Items where Division is "Kulliyyah of Engineering" and Year is 2024

Article

A Mohamed Zaki, Zakarya and Hassan Abdalla Hashim, Aisha (2024) Impact of varying datasets for prediction of COVID - 19 cases. International Journal of Science and Research (IJSR), 13 (4). pp. 430-435. E-ISSN 2319-7064

Abd Razak, Najihah and Azami, Muhammad Hanafi (2024) Investigation on regression rate behavior of polylactic acid manufactured by fused deposition modelling for hybrid rocket motor. Journaal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 157-165. ISSN 1990-7710

Abdul Latif, Samihah and Sidek, Khairul Azami and Abu Bakar, Eddyzulham and Hassan Abdalla Hashim, Aisha (2024) Online multimodal compression using pruning and knowledge distillation for iris recognition. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (2). pp. 68-81. ISSN 2462-1943

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam (2024) Influence of adhesive curing temperature and geometrical parameters on composite patch repair of cracked structures. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 119 (1). pp. 1-12. ISSN 2289-7879

Abdullah, Mohammad Aiman Hakim and Abdul Aziz, Ainul Husna and Engliman, Nurul Sakinah (2024) Comparison study between hydrothermal and coprecipitation method for green synthesize of magnetic silver nanoparticles. Chemical and Natural Resources Engineering Journal (Formally known as Biological and Natural Resources Engineering Journal), 8 (1). pp. 12-27. E-ISSN 2637-0719

Abdullah, Nur Azam (2024) BRICS membership enables Malaysia to progress with advanced tech. New Straits Times, 21 June 2024.

Abdullah, Nur Azam (2024) Kajian pergolakan udara ekstrem dalam pesawat perlu berterusan. Berita Harian, MukaSepuluh (26hb Mei 2024). p. 10.

Abdullah, Nur Azam (2024) Penyertaan BRICS pacu sektor aeroangkasa, AI. Berita Harian, 24 June 2024. p. 11.

Abdullah Hashim, Azrul Azim and Abdul Ghani, Nor Maniha and Ahmad, Salmiah and Nasir, Ahmad Nor Kasruddin (2024) System identification and control of linear electromechanical actuator using PI controller based metaheuristic approach. Applications of Modelling and Simulation, 8. pp. 213-224. E-ISSN 2600-8084

Abu Ubaidah, Afiq Syazwan and Mohamad Puad, Noor Illi and Azmi, Azlin Suhaida and Ahmad Nor, Yusilawati and Hamzah, Fazlena and Mohd Sofri, Nur Syazwani Nadhirah (2024) Bitter Cassava’s media composition screening experiment for maximizing callus formation frequency using Plackett Burnman design. Journal of Agrobiotechnology, 15 (1). pp. 23-36. ISSN 2180-1983

Ahamad, Firdaus Taqiyuddin and Abdul Malek, Norun Farihah and Roslan, Farah Sakiinah and Saidin, Norazlina and Islam, Md. Rafiqul and El Qasem, Nidal (2024) Enhanced antenna performance at 3.5 GHz with a compact and Intelligent Reflecting Surface. IIUM Engineering Journal, 25 (2). pp. 179-195. ISSN 1511-788X E-ISSN 2289-7860

Ahmad, Aeriyn D and Salam, Sameer and Mokhtar, Norrima and Arof, Hamzah and Apsari, Retna and Ahmed Hamida, Belal and Harun, Sulaiman Wadi (2024) Q-switched pulse generation in L-band region with polyacrylonitrile saturable absorber. Physica Scripta, 99 (6). pp. 1-9. ISSN 0031-8949 E-ISSN 1402-4896

Ahmad, Mahmood and Al-Mansob, Ramez Al-Ezzi Abduljalil and Ramli, Ahmad Bukhari and Ahmad, Feezan and Jehan Khan, Beenish (2024) Unconfined compressive strength prediction of stabilized expansive clay soil using machine learning techniques. Multiscale and Multidisciplinary Modeling, Experiments and Design, 7 (1). pp. 217-231. ISSN 2520-8160 E-ISSN 2520-8179

Ahmad Shah Hizam, Md Yasir and Sukindar, Nor Aiman and Ahmad Afif, Abdul Rahman Putra and Yang, Chuan Choong and Kamaruddin, Shafie and Aziz, Azlan and Aminanda, Yulfian and Sulaiman, Mohd Hafis (2024) Effect of heat treatment on mechanical properties and dimensional accuracy of 3D-Printed black carbon fiber HTPLA. Heliyon, 10 (11). ISSN 2405-8440

Ahmed, Iman Osman Mukhtar and Hassan Abdalla Hashim, Aisha and Ahmed, Zeinab E and Sophian, Ali (2024) The ethics of AI creativity: emerging challenges. Journal of Technology and Humanities, 5 (1). pp. 24-31. E-ISSN 2805-4431

Ahmed, Kazi Istiaque and Tahir, Mohammad and Lau, Sian Lun and Habaebi, Mohamed Hadi and Ahad, Abdul and Pires, Ivan Miguel (2024) Dataset for authentication and authorization using physical layer properties in indoor environment. Data In Brief, 55. pp. 1-11. ISSN 2352-3409

Ahmed, Zaheer and Hrairi, Meftah and Yazid, Zakwan (2024) Numerical evaluation of adhesive bonding quality using electromechanical impedance technique. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 122-135. ISSN 2289-7895

Al Husaini, Mohammed Abdulla Salim and Habaebi, Mohamed Hadi and Islam, Md Rafiqul (2024) Real-time thermography for breast cancer detection with deep learning. Discover Artificial Intelligence, 4 (N/A). pp. 1-21. ISSN N/A E-ISSN 2731-0809

Al Mahmud, Suaib and Kamarulariffin, Abdurrahman and Mohd Ibrahim, Azhar and Haja Mohideen, Ahmad Jazlan (2024) Advancements and challenges in mobile robot navigation: a comprehensive review of algorithms and potential for self-learning approaches. Journal of Intelligent & Robotic Systems, 110. pp. 1-24. ISSN 0921-0296 E-ISSN 1573-0409

Alam, Mohammad Shafiul and Elsheikh, Elfatih A. A. and Suliman, F. M. and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz (2024) Innovative strategies for early autism diagnosis: active learning and domain adaptation optimization. Diagnostics, 14 (6). pp. 2-18. ISSN 2075-4418

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdous (2024) Power of alignment: exploring the effect of face alignment on ASD diagnosis using facial images. IIUM Engineering journal, 25 (1). pp. 317-327. ISSN 1511-788X E-ISSN 2289-7860

Aldaas, Aseel and Alam, Md. Zahangir and Azmi, Azlin Suhaida (2024) Acidic-enzymatic co-treatment of food waste for high sugar recovery and biogas production. Jurnal Teknology, 86 (2). pp. 1-7. ISSN 0127-9696 E-ISSN 2180-3722

Alli, Yakubu Adekunle and Bamisaye, Abayomi and Nancy, Parvathy and Zachariah, Suji Mary and Oladoye, Peter and Bankole, Owolabi Mutolib and Akamo, Damilola O. and Chkirida, Soulaima and Anuar, Hazleen and Thomas, Sabu (2024) MXene composites: properties, synthesis and its emerging application in rechargeable batteries. Journal of Energy Storage, 77. pp. 1-21. ISSN 2352-152X E-ISSN 2352-1538

Amir, Dzilal and Nasaruddin, Ricca Rahman and Yousefi, Maryam and Mastuli, Mohd Sufri and Sulaiman, Sarina and Alam, Md. Zahangir and Engliman, Nurul Sakinah (2024) Investigating the synthesis parameters of durian skin-based activated carbon and the effects of silver nanocatalysts on its recyclability in methylene blue removal. Discover Nano, 19 (32). pp. 1-23. E-ISSN 2731-9229

Anjum, Asraar and Hrairi, Meftah and Aabid, Abdul and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Examining the efficacy of finite element method for detecting damage in aluminium structures. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 110-121. ISSN 2289-7895

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Civil structural health monitoring and machine learning: a comprehensive review. Frattura ed Integrita Strutturale, 18 (69). pp. 43-59. E-ISSN 1971-8993

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Damage detection in concrete structures with impedance data and machine learning. Bulletin of the Polish Academy of Sciences: Technical Sciences, 72 (3). pp. 1-11. ISSN 0239-7528 E-ISSN 2300-1917

Anuar, Farhana Nur Danisyah Mohd Anuar and Ghasi Mahaboobali, Fharukh Ahmed and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2024) Effect of cavity geometry and location on base pressure in a suddenly expanded flow at mach 2.0 for area ratio 3.24. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 1-21. E-ISSN 2289-7895

Ariff, Tasnim Firdaus and Sakib, Mohammad Nazmus (2024) Machinability of Inconel 718 in MQL turning using hybrid microwaved silicon nitride inserts. Jurnal Tribologi, 42. pp. 216-230. ISSN 2289-7232 E-ISSN 2289-7232

Arifin, Fatchul and Nasuha, Aris and Priambodo, Ardy Seto and Winursito, Anggun and Gunawan, Teddy Surya (2024) Advanced multimodal emotion recognition for Javanese language using deep learning. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 12 (3). pp. 503-515. ISSN 2089-3272

Ashraf, Arselan and Gunawan, Teddy Surya and Kartiwi, Mira and Nur, Levy Olivia and Nugroho, Bambang Setia and Astuti, Rina Pudji (2024) Advancements and challenges in scalable modular antenna arrays for 5G Massive MIMO networks. IEEE Access, 12. pp. 57895-57916. E-ISSN 2169-3536

Asmaly, Hamza A. and Kabbashi, Nassereldeen Ahmed and Al-Khatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Mohd Khairuddin, Nur Farahah (2024) Optimizing 2-nitrophenol and chromium adsorption from water with aluminium oxide via response surface methodology. Knowledge-based Engineering and Sciences, 5 (1). pp. 98-119. ISSN 2788-7820 E-ISSN 2788-7839

Azami, Muhammad Hanafi (2024) Euclid: misi merungkai misteri besar alam semesta. Risalah Falak. p. 14.

