Azmi and Saleh, Chairul and Md Deros, Baba and Muniyandi, Saravanan (2001) Penggunaan kaedah ukur rujuk dalam pemprosesan seramik bagi meningkatkan kualiti dan produktiviti. Jurnal Teknologi, 35 (A). pp. 57-70. ISSN 2180–3722 (O), 0127–9696 (P)

Hazumi, Hazman and Ayob, Mohd Fairullazi and Md. Sharif, Harlina (2018) Creating a new normal for AFM services: 3D laser scanning to BIM for LCC application on built asset. In: The 3rd National Asset and Facility Management Convention (NAFAM 2018), 8th-9th Oct. 2018, Kuala Lumpur. (Unpublished)

Hoda, Asif (2011) Numerical simulation of a simple couette flow in MATLAB using explicit and implicit finite difference schemes. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 7-22. ISBN 9789674180201

Hoque, Mohammed Tariqul and Karim, A.N. Mustafizul and Haque, A. F. M. Anwarul (2003) Scenario of power distribution network in the City of Dhaka in the context of reliability. In: 3rd International Conference of Mechanical Engineers & 8th Annual Paper Meet on E-Manufacturing, 20-22 March 2003, Institution of Engineers, Bangladesh.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Hrairi, Meftah and Chtourou, Hedi (2011) Finite element modeling of the powder compaction process. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 203-252. ISBN 978-967-418-020-1

Hussein, Ramlah and Mohamad, Norshidah and Ahlan, Abdul Rahman and Mahmud, Murni and Aditiawarman, Umar (2010) G2C adoption of e-government in Malaysia: trust, perceived risk and political self-efficacy. International Journal of Electronic Government Research, 6 (3). pp. 57-72. ISSN 1548-3886 E-ISSN 1548-3894

I

Ibrahim, Jamaludin and Ahmad Dahlan, Abdul Rahman (2017) Designing business models options for “University of the Future”. In: 4th International Colloquium on Information Science and Technology (CiSt'16), 24th-26th October 2016, Tangier, Morocco.

Idres, Moumen (2011) Unstructured finite volume for two-dimensional navier stokes equations. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 43-98. ISBN 978-967-418-020-1

Iqbal, Mohammad and Hassan, Azmi and Putera, Adi (2005) The study on the effects of lifting parameters on metabolic energy consumption of manual lifting works. Journal of Occupational Safety and Health, 2 (2). pp. 58-66. ISSN 1675-5456

Iqbal, Mohammad and Purnomo, Muhammad Ridwan Andi and Mohd Imra, Muhammad Ammar and Konneh, Mohamed and Karim, A.N. Mustafizul (2012) The study on production performances of part transporter in flexible manufacturing system by using simulation method. Advanced Materials Research, 576. pp. 714-717. ISSN 1022-6680

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..

Islam, Md. Ariful and Haque, A. F. M. Anwrul and Karim, A.N. Mustafizul (2002) Enhancement of quality small and cottage industries in Bangladesh: Review, analysis and strategies. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Islam, Md. Monowarul and Haque, A. F. M. Anwarul and Karim, A.N. Mustafizul (2002) Maximization of production in knit dyeing industries. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

J

Jamaludin, Nazurin Qamarina and Ahmad Kamran, Alya Aqilah and Zainal Abidin, Aisyah Najibah and Shamsuddin, Sakinah and Ahmad Dahlan, Abdul Rahman (2024) A conceptual Educoach multi-sided business model: online tutoring platform to improve career opportunities of B40s and unemployed graduates as digital entrepreneurs. Journal of Science and Technology, 29 (1). pp. 18-30. E-ISSN 2410-5163

Jameel, Ahmed Tariq (2011) Comparison of a Pseudo-Spectral Method and an implicit finite difference scheme for the solution of a nonlinear dynamic problem. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 23-42. ISBN 978-967-418-020-1

Jameel, Ahmed Tariq (2011) Numerical techniques- an introduction. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 978-967-418-020-1

K

Kafafy, Raed (2011) Immersed finite element method (IFEM). In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 295-346. ISBN 978-967-418-020-1

Kamaruddin, Shafie and Azmi, Nabilah and Sukindar, Nor Aiman (2022) Assembly sequence optimization using the bees algorithm. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering, 900 . Springer, Singapore, pp. 423-433. ISBN 978-981-19-2094-3

