Items where Division is "Kulliyyah of Engineering" and Year is 2024

A

Abd Razak, Najihah and Azami, Muhammad Hanafi (2024) Investigation on regression rate behavior of polylactic acid manufactured by fused deposition modelling for hybrid rocket motor. Journaal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 157-165. ISSN 1990-7710

Abdul Latif, Samihah and Sidek, Khairul Azami and Abu Bakar, Eddyzulham and Hassan Abdalla Hashim, Aisha (2024) Online multimodal compression using pruning and knowledge distillation for iris recognition. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (2). pp. 68-81. ISSN 2462-1943

Abdull Jalal Khan, Siti Mashitah and Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Saidin, Norazlina (2024) Pencil graphite on paper: facile approach for fabrication of flexible strain sensors. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Akhmedov, Abdulkasim and Salleh, Mohd Zuki and Rakhimov, Abdumalik (2024) The approximation of the solution of heat conduction problem in circular plate with concentrated initial heat. In: 3RD INTERNATIONAL CONFERENCE ON APPLIED & INDUSTRIAL MATHEMATICS AND STATISTICS 2022 (ICoAIMS2022), 24-26 August 2022, Pahang.

Alam, Mohammad Shafiul and Elsheikh, Elfatih A. A. and Suliman, F. M. and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz (2024) Innovative strategies for early autism diagnosis: active learning and domain adaptation optimization. Diagnostics, 14 (6). pp. 2-18. ISSN 2075-4418

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Faizabadi, Ahmed Rimaz and Mohd Zaki, Hasan Firdous (2024) Power of alignment: exploring the effect of face alignment on ASD diagnosis using facial images. IIUM Engineering journal, 25 (1). pp. 317-327. ISSN 1511-788X E-ISSN 2289-7860

Aldaas, Aseel and Alam, Md. Zahangir and Azmi, Azlin Suhaida (2024) Acidic-enzymatic co-treatment of food waste for high sugar recovery and biogas production. Jurnal Teknology, 86 (2). pp. 1-7. ISSN 0127-9696 E-ISSN 2180-3722

Alhamada, Abdulrahman and Khalifa, Othman Omran and Abdul Rahman, Farah Diyana and Mohamad Nasir, Haidawati (2024) Secure key exchange for protecting health data Diffie-Hellman based approach. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Alli, Yakubu Adekunle and Bamisaye, Abayomi and Nancy, Parvathy and Zachariah, Suji Mary and Oladoye, Peter and Bankole, Owolabi Mutolib and Akamo, Damilola O. and Chkirida, Soulaima and Anuar, Hazleen and Thomas, Sabu (2024) MXene composites: properties, synthesis and its emerging application in rechargeable batteries. Journal of Energy Storage, 77. pp. 1-21. ISSN 2352-152X E-ISSN 2352-1538

Amir, Dzilal and Nasaruddin, Ricca Rahman and Yousefi, Maryam and Mastuli, Mohd Sufri and Sulaiman, Sarina and Alam, Md. Zahangir and Engliman, Nurul Sakinah (2024) Investigating the synthesis parameters of durian skin-based activated carbon and the effects of silver nanocatalysts on its recyclability in methylene blue removal. Discover Nano, 19 (32). pp. 1-23. E-ISSN 2731-9229

Arbi Shukhair, Nur Liyana Ameera and Mansor, Hasmah and Gunawan, Teddy Surya and Abdul Kadir, Kushsairy (2024) Enhancing public transportation detection using YOLOv5. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Aryo Putro Satriyono, Raden Danang and Pebrianti, Dwi and Asmara Sakti, Arga Seta (2024) Micro small medium enterprises intention to implement circular economy in Solo, Indonesia. In: The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023), 7-8 December 2023, Surakarta, Indonesia.

