Items where Division is "Kulliyyah of Engineering" and Year is 2017

Article

., Md Nuruzzaman and Al Mamun, Abdullah and Salleh, Md Noor (2017) A brief account of river rehabilitation experiences. IIUM Engineering Journal, 18 (1). pp. 27-41. ISSN 1511-788X E-ISSN 2289-7860

., Sitti Nurmiah and Syarief, Rizal and Sukarno, Nampiah and Peranginangin, Rosmawaty and Nurtama, Budi and Jaswir, Irwandi (2017) Production of refined carrageenan from Kappaphycus alvarezii on pilot plant scale: optimization of water extraction using Response Surface Methodology. International Food Research Journal (IFRJ), 24 (Suppl.). S522-S528. E-ISSN 2231-7546

AL-ASKARIa, Shadi and Hamida, Belal Ahmed and Khan, Sheroz and Yasin, Moh and Harun, Sulaiman Wadi and Jusoh, Zulzilawati (2017) An adiabatic silica taper based on two sequential tapering routines. Journal of Optoelectronics and Advanced Materials, 19 (9-10). pp. 567-574. ISSN 1454-4164

Ab Mutalib, Nurul Asyikeen and Jaswir, Irwandi and Akmeliawati, Rini and Ibrahim, A. M. and Aslam, Mohd. and Octavianti, Fitri (2017) Rapid detection of ethanol in beverages using IIUM-fabricated electronic nose. International Food Research Journal (IFRJ), 24 (Suppl.). S529-S532. E-ISSN 223-17546

Abas, Norzaida and M. R., Siti Musliha and M. D., Zalina and Abdul Halim, Syafrina (2017) Probability distributions comparative analysis in assessing rainfall process in time and space. International Journal of Civil Engineering and Technology, 8 (10). pp. 1679-1688. ISSN 0976-6308 E-ISSN 0976-6316

Abdelrahman, Maha A. A and Yassin, Atif A. A. and Hussein, Ismail Hassan and Mirghani, Mohamed Elwathig Saeed and Karama, Abdallah (2017) Production of biodiesel form Jatropha curcas seed oil. Gezira Journal of Engineering & applied Sciences, 12 (1). pp. 59-67. ISSN 1858-5698

Abdul Hamid, Syamsul Bahrin and Shaharom, Rabiatul Adawiyah (2017) Monitoring system using handwritten sample pressure point. International Journal of Mechanical and Production Engineering (IJMPE), 5 (2). pp. 103-108. ISSN 2320-2092 E-ISSN 2321-2071

Abdul Malek, Norun and Mohd. Ramly, Athirah and Abdullah Sidek, 'Atiah and Mohamad, Sarah Yasmin (2017) Characterization of acrylonitrile butadiene styrene for 3D printed patch antenna. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 116-123. ISSN 2502-4760

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Taylor, Zeike A. and Tafazzolimoghaddam, Behrooz and Martinez Vicente, J.L. and Zhang, Chao (2017) Transversal crack and delamination of laminates using XFEM. Composite Structures, 173. pp. 78-85. ISSN 0263-8223

Abdullah Amqizal, Hassan Ibrahem and Al-Kahtani, Hassan Abdullah M. and Ismail, Elsayed Ali and Hayat, Khizar and Jaswir, Irwandi (2017) Identification and verification of porcine DNA in commercial gelatin and gelatin containing processed foods. Food Control, 78. pp. 297-303. E-ISSN 0956-7135

Adinurani, Praptiningsih G. and Setyobudi, Roy Hendroko and Wahono, Satriyo Krido and Mel, Maizirwan and Nindita, Anggi and Purbajanti, Endang Dwi and Harsono, Soni Sisbudi and Malala, Andoniana Rakoto and Nelwan, Leopold O. and Sasmito, Andi (2017) Ballast weight review of capsule husk Jatropha curcas Linn. on acid fermentation first stage in two phase anaerobic digestion. Proceedings of the Pakistan Academy of Sciences, 54 (1B). pp. 47-57. ISSN 0377-2969

Ahmad, Kartini and Hanouf, Zahir and Ishak, Anuar (2017) MHD casson nanofluid flow past a wedge with newtonian heating. European Physical Journal Plus, 132 (2). ISSN 2190-5444

Ahmad, Kartini and Wahid, Zaharah and Hanouf, Zahir (2017) Stagnation point flow of Casson fluid over exponentially stretching sheet with variable thermal conductivity and Newtonian heating. International Journal of Advances in Mechanical and Civil Engineering, 4 (2). pp. 56-59. ISSN 2394-2827

Ahmad, Zuraida and Tajuddin, Maisarah and Wan Mohd Yusof, Wan-Shazlin Maisarah (2017) Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science, 29 (4). pp. 485-492. ISSN 0128-1283

Ahmad Fauzi, Dhiyauddin and Alang Rashid, Nahrul Khair and Mohamed Zin, Muhammad Rawi and Hasbullah, Nurul Fadzlin (2017) Radiation performance of Gan and InAs/GaAs quantum dot based devices subjected to neutron radiation. IIUM Engineering Journal, 18 (1). pp. 101-109. ISSN 1511-788X E-ISSN 2289-7860

Ahmed, Hamdi E. and Yusoff, M.Z. and Hawlader, Mohammad Nurul Alam and Ahmed, Mirghani Ishaq and Salman, B. H. and Kerbeet, A. Sh (2017) Turbulent heat transfer and nanofluid flow in a triangular duct with vortex generators. International Journal of Heat and Mass Transfer, 105. pp. 495-504. ISSN 0017-9310

Aibinu, Abiodun Musa and Onumanyi, Adeiza J. and Adedigba, A. P. and Ipinyomi, M. and Folorunso, T. A. and Salami, Momoh Jimoh Eyiomika (2017) Development of hybrid artificial intelligent based handover decision algorithm. Engineering Science and Technology, an International Journal, 20 (2). pp. 381-390. E-ISSN 2215-0986

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2017) Quasi-inverse pendulum model of 12 DoF bipedal walking. International Journal of Automation and Computing, 14 (2). pp. 179-190. ISSN 1476-8186