Azmi, Nur Hanisah and Nordin, Anis Nurashikin and Suhaimi, Muhammad Irsyad and Ming, Lim Lai and Ab Rahim, Rosminazuin and Samsudin, Zambri and Md Ralib @ Md Raghib, Aliza 'Aini (2024) Flexible potentiostat readout circuit for electrochemical sensors. Indonesian Journal of Electrical Engineering and Informatics, 12 (2). pp. 333-343. E-ISSN 2089-3272

Baba, Tamana and Husni, Muhammad Hazeeq and Saidin, Norazlina and Hasbullah, Nurul Fadzlin (2024) Effect of proton radiation on gallium nitride light emitting diodes. Bulletin of Electrical Engineering and Informatics, 13 (1). pp. 194-201. ISSN 2089-3191 E-ISSN 2302-9285

Baba, Tamana and Siddiqui, Naseeb Ahmed and Saidin, Norazlina and Md Yusoff, Siti Harwani and Abdul Sani, Siti Fairus and Abdul Karim, Julia and Hasbullah, Nurul Fadzlin (2024) Radiation-induced degradation of silicon carbide MOSFETs – a review. Materials Science & Engineering: B, 300. pp. 1-13. ISSN 0921-5107 E-ISSN 1873-4944

Badran, Marwan Atef and Toha @ Tohara, Siti Fauziah (2024) Employment of artificial intelligence (AI) techniques in battery management system (BMS) for electric vehicles (EV): issues and challenges. Pertanika Journal Science and Technology, 32 (2). pp. 859-881. ISSN 0128-7680 E-ISSN 2231-8526

Baghdadi, Faical and Hrairi, Meftah and Asrar, Waqar (2024) A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6). pp. 157-168. E-ISSN 2180 - 1363

Bahamid, Alala and Mohd Ibrahim, Azhar and Shafie, Amir Akramin (2024) Crowd evacuation with human-level intelligence via neuro-symbolic approach. Advanced Engineering Informatics, 60. pp. 1-17. ISSN 1474-0346

Basahel, Ahmed Abdullah and Islam, Md Rafiqul and Habaebi, Mohamed Hadi (2024) 6G networks: insights and reliability analysis. Bulletin of Electrical Engineering and Informatics, 13 (6). pp. 4048-4057. ISSN 2089-3191 E-ISSN 2302-9285

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Chaudhari, Pavan Bhaskar and Arakerimath, Rachayya and Pathan, Khizar Ahmed and Khan, Sher Afghan (2024) Comparative experimental analysis and performance optimization of single-cylinder DI and HCCI engine with series catalytic converters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 121 (1). pp. 173-187. ISSN 2289-7879

Chowdhury, Israth Jahan and Yusoff, Siti Hajar and Gunawan, Teddy Surya and Ahmad Zabidi, Suriza and Abu Hanifah, Mohd Shahrin and Mohd Sapihie, Siti Nadiah and Pranggono, Bernardi (2024) Analysis of model predictive control-based energy management system performance to enhance energy transmission. Energies, 17 (11). pp. 1-19. E-ISSN 1996-1073

Daud, Muhamad Aliff Imran and Ahmad Puzi, Asmarani and Sidek, Shahrul Na'im and Abu Hassan, Salmah Anim and Zainuddin, Ahmad Anwar and Mohd Khairuddin, Ismail and Abd Mutalib, Mohd Azri (2024) Mechanomyography in assessing muscle spasticity: a systematic literature review. Journal Of Mechatronics And Intelligent Manufacturing (Mekatronika), 6 (1). pp. 92-103. E-ISSN 2637-0883

Daud, Muhamad Aliff Imran and Ahmad Puzi, Asmarani and Sidek, Shahrul Na'im and Zainuddin, Ahmad Anwar and Mohd Khairuddin, Ismail and Abd Mutalib, Mohd Azri (2024) Leveraging mechanomyography signal for quantitative muscle spasticity assessment of upper limb in neurological disorders using machine learning. International Journal of Advanced Computer Science and Applications (IJACSA), 15 (8). pp. 991-1002. ISSN 2158-107X E-ISSN 2156-5570

Dhahbi, Sami and Saleem, Nasir and Gunawan, Teddy Surya and Bourouis, Sami and Ali, Imad and Trigui, Aymen and Algarni, Abeer D (2024) Lightweight real-time recurrent models for speech enhancement and automatic speech recognition. International Journal of Interactive Multimedia and Artificial Intelligence, 8 (6). pp. 74-85. ISSN 1989-1660

Dhairiyasamy, Ratchagaraja and Rajendran, Silambarasan and Khan, Sher Afghan and Alahmadi, Ahmad Aziz and Alwetaishi, Mamdooh and A˘gbulut, Ümit (2024) Enhancing thermal efficiency in flat plate solar collectors through internal barrier optimization. Thermal Science and Engineering Progress, 54. pp. 1-15. ISSN N/A E-ISSN 2451-9049

Efeoglu, Ihsan and Maleque, Md. Abdul and Gulten, Gokhan and Yesilyurt, Mustafa and Yaylali, Banu and Totik, Yasar and Kalam, Md Abul and Haji Hassan, Masjuki and Zulkifli, Nurin Wahidah (2024) Nb-doped hydrogenated diamond-like carbon coated biodiesel injectors material: Synthesis, structure and properties. Diamond and Related Materials, 149. pp. 1-10. ISSN 0925-9635

Elgharbawy, Amal A.M. and Khan, Huma Warsi and Mohd Noor, Najihah and Syed Putra, Sharifah Shahira and Engku Ismail, Engku Normi and Hizaddin, Hanee Farzana and Hayyan, Maan and Hayyan, Adeeb and Basirun, Wan Jefrey and Moniruzzaman, Muhammad and Al-afandi, Lama and Abdullah Sani, Muhamad Shirwan (2024) Antibacterial performance enhancement using hydrophobic deep eutectic solvents: COSMO-RS prediction, experimental validation, and synergistic action with antibiotics. Journal of Molecular Liquids, 396. pp. 1-14. ISSN 0167-7322 E-ISSN 1873-3166

Ellappan, Sivakumar and Rajendran, Silambarasan and Dhairiyasamy, Ratchagaraja and Al-Mdallal, Qasem M and Khan, Sher Afghan and Asif, Mohammad and Dixit, Saurav and Ağbulut, Ümit (2024) Experimental investigation of ternary blends on performance, and emission behaviors of a modified low-heat rejection CI engine. Case Studies in Thermal Engineering, 60. pp. 1-11. E-ISSN 2214-157X

Eltahir Mohamed, Eltahir idris and Elsheikh, Elfatih A A and Islam, Md Rafiqul and Hassan Abdalla Hashim, Aisha and Habaebi, Mohamed Hadi and Zyoud, Alhareth Mohammed and Hamdan, Mosab (2024) Sand and dust storm attenuation prediction using visibility and humidity measurements. IEEE Access, 12. pp. 79602-79612. ISSN 2169-3536

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

Engliman, Nurul Sakinah and Abdul Aziz, Ainul Husna and Abdul, Peer Mohamed and Indera Luthfi, Abdullah Amru and Md Jahim, Jamaliah and Jamali, Nur Syakina (2024) Biohydrogen production in semicontinuous system using immobilized cell membrane. IIUM Engineering Journal, 25 (2). pp. 32-45. ISSN 1511-788X E-ISSN 2289-7860

Engliman, Nurul Sakinah and Jamali, Nur Syakina (2024) Effect of pH, temperature and agitation on thermophilic biohydrogen production using immobilized cells on carbon composites (GAC-NiFe3O4). Chemical Engineering Journal, 485. pp. 1-11. ISSN 1385-8947

Esa, Noor Yusriah and Wan Azahar, Wan Nur Aifa and Kasim, Norhidayu and Basri, Nur Khairiyah (2024) Comparison of the mechanical performance of dense grading and porous grading mixture utilized with crumb rubber modified binder. IIUM Engineering Journal, 25 (1). pp. 128-141. ISSN 1511-788X E-ISSN 2289-7860

Fakhrul Anwar, Nur Irdina and Za'bah, Nor Farahidah and Md Ralib @ Md Raghib, Aliza 'Aini (2024) Ripeness assessment and quality control of mango gold susu using an e-nose system. Asian Journal of Electrical and Electronic Engineering, 4 (2). pp. 35-42. E-ISSN 2785-8189