Asmaly, Hamza A. and Kabbashi, Nassereldeen Ahmed and Alkhatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Mohd Khairuddin, Nur Farahah (2024) Optimizing 2-nitrophenol and chromium adsorption from water with aluminium oxide via response surface methodology. Knowledge-based Engineering and Sciences, 5 (1). pp. 98-119. ISSN 2788-7820 E-ISSN 2788-7839

Azami, Muhammad Hanafi (2024) Euclid: misi merungkai misteri besar alam semesta. Risalah Falak. p. 14.

B

Baba, Tamana and Husni, Muhammad Hazeeq and Saidin, Norazlina and Hasbullah, Nurul Fadzlin (2024) Effect of proton radiation on gallium nitride light emitting diodes. Bulletin of Electrical Engineering and Informatics, 13 (1). pp. 194-201. ISSN 2089-3191 E-ISSN 2302-9285

Baba, Tamana and Siddiqui, Naseeb Ahmed and Saidin, Norazlina and Md Yusoff, Siti Harwani and Abdul Sani, Siti Fairus and Abdul Karim, Julia and Hasbullah, Nurul Fadzlin (2024) Radiation-induced degradation of silicon carbide MOSFETs – a review. Materials Science & Engineering: B, 300. pp. 1-13. ISSN 0921-5107 E-ISSN 1873-4944

Badran, Marwan Atef and Toha @ Tohara, Siti Fauziah (2024) Employment of artificial intelligence (AI) techniques in battery management system (BMS) for electric vehicles (EV): issues and challenges. Pertanika Journal Science and Technology, 32 (2). pp. 859-881. ISSN 0128-7680 E-ISSN 2231-8526

Baghdadi, Faical and Hrairi, Meftah and Asrar, Waqar (2024) A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6). pp. 157-168. E-ISSN 2180 - 1363

Bahamid, Alala and Mohd Ibrahim, Azhar and Shafie, Amir Akramin (2024) Crowd evacuation with human-level intelligence via neuro-symbolic approach. Advanced Engineering Informatics, 60. pp. 1-17. ISSN 1474-0346

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Bin Idrus, Mohammad Ariff Zakwan and Abdul Rahman, Farah Diyana and Khalifa, Othman Omran and Md Yusoff, Nelidya (2024) Blockchain-based security for cloud data storage. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

E

Elgharbawy, Amal A.M. and Khan, Huma Warsi and Mohd Noor, Najihah and Syed Putra, Sharifah Shahira and Engku Ismail, Engku Normi and Hizaddin, Hanee Farzana and Hayyan, Maan and Hayyan, Adeeb and Basirun, Wan Jefrey and Moniruzzaman, Muhammad and Al-afandi, Lama and Abdullah Sani, Muhamad Shirwan (2024) Antibacterial performance enhancement using hydrophobic deep eutectic solvents: COSMO-RS prediction, experimental validation, and synergistic action with antibiotics. Journal of Molecular Liquids, 396. pp. 1-14. ISSN 0167-7322 E-ISSN 1873-3166

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

Esa, Noor Yusriah and Wan Azahar, Wan Nur Aifa and Kasim, Norhidayu and Basri, Nur Khairiyah (2024) Comparison of the mechanical performance of dense grading and porous grading mixture utilized with crumb rubber modified binder. IIUM Engineering Journal, 25 (1). pp. 128-141. ISSN 1511-788X E-ISSN 2289-7860

F

Fayaz, Hussain and Ramesh, S. and Afzal, Asif and Agbulut, Ümit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. pp. 1-15. E-ISSN 2451-9049

G

Gunawan, Teddy Surya and Kartiwi, Mira and Saifudin, Ali and Nur, Levy Olivia and Nugroho, Bambang Setia (2024) Optimizing livestock productivity with computer vision-based cow estrus detection in free stall barns using various YOLOv8 models. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Gunawan, Teddy Surya and Mansor, Hasmah and Kartiwi, Mira and Md Yusoff, Nelidya (2024) Palm fruit ripeness detection and classification using various YOLOv8 models. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