Al-Kahtani, Hassan Abdullah M. and Jaswir, Irwandi and Ismail, Elsayed Ali and Ahmed, Mohammed Asif and Hammed, Ademola Monsur and Olorunnisola, Saeed and Octavianti, Fitri (2017) Structural characteristics of camel-bone gelatin by demineralization and extraction. International Journal of Food Properties, 20 (11). pp. 2559-2568. ISSN 1094-2912

Al-Qudah,, Dua’A Mahmoud and Olanrewaju, Rashidah Funke and Azman, Amelia Wong (2017) Intelligent cooperative adaptive weight ranking policy via dynamic aging based on NB and J48 classifiers. Indonesian Journal of Electrical Engineering and Informatics, 5 (4). pp. 357-365. ISSN 2089-3272

Al-hashimi, Ahmad and Nordin, Anis Nurashikin and Azman, Amelia Wong (2017) Design of a reconfigurable, modular and multi-channel bioimpedance spectroscopy system. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 428-440. ISSN 2502-4752 E-ISSN 2502-4760

Ali, Maisarah and Oladokun, Majeed and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini and Ibrahim, Md Najib (2017) CFD investigation of indoor hygrothermal and airflow profile in academic research storage room: effect of lma on thermohygric balance and mould growth. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3080-3087. ISSN 1819-6608

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Anwar, Farhat and Islam, Rounakul and Mansor, Hasmah and Hussain, Sabahat and Sharmin, Afsah (2017) Development of approximate prediction model for 3-DOF helicopter and benchmarking with existing controllers. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 502-510. ISSN 2502-4752 E-ISSN 2502-4760

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Hamzah, Mohd. Salleh and Iis, Sopyan (2017) Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of Pakistan Academy of Sciences: B. Life and Environmental Sciences, 54 (B) (1). pp. 59-64. ISSN 2518-4261 E-ISSN 2518-427X

Arshad, Atika and Ismail, Ahmad Fadzil and Khan, Sheroz and Hashim, Wahidah and Hasan, Mohammad Kamrul (2017) Bedroom monitoring system for isolated elderly people and patients. Asian Journal of Pharmaceutical Research and Health Care, 9 (3). pp. 131-137. E-ISSN 2250-1460

Asan Gani, Abdul Muthalif and Kasemi, Hasanul and Nordin, Nor Hidayati Diyana and Rashid, Muhammad Mahbubur and Mohd Razali, Muhammad Khusyaie (2017) Semi-active vibration control using experimental model of magnetorheological damper with adaptive F-PID controller. Smart Structures and Systems, An International Journal, 20 (1). pp. 85-97. ISSN 1738-1584

Ashaari, Salbiah and Turaev, Sherzod and Mohd Tamrin, Mohd Izzuddin and Okhunov, Abdurahim and Zhukabayeva, Tamara (2017) Multiset controlled grammars. Journal of Theoretical and Applied Information Technology, 95 (22). pp. 6089-6098. ISSN 1992-8645 E-ISSN 1817-3195

Ashaari, Salbiah and Turaev, Sherzod and Mohd Tamrin, Mohd Izzuddin and Okhunov, Abdurahim and Zhukabayeva, Tamara (2017) Multiset controlled grammars: A normal form and closure properties. Indonesian Journal of Electrical Engineering and Computer Science, 8 (1). pp. 36-42. ISSN 2502-4760

Asneh, Ag. M. Asmulizan and Muthalif, Asan G. A. and Wahid, Azni N. and Haja Mohaideen, Ahmad Jazlan and Mohamad Hanif, Noor Hazrin Hany (2017) Piezoelectric based broadband nonlinear vibration energy harvester using multiple magnets. International Journal of Industrial Electronics and Electrical Engineering, 5 (12). pp. 47-51. ISSN 2347-6982 E-ISSN 2349-204X

Ayob, Mohd Fairullazi and Bidi, Nor Khalisah and Ahmad Jasmi, Siti Zulaiha and Wan Omar, Wan Imran and Ali, Maisarah (2017) Life cycle cost and performance assessment: comparison between reconstruction and cold-in-place recycling (CIPR) methods. Malaysian Construction Research Journal (MCRJ), 21 (1). pp. 17-32. ISSN 1985-3807

Ayub, Wan Nurhasana and Hasbullah, Nurul Fadzlin and Rashid, Abdul Aish Abdallah (2017) Electrical characterization of commercial power MOSFET under electron radiation. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 462-466. ISSN 2502-4752 E-ISSN 2502-4760

Azam, S. M. Kayser and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. and Hossain, Abul K. M. Zakir (2017) Microstrip coupled line bandpass filter with radial stubs for narrow-band applications. International Journal of GEOMATE, 13 (40). pp. 183-188. ISSN 2186-2982 E-ISSN 2186-2990

Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1024. ISSN 0954-4100 E-ISSN 2041-3025

Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1521. ISSN 0954-4100 E-ISSN 2041-3025

Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang (2017) Comparison of aircraft engine performance and emission analysis using alternative fuels. International Journal of Sustainable Aviation, 3 (1). pp. 43-63. ISSN 2050-0467 E-ISSN 2050-0475

Aziz, M.A. and Rashid, Muhammad Mahbubur and Islam, M.R. (2017) Design and fabrication of fixed bed pyrolysis reactor using scrap tire for pyrolysis oil production. International Journal of Renewable Energy Resources, 7 (1). pp. 1-7. ISSN 2289-1846

Badron, Khairayu and Ismail, Ahmad Fadzil and Basri, Atikah Balqis and Abdul Halim, Syafrina and Ismail, Maszlan Yusof B. and Salim, Hamid (2017) Free space attenuation analysis for X -band and S-band satellite link using meteorological radar data in the tropics. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (3-10). pp. 105-108. ISSN 2180-1843 E-ISSN 2289-8131

Banu, Aalya and Abdul Muthalif, Asan Gani (2017) Robust vibration control of flexible panel:modeling and simulation. World Journal of Engineering, 14 (5). pp. 433-442. ISSN 1708-5284

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2017) Experimental investigation on the effectiveness of active control mechanism on base pressure at low supersonic mach numbers. Lecture Notes in Mechanical Engineering, PartF9. pp. 197-209. ISSN 2195-4356 E-ISSN 2195-4364 (In Press)