Karim, A.N. Mustafizul and Hamdan, Hamdan and Alam, Md Zahangir and Iqbal, M. (2012) Economic scenario of cellulase enzyme production using Palm Oil Mill Effluent (POME). Advanced Materials Research, 576. pp. 723-726. ISSN 1662-8985

Karim, A.N. Mustafizul and Jaafar, Abdul Azim and Abdullah, Muhammad Abdullah and Haque, Mahbubul and Ali, Mohammad Yeakub and Amri, Siti Amy Azline (2012) Applying value stream mapping for productivity improvement of a metal stamping industry. Advanced Materials Research, 576. pp. 727-730. ISSN 1022-6680

Karim, A.N. Mustafizul and Khalid, Nor A. B. and Ismail, Raja N. H. R. and Haque, Mahbubul and Begum, Shahida (2012) Securing superior properties of composite (PP+WF) through central composite design. Advanced Materials Research, 535. pp. 186-189. ISSN 1662-8985

Karim, A.N. Mustafizul and Rahman, Md Mizanur (1993) Cost-effective analysis on the suitability of photovoltaic pumping systems in Bangladesh. Solar Energy Materials and Solar Cells, 30 (2). pp. 177-188. ISSN 0927-0248

Karim, A.N. Mustafizul and Saad, Mohd Fadli (2009) Development of a pilot-scale web-based inventory management system foe lab equipment and consumables. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Khalid, A. K. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model of TIALN coated tools during the high speed hard milling of AISI H13 steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, 24 - 27 October 2007, Zadar, Croatia.

Khalili, Amjad and Ismail, Md Yusof and Che Daud, Mohd Radzi (2018) Lean implementation: organizations approach to excellence. Noor Publishing, Mauritius. ISBN 9786202352321

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Integration of lean manufacturing and quality management system through structural equation modeling. International Journal of Productivity and Quality Management, 20 (4). pp. 534-556. ISSN 1744-6482 E-ISSN 1746-6474

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2015) Understanding contemporary models for organizational sustainability: critical review. International Journal of Services and Operations Management. ISSN 1744-2389 (Unpublished)

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2016) A comparative evaluation of the prevailing models for measuring sustainable performance. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 292-296. ISSN 1819-6608

L

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2008) Hot machining in end milling of hardened steel AISI D2. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008).

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Turnad L., Ginta (2008) Theoretical and experimental investigation in prediction of tool life in preheated machining of AISI 02 hardened steel. IIT Madras, Chennai, India.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2008) Modelling and optimization of tool life in end milling of AISI 02 hardened steel. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ’08), July 23-25, 2008, Naples, Italy.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A.M. Khalid (2007) Prediction of surface roughness in hard milling of AISI D2 tool steel. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Khalid, A. K. H. (2007) Modelling of tool life by response surface methodology in hard milling of Aisi D2 tool steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, , 24 - 27 Oct., 2007, Zadar, Croatia.

M

Mahmud, Khairus Syakirah and Nasry, Nasrul Ashraf and Hilmy, Irfan and Ismail, Md Yusof (2015) Development of a quality check station in a pharmaceutical industry to achieve zero defect production using PDCA cycle. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17421-17426. ISSN 1819-6608

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2020) The effect of cutting parameters on tool wear in drilling aluminium 7075. TEST Engineering & Management, 83 (May-June). pp. 1274-1280. ISSN 0193-4120

Mohammad, Yeakub Ali and Farhana, Sulaiman and Banu, Asfana and Mohamed, Abd. Rahman and Al Hazza, Muataz Hazza Faizi (2017) Investigation of accuracy in microdrilling with minimum quantity lubrication. In: 7th International Conference on Manufacturing Science and Technology (ICMST 2016), 16th-18th July 2016, Sarawak.