H

Haddad, Alaa and Habaebi, Mohamed Hadi and Elsheikh, Elfatih A A and Islam, Md Rafiqul and Ahmad Zabidi, Suriza and M Suliman, Fakher Eldin (2024) E2EE enhanced patient-centric blockchain-based system for EHR management. PLoS ONE, 19 (4). pp. 1-21. ISSN 1932-6203

Haniman, Adilan and Elgharbawy, Amal A.M. and Hayyan, Adeeb and Wae-Hayee, Makatar and Mohd Noor, Nurul Auni and Jawahar, Bassam Mohamed and Hussain, Mahmud and Dewi, Ika Atsari (2024) Clean extraction of pectin from dragon fruit peels, pomelo peels, okra, and pineapple peels using deep eutectic solvents and ionic liquids. HALALSPHERE, 4 (1). pp. 23-33. E-ISSN 2773-6040

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar (2024) Numerical prediction of trailing edge noise at low Reynolds number with modified trailing edges of a NACA 0015 airfoil. CFD Letters, 16 (8). pp. 64-94. ISSN 2180-1363 E-ISSN 2180-1363

Hassan, Mohamed Ibren and Asrar, Waqar and Ismail, Muhammad Ariffuddin and Andan, Amelda Dianne (2024) Experimental investigation on the aerodynamic parameters of trailing edge wake generators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 1-16. ISSN 2289-7879

Hossain, Fahmida and Hossain, A. K. M. Zakir and Ibrahimy, Muhammad Ibn and Jamil Alsayaydeh, Jamil Abedalrahim (2024) Design and performance evaluation of a 6×6 MIMO array with partial ground plane for sub-6 GHz mobile applications. International Journal of Intelligent Engineering and Systems, 17 (1). pp. 612-623. ISSN 2185-310X E-ISSN 2185-3118

J

Jafri, Nur Huda Syazwani and Asri, Arif and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2024) PVA-PEG hydrogel incorporated with cellulose nanofibril of oil palm empty fruit bunches and antibacterial agent curcumin. Journal of Pharmacy, 4 (1). pp. 116-128. E-ISSN 2773-5664

Jannah, Nurul and Abu Hanifah, Mohd Shahrin and Gunawan, Teddy Surya and Ahmad Zabidi, Suriza and Yusoff, Siti Hajar and Mohd Sapihie, Siti Nadiah (2024) Comparative analysis of MLP and CNN-LSTM models for solar power generation forecasting. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Jilte, Ravindra and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Venkatesan, Elumalai Perumal and Munimathan, Arunkumar (2024) Cooling performance of a Li-ion cylindrical battery pack with liquid circulating pipes embedded in phase change material. Journal of Energy Storage, 87 (111335). pp. 1-15. ISSN 2352-152X

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza and Hasham, Rosnani (2024) Microencapsulation of Acalypha indica Linn. Extracts using chitosan-polycaprolactone blends. Pertanika Journal of Science & Technology, 32 (2). pp. 741-760. ISSN 0128-7680 E-ISSN 2231-8526

K

Kamaruddin, Amirul Faiz and Zahaba, Maryam and Tamsi, Nur Sarah Fatihah and Anua, Mohd Khusainy and Hassan, Noor Artika and Nordin, Nur Sazwi and Ariffin, Arman (2024) A comparative study on indoor air quality (IAQ) between centralised and split unit air conditioning systems in a naval ship. Defence S and T Technical Bulletin, 17 (1). pp. 28-36. ISSN 1985-6571 E-ISSN 3009-1896

Khalaf, Ayesheh Ahrari and Hassan Abdalla Hashim, Aisha and Olowolayemo, Akeem (2024) Mutual character dialogue generation with semi‑supervised multitask learners and awareness. International Journal of Information Technology, 16 (3). pp. 1357-1363. ISSN 2511-2104 E-ISSN 2511-2112