Chen, Tiankai and Yao, Qiaofeng and Yuan, Xun and Nasaruddin, Ricca Rahman and Xie, Jianping (2017) Heating or cooling: temperature effects on the synthesis of atomically precise gold nanoclusters. The Journal of Physical Chemistry C, 121 (20). pp. 10743-10751. ISSN 1932-7447

Chowdhury, Md. Sazzad Hossien and Hashim, I. and Hosen, Md. Alal (2017) Solving linear and non-linear stiff system of ordinary differential equations by multi stage homotopy perturbation method. International Journal of Management and Applied Science, 3 (2). pp. 59-62. ISSN 2394-7926

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ahmad, Kartini and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics, 7. pp. 3962-3967. E-ISSN 2211-3797

Elagib, Sara B. and Hassan Abdalla Hashim, Aisha and Olanrewaju, Rashidah Funke (2017) A proposed architecture for generic and scalable CDR analytics platform utilizing big data technology. Advanced Science Letters, 23 (11). pp. 11149-11152. ISSN 1936-6612 E-ISSN 1936-7317

Elmoselhy, Salah A.M. and Faris, Waleed Fekry and Rakha, Hesham A. (2017) Validated analytical modelling of supercharging centrifugal compressors with vaneless diffusers for H2-biodiesel dual-fuel engines with cooled EGR. International Journal of Hydrogen Energy, 42 (43). pp. 26771-26786. ISSN 0360-3199

Fadhli, Mohd and Shamsudin, Syariful Syafiq and Omar, Ashraf Ali and Asrar, Waqar (2017) Arbitrary Lagrangian-Eulerian form of flowfield dependent variation method for fluid-structure interaction application. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2338-2344. ISSN 1819-6608

Faris, Waleed Fekry and Elmoselhy, Salah (2017) The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah, 22 (1). pp. 29-64. ISSN 1394-6870

GANIEV, Inomjon G. and Mukhamedov, Farrukh M. (2017) Conditional expectations and martingales in noncommutative Lp-spaces associated with center-valued traces. Acta Mathematica Scientia, 37 (4). pp. 1019-1032. ISSN 0252-9602

Ganiev, Inomjon G. and Hassan, Torla (2017) Abstract characterization of a conditional expectation operator on the space of measurable sections. Sains Malaysiana, 46 (1). pp. 175-179. ISSN 0126-6039

Ganiyev, Sabuhi and Khairi, Mohammad Azim and Ahmad Fauzi, Dhiyauddin and Abdullah, Yusof and Hasbullah, Nurul Fadzlin (2017) The effects of electron irradiation and thermal dependence measurements on 4H-SiC Schottky diode. Semiconductors, 51 (12). pp. 1666-1670. ISSN 1063-7826

Habib, A K M Ahasan and Motakabber, S. M. A. and Ibrahimy, Muhammad I. (2017) A series regeneration converter technique for voltage balancing of energy storage devices. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 475-481. ISSN 2502-4752 E-ISSN 2502-4760

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur (2017) Calcium phosphate cement for bone filler applications. Journal of Advanced Research in Materials Science, 39 (1). pp. 20-31. ISSN 2289-7992

Haque, Anwar Ul and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2017) Defining reference area for prediction of aerodynamic coefficients of a biologically inspired hybrid buoyant vehicle. Unmanned Systems, 5 (4). pp. 237-246. ISSN 2301-3850

Haris, Hazlihan and Muhammad, Ahmad Razif and Saidin, Norazlina and Zainal Abidin, Mohd. Shahnan and Arof, Hamzah and Paul, Mukul Chandra and Harun, Sulaiman Wadi (2017) Dual-wavelength thulium ytterbium Co-doped fiber laser. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 457-461. ISSN 2502-4752 E-ISSN 2502-4760

Hasan, Mohammad Kamrul and Ismail, Ahmad Fadzil and Hashim, Wahidah and Islam, Shayla and Hassan Abdalla Hashim, Aisha (2017) Outage probability analysis of Co-Tier interference in heterogeneous network. Elektronika ir Elektrotechnika, 23 (5). pp. 89-93. ISSN 1392-1215

Hossain, A. K. M. Zakir and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2017) A narrow band BPF for UWB RFID reader circuit for frequency extraction. International Journal of Engineering and Information Systems, 1 (7). pp. 104-112. ISSN 2000-000X

Ibrahim, Irmanisha and Nordin, Anis Nurashikin and Mohd Mansor, Ahmad Fairuzabadi and Hashim, Yumi Zuhanis Has-Yun and Voiculescu, Loana (2017) Content cytotoxicity studies of colorectal carcinoma cells using printed impedance sensors. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 317-326. ISSN 2089-3191

Ibrahim, Siti Noorjannah and Abdul Rahman, Farah and Rosli, Syaza (2017) Characterization of screen printed Ag-PDMS flexible electrode for electrical muscle stimulation (EMS). Indonesian Journal of Electrical Engineering and Informatics, 5 (4). pp. 295-303. ISSN 2089-3272

Ibrahimy, Muhammad Ibn and Hossain, Abul K. M. Zakir and Motakabber, S. M. A. (2017) Linear microstrip resonator for UWB RFID tag. International Journal of GEOMATE, 13 (40). pp. 167-172. ISSN 2186-2982 E-ISSN 2186-2990

Inche Ibrahim, Mohd Lukman (2017) Dissociation of charge-transfer states at donor–acceptor interfaces of organic heterojunctions. Journal of Physics D: Applied Physics, 50 (6). pp. 1-9. ISSN 0022-3727 E-ISSN 1361-6463

Islam, Mazharul and Fürst, Jiri and Wood, David (2017) CFD analysis of SD 7003 airfoil at low reynolds number with a laminar kinetic energy based transition model. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3112-3117. ISSN 1819-6608

Islam, Md. Rafiqul and Ali Hussein Budalal, Asma and Habaebi, Mohamed Hadi and Badron, Khairayu and Ismail, Ahmad Fadzil (2017) Performance analysis of rain attenuation on earth-to-satellite microwave links design in Libya. IOP Conference Series: Materials Science and Engineering, 260 (na). 012041. ISSN 1757-8981 E-ISSN 1757-899X