Fayaz, Hussain and Ramesh, S. and Afzal, Asif and Agbulut, Ümit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. pp. 1-15. E-ISSN 2451-9049

Ganat, Tarek A. and Hrairi, Meftah and Badawy, Amr and Khosravi, Vahid and Abdalla, Mohammed (2024) Advancing sandstone reservoir compressibility prediction: A correlation-driven methodology. Petroleum Research, 9 (2). pp. 273-279. ISSN 2096-2495 E-ISSN 2524-1729

Haddad, Alaa and Habaebi, Mohamed Hadi and Elsheikh, Elfatih A A and Islam, Md Rafiqul and Ahmad Zabidi, Suriza and M Suliman, Fakher Eldin (2024) E2EE enhanced patient-centric blockchain-based system for EHR management. PLoS ONE, 19 (4). pp. 1-21. ISSN 1932-6203

Hafizalshah, Muhammad Hariz and Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2024) Developing decision-making serious games using Ren’Py visual novel engine. International Journal of Electrical and Computer Engineering (IJECE), 14 (5). pp. 5458-5466. ISSN 2088-8708 E-ISSN 2722-2578

Hafizalshah, Muhammad Hariz and Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im and Md. Yusof, Hazlina (2024) Enhancing decision-making based on social responses for Human-Robot Interactions (HRI) applications. JOURNAL OF MECHATRONICS AND INTELLIGENT MANUFACTURING, 6 (1). pp. 7-18. E-ISSN 2637-0883

Haja Mohideen, Ahmad Jazlan (2024) Making STEM relatable to students. The Star.

Hamza, Manar Ahmed and Hassan Abdalla Hashim, Aisha and Motwakel, Abdelwahed and Elhameed, Elmouez Samir Abd and Osman, Mohammed and Kumar, Arun and Singla, Chinu and Munjal, Muskaan (2024) Robust tweets classification using arithmetic optimization with deep learning for sustainable urban living. SN Computer Science, 5 (5). pp. 1-11. ISSN 2662-995X E-ISSN 2661-8907

Haniman, Adilan and Elgharbawy, Amal A.M. and Hayyan, Adeeb and Wae-Hayee, Makatar and Mohd Noor, Nurul Auni and Jawahar, Bassam Mohamed and Hussain, Mahmud and Dewi, Ika Atsari (2024) Clean extraction of pectin from dragon fruit peels, pomelo peels, okra, and pineapple peels using deep eutectic solvents and ionic liquids. HALALSPHERE, 4 (1). pp. 23-33. E-ISSN 2773-6040

Hariyanto, Didik and Rafiq, Arif Ainur and Gunawan, Teddy Surya and Quynh, Nguyen Vu (2024) Exploring the research trends and development of augmented reality and virtual reality in ASEAN countries: a bibliometric study. International Journal of Electrical and Computer Engineering (IJECE), 14 (4). pp. 4430-4444. ISSN 2088-8708 E-ISSN 2722-2578

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar (2024) Numerical prediction of trailing edge noise at low Reynolds number with modified trailing edges of a NACA 0015 airfoil. CFD Letters, 16 (8). pp. 64-94. ISSN 2180-1363 E-ISSN 2180-1363

Hassan, Mohamed Ibren and Asrar, Waqar and Ismail, Muhammad Ariffuddin and Andan, Amelda Dianne (2024) Experimental investigation on the aerodynamic parameters of trailing edge wake generators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 1-16. ISSN 2289-7879

Hisham, Firzanah and Mohd Hatta, Maziati Akmal and Ahmad, Farah and Ahmad, Kartini and Samat, Noorasikin (2024) Biopolymer chitosan: potential sources, extraction methods, and emerging applications. Ain Shams Engineering Journal, 15 (2). pp. 1-11. ISSN 2090-4479 E-ISSN 2090-4495

Hossain, Fahmida and Hossain, A. K. M. Zakir and Ibrahimy, Muhammad Ibn and Jamil Alsayaydeh, Jamil Abedalrahim (2024) Design and performance evaluation of a 6×6 MIMO array with partial ground plane for sub-6 GHz mobile applications. International Journal of Intelligent Engineering and Systems, 17 (1). pp. 612-623. ISSN 2185-310X E-ISSN 2185-3118

Ibrahim, Muhammad Hilmi and Mohd Yasin, Mohd Fairus and Mohamad Pauzi, Muhamad Zulfan Allif and Hamzah, Norikhwan and Mohd Yusop, Mohd Zamri and Mukri, Mohd ‘Azizir-Rahim and Shudin, Nasrat Hannah and Ani, Mohd Hanafi and Zainol Abidin, Mohd Shukur (2024) Transient size analysis of carbon nanotube synthesized in diffusion flame environment. Evergreen, 11 (1). pp. 386-393. ISSN 2189-0420 E-ISSN 2432-5953

Idros, Syed and Abdullah, Muhammad and Toha @ Tohara, Siti Fauziah and Md Said, Mohamad Syazarudin (2024) Modelling of vehicle longitudinal dynamics for speed control. Journal of Advanced Research in Applied Mechanics, 123 (1). pp. 56-74. E-ISSN 2289-7895

Iskandar Tuah, Hanis Humaira and Alam, A. H. M. Zahirul (2024) Design of a Wilkinson Power Divider with harmonic suppression for mobile application. Asian Journal of Electrical and Electronic Engineering, 4 (1). pp. 29-35. E-ISSN 2785-8189

Jafri, Nur Huda Syazwani and Asri, Arif and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2024) PVA-PEG hydrogel incorporated with cellulose nanofibril of oil palm empty fruit bunches and antibacterial agent curcumin. Journal of Pharmacy, 4 (1). pp. 116-128. E-ISSN 2773-5664

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2024) Effect of incorporating cellulose nanofibers and lemongrass essential oil in polyvinyl alcohol-polyethylene glycol/glycerin hydrogel for wound dressing. IIUM Engineering Journal, 25 (2). pp. 99-115. ISSN 1511-788X E-ISSN 2289-7860

Jilte, Ravindra and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Venkatesan, Elumalai Perumal and Munimathan, Arunkumar (2024) Cooling performance of a Li-ion cylindrical battery pack with liquid circulating pipes embedded in phase change material. Journal of Energy Storage, 87 (111335). pp. 1-15. ISSN 2352-152X

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza and Hasham, Rosnani (2024) Microencapsulation of Acalypha indica Linn. Extracts using chitosan-polycaprolactone blends. Pertanika Journal of Science & Technology, 32 (2). pp. 741-760. ISSN 0128-7680 E-ISSN 2231-8526

Kamarozaman, Nurul Farhana Husna and Badron, Khairayu and Ismail, Ahmad Fadzil and Islam, Md. Rafiqul (2024) Fade duration analysis on a Ka-band link operating in the tropical region. Journal of Electrical Systems, 20 (4). pp. 1790-1797. ISSN 1112-5209

Kamaruddin, Amirul Faiz and Zahaba, Maryam and Tamsi, Nur Sarah Fatihah and Anua, Mohd Khusainy and Hassan, Noor Artika and Nordin, Nur Sazwi and Ariffin, Arman (2024) A comparative study on indoor air quality (IAQ) between centralised and split unit air conditioning systems in a naval ship. Defence S and T Technical Bulletin, 17 (1). pp. 28-36. ISSN 1985-6571 E-ISSN 3009-1896

Kasim, Norhidayu (2024) Perketat penguasaan urus sampah elak banjir kilat di bandar. Berita Harian, Komentar (7hb Oktober 2024). p. 11.

Kasim, Norhidayu (2024) Perketat peraturan pembangunan di lokasi risiko wujud lubang benam. Berita Harian, Komentar (28hb Ogos 2024). p. 11.

Khadiza, Akter and Motakabber, S. M. A. and Zahirul Alam, A. H. M. and Yusoff, Siti Hajar (2024) Design and investigation of high power quality PV fed DC-DC boost converter. Advances in Electrical Engineering, Electronics and Energy.