Khan, Ambareen and Khan, Sher Afghan and Raja, Vijayanandh and Aabid, Abdul and Baig, Muneer (2024) Effect of ribs in a suddenly expanded flow at sonic Mach number. Heliyon, 10. pp. 1-17. ISSN 2405-8440

M

Maizal Hairi, Nur Iffah Irdina and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Mohamad Yunos, Muhammad Farhan Affendi and Ming, Lim Lai and Tung, Lun Hao and Samsudin, Zambri (2024) Recent advance in using eco-friendly carbon-based conductive ink for printed strain sensor: a review. Cleaner Materials, 12. pp. 1-19. ISSN 2772-3976

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Malla, Pravanjan and Liu, Chi-Hsien and Wu, Wei-Chi and Nordin, Anis Nurashikin and Rath, Dharitri (2024) Magnetic metal-organic frameworks as sensitive aptasensors for coronavirus spike protein. Analytica Chimica Acta, 1309. pp. 1-10. ISSN 0003-2670 E-ISSN 1873-4324

Mohamad Puad, Noor Illi and Ibrahim, Soumayat Ali and Azmi, Azlin Suhaida and Abduh, Muhammad Yusuf (2024) The influence of plant growth regulators and light supply on bitter cassava callus initiation for starch production. IIUM Engineering Journal, 25 (1). pp. 1-11. ISSN 1511-788X E-ISSN 2289-7860

Mohamad Yusoff, Muhammad Annuar Alhadi and Azmi, Nur Liyana and Nordin, Nor Hidayati Diyana (2024) A wheelchair sitting posture detection system using pressure sensors. IIUM Engineering Journal, 25 (1). pp. 302-316. ISSN 1511-788X E-ISSN 2289-7860

Mohammad Abir, Intiaz and Mohd Ibrahim, Azhar and Toha, Siti Fauziah and Mohd Romlay, Muhammad Rabani (2024) Modelling and simulation of assisted hospital evacuation using fuzzy-reinforcement learning based modelling approach. Neural Computing and Applications. pp. 1-30. ISSN 0941-0643 E-ISSN 1433-3058

Mohd Hamzah, Siti Zainab and Abdul Malek, Norun Farihah and Ahamad, Firdaus Taqiyuddin and Mohamad, Sarah Yasmin and Jamaluddin, Mohd Haizal (2024) Reflection coefficient variation based on the configuration of integrated antenna and reflecting surface at 3.5 GHz. In: 2023 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION, 30 October - 2nd Novermber 2023, Berjaya Times Square Hotel, Kuala Lumpur.

Mohd Nawawi, Muhammad Muizz and Sidek, Khairul Azami and Azman, Amelia Wong (2024) ECG in real world scenario: time variability in biometric using wearable smart textile shirts. Journal of Advanced Research in Applied Sciences and Engineering Technology, 40 (2). pp. 36-49. ISSN 2462-1943

Mohd Tahir, Mohamad Safiddin and Wahid, Azni Nabela and Mohamad Hanif, Noor Hazrin Hany and Janin, Zuriati (2024) Micro energy harvesting via piezoelectric and electromagnetic dynamics for higher power output. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Mohd Yusof, Najiha 'Izzaty and Sophian, Ali and Mohd Zaki, Hasan Firdaus and Bawono, Ali Aryo and Embong, Abd Halim and Ashraf, Arselan (2024) Assessing the performance of YOLOv5, YOLOv6, and YOLOv7 in road defect detection and classification: a comparative study. Bulletin of Electrical Engineering and Informatics, 13 (1). pp. 350-360. ISSN 2089-3191 E-ISSN 2302-9285

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Comprehensive analysis of geometric hole designs and configurations in film cooling for gas turbine engines: a critical review. Journal of Aeronautics, Astronautics and Aviation, 56. pp. 187-218. ISSN 1990-7710