Ismail, Ahmad Fadzil and Hasan, Mohammad Kamrul and Othman, N.I and Hashim, Wahidah (2017) Assessment of dynamic spectrum allocation technique in heterogeneous network. International Journal of Future Generation Communication and Networking, 10 (3). pp. 41-48. ISSN 2233-7857

K. Shams, Wafaa and Htike@Muhammad Yusof, Zaw Zaw (2017) Oral cancer prediction using gene expression profiling and machine learning. International Journal of Applied Engineering Research, 12 (15). pp. 4893-4898. ISSN 0973-4562 E-ISSN 0973-9769

Kahlib, Nor Amyra Zulianey and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2017) Effect of dipping number on the fabricated silica ceramic membranes via sol dip-coating method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (Issue 1). pp. 19-24. ISSN 2462-1943

Kamaru Zaman, Fadhlan Hafizhelmi and Ali, Md Hazrat and Shafie, Amir Akramin and Rizman, Zairi Ismael (2017) Efficient human motion detection with adaptive background for vision-based security system. International Journal on Advanced Science, Engineering and Information Technology, 7 (3). pp. 1026-1031. ISSN 2088-5334 E-ISSN 2460-6952

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) Critical success factors for soft TQM and lean manufacturing linkage. Jordan Journal of Mechanical and Industrial Engineering, 11 (2). pp. 129-140. ISSN 1995-6665

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) A comparative evaluation of contemporary models for lean manufacturing practices. International Journal of Services and Operations Management, 28 (1). pp. 26-45. ISSN 1744-2370 E-ISSN 1744-2389

Khan, Md Noman Habib and Khan, Sheroz (2017) Leakage current energy harvesting application in a photovoltaic (PV) panel transformerless inverter system. The Korean Institute of Electrical and Electronic Material Engineers, 18 (4). pp. 190-194. ISSN 1229-7607 E-ISSN 2092-7592

Kourra, Nadia and Warnett, Jason and Attridge, Alex and Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart and Williams, Mark and UNSPECIFIED (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. ISSN 0268-3768 E-ISSN 1433-3015

Liu, Yanbiao and Zheng, Yuying and Du, Bowen and Nasaruddin, Ricca Rahman and Chen, Tiankai and Xie, Jianping (2017) Golden carbon nanotube membrane for continuous flow catalysis. Industrial & Engineering Chemistry Research, 56 (11). pp. 2999-3007. ISSN 0888-5885

M. Razali, M. Khusyaie and Abdul Muthalif, Asan Gani and Nordin, N. H.Diyana and Abdul Hamid, Syamsul Bahrin (2017) Improved parameter estimation for MRF models for varying current. Advanced Science Letters, 23 (11). pp. 11002-11006. ISSN 1936-6612 E-ISSN 1936-7317

Mahmod, Zainab S. and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Anwar, Farhat and Hameed, Shihab A. (2017) Development of gateway discovery and selection scheme for MANEMO (MGDSS). International Journal of Future Generation Communication and Networking, 10 (3). pp. 81-90. ISSN 2233-7857

Mahmod, Zainab S. and Hassan Abdalla Hashim, Aisha and Othman, Othman Omran and Anwar, Farhat and Hameed, Shihab A. (2017) The effect of network’s size on the performance of the gateway discovery and selection scheme for MANEMO. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 5 (4). pp. 351-356. ISSN 2089-3272

Maqbool, Hafiz Farhan and Husman, Muhammad Afif and Awad, Mohammed I. and Abouhossein, Alireza and Iqbal, Nadeem and Dehghani-Sanij, A. A. (2017) A real-time gait event detection for lower limb prosthesis control and evaluation. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 25 (9). pp. 1500-1509. ISSN 1534-4320 E-ISSN 1558-0210

Md Ralib, Aliza Aini and Mortada, Ossama and Orlianges, Jean Christophe and Crunteanu, Aurelian and Chatras, Matthieu and Nordin, Anis Nurashikin (2017) Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform. Journal of Materials Science: Materials in Electronics, 28 (12). pp. 9132-9138. ISSN 0957-4522 E-ISSN 1573-482X

Md. Zaki, Fatimah Audah and Zulkurnain, Nurul Fariza (2017) Towards scalable algorithm for closed itemset mining in high-dimensional data. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 487-494. E-ISSN 2502-4752

Mehdi, Wesen Adel and Yusof, Faridah and Farhan, Layla Othman and Mehde, Atheer Awad and Ahmad Raus, Raha (2017) Levels of antioxidant enzymes and alkaline protease from pulp and peel of sunflower. Asian Pacific Journal of Tropical Biomedicine, 7 (6). pp. 533-537. ISSN 2221-1691

Mohamed, Sahimi and Abdul Razak, Tariq and Hashim, Rosnani and Mohd Ali, Zarina (2017) Knowledge of atrial fibrillation and stroke prevention: development of questionnaire and validation of results. Journal of Pharmacy Technology, 33 (1). pp. 31-39. ISSN 8755-1225 E-ISSN 1549-4810

Mohammed Sapardi, Mohd Azan and Hussam, Wisam K. and Potherat, Alban and Sheard, Gregory J. (2017) Linear stability of confined flow around a 180-degree sharp bend. Journal of Fluid Mechanics, 822. pp. 813-847. ISSN 0022-1120 E-ISSN 1469-7645

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Abdullah, Azween and Mohd. Ramli, Huda Adibah (2017) A novel fast reroute signaling cost for multicast proxy mobility. Advanced Science Letters, 23 (11). pp. 10986-10990. ISSN 1936-6612 E-ISSN 1936-7317

Mohd Aman, Azana Hafizah and Hassan Abdalla Hashim, Aisha and Mohd. Ramli, Huda Adibah (2017) Throughput and handover latency evaluation for multicast proxy mobile IPV6. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 311-316. ISSN 2302-9285

Mohd Azam, Siti Nurfarah Ain and Sidek, Khairul Azami (2017) Study of acceleration plethysmogram based biometric identification incorporating different time instances. Advanced Science Letters, 23 (11). pp. 11335-11339. ISSN 1936-6612 E-ISSN 1936-7317

Mohd Nawi, Mohd Nazri and Mt Aznam, Suazlan and Abd Wahab, Mohd Firdaus and Syed Abu Bakar, Syed Noh (2017) Lontaran idea produk 2017: Pendedahan awal buat inovator muda. Sinar Harian. p. 8.