Khalaf, Ayesheh Ahrari and Hassan Abdalla Hashim, Aisha and Olowolayemo, Akeem (2024) Mutual character dialogue generation with semi‑supervised multitask learners and awareness. International Journal of Information Technology, 16 (3). pp. 1357-1363. ISSN 2511-2104 E-ISSN 2511-2112

Khan, Ambareen and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Aabid, Abdul and Baig, Muneer (2024) Base pressure control with semi-circular ribs at critical mach number. Fluid Dynamics & Materials Processing, 20 (9). pp. 2007-2028. ISSN 1555-2578

Khan, Ambareen and Khan, Sher Afghan and Raja, Vijayanandh and Aabid, Abdul and Baig, Muneer (2024) Effect of ribs in a suddenly expanded flow at sonic Mach number. Heliyon, 10. pp. 1-17. ISSN 2405-8440

Khan, Mohd Hamzah and Habaebi, Mohamed Hadi and Islam, Md Rafiqul (2024) A systematic literature review of cloud brokers for autonomic service distribution. IEEE Access, 12. pp. 131164-131187. E-ISSN 2169-3536

Mahmod Attar Bashi, Zainab Senan and Basri, Atikah Balqis and Senan, Shayma (2024) Next-Generation Hotspot (NGH): advancing automatic roaming and seamless wi-fi network logins. International Journal on Perceptive and Cognitive Computing, 10 (2). pp. 87-91. E-ISSN 2462-229X

Mahmud, Mudrikah Sofia and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2024) Partial replacement of silica nanoparticles in cement paste for CO2 regeneration capture application. IIUM Engineering Journal, 25 (2). pp. 299-308. ISSN 1511-788X E-ISSN 2289-7860

Mahzari, Mohammad and Hassan Abdalla Hashim, Aisha and Saeed, Khalid M. Osman and Mokhtar, Mohammed M. Osman (2024) Two-person intuitionistic neutrosophic soft games with harris hawks optimizer based tweets classification on NLP applications. International Journal of Neutrosophic Science, 24 (1). pp. 314-326. ISSN 2692-6148 E-ISSN 2690-6805

Maizal Hairi, Nur Iffah Irdina and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Mohamad Yunos, Muhammad Farhan Affendi and Ming, Lim Lai and Tung, Lun Hao and Samsudin, Zambri (2024) Recent advance in using eco-friendly carbon-based conductive ink for printed strain sensor: a review. Cleaner Materials, 12. pp. 1-19. ISSN 2772-3976

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Malla, Pravanjan and Liu, Chi-Hsien and Wu, Wei-Chi and Nordin, Anis Nurashikin and Rath, Dharitri (2024) Magnetic metal-organic frameworks as sensitive aptasensors for coronavirus spike protein. Analytica Chimica Acta, 1309. pp. 1-10. ISSN 0003-2670 E-ISSN 1873-4324

Mardzuki, Muhammad Imran and Md Nor, Khairul Affendy and Nordin, Nor Hidayati Diyana (2024) Vibration suppression of multistorey building using adaptive tuned mass damper. PERINTIS eJournal, 14 (1). pp. 79-92. ISSN 2232-0725

Matter, Safaa S and Al Shaikhli, Imad F and Hassan Abdalla Hashim, Aisha and Soliman, Amr Mohmed and Abdellatief, Walaa A and Ahmed, Abdelmoty M and Khattab, Mahmoud M (2024) Wireless community networks from routing perspective: a systematic review. IAENG International Journal of Computer Science, 51 (7). pp. 852-867. ISSN 1819-656X E-ISSN 1819-9224

Mauludin, Mochamad Subchan and Khairudin, Moh. and Asnawi, Rustam and Mustafa, Wan Azani and Toha, Siti Fauziah (2024) The advancement of artificial intelligence's application in hybrid solar and wind power plant optimization: a study of the literature. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (2). pp. 279-293. ISSN 2462-1943

Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Kamdi, Zakiah and Muhammad, Noorhafiza and Azhari, Azmir (2024) The preheating effect of mild steel layers deposited using SMAW at 100 A and 70 A. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 112-120. E-ISSN 2289-7895

Mohamad Anuar, Mai Nurul Fareesya and Sujana, Mohammad Juani and Ismail, Izham Izzat and Azami, Muhammad Hanafi (2024) Experimental evaluation on the effects of energetic additives in the hybrid rocket fuel. Journal of Transport System Engineering, 11 (1). pp. 13-21. E-ISSN 2289–9790

Mohamad Jamil, Nur Arifah and Abd Razak, Najihah and Ismail, Izham Izzat and Nordin, Norhuda Hidayah and Azami, Muhammad Hanafi (2024) Composition, characterization and performance studies of hybrid rocket motor doped with metallic additives and high entropy alloy. Journal of Aeronautics, Astronautics and Aviation,, 56 (4). pp. 887-894. ISSN 1990-7710

Mohamad Puad, Noor Illi and Ibrahim, Soumayat Ali and Azmi, Azlin Suhaida and Abduh, Muhammad Yusuf (2024) The influence of plant growth regulators and light supply on bitter cassava callus initiation for starch production. IIUM Engineering Journal, 25 (1). pp. 1-11. ISSN 1511-788X E-ISSN 2289-7860

Mohamad Talhah Al Hafiz, Mohd Khata and Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Muhammad Fikri, Zawawi and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823-7010 E-ISSN 2600-7444

Mohamad Yusoff, Muhammad Annuar Alhadi and Azmi, Nur Liyana and Nordin, Nor Hidayati Diyana (2024) A wheelchair sitting posture detection system using pressure sensors. IIUM Engineering Journal, 25 (1). pp. 302-316. ISSN 1511-788X E-ISSN 2289-7860

Mohamed Ali, Mohamed Khalil Abdalla and Aisha, Hassan Abdalla Hashim and Khalifa, Othman Omran (2024) Load control between PV power plants and diesel generators. IJCSNS International Journal of Computer Science and Network Security, 24 (6). pp. 33-40. ISSN 1738-7906

Mohamed Isa, Siti Suzilliana Putri and Balakrishnan, Nanthini and Ahmad, Kartini and Md. Arifin, Norihan and Md Ali, Fadzilah (2024) The properties of the physical parameters in the triple diffusive fluid flow model. CFD Letters, 16 (11). pp. 133-145. ISSN 2180-1363

Mohamed Isa, Siti Suzilliana Putri and Mohd Azmi, Hazirah and Balakrishnan, Nanthini and Mohamad Nazir, Aina Suhaiza and Ahmad, Kartini and Ismail, Nurul Syuhada and Md Arifin, Norihan and Rosali, Haliza (2024) The Soret-Dufour effects on three-dimensional magnetohydrodynamics Newtonian fluid flow over an inclined plane. CFD Letters, 16 (9). pp. 39-51. ISSN 2180-1363

Mohammad Abir, Intiaz and Mohd Ibrahim, Azhar and Toha, Siti Fauziah and Mohd Romlay, Muhammad Rabani (2024) Modelling and simulation of assisted hospital evacuation using fuzzy-reinforcement learning based modelling approach. Neural Computing and Applications. pp. 1-30. ISSN 0941-0643 E-ISSN 1433-3058

Mohd Fadzely, Amir Hafiz and Ahmad, Farah and Mat Harttar @ Mohd Hatta, Maziati Akmal (2024) Novel Rhizophus oryzae esterase-immobilized chitosan/carbon nanomaterials as sensing support for enzyme inhibition-based biosensor in the detection of organophosphorus pesticide residues on crops. Journal of Natural Pesticide Research, 10. pp. 1-13. E-ISSN 2773-0786

Mohd Jamaludin, Nina Farhana and Abdullah, Luqman Chuah and Idrus, Syazwani and Engliman, Nurul Sakinah and Tan, Jian Ping and Jamali, Nur Syakina (2024) Nickel-iron doped on granular activated carbon for efficient immobilization in biohydrogen production. Bioresource Technology, 391. pp. 1-11. ISSN 0960-8524 E-ISSN 1873-2976

Mohd Khata, Mohamad Talhah Al Hafiz and Sukindar, Nor Aiman and Zawawi, Muhammad Fikri and Md Yasir, Ahmad Shah Hizam and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using dlp 3d printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823 7010 E-ISSN 2600 7444

Mohd Nawawi, Muhammad Muizz and Sidek, Khairul Azami and Azman, Amelia Wong (2024) ECG in real world scenario: time variability in biometric using wearable smart textile shirts. Journal of Advanced Research in Applied Sciences and Engineering Technology, 40 (2). pp. 36-49. ISSN 2462-1943

Mohd Noor, Nurul Muthmainnah and Ahmad Razali, Zarith Sofia and Mahmod@Wahab, Rohidatun and Ahmad, Salmiah (2024) Designing an autonomous mobile robot based on rocker-bogie concept for terrain purposes. Malaysian Journal of Science and Advanced Technology, 4 (2). pp. 84-91. E-ISSN 2785-8901

Mohd Razib, Mohd Asyraf and Abdul Rahman, Dalila and Rana, Masud and Saleh, Tanveer (2024) Field electron emission properties of tip bended carbon nanotubes (CNTs). PERINTIS, 14 (1). pp. 1-7. ISSN 2232-0725

Mohd Sofri, Nur Syazwani Nadhirah and Mohamad Puad, Noor Illi and Nik Ahmad Sabri, Nik Nurul Adnina and Abu Ubaidah, Afiq Syazwan and Hamzah, Fazlena and Abduh, Muhammad Yusuf (2024) Initiation of cassava callus culture and its prospect for starch production: a systematic mapping study. Pertanika Journal of Tropical Agricultural Science, 47 (3). pp. 781-800. ISSN 1511-3701 E-ISSN 2231-8542

Mohd Yusof, Najiha 'Izzaty and Sophian, Ali and Mohd Zaki, Hasan Firdaus and Bawono, Ali Aryo and Embong, Abd Halim and Ashraf, Arselan (2024) Assessing the performance of YOLOv5, YOLOv6, and YOLOv7 in road defect detection and classification: a comparative study. Bulletin of Electrical Engineering and Informatics, 13 (1). pp. 350-360. ISSN 2089-3191 E-ISSN 2302-9285

Mohd Zaki, Syazwani (2024) Gelling together. Materials World, 12 (6). pp. 38-40. ISSN 0967-8638