Mohd Kahar, Noor Haninah and Ayob, Mohd Fairullazi (2021) Identifying organizational factors as the driving forces of successful Building Information Modelling (BIM) adoption In Malaysian construction organizations. In: 5th International Undergraduate Seminar on Built Environment and Technology 2021 (USBET 2021), 15 December 2021, Bandar Seri Iskandar, Perak. (Unpublished)

Mohd Sopery, Luqman Hakim and Ayob, Mohd Fairullazi (2023) An investigation on sustainable refurbishment practice of building works in Malaysia. Journal of Architecture, Planning and Construction Management, 13 (1). pp. 29-39. ISSN 2231-9514 E-ISSN 2462-2222

Mohd Zammari, Alya Farhani and Ayob, Mohd Fairullazi (2022) Artificial Neural Network (ANN) application for cost estimation of construction projects in Malaysia: a study on quality of data. In: QS Symposium 2022: Invention & Innovation Research Poster Competition, 22nd October 2022, Royal Institution of Surveyors Malaysia. (Unpublished)

Mohiuddin, A. K. M. and Julia , Abdul Jabar (2015) Performance improvement of local automotive industry by adopting JMM. In: International Conference on Mechanical Engineering 2015 (ICME 2015), 18 - 20 December, 2015, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Wee Hock, Quik (2005) Collaborative technologies in new factory's certification process. Journal of Applied Sciences, 5 (2). pp. 267-272. ISSN 1812-5662 (O), 1812-5654 (P)

Mutholib, Abdul and Abdul Rahim, Nadirah and Gunawan, Teddy Surya and Ahmarofi, Ahmad Afif (2024) Performance comparison of data preprocessing methods for trade-space exploration with AI model: case study of satellite anomalies detection. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications ( ICSIMA), 30-31 July 2024, Bandung, Indonesia.

N

Nasry, Nasrul Ashraf and Mahmud, K. S. and Hilmy, Irfan and Ismail, Md Yusof and Basri, R. H. (2015) Energy consideration in pharmaceutical factory layout. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17427-17432. ISSN 1819-6608

O

Omar, Ashraf Ali (2011) Lower-Upper Symmetric-Gauss-Seidal (LU-SGS) algorithm for pseudo compressibility method. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 347-388. ISBN 978-967-180-020-1

Othman, Muhammad Fauzi and Amir, Nursihah and Mansu, Muhifuudin and Zeki, Akram M. (2016) Developing mobile E-groceries model. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

P

Pebrianti, Dwi and Kurniawan, Haris and Bayuaji, Luhur and Rusdah, Rusdah (2024) XgBoost hyper-parameter tuning using Particle Swarm Optimization for stock price forecasting. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 9 (4). pp. 1179-1195. ISSN 2338-3070 E-ISSN 2338-3062

R

Rashid, Shahidah Nusailah and Hayyan, Adeeb and Hayyan, Maan and Hashim, Mohd Ali and Elgharbawy, Amal Ahmad and Sani, Fazrizatul Shakilla and Basirun, Wan Jefrey and Lee, Vannajan Sanghiran and Alias, Yatimah and Mohammed, Alaa Kareem and Mirghani, Mohamed Elwathig Saeed and Zulkifli, M.Y. and Rageh, Maher (2021) Ternary glycerol-based deep eutectic solvents: physicochemical properties and enzymatic activity. Chemical Engineering Research and Design, 169 (5). pp. 77-85. ISSN 0263-8762

S

S., Ahmad Fakhri and Jahare, Muhammad Hafiz and Abd. Rahman, Mohamed (2012) The implementation of lean manufacturing in Malaysian automotive industry. Advanced Materials Research, 576 (2012). pp. 731-734. ISSN 1022-6680

Sabaghpour Azarian, Mahdieh and , Azarian and Nasiruzzaman, Md. and Huq, Md. Najibul and Ibrahim, Jamaludin (2013) Knowledge management strategies as a competitive advantage for delivering professional e-government services. Journal of Education and Vocational Research, 4 (5). pp. 134-138. ISSN 2221-2590

Salleh, Norsaremah and Nordin, Azlin (2015) Trends and perceptions of evidence-based software engineering research in Malaysia. In: 5th International Conference on Information and Communication Technology for The Muslims World (ICT4M 2014), 17th-19th November 2014, Kuching, Sarawak.