Mt Aznam, Suazlan and Mori, Shoji and Ogoshi, Azuki and Okuyama, Kunito (2017) CHF enhancement of a large heated surface by a honeycomb porous plate and a gridded metal structure in a saturated pool boiling of nanofluid. International Journal of Heat and Mass Transfer, 115. pp. 969-980. ISSN 0017-9310

Musa, Ibrahim and Khaza'ai, Huzwah and Abdul Mutalib, Mohd Sokhini and Yusof, Faridah and Sanusi, Junedah and Chang, Sui Kiat (2017) Effects of oil palm tocotrienol rich fraction on the viability and morphology of astrocytes injured with glutamate. Food Bioscience, 20. pp. 168-177. ISSN 2212-4292 E-ISSN 2212-4306

Nor Hairin, Assayidatul Laila and Othman, Raihan and Rizal, Faireez and Mohd Daud, Farah Diana (2017) Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent. International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue, Special issue. pp. 493-498. ISSN 2581-4311

Nordin, Anis Nurashikin and Ramli, Nabilah (2017) Flexible and stretchable circuits for smart wearables. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8). pp. 117-122. ISSN 2180-1843 E-ISSN 2289-8131

Olanrewaju, Rashidah Funke and Fajingbesi, Fawwaz Eniola and Junaid, S. B. and Alahudin, Ridzwan and Anwar, Farhat and pampori, Bisma Rasol (2017) Design and implementation of a five stage pipelining architecture simulator for RiSC-16 instruction set. Indian Journal of Science and Technology, 10 (3). pp. 1-9. ISSN 0974-6846 E-ISSN 0974-5645

Olanrewaju, Rashidah Funke and Islam, Thouhedul and Khalifa, Othman Omran and Anwar, Farhat and Pampori, Bisma Rasool (2017) Cryptography as a Service (CaaS): Quantum cryptography for secure cloud computing. Indian Journal of Science and Technology, 10 (7). pp. 1-7. ISSN 0974-6846 E-ISSN 0974-5645

Olanrewaju, Rashidah Funke and Khan, Burhan Ul Islam and Mattoo, M. Mueen Ul Islam and Anwar, Farhat and Nordin, Anis Nurashikin and Mir, Roohie Naaz (2017) Securing electronic transactions via payment gateways: a systematic review. International Journal Internet Technology and Secured Transactions, 7 (3). pp. 245-269. ISSN 1748-569X E-ISSN 1748-5703

Olanrewaju, Rashidah Funke and Zaharii, Nur Syarafina and Aibinu, Abiodun Musa (2017) A new automatic method of parkinson disease identification using complex-valued neural network. Journal of Medical and Bioengineering, 6 (1). pp. 25-28. ISSN 2301-3796

Onumanyi, A. J. and Onwuka, Elizabeth Nonye and Aibinu, Abiodun Musa and Ugweje, Okechukwu C. and Salami, Momoh Jimoh Eyiomika (2017) A modified Otsu's algorithm for improving the performance of the energy detector in cognitive radio. AEU - International Journal of Electronics and Communications, 79. pp. 53-63. ISSN 1434-8411 E-ISSN 1618-0399

Onumanyi, A. J. and Onwuka, Elizabeth Nonye and Aibinu, Abiodun Musa and Ugweje, Okechukwu C. and Salami, Momoh Jimoh Eyiomika (2017) A modified Otsu’s algorithm for improving the performance of the energy detector in cognitive radio. AEU - International Journal of Electronics and Communications, 79. pp. 53-63. ISSN 1434-8411 E-ISSN 1618-0399

Rafiq, Hashum M. and Siddiqi, Mohammad Umar (2017) Haar spectrum based construction of resilient and plateaued boolean functions. International Journal of Computer Applications, 158 (5). pp. 18-25. ISSN 2250-1797

Rahaman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn (2017) A zero crossing PWM controller of a full bridge single phase synchronous inverter for microgrid systems. International Journal of Engineering and Information Systems, 1 (6). pp. 202-211. ISSN 2000-000X E-ISSN 2000-000X

Rahman, Mohammed Ataur (2017) Thermoelectric technology for IC engine waste energy harvesting:
liquid cooling approach. International Journal of Scientific and Engineering Research, 7 (11). pp. 1-12. ISSN 2229-5518 (In Press)

Rahman, Mohammed Ataur and Afroz, Rafia and Safrin, Mohd (2017) Recycling and disposal of lithium batteries: an economical and environmental approach. IIUM Engineering Journal, 18 (2). pp. 238-252. ISSN 1511-788X E-ISSN 2289-7860.

Rahman, Shaikh Mohammad Ehsanur and Anwar, Farhat and Hassan Abdalla Hashim, Aisha (2017) Performance Enhancement of NEMO based VANET using localization Router (LR) to reduce handoff delays. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 511-521. ISSN 2502-4752 E-ISSN 2502-4760

Rahman, Tawfikur and Motakabber, S. M.A. and Ibrahimy, Muhammad Ibn and Wahidur Rahman, Mozasser (2017) An enhanced zero crossing based HVAC phase synchronous inverter for electrostatic generator in microgrid systems. Indonesian Journal of Electrical Engineering and Informatics, 5 (4). pp. 285-294. ISSN 2089-3272

Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2017) Obstacle detection technique using multi sensor integration for small unmanned aerial vehicle. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 441-449. ISSN 2502-4752 E-ISSN 2502-4760

Reza, Asif and Abdullah, Khaizuran and Ismail, Ahmad Fadzil and Raisa, Farah and Mohd Ramli, Huda Adibah and Hashim, Wahidah (2017) Dynamic frequency reuse: a method for interference mitigation in OFDMA Based LTE-A Networks. International Journal of Future Generation Communication and Networking, 10 (4). pp. 11-18. ISSN 2233-7857

Ruthiraan, Manimaran and Abdullah, Ezzat Chan and Mubarak, N.M. and Mohamed Noor, Noraini (2017) A promising route of magnetic based materials for removal of cadmium and methylene blue from waste water. Journal of Environmental Chemical Engineering, 5 (2). pp. 1447-1455. ISSN 2213-3437