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Comprehensive analysis of geometric hole designs and configurations in film cooling for gas turbine engines: a critical review. Journal of Aeronautics, Astronautics and Aviation, 56. pp. 187-218. ISSN 1990-7710

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Numerical investigation of heat transfer enhancement via dimpled target surface configuration and jet arrangement in impingement cooling. Journal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 93-106. ISSN 1990-7710

Mohmad Latfi, Megat Ashmann Keiflee and Nordin, Nor Hidayati Diyana and Jasni, Farahiyah (2024) Identification of active human upper limb muscle for intention detection activity. PERINTIS eJournal, 14 (1). pp. 67-78. ISSN 2232-0725

Mokhtar, Nadiah and A. Aziz, Edriyana and Aris, Azmi and Shukor, Hafiza and Mohd Zaki, Syazwani (2024) Biosorption of anionic and cationic azo dye onto red macro alga: determination of the significant variables using resolution V fractional factorial design. Physics and Chemistry of the Earth, 134. pp. 1-12. ISSN 1474-7065

Motakabber, S. M. A. and Alam, A. H. M. Zahirul and Kamal, Khairul Izham (2024) Modelling and control of a Magnetic Levitation System. ASIAN JOURNAL OF ELECTRICAL AND ELECTRONIC ENGINEERING, 4 (1). pp. 9-16. E-ISSN 2785-8189

Motakabber, S. M. A. and Rokon, M. I. R. and Alam, A. H. M. Zahirul and Islam, G. Z. and Matin, M. A. and Mahmud, Md (2024) Advancing system integration: verilog-based hardware implementation of an asic interface for three amba processors. IIUM Engineering Journal, 25 (1). pp. 253-262. ISSN 1511-788X E-ISSN 2289-7860

Motakabber, S. M. A. and Zahirul Alam, A. H. M. and Mominul Hoque, Md. (2024) A comparative study between transformer coupled un-tuned and tuned power derivative circuits for ultrasonic cleaning system. Asian Journal of Electrical and Electronic Engineering, 4 (2). E-ISSN 2785-8189

Murugaya, Kartigesan and Misdan, Nurasyikin and Awang, Nuha and Ling, How Hua and Madon, Rais Hanizam and Hairom, Nur Hanis Hayati and Razali, Nor Faizah and Yusof, Norhaniza and Jaafar, Juhana and Md Nordin, Nik Abdul Hadi and Ali, Fathilah (2024) Preparation and characterizations of triptycene integrated poly (arylene ether sulfone) based block and random copolymers. International Journal of Engineering Trends and Technology, 72 (2). pp. 133-141. ISSN 2231–5381

Nagoor Gunny, Ahmad Anas and K Prammakumar, Nimaal and Ahmad, Abdul Aziz and C.B. Gopinath, Subash and Abu Bakar, Amirul Ridzuan and Musa, Haliru and Che Mat, Mohd Hishamuddin (2024) Exploring antioxidant and antidiabetic potential of Mutingia calabura (Kerukupsiam) leaf extract: in vitro analysis and molecular docking study. Results in Chemistry, 7. pp. 1-9. E-ISSN 2211-7156

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

Nedjai, Radhia and Al-Mamun, Abdullah and Alam, Md Zahangir (2024) Effects of initial turbidity and myco-coagulant dose on the effectiveness of the coagulation process in water treatment. Applied Chemical Engineering, 7 (2). pp. 1-9. E-ISSN 2578-2010

Nedjai, Radhia and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Al-Khatib, Ma'an Fahmi Rashid and Tahreen, Amina and Mamun, Abdullah Al (2024) Adsorption performance of fixed-bed columns for the removal of phenol using baobab fruit shell based activated carbon. IIUM Engineering Journal, 25 (1). pp. 59-71. ISSN 1511-788X E-ISSN 2289-7860

Omar, Mohamad Firdaus and Ali, Fathilah and Jami, Mohammed Saedi and Azmi, Azlin Suhaida and Ahmad, Farah and Marzuki, Mohd Zahid and Jamaluddin, Jamarosliza (2024) Continuous flow bead-milling impact on sulfur curing for advanced elastomeric rubber composites. IIUM Engineering Journal, 25 (2). pp. 83-98. ISSN 1511-788X E-ISSN 2289-7860

Pakry, Nur Amalina and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2024) Effect of material properties on the behaviour of cross-ply laminated cylindrical shells under thermo-mechanical load. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 51-65. E-ISSN 2289-7895

Pan, Chunlan and Alqahtani, Aisha M. and Wei, Haoran and Sulaiman, Nadzril and Elsiddieg, Awatif M.A. and Ghoushchi, S.P. (2024) Heat transfer enhancement of a heat exchanger using novel multiple perforated magnetic turbulators (MPMT): an experimental study. International Journal of Thermal Sciences, 195 (1). pp. 1-9. ISSN 1290-0729 E-ISSN 1778-4166

Pebrianti, Dwi and Ahmad, Denis and Bayuaji, Luhur and Wijayanti, Linda and Mulyadi, Melisa (2024) Using content-based filtering and apriori for recommendation systems in a smart shopping system. Indonesian Journal of Computing, Engineering and Design, 6 (1). pp. 58-70. ISSN 2656-1972 E-ISSN 2656-8179

Pebrianti, Dwi and Kurniawan, Haris and Bayuaji, Luhur and Rusdah, Rusdah (2024) XgBoost hyper-parameter tuning using Particle Swarm Optimization for stock price forecasting. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 9 (4). pp. 1179-1195. ISSN 2338-3070 E-ISSN 2338-3062

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue and methyl orange dye by using the core-shell structure of Fe3O4@ZnS nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 42-55. ISSN 2756-8210

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue dye by using different nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 1-17. ISSN 2756-8210

Pratama, Maulana Krisna Bayu and Dewi, Yulia Puspita and Kusumawati, Tri Ika Jaya and Pebrianti, Dwi (2024) Designing a laboratory assistant attendance system using Radio Frequency Identification (RFID) technology based on IOT. Jurnal Inovasi danTeknologi Pembelajaran, 11 (1). pp. 43-54. ISSN 2406-8780 E-ISSN 2654-7953

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

Rahman, Mohammed Ataur and Ihsan, Sany Izan (2024) Electricity generation of electric coaster in trapping solar heat. International Journal on Integration of Knowledge, 1 (2). pp. 1-14. E-ISSN 2990-9392

Rahman, Mohammed Ataur and Ihsan, Sany Izan and Ismail, Ahmad Faris and Altab, Hossain (2024) Fuel cell hybrid electric air-cushion tracked vehicle for peat swamp. International Journal of Heavy Vehicle System, 31 (4). pp. 513-530. ISSN 1744-232X E-ISSN 1741-5152

Rashid, Muhammad Mahbubur and Abd Razak, Mohamad Farhan and Hasan, Tahsin Fuad (2024) Analysis of impedance based sensor to discover the invasive nature of A549 lung cancer cell. Journal of Advanced Research in Applied Sciences and Engineering Technology, 41 (2). pp. 238-255. ISSN 2462-1943

Rashid, Muhammad Mahbubur and Salam, Syed Munimus (2024) Controlling the variable inertia of flywheel: a scientific review. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 4 (1). pp. 17-28. E-ISSN 2785-8189

Ridwan, Ridwan and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2024) Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 32-49. E-ISSN 2289-7879

Rossiter, John Anthony and Abdullah, Muhammad and Aftab, Muhammad Saleheen (2024) Improving the feedforward component for recent variants of predictive functional control. Processes, 12 (1). pp. 1-15. E-ISSN 2227-9717

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

Rozeman, Salfarina and Adesta, Erry Yulian Triblas and Sophian, Ali and Tomadi, Siti Haryani (2024) Selection of optimal bending types in die process of L-shaped panels considering the springback behaviours. International Journal of Engineering Materials and Manufacture, 9 (3). pp. 96-116. E-ISSN 0128-1852

Saadeldin, Abuelgasim and Rashid, Muhammad Mahbubur and Shafie, Amir Akramin and Hasan, Tahsin Fuad (2024) Real-time vehicle counting using custom YOLOv8n and DeepSORT for resource-limited edge devices. Telkomnika (Telecommunication Computing Electronics and Control), 22 (1). pp. 1-9. ISSN 1693-6930 E-ISSN 2087-278X

Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2024) Improving rotational stability and enhancing efficiency with variable inertial flywheels and magneto-rheological fluids. Asian Journal of Electrical and Electronic Engineering, 4 (1). pp. 1-8. E-ISSN 2785-8189

Salam, Syed Munimus and Rashid, Muhammad Mahbubur (2024) Magnetorheological fluid preparation using various carriers and study of their properties with decent durability. Journal of Advanced Engineering and Computation, 8 (2). pp. 86-96. ISSN 1859-2244 E-ISSN 2588-123X

Saleem, Nasir and Gunawan, Teddy Surya and Dhahbi, Sami and Bourouis, Sami (2024) Time domain speech enhancement with CNN and time-attention transformer. Digital Signal Processing, 147. pp. 1-12. ISSN 1051-2004 E-ISSN 1095-4333