Sarker, M. Ruhul Amin and Karim, A.N. Mustafizul and Azad, G. M. Salam (1993) Two cases of integrated inventory system. Journal of the Institution of Engineers, Bangladesh, 21 (4). pp. 45-52. ISSN 0379-4318

Sarker, M. Ruhul Amin and Karim, A.N. Mustafizul and Haque, A. F. M. Anwarul (1995) An optimum batch size for a production system operating under a continuous supply/demand. International Journal of Industrial Engineering, 2 (3). pp. 189-198. ISSN 1072-4761

Semadi, Hadi Farhan and Ayob, Mohd Fairullazi (2024) Improving road safety at accident-prone areas: a comparison between glow-in-the-dark and conventional road marking. PLANNING MALAYSIA: Journal of the Malaysian Institute of Planners, 22 (5). pp. 510-526. ISSN 1675-6215 E-ISSN 0128-0945

Sorooshian, Sharyar and Li, Wenping and Ismail, Md Yusof (2015) Landslide susceptibility mapping: a technical note. Electronic Journal of Geotechnical Engineering (EJGE), 20 (22). pp. 12547-12550. ISSN 1089-3032

Subiyakto, A'ang and Ahlan, Abdul Rahman and Kartiwi, Mira and Jaya Putra, Sopiyanshah (2016) Measurement of the information system project success of the higher education institutions in Indonesia: A pilot study. International Journal of Business Information Systems, 23 (2). pp. 229-247. ISSN 1746-0972 E-ISSN 1746-0980

Subiyakto, A'ang and Ahlan, Abdul Rahman and Kartiwi, Mira and Sukmana, Husni Teja (2015) Measurement of information system project success based on perceptions of the internal stakeholders. International Journal of Electrical and Computer Engineering (IJECE), 5 (2). pp. 271-279. ISSN 2088-8708

W

Wahid, Zaharah (2012) An alternative approach to experimentation and data analysis. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE 2012), 3 - 5 July 2012, Kuala Lumpur.

Wahid, Zaharah and Nadir, Najiah (2012) Improvement of one factor at a time through design of experiments. World Applied Sciences Journal , 21. pp. 56-61. ISSN 1818-4952

Wahid, Zaharah and Che Daud, Mohd Radzi and Ahmad, Kartini (2020) Study on productivity improvement of manual operations in soya sauce factory. IIUM Engineering Journal, 21 (1). pp. 202-211. ISSN 1511-788X E-ISSN 2289-7860

Wahid, Zaharah and Nadir, Najiah (2014) Using design of experiment to evaluate changes to the characteristics of 6-nitroBIPS. In: International Conference on Mathematical Applications in Engineering (ICMAE’14), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Wahid, Zaharah and Shohaimi, Anis Syuhaiz and Che Man, Muhammad Shaharul (2016) Implementation of Halal quality management system in small and medium scale enterprise- impact of mentoring and coaching. In: International Conference on Knowledge Transfer (ICKT'15), 1st-3rd Dec. 2015, Putrajaya.

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2012) Fabrication of surgical cranioplasty biomodel using fused deposition modeling. In: 2012 International Conference on Innovation Management and Technology Research (ICIMTR), 21 - 22 May 2012, Malacca, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2011) Improvement of powder management and recycling in laser sintering. In: International Conference on Manufacturing and Industrial Engineering, (ICMIE), 24-26 June 2011, Paris, France.

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2014) Investigation of the thermal properties of different grades Polyamide 12 (PA12) in improving laser sintering process (SLS). Advanced Materials Research, 548/49. pp. 294-296. ISSN 1022-6680

Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Syazmi, Khairil and Mohd Naeem, Saripan (2009) Investigation on mechanical properties of ABS using rapid rpototyping technology and injection molding process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wani, Sharyar and Adam, Mutasim Elsadig and Abdullahi, Husein Osman and Ibrahim, Jamaludin (2012) Impact of parallel projects management. International Journal of Humanities and Social Science, 2 (23). pp. 88-91. ISSN 2221-0989 (O), 2220-8488 (P)

Y

Yaali, Syarel Azill and Ayob, Mohd Fairullazi (2018) Developing KAED’s expert database. Other. UNSPECIFIED. (Unpublished)

Yap, Wen Jiun and Asrar, Waqar and Mawlood, Mahmood Khalid (2011) Higher-order compact finite difference schemes. In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 99-156. ISBN 978-967-418-020-1

Z

Zainan Nazri, Nurul Jannah and Fatah Yasin, Raudlotul Firdaus and Samsudin, Sofiah and Ghazali, Natirah Azira (2018) Cyclic process approach for disposing Islamic literature material in Malaysia: a study. In: 9th UUM International Legal Conference (ILC 2017), 23rd-24th September 2017, Sintok, Kedah.