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Hamzah, Mohd. Salleh and Nordin, Norshariza and Iis, Sopyan and Jimat, Dzun Noraini (2017) Statistical optimization of gelatin immobilisation on modified surface of PCL microcarrier to improve its compatibility. Jurnal Teknologi, 79 (6). pp. 167-175. E-ISSN 2180-3722

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Mohd Salleh, Hamzah and Sopyan, Iis and Jimat, Dzun Noraini (2017) Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance. Cytotechnology, 69 (4). pp. 601-616. ISSN 0920-9069 E-ISSN 1573-0778

Shams, Wafaa Kazaal and Htike@Muhammad Yusof, Zaw Zaw (2017) Application of machine learning to determine the characteristics of adjacent normal tissues in liver cancer. International Journal of Applied Engineering Research, 12 (22). pp. 12319-12321. ISSN 0973-4562

Shuriye, Abdi Omar (2017) رؤية محمد رشيد رضا حول الظواهر السياسية في العامل العربي = Mohammed Rashid Rida's vision of political phenomena in the Arab world. Australian Journal of Islamic Studies, 8. pp. 1-29. ISSN 1834-6170 E-ISSN 2208-469X

Shuriye, Abdi Omar and Ahmad, Kamil Mahmud (2017) دور ليبيا - دولة العبور- في محاية حقوق اللاجئين و المهاجرين غير الشرعين = The role of Libya - the state of transit - in protecting the rights of refugees and illegal immigrants. Australian Journal of Islamic Studies, 8. pp. 51-67. ISSN 1834-6170 E-ISSN 2208-469X

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on temperature setting for extruding polylactic acid using open-source 3D printer. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 1348-1353. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on the impact process parameters on tensile strength using 3d printer repetier-host software. ARPN Journal of Engineering and Applied Sciences, 12 (102). pp. 3341-3346. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Optimization of the parameters for surface quality of the open-source 3D printing. Journal of Mechanical Engineering, Special Issue 3 (1). pp. 33-43. ISSN 1823- 5514 E-ISSN 2550-164X

Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) The Influence of tool texture on friction and lubrication in strip reduction testing. Lubricants, 5 (3). pp. 1-11. ISSN 2075-4442

Tomadi, Siti Haryani and A. Ghani, Jaharah and Che Haron, Che Hassan and Hassan, Mas Ayu and Daud, Rosdi (2017) Effect of cutting parameters on surface roughness in end milling of AlSi/AlN metal matrix composite. Procedia Engineering, 184. pp. 58-69. ISSN 18777058

Wan Azahar, Wan Nur Aifa and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Bujang, Mastura and Ngadi, Norzita (2017) Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil. Construction and Building Materials, 150. pp. 653-663. ISSN 0950-0618

Wan Yusoff, Wan Ahmad Yusmawiza (2017) The application of scanning electron microscope and melt flow index for orange peel in laser sintering process. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 615-622. ISSN 2502-4752

Zhang, Xudong and Wang, William and Nordin, Anis Nurashikin and Li, Fang and Jang, Sunghoon and Voiculescu, Ioana R. (2017) The influence of the electrode dimension on the detection sensitivity of electric cell–substrate impedance sensing (ECIS) and its mathematical modeling. Sensors and Actuators, B: Chemical, 247. pp. 780-790. ISSN 0925-4005

al-Ahsan, Abdullah (2017) The never-ending Kashmir dispute and its implications on the contemporary global governance and peace. Al-Shajarah, 22 (1). pp. 1-27. ISSN 1394-6870

Book

Faris, Waleed Fekry and Kamaruzaman, Kamar Oniah and Abdullah, Fatimah, eds. (2017) Muslim women’s contributions to society. Centre for Muslims World Affairs, Kuala Lumpur. ISBN 978 –967 –2041–10– 8

Abd Latif, Muhamad Hafiz and Md. Yusof, Hazlina and Sidek, Shahrul Na'im (2017) Development of affective states model based on thermal imaging. IIUM Press, Kuala Lumpur, Malaysia. ISBN 978-967-418-474-2

Abdelmohsen, Benoudjit and Wan Salim, Wan Wardatul Amani (2017) Robust electrochemical transducer using conductive polymer (PEDOT:PSS) composite for glucose biosensor application. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-471-1

Al-Khatib, Ma'an Fahmi Rashid (2017) Adsorbed natural gas storage by experimental and simulation approaches. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-495-7

Arris, Farrah Aida and Wan Salim, Wan Wardatul Amani (2017) Optimization and characterization of graphene nanocomposites for glucose biosensors. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-470-4

Ashraf, Qazi Mamoon and Kabbashi, Nassereldeen Ahmed and Alam, Md Zahangir and Muyibi, Suleyman Aremu and Ameen, Emad S.M. and Olanrewaju, Rashidah Funke (2017) Powdered activated carbon for removal of phenol and treatment of palm oil mill final effluent. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-489-6

Fatai, Sado and Sidek, Shahrul Na'im (2017) Development of discrete event system (DES)-based controller. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-475-9

Ghazali, Aimi Shazwani and Sidek, Shahrul Na'im (2017) In-the-loop emotion recognition system for Human Machine Interaction (HMI). IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-473-5

Habaebi, Mohamed Hadi and Ashraf, Qazi Mamoon (2017) Autonomic Internet of Things. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-487-2

Habaebi, Mohamed Hadi and Zyoud, Alhareth (2017) Femtocell path loss and interference modelling in 4G wireless networks. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-488-9

Habaebi, Mohamed Hadi and Zyoud, Alhareth M T (2017) Femtocell part loss and interference modelling in 4g wireless networks. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-488-9

Hossain, A.K.M. Zakir and Ibrahimy, Muhammad Ibn and Motakabber, S. M. A. (2017) Analog front-end: UWB chipless RFID system. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 9789674184933

Htoon, Zaw Lay and Sidek, Shahrul Na'im (2017) Upper-limb impedance parameters-based model for motor recovery. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-476-6

Jamaluddin, Mohd Jamil Aizat and Amid, Azura (2017) Production of intracellular recombinant bromelain by Escherichia coli BL21-AI using shake flask and stirred tank bioreactor. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-492-6