Satriawan, Sukma and Setiawan, Agus and Pebrianti, Dwi and Md. Zain, Zainah (2024) The effect of pin length and compressive force in double side friction stir welding on bending strength of AA1100. Journal of Evrimata: Mechanical Engineering, 1 (1). pp. 9-13. E-ISSN XXXX-XXXX

Sethuraman, Vigneshvaran and Rajendran, Parvathy and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2024) Control of nozzle flow using rectangular ribs at sonic and supersonic mach numbers. Fluid Dynamics & Materials Processing, 20 (8). pp. 1847-1866. ISSN 1555-256X E-ISSN 1555-2578

Shabbir Ahmed, Omar and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2024) Parametric analysis of critical buckling in composite laminate structures under mechanical and thermal loads: a finite element and machine learning approach. Materials, 17 (17). pp. 1-27. E-ISSN 1996-1944

Shafie, Amir Akramin (2024) Tegakkan integriti, kesalahan bukti penyelidikan yang bertanggungjawab. Utusan Malaysia, Rencana (17hb Oktober 2024). p. 15. ISSN 2716-4494

Shahbuddin, Munira and Raja Alias, Raja A’isyah Syahirah and Shahbuddin, Dahlia and Ngah, Norhayati (2024) Elucidating the physicochemical properties of stingless bee honey as cryoprotectant and thermoregulated constituents. Chemical and Natural Resources Engineering Journal, 8 (1). pp. 28-40. E-ISSN 2637-0719

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Raheman, Md Abdul and Ibrahim, Yasser E. (2024) Enhancing aircraft crack repair efficiency through novel optimization of piezoelectric actuator parameters: a design of experiments and adaptive neuro-fuzzy inference system approach. Heliyon, 10 (11). pp. 1-27. ISSN 2405-8440 E-ISSN 2405-8440

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2024) Influence of sweep angle on the surface pressure of delta wing along pivot positions at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 172-191. ISSN 2289-7879

Shamsul Bahrin, Muhammad Ikmal Hakim and Md Yusof, Hazlina and Sidek, Shahrul Na'im and Ghazali, Aimi Shazwani (2024) An early investigation into raised-line tactile graphics reading behavior among blind and visually impaired individuals. Jurnal Kejuruteraan, 36 (3). pp. 1103-1125. ISSN 0128-0198 E-ISSN 2289-7526

Sharmin, Afsah and Motakabber, S M A and Hassan Abdalla Hashim, Aisha (2024) Trust-based enhanced ACO algorithm for secure routing in IoT. Indonesian Journal of Electrical Engineering and Informatics, 12 (2). pp. 344-359. E-ISSN 2089-3272

Siron @ Baharom, Khairul Nizam and Kow, Ren Yi and Md Amin, Nurul Ain Nadia and Low, Chooi Leng and Wahid, Azni Nabela and Jasni, Farahiyah and Abidin, Mohd Radhwan and Mustfar, Siti Nor Suzeana (2024) Shoulder arthroplasty: a bibliometric analysis using the Scopus database. Cureus, 16 (6). pp. 1-11. ISSN 2168-8184 E-ISSN 2168-8184

Sohu, Samiullah and Md Kassim, Tahara Ramadzan and Shahid Khan, Omar (2024) Critical risk factors influencing time schedule of residential projects in Pakistan. Engineering, Technology & Applied Science Research, 14 (1). pp. 12636-12639. ISSN 2241-4487 E-ISSN 1792-8036

Sohu, Samiullah and Md. Kassim, Tahara Ramadzan and Khan, Omar Shahid and Bhatti, Sajjad Ahmed and Sohoo, Arslan Ahmed (2024) Influential time and cost factors for commercial projects in the Malaysian construction industry. Engineering, Technology & Applied Science Research, 14 (3). pp. 14170-14174. ISSN 2241-4487 E-ISSN 1792-8036

Srikrishnan, Guruprasad and Shenbagamuthuraman, V. and Ağbulut, Ümit and Mishra, Ishani and Jain, Jesika and Balusamy, Saravanan and Chinnadurai, Karthick and Chatterjee, Dipankar and Shankar, E. and Shaik, Saboor and Hoang, Anh Tuan and Saleel, C Ahamed and Khan, Sher Afghan and Kasianantham, Nanthagopal (2024) Alcohol fuels in SI engines: a comprehensive state‑of‑the‑art review on combustion, performance, and environmental impacts. Journal of Thermal Analysis and Calorimetry, 154. pp. 1-63. ISSN 1388-6150 E-ISSN 1588-2926

Suhaimi, Muhammad Mukhlis and Ghazali, Aimi Shazwani and Haja Mohideen, Ahmad Jazlan and Hafizalshah, Muhammad Hariz and Sidek, Shahrul Na'im (2024) Enhancing prosthetic control: neural network classification of thumb muscle contraction using HD-sEMG signals. IIUM Engineering Journal, 25 (2). pp. 338-349. ISSN 1511-788X E-ISSN 2289-7860

Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Azhar, Muhammad Danial and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Sulaiman, Mohd Hafis and Haji Ahmad Sabli, Ahmad Syamaizar and Mohd Ariffin, Mohd Khairol Anuar (2024) Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum. Heliyon, 10 (4). pp. 1-13. ISSN 2405-8440

Syed Abdullah, Syed Idros and Zainuddin, Mohamed Al-Sideque and Abdullah, Muhammad and Tofrowaih, Khairul Amri (2024) Analysis of a simplified predictive function control formulation using first order transfer function for adaptive cruise control. International Journal Of Automotive And Mechanical Engineering, 21 (3). pp. 11641-11651. ISSN 2229-8649 E-ISSN 2180-1606

Syed Mohamed Ali, Jaffar and M.J.A ., Muhammad Nazri (2024) Optimization of composite fuselage frame layup for energy absorption under crash loading. Journal of Advanced Research in Applied Mechanics, 122 (1). pp. 111-129. E-ISSN 2289-7895

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah and Alam, Md. Zahangir (2024) Moringa Oleifera (MO) seed shell based adsorbent for potential CO2 capture: a characterization study. Malaysian Journal of Science, 43 (Special Issue 1). pp. 38-43. ISSN 1394-3065 E-ISSN 2600-8688

Tahreen, Amina and Jami, Mohammed Saedi and Ali, Fathilah and Nik Abdul Ghani, Nik Rashida and Nedjai, Radhia (2024) Investigation of enhanced electrocoagulation-membrane process for water reclamation from palm oil mill effluents. IIUM Engineering Journal, 25 (1). pp. 12-25. ISSN 1511-788X E-ISSN 2289-7860

Tarique, Altaf Hasan and Khan, Sher Afghan and Khalid, Farrukh and Azami, Muhammad Hanafi (2024) Development and assessment of a thermochemical cycle and SOFC-based hydrogen energy systems as a potential energy solution for the peak demand in a sustainable community. International Journal of Hydrogen Energy, 51 (Part D). pp. 1382-1389. ISSN 0360-3199

Tengku Mohmed Noor Izam, Tengku Fadhlin and Farhan Haron, Nuryazmeen and Mohd Ali, Siti Nurhayati and Romali, Noor Suraya and Ibrahim, Saerahany Legori (2024) Idealised estuary salinity-morphology effect characterisation investigation. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (1). pp. 93-103. ISSN 2462-1943

Tripathi, Abhishek Kumar and Mangalpady, Aruna and Elumalai, P.V. and Karthik, Krishnasamy and Khan, Sher Afghan and Asif, Mohammad and Rao, Koppula Srinivas (2024) Advancing solar PV panel power prediction: A comparative machine learning approach in fluctuating environmental conditions. Case Studies in Thermal Engineering, 59. pp. 1-15. ISSN 2214-157X

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343

W Aris, Wan Muhammad Syaamil and Abdul Rahim, Nadirah and M. Mansor, Mahayaudin and Abdul Rahman, Nur Shazana (2024) Operational cost models for an earth station system using 2-parallel and 4-parallel configurations. IIUM Engineering Journal, 25 (2). pp. 232-245. ISSN 1511-788X E-ISSN 2289-7860

Wan Mohd Sukri, Wan Nur Asiah and Othman, Raihan and Sarifuddin, Norshahida (2024) An easy-to-fabricate, submerged Carbon-based air cathode for biofuel cells. IIUM Engineering Journal, 25 (2). pp. 46-56. ISSN 1511-758X E-ISSN 2289-7860

Wang, Jing and Saleem, Nasir and Gunawan, Teddy Surya (2024) Towards efficient recurrent architectures: a deep LSTM neural network applied to speech enhancement and recognition. Cognitive Computation, 16 (3). pp. 1221-1236. ISSN 1866-9956 E-ISSN 1866-9964

Warimani, Mahammadsalman and Bellary, Sayed Ahmed Imran and Azami, Muhammad Hanafi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Veerasigamani, Manieniyan (2024) Effect of multi-cycle combustion on nox emission formation of hydrogen fuel in pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (1). pp. 217-233. ISSN 2289-7879

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Yaknesh, Sambath and Rajamurugu, Natarajan and Babu, Prakash K. and Subramaniyan, Saravanakumar and Khan, Sher Afghan and Saleel, C. Ahamed and Nur‑E‑Alam, Mohammad and Soudagar, Manzoore Elahi Mohammad (2024) A technical perspective on integrating artificial intelligence to solid‑state welding. International Journal of Advanced Manufacturing Technology, 132 (9-10). pp. 4223-4248. ISSN 0268-3768 E-ISSN 1433-3015