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Numerical investigation of heat transfer enhancement via dimpled target surface configuration and jet arrangement in impingement cooling. Journal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 93-106. ISSN 1990-7710

Mokhtar, Nadiah and A. Aziz, Edriyana and Aris, Azmi and Shukor, Hafiza and Mohd Zaki, Syazwani (2024) Biosorption of anionic and cationic azo dye onto red macro alga: determination of the significant variables using resolution V fractional factorial design. Physics and Chemistry of the Earth, 134. pp. 1-12. ISSN 1474-7065

Motakabber, S. M. A. and Rokon, M. I. R. and Alam, A. H. M. Zahirul and Islam, G. Z. and Matin, M. A. and Mahmud, Md (2024) Advancing system integration: verilog-based hardware implementation of an asic interface for three amba processors. IIUM Engineering Journal, 25 (1). pp. 253-262. ISSN 1511-788X E-ISSN 2289-7860

Muhammad Zamri, Fatin Najihah and Zulkurnain, Nurul Fariza and Gunawan, Teddy Surya and Kartiwi, Mira and Md Yusoff, Nelidya and Nur, Levy Olivia (2024) Real-time safety helmet detection using enhanced YOLOv5 object detection. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023), 17th - 18th October 2023, Kuala Lumpur, Malaysia.

Murugaya, Kartigesan and Misdan, Nurasyikin and Awang, Nuha and Ling, How Hua and Madon, Rais Hanizam and Hairom, Nur Hanis Hayati and Razali, Nor Faizah and Yusof, Norhaniza and Jaafar, Juhana and Md Nordin, Nik Abdul Hadi and Ali, Fathilah (2024) Preparation and characterizations of triptycene integrated poly (arylene ether sulfone) based block and random copolymers. International Journal of Engineering Trends and Technology, 72 (2). pp. 133-141. ISSN 2231–5381

N

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

Nedjai, Radhia and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Al-Khatib, Ma'an Fahmi Rashid and Tahreen, Amina and Mamun, Abdullah Al (2024) Adsorption performance of fixed-bed columns for the removal of phenol using baobab fruit shell based activated carbon. IIUM Engineering Journal, 25 (1). pp. 59-71. ISSN 1511-788X E-ISSN 2289-7860

P

Pan, Chunlan and Alqahtani, Aisha M. and Wei, Haoran and Sulaiman, Nadzril and Elsiddieg, Awatif M.A. and Ghoushchi, S.P. (2024) Heat transfer enhancement of a heat exchanger using novel multiple perforated magnetic turbulators (MPMT): an experimental study. International Journal of Thermal Sciences, 195 (1). pp. 1-9. ISSN 1290-0729 E-ISSN 1778-4166

Pebrianti, Dwi and Ahmad, Denis and Bayuaji, Luhur and Wijayanti, Linda and Mulyadi, Melisa (2024) Using content-based filtering and apriori for recommendation systems in a smart shopping system. Indonesian Journal of Computing, Engineering and Design, 6 (1). pp. 58-70. ISSN 2656-1972 E-ISSN 2656-8179

Pebrianti, Dwi and Kurniawan, Haris and Bayuaji, Luhur and Rusdah, Rusdah (2024) XgBoost hyper-parameter tuning using Particle Swarm Optimization for stock price forecasting. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 9 (4). pp. 1179-1195. ISSN 2338-3070 E-ISSN 2338-3062

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue and methyl orange dye by using the core-shell structure of Fe3O4@ZnS nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 42-55. ISSN 2756-8210

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue dye by using different nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 1-17. ISSN 2756-8210

Pratama, Maulana Krisna Bayu and Dewi, Yulia Puspita and Kusumawati, Tri Ika Jaya and Pebrianti, Dwi (2024) Designing a laboratory assistant attendance system using Radio Frequency Identification (RFID) technology based on IOT. Jurnal Inovasi danTeknologi Pembelajaran, 11 (1). pp. 43-54. ISSN 2406-8780 E-ISSN 2654-7953