Khalaf, Abubakir Ibraheem and Alam, Md. Zahangir (2017) Optimization of amylase production from bitter manihot esculenta using Aspergillus Niger. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-494-0

Mohd Yunus, Mohamad Yazid and Ali, Maisarah (2017) A study on life cycle of maintenance during the in use phases of flexible pavement from Pagoh to Machap. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-641-8

Mostafa, Mohammad Golam and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn (2017) Piezoelectric micro-energy harvesting technique. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-548-0

Mustapa, Mokhzanni and Raus, Raha Bt. Ahmad (2017) Lutein production by Scenedesmus Obliquus cultivated in stirred-tank bioreactor. IIUM Press, International Islamic University Malaysia, Kuala Lumpur , Malaysia. ISBN 978-967-418-491-9

Saad, Siti Asmahani and Mohamed Osman, Mariana and Nuruddin, Muhd Fadhil (2017) Geopolymer concrete: effect of husk ash to compression and its microstructure properties. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-540-4

Sanober, Fahmi and Wan Salim, Wan Wardatul Amani (2017) Fabrication and characterization of graphene-based immunosensor. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-469-8

Sanober, Fahmi and Wan Salim, Wan Wardatul Amani (2017) Fabrication and characterization of graphene-based immunosensor for E. coli O157:H7 detection. IIUM Press, Kuala Lumpur. ISBN 9789674184698

Shuib, Mohd Syamsyul and Ali, Maisarah (2017) Security determinants in building automation system. IIUM Press, Kuala Lumpur. ISBN 978-967-418-549-7

Siddiqi, Abdul Rahman and Sidek, Shahrul Na'im (2017) EMG based continuous thumb-tip force model for prostheses design. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-472-8

Siddiqui, Mohammad Tahir and Zyoud, Alhareth (2017) Dynamic spectrum management in cognitive radio networks. IIUM Press, International Islamic University Malaysia, Kuala Lumpur , Malaysia. ISBN 978-967-418-486-5

Book Chapter

Azmi, Azlin Suhaida and Shaharuddin, Khairulbariah and Mel, Maizirwan (2017) Cassava leaves and stems hydrolysis for glucose production. In: Advances in bio-environmental engineering. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 1-8. ISBN 9789674185473 (In Press)

Mohd. Yusoff, Marmeezee and Mamat, Mohamad Hafiz and Mahmood, Mohamad Rusop (2017) Synthesis of titanium dioxide nanorod arrays using a facile aqueous sol-gel route for ultraviolet photosensor applications. In: Recent applications in sol-gel synthesis. IntechOpen, pp. 131-150. ISBN 978-953-51-3245-5

Proceeding Paper

A. Aziz, M. Rashdi and Htike@Muhammad Yusof, Zaw Zaw (2017) ANN-based mango external quality grading system. In: First Bi-annual Engineering Conference on Undergraduate Research, 17 Jan 2017, Gombak. (Unpublished)

Abd Halim, Nor Farah Huda and Ascrofta, Helen and Barnes, Stuart (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: Advances in Material and Processing Technologies Conference (AMPT 2017), 11th December 2017-14th December 2017, Chennai, India.

Abd Halin, Nur Iilani and Al-Khatib, Ma'an Fahmi Rashid and Mohd. Salleh, Hamzah (2017) Immobilization of lipase candida rugosa on nylon 6 polymer grafted with poly venylbenzyl chloride (PVBC). In: ASIA International Multidisciplinary Conference 2017, 1st-2nd May 2017, Johor Bahru, Johor.

Abdul Aziz, Mohammad and Al-khulaidi, Rami Ali and Rashid, Muhammad Mahbubur and Islam, Mohammad Rofiqul and Rashid, Mamunur A.N. (2017) Design and fabrication of a fixed-bed batch type pyrolysis reactor for pilot scale pyrolytic oil production in Bangladesh. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abdullah, Nur Azam and Curiel-Sosa, J.L. and Taylor, Zeike A. and Tafazzolimoghaddam, Behrooz and Vicente, J.L Martinez (2017) Modelling of transversal crack and delamination under traction with XFEM. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)

Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2017) Flutter assessment on composite plate with crack by means of fully coupled Finite Element and Doublet Lattice Method. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)

Aboadla, Ezzidin Hassan Elmabrouk and Aznan, Khairil Azhar and Tohtayong, Majdee and Khan, Sheroz and Hannan, Mohammad A. and Uddin, M. Nasir (2017) Low spikes and low harmonic distortion multilevel inverter for induction motor implementation. In: 2017 IEEE Industry Applications Society Annual Meeting, 1st-5th October 2017, Cincinnati, OH, USA.

Ahmad Azhar, Ahmad Zahirani and Mokhtar,, Mokhzani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Effects of TiN single layer coating on the wear of ZTA cutting inserts and surface roughness of workpiece. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2016, 17-18 August, 2016, Dorsett Hotel, Putrajaya.

Ahmad Fuad, Fazia Adyani and Abdul Hamid, Azzmer Azzar and Saadun, Rafidah (2017) Identifying potential inhibitors of human hexokinase II for the development of anti-dengue therapeutics via virtual screening approaches. In: 4th Asian Regional Conference on Systems Biology, 20-22 Nov 2017, Putrajaya.

Al Katsha, Mhd Zaher and Mohd. Ramli, Huda Adibah (2017) Development of a novel component carrier selection algorithm in long term evolution-advanced (LTE-A) with carrier aggregation. In: 14th Student Conference on Research and Development, IEEE (SCOReD 2016), 13th-14th December 2016, Kuala Lumpur.

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Nordin, Rosmarina (2017) Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Anwar, Farhat and Boby, Rounaqul Islam and Rashid, Muhammad Mahbubur and Alam, Md. Monjurul and Shaikh, Z. (2017) Network-based real-time integrated Fire Detection and Alarm (FDA) system with building automation. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15-17 Nov 2017, Putrajaya, Malaysia.

Chowdhury, Silvia and Yusof, Faridah and Sulaiman, Nadzril and Faruck, Mohammad Omer (2017) A novel approach of core-shell Ag@Pt nanoparticles production. In: 5th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2016 and International Conference on Materials Technology and Applications, ICMTA 2016, 29 October - 31 October 2016, Singapore.