Yang, Chuan Choong and Noh, Adriana and Ibrahim, Siti Noorjannah and Asnawi, Ani Liza and Mohamed Azmin, Nor Fadhillah (2024) Teleworking monitoring system using NILM and K-NN algorithms: a strategy for sustainable smart cities. International Journal on Integration of Knowledge, 1 (2). pp. 48-58. E-ISSN 2990-9392

Yusof Zaki, Muhammad Rasyadi and Abdul Hamid, Syamsul Bahrin (2024) A novel approach of non-destructive testing for W-beam guardrail defect detection using surface wave technology. JOURNAL OF CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY, 15 (1). pp. 69-77. E-ISSN 2462-1382

Zainal, Nur Aishah and Asnawi, Ani Liza and Jusoh, Ahmad Zamani and Ibrahim, Siti Noorjannah and Mohd. Ramli, Huda Adibah (2024) Integration of MFCCS and CNN for multi-class stress speech classification on unscripted dataset. IIUM Egineering Journal, 25 (2). pp. 381-395. ISSN 1511-788X E-ISSN 2289-7860

Zainuddin, Nor'Izzah and Mohd Zaini Makhtar, Muaz and Nagoor Gunny, Ahmad Anas and Subash Chandra Bose, Gopinath and Ahmad, Abdul Aziz and Pusphanathan, Kavita and Siddiqui, Masoom Raza and Alam, Mahboob and Mohd, Rafatullah (2024) Isolation, screening and optimization of alkaliphilic cellulolytic fungi for production of cellulase. Green Processing and Synthesis, 13 (1). pp. 1-16. ISSN 2191-9550

Zamani, Abu Sarwar and Hassan Abdalla Hashim, Aisha and Gopi, Arepalli and Moholkar, Kavita and Rizwanullah, Mohammed and Altaee, Rasool (2024) Deep convolutional neural network to predict ground water level. Spatial Information Research, 32 (2). pp. 1-9. ISSN 2366-3286 E-ISSN 2366-3294

Zamani, Abu Sarwar and Hassan Abdalla Hashim, Aisha and Shatat, Abdallah Saleh Ali and Akhtar, Md. Mobin and Rizwanullah, Mohammed and Mohamed, Sara Saadeldeen Ibrahim (2024) Implementation of machine learning techniques with big data and IoT to create effective prediction models for health informatics. Biomedical Signal Processing and Control, 94. pp. 1-5. ISSN 1746-8094 E-ISSN 1746-8108

Zamanuri, Nurul Arbaatun Adawiah and Badron, Khairayu and Ismail, Ahmad Fadzil and Islam, Md. Rafiqul and Yahya, Mohammad Akmal and Othman, Siti Aminah (2024) Site diversity mitigation technique for satellite services for ku and ka-band in tropical region. Journal of Electrical Systems, 20 (4s). pp. 1763-1770. ISSN 1112-5209

Zulkifli, Muhammad Hafiz Zulhilmi and Jasni, Farahiyah and Ghazali, Aimi Shazwani and Nordin, Nor Hidayati Diyana and Sidek, Shahrul Na'im and Shaharum, Syamimi Mardiah and Kamaru Zaman, Fadhlan Hafizhelmi (2024) Exploring the efficacy of Piezoelectric-based sensory systems for heart rate monitoring in differentiating stress vs. relax conditions. IIUM Engineering Journal, 25 (2). pp. 325-337. ISSN 1511-788X E-ISSN 2289-7860

Book

Zakariya, Khalilah and Nizarudin, Norhanis Diyana and Md Jani, Haza Hanurhaza and Tukiman, Izawati and Ab Sani, Jasasikin and Bahrudin, Fadzli Irwan and Sidek, Khairul Azami and Ruslan, Norbaiduri (2024) Ruang sejahtera PPR Gombak Setia, Kuala Lumpur: cultivating topophilia through placemaking and community-oriented public space design. Kulliyyah of Architecture and Environmental Design (KAED), IIUM, Kuala Lumpur, Malaysia.

Book Chapter

Ahmed, Zeinab E and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A and Saeed, Mamoon M A (2024) AI-enhanced education: bridging educational disparities. In: AI-Enhanced Teaching Methods. IGI Global, Hershey, Pennsylvania, USA, pp. 88-107. ISBN 979-8-3693-2728-9

Ahmed, Zeinab E and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A. and Saeed, Mamoon M (2024) Monitoring of wildlife using unmanned aerial vehicle (UAV) with machine learning. In: Applications of Machine Learning in UAV Networks. IGI Global, Hershey, Pennsylvania, USA, pp. 97-120. ISBN 979-8-3693-0578-2

Saeed, Rashid A and Saeed, Mamoon M and Ahmed, Zeinab E and Hassan Abdalla Hashim, Aisha (2024) Enhancing medical services through machine learning and UAV technology: applications and benefits. In: Applications of Machine Learning in UAV Networks. IGI Global, Hershey, Pennsylvania, USA, pp. 307-343. ISBN 979-8-3693-0578-2

Zainuddin, Ahmad Anwar and Mohd Nor, Rizal and Amir Hussin, Amir 'Aatieff and Mohd Sazali, Muhammad Nurzikry and Mohd Razali, Muhammad Irfan Zaki and Khalid, Muhammad Nor Syahmi and Fazail, Muhammad Nazmi and Norazman, Nik Muhammad Faris Firdaus (2024) IoT-powered protection: the smart door access system. In: APS Proceedings. Academica Press Solution, Kelantan, Malaysia, pp. 183-190.

Proceeding Paper

Ab Aziz, Siti Hajar and Mohd Nor, Norhanis Aida and Ghassemlooy, Zabih and Zvanovec, Stanislav and Bohata, Jan (2024) Investigation of hardware equalizer based on a bridged-T network for high-speed VLC. In: 2024 14th International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP), 17-19 July 2024, Rome, Italy.

Abdullah, H S and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2024) Enhanced mobile app security for healthcare applications. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Abdullah Azahari, Abdul Aziz and Mohamad Hanif, Noor Hazrin Hany and Mohamed, Martina Muhaizira (2024) Analysing ratio-based controllers against motivational game theory in peer-to-peer renewable energy trading. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kuala Lumpur, Malaysia.

Ahmad Fauzi, Ahmad Bashir and Mohd Ibrahim, Azhar and Khan, Mazbahur Rahman and Mardzuki, Muhammad Imran (2024) Modelling potential vegetation index for paddy field mapping in Malaysia using satellite imagery. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), Kulliyyah of Engineering, IIUM.

Ahmarofi, Ahmad Afif and Nagoor Gunny, Ahmad Anas and Ahmad Azani, Nur Ainba Nadira and Ab Jalil, Mohd Faizal and Ahmad, Abdul Aziz and Idrus, Zanariah and Ismail, Siti Nurbaya and Hamid, Suhardi and Ishak, Mohamad Khairi (2024) The development of a discrete event simulation (DES) model for evaluating the mechanized equipment in the Malaysia palm oil industry. In: 2022 International Symposium on Advanced Materials and Processing, ISAMP 2022, 20 July 2022, Virtual, Online.

Ahmed, Mayada A and Saeed, Rashid A and Saeed, Mamoon M and Khalifa, Othman Omran (2024) Real-time in-pipe drinking water quality monitoring system design and implementation. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Ahmed, Zeinab E and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A and Saeed, Mamoon M (2024) Deterministic Networking (DetNet): architecture, protocols, and advanced applications. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Ahmed, Zeinab E and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A and Saeed, Mamoon M (2024) Enhancing smart city mobility using Software Defined Networks. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Ahmed, Zeinab E. and Hassan Abdalla Hashim, Aisha and Saeed, Rashid A. and Elbasheir, Mohammed S. (2024) Routing optimization in the internet of vehicle: a systematic review. In: 2024 IEEE 4th International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 19th - 21st May 2024, Tripoli, Libya.

Akhmedov, Abdulkasim and Salleh, Mohd Zuki and Rakhimov, Abdumalik (2024) The approximation of the solution of heat conduction problem in circular plate with concentrated initial heat. In: 3RD INTERNATIONAL CONFERENCE ON APPLIED & INDUSTRIAL MATHEMATICS AND STATISTICS 2022 (ICoAIMS2022), 24-26 August 2022, Pahang.

Ali, Elmustafa Sayed and Saeed, Rashid A and Eltahir, Ibrahim Khider and Khalifa, Othman Omran (2024) A stable energy balancing based clustering routing protocol for IoUT using meta-heuristic technique. In: 4th International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA 2024), 19th - 21st May 2024, Tripoli, Libya.

Ali, Elmustafa Sayed and Saeed, Rashid A and Eltahir, Ibrahim Khider and Khalifa, Othman Omran and Elbasheir, Mohammed S and Saeed, Mammon M. (2024) Hybrid optimization of developed DEEC protocol for enhanced energy efficiency in IoUT. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Arbi Shukhair, Nur Liyana Ameera and Mansor, Hasmah and Gunawan, Teddy Surya and Abdul Kadir, Kushsairy (2024) Enhancing public transportation detection using YOLOv5. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Aryo Putro Satriyono, Raden Danang and Pebrianti, Dwi and Asmara Sakti, Arga Seta (2024) Micro small medium enterprises intention to implement circular economy in Solo, Indonesia. In: The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023), 7-8 December 2023, Surakarta, Indonesia.