Q

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

R

Rashid, Muhammad Mahbubur and Abd Razak, Mohamad Farhan and Hasan, Tahsin Fuad (2024) Analysis of impedance based sensor to discover the invasive nature of A549 lung cancer cell. Journal of Advanced Research in Applied Sciences and Engineering Technology, 41 (2). pp. 238-255. ISSN 2462-1943

Ridwan, Ridwan and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2024) Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 32-49. E-ISSN 2289-7879

Rosli, Anis Najwa and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2024) Using model predictive control in renewable energy sources. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Rossiter, John Anthony and Abdullah, Muhammad and Aftab, Muhammad Saleheen (2024) Improving the feedforward component for recent variants of predictive functional control. Processes, 12 (1). pp. 1-15. E-ISSN 2227-9717

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

Ruslan, Ahmad Alhadi and Yusoff, Siti Hajar and Mohamad, Sarah Yasmin and Ibrahim, Siti Noorjannah and Abdul Malek, Norun Farihah and Abd Rahman, Faridah (2024) Performance comparison of a flexible circular microstrip patch antenna on various rubber-carbon compositions. In: 2023 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION, 30 October - 2nd Novermber 2023, Kuala Lumpur.

S

Saadeldin, Abuelgasim and Rashid, Muhammad Mahbubur and Shafie, Amir Akramin and Hasan, Tahsin Fuad (2024) Real-time vehicle counting using custom YOLOv8n and DeepSORT for resource-limited edge devices. Telkomnika (Telecommunication Computing Electronics and Control), 22 (1). pp. 1-9. ISSN 1693-6930 E-ISSN 2087-278X

Saleem, Nasir and Gunawan, Teddy Surya and Dhahbi, Sami and Bourouis, Sami (2024) Time domain speech enhancement with CNN and time-attention transformer. Digital Signal Processing, 147. pp. 1-12. ISSN 1051-2004 E-ISSN 1095-4333

Satriawan, Sukma and Setiawan, Agus and Pebrianti, Dwi and Md. Zain, Zainah (2024) The effect of pin length and compressive force in double side friction stir welding on bending strength of AA1100. Journal of Evrimata: Mechanical Engineering, 1 (1). pp. 9-13. E-ISSN XXXX-XXXX

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2024) Influence of sweep angle on the surface pressure of delta wing along pivot positions at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 172-191. ISSN 2289-7879

Sohu, Samiullah and Md Kassim, Tahara Ramadzan and Shahid Khan, Omar (2024) Critical risk factors influencing time schedule of residential projects in Pakistan. Engineering, Technology & Applied Science Research, 14 (1). pp. 12636-12639. ISSN 2241-4487 E-ISSN 1792-8036

Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Azhar, Muhammad Danial and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Sulaiman, Mohd Hafis and Haji Ahmad Sabli, Ahmad Syamaizar and Mohd Ariffin, Mohd Khairol Anuar (2024) Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum. Heliyon, 10 (4). pp. 1-13. ISSN 2405-8440

V

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343 (In Press)

W

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Z

Zainal Abidin, Siti Aisyah and Yusoff, Siti Hajar and Mansor, Hasmah and Mohd Sapihie, Siti Nadiah and Muhamad Fahmi, Muhammad Aqil Muqri (2024) Scheduling of the battery for peak shaving using Model Predictive Control (MPC). In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.

Zainuddin, Ahmad Anwar and Mohd Nor, Rizal and Amir Hussin, Amir 'Aatieff and Mohd Sazali, Muhammad Nurzikry (2024) MQTT-enabled smart door access system: design and implementation using NodeMCU ESP 8266 and HiveMQ. In: 9th International Conference on Computing, Engineering and Design (ICCED 2023), 7th - 8th November 2023, Kuala Lumpur, Malaysia.