Ashraf, Arselan and Sophian, Ali and Shafie, Amir Akramin and Gunawan, Teddy Surya and Ismail, Norfarah Nadia and Bawono, Ali Aryo (2024) RCD-IIUM: a comprehensive Malaysian road crack dataset for infrastructure analysis. In: 9th International Conference on Mechatronics Engineering, 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Babikir, Mohamed Hassan and Hamid, Khalid and Abdu, Ghada AM and Elsayed, Imadeldin and Saeed, Rashid A and Khalifa, Othman Omran (2024) Optimization efficiency of 5G MIMO cooperative spectrum sharing NOMA networks. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Che Ahmad, Aminudin and Al-Azmi, Abdul Rahman and Ahmad, Zuraida and Samat, Noorasikin and Sarifuddin, Norshahida and Awang, Mohd Shukrimi (2024) Comparative study of kaolin and bentonite clay as potential materials for halal sertu in healthcare applications. In: International Halal Congress 2024, 17th - 19th May 2024, Ankara, Turkey.

Chebil, Jalel and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2024) An innovative approach for estimating the number of tags in RFID traffic monitoring systems. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Elmadina, Nahla Nur and Saeed, Rashid A and Saeid, Elsadig and Ali, Elmustafa Sayed and Nafea, Ibtehal and Ahmed, Mayada A and Mokhtar, Rania A and Khalifa, Othman Omran (2024) Double Deep RL-based strategy for UAV-assisted energy harvesting optimization in disaster-resilient IoT networks. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Eltahir, E.I. and Elsheikh, Elfatih A. A. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Hassan Abdalla Hashim, Aisha and Hamdan, Mosab (2024) Effects of meteorological parameters on microwave propagation modeling during dust storm. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, IIUM, Gombsk.

Eltayeb, Muhammad Alfatih and Azmi, Nur Liyana and Md Nor, Khairul Affendy and Toha @ Tohara, Siti Fauziah and Hassan Abdalla Hashim, Aisha and Nordin, Nor Hidayati Diyana (2024) Investigating the effects of backrest angle on driver erector spinae muscle fatigue during long drives: a preliminary study. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Habaebi, Mohamed Hadi and Zulkarnain, Muhammad Amin and Gunawan, Teddy Surya and Fitriawan, Helmy and Kartiwi, Mira and Abd Rahman, Faridah (2024) Development of skin cancer detection using deep spiking neural networks. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 30-31 July 2024, BANDUNG, INDONESIA.

Hadj Sahraoui, Sami and Mohd Ibrahim, Azhar and Saeed Baqalaql, Odai and Al Mahmud, Suaib (2024) Modeling and simulation of human behaviors during vertical emergency evacuation via intelligent fuzzy agents. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Huzaini, Muhammad Irfan Darwish and Mansor, Hasmah and Gunawan, Teddy Surya and Ahmad, Izanoordina (2024) Development of an accurate AI-based dermatology assistant for skin disease recognition using YOLOv8 models. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 30-31 July 2024, Bandung, Indonesia.

Khalifa, Othman Omran and Ahmed, Muhammed Zaharadeen and Hassan Abdalla Hashim, Aisha (2024) Application of Simon encryption algorithm for data transmission between sensor nodes in IoT environment. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Mohd Noor, Muhammad Syarul Nizwa and Mohamad, Sarah Yasmin and Abdul Malek, Norun Farihah and Mohd. Isa, Farah Nadia and Rahimi, Aiman Hakimi and Mohd. Ramli, Huda Adibah (2024) A dual-band slotted antenna at 2.4/5.8GHz for ISM band applications. In: 2024 IEEE Symposium on Wireless Technology & Applications (ISWTA), 20-21 July 2024, Kuala Lumpur, Malaysia.

Mohd Taam, Ahmad Zun Najhi and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2024) Living plant energy harvesting for WSN & IoT devices. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kuala Lumpur, Malaysia.

Mokhzani Aris, Nur Amirah and Khalifa, Othman Omran (2024) Mobile-enabled traffic monitoring with alert system for a better drive. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Motakabber, S. M. A. and Abdullah, Khaizuran and Islam, Gazi Zahirul and Izuddin, Zikrulhakim (2024) Design and development of smart thermoelectric system for small-scale cooling applications. In: 9th International Conference on Mechatronics Engineering (ICOM'24), 13-14 August 2024, Kuala Lumpur, Malaysia.

Mustafa, Yousra A and Ali, Elmustafa S and Osman, Thana E and Khalifa, Othman Omran and Mohamed, Zainb O and Saeed, Rashid A and Saeed, Mamoon M (2024) Multi-drones energy efficient based path planning optimization using Genetic Algorithm and Gradient Decent approach. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Mutholib, Abdul and Abdul Rahim, Nadirah and Gunawan, Teddy Surya and Ahmarofi, Ahmad Afif (2024) Performance comparison of data preprocessing methods for trade-space exploration with AI model: case study of satellite anomalies detection. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications ( ICSIMA), 30-31 July 2024, Bandung, Indonesia.

Norazni, N S A and Kamaruddin, N H M and Yunus, K N M and Poharan, A and Wan Azahar, Wan Nur Aifa (2024) Chemical characterization of asphalt binder containing palm oil mill sludge. In: 7th International Conference on Civil Engineering and Environmental Engineering for Sustainability, 9-10 August 2023, Impiana KLCC Hotel, Kuala Lumpur.

Rahimi, Aiman Hakimi and Mohamad, Sarah Yasmin and Abdul Malek, Norun Farihah and Islam, Md Rafiqul and Midi, Nur Shahida and Shuhaimi, Nurain Izzati (2024) A flexible wideband microstrip antenna on TPU substrate using inset slot feed and partial ground plane. In: Symposium on Wireless Technology & Applications (ISWTA) 2024, 20th - 21st July 2024, Kuala Lumpur, Malaysia.

Rosli, Anis Najwa and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2024) Using model predictive control in renewable energy sources. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Saeed, Mamoon M and Saeed, Rashid A and Ali, Elmustafa Sayed and Mokhtar, Rania A and Khalifa, Othman Omran (2024) Algorithm for resource allocation and computing offloading in 6G networks: deep reinforcement learning-based. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Sediono, Wahju and Azhar, Mu'adz Azri and Susilawati, Helfy (2024) A speed detection system utilizing lower frequency noise. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kuala Lumpur.

Tasdelen, Abdulkadir and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul (2024) Exploring blockchain technologies: insights into consensus mechanisms, mining pool dynamics, and energy consumption patterns. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), August 13-14, 2024, Kulliyyah of Engineering, IIUM.

Wan Jusoh, Wan Ahmad Izuddin and Mohd Razib, Mohd Asyraf and Md Nor, Khairul Affendy and Zainal Abidin, Zulkifli (2024) Design and optimization of motion control for autonomous scrubber robot. In: 9ᵗʰ INTERNATIONAL CONFERENCE ON MECHATRONICS ENGINEERING (ICOM’24), 13-14 August 2024, Gombak.

Wan Zainal, Wan Nur Aina and Ayob, Nur Idayu and Rozhan, Alya Naili and Talip Yusof, Nurhafizah Abu and Zulkifli, Zurita (2024) Preparation and characterization of graphene film using biogas derived from oil palm empty fruit bunch (OPEFB) by chemical vapor deposition (CVD) method. In: 10th Conference on Emerging Energy and Process Technology, CONCEPT 2023, in conjunction with 3rd International Conference on Renewable Energy, I-CORE 2023, 1-2 November 2023, Hybrid, Malang.

Yassin, Alaa A. and Saeed, Rashid A. and Yousif, Ebtihal H. G. and Khalifa, Othman Omran (2024) Performance analysis of physical-layer network coding for IIoT applications. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Yusri, Muhammad Iqbal and Habaebi, Mohamed Hadi and Gunawan, Teddy Surya and Mansor, Hasmah and Kartiwi, Mira and Nur, Levy Olivia (2024) Impact of dataset balancing on machine learning-based intrusion detection systems. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 30-31 July 2024, BANDUNG, INDONESIA.

Zainal Abidin, Muhammad Harith and Kamaruddin, Shafie and Adam Malek, Afiqah and Sukindar, Nor Aiman (2024) Application of the Bees Algorithm to find optimal drill path sequence. In: 5th International Symposium on Intelligent Manufacturing and Mechatronics (SIMM 2023), 12th July 2023, Virtual Conference.

Zakaria, Mohd Sharif and Abas, Mohammad Fadhil and Dg Jamil, Fatimah and Mohd Saad, Norhafidzah and Hashim, Addie Irawan and Pebrianti, Dwi (2024) Detecting problematic vibration on unmanned aerial vehicles via genetic-algorithm methods. In: 20th International Colloquium on Signal Processing & Its Applications (CSPA 2024), 1st - 2nd March 2024, Langkawi, Malaysia.