Curiel-Sosa, J.L. and Tafazzolimoghaddam, Behrooz and Navarro-Zafra, Joaquin and Akbar, Mahesa and Abdullah, Nur Azam and Ahmad, Meor iqram Meor (2017) Modelling techniques for delamination and fracture of composites. In: 7th International Conference on Mechanics and Materials in Design,, 11th-15th June 2017, Albufeira, Portugal.

Elsamnah, Fahed and Sediono, Wahju and Al Jeroudi, Yazan (2017) Positioning estimation of undetected marker using Kalman filter for colored reference markers based image-guided surgery system. In: International Exchange and Innovation Conference on Engineering & Sciences (IEICES), 19th-20tth October 2017, Fukuoka, Japan.

Fajingbesi, Fawwaz Eniola and Midi, Nur Shahida and Khan, Sheroz (2017) Analytical investigation of step-square wave in time and frequency domain using transform equations. In: International Technical Postgraduate Conference 2017, Tech-Post 2017, 5-6 April 2017, Faculty of Engineering, University of MalayaKuala Lumpur.

Fajingbesi, Fawwaz Eniola and Midi, Nur Shahida and Khan, Sheroz (2017) A novel multilevel DC - AC converter from green energy power generators using step-square waving and PWM technique. In: International Technical Postgraduate Conference 2017, Tech-Post 2017, 5 - 6 April 2017, University of Malaya, Kuala Lumpur.

Ganiev, Inomjon and Mukhamedov, Farrukh and Bekbaev, Dilmurad (2017) A few remarks on "zero-Two" law for positive contractions in the Orlicz-Kantorovich spaces. In: 37th International Conference on Quantum Probability and Related Topics (QP37), 22-26 August 2016, Kuantan, Pahang.

Ghazilan, A. L.Ahmad and Mokhtar, Hanan and Shaik Dawood, Mohd Sultan Ibrahim and Aminanda, Yulfian and Mohamed Ali, Jaffar Syed (2017) Effect of stitching on the tensile mechanical property of empty fruit bunch oil palm fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.

Hamdan, Taufik Hakim and Mansor, Ahmad Fairuzabadi and Abbas, Phirdaous and Nordin, Anis Nurashikin and Hashim, Yumi Zuhanis Has-Yun (2017) Toxicity studies of natural product in vero cells using impedance monitoring. In: International Medical Device and Technology Conference (iMEDiTEC 2017), 6th-7th September 2017, Johor Bahru, Johor.

Haseeb, Shariq and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Ismail, Ahmad Faris (2017) Network Function Virtualization (NFV) based architecture to address connectivity, interoperability and manageability challenges in Internet of Things (IoT). In: 6th International Conference on Mechatronics - ICOM'17, 8th–9th August 2017, Kuala Lumpur.

Hrairi, Meftah (2017) 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016", 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur; Malaysia.

Ihsan, Sany Izan and Mohamad Safian, Mohamad Ariff Iskandar and Mohd Taufek, Muhammad Aliff and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th - 27th July 2016, Kuala Lumpur, Malaysia.

Islam, M and Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen (2017) Dynamics and control of quadcopter using linear model predictive control approach. In: 1st AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.

Khairol Fauzi, Muhammad Zarol Fitri and Elsheikh, Elsheikh Mohamed Ahmed (2017) The impact of time and power allocation on the performance of the three-node decode and-forward relay channel. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Latief, Marsad and Khorsidtalab, Aida and Saputra, Irwan and Akmeliawati, Rini and Nordin, Anis Nurashikin and Jaswir, Irwandi and Witjaksono, Gunawan (2017) Rapid lard identification with portable electronic nose. In: 6th International Conference on Mechatronics - ICOM'17, 8-9 Aug 2017, Kuala Lumpur.

Madaki, A. G. and Roslan, R. and Kandasamy, Ramasamy and Chowdhury, Md. Sazzad Hossien (2017) Flow and heat transfer of nanofluid over a stretching sheet with non-linear velocity in the presence of thermal radiation and chemical reaction. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016;, 15-17 November 2016, Putrajaya, Malaysia.

Mangun, Firdause and Mahmoud Idres, Moumen Mohammed and Abdullah, Kassim Abdulrahman and UNSPECIFIED (2017) Design optimization of a hybrid electric vehicle powertrain. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Md Nor, Khairul Affendy and Mace, Brian R. and Hioka, Yusuke (2017) Adaptive control of radiated sound power based on time-domain estimates of acoustic radiation modes. In: 24th International Congress on Sound and Vibration, ICSV 2017 2017, 23rd-27th July 2017, London; United Kingdom.

Moghadam, Marcel and Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) Acoustic emission monitoring of the bending under tension test. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-22nd September 2017, Cambridge, United Kingdom.

Monsur, Hammed Ademola and Hamid, Anis Hamizah and Asiyanbi-H, Tawakalit Tope and Mirghani, Mohamed Elwathig Saeed and Jaswir, Irwandi and Ahmad Fadzillah, Nurrulhidayah (2017) Emerging sustainable technologies for transformation of gelatin and gelatin-based films. In: ASIA International Multidisciplinary Conference 2017 (AIMC 20170, 1st-2nd May 2017, Johor Bharu, Malaysia. (Unpublished)

Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn (2017) Characteristics Analysis of Electrostatic Generator. In: ISERD - International Conference on Recent Innovations in Engineering and Technology (ICRIET), 18-19 January 2017, Seoul, Korea.

Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Hossain, A.K.M. Zakir (2017) Generating an energy efficient discrete chirp signal for UWB chipless RFID reader circuit. In: International Conference On Electrical and Electronics Engineering (ICEEE), 23rd-24th June 2017, Rome, Italy.

Muhamad Khairussaleh, Nor Khairusshima and A.K., Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fiber reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference 2017, 11th-14th December 2017, Chennai; India.

Olanrewaju, Rashidah Funke and Asifa Mehraj Baba, Asifa Mehraj and Khan, Burhan Ul Islam and Yaacob, Mashkuri and Azman, Amelia Wong and Mir, Mohammad Shuaib (2017) An efficient cache replacement algorithm for minimizing the error rate in L2-STT-MRAM caches. In: 2016 Fourth International Conference on Parallel, Distributed and Grid Computing(PDGC), 22nd-24th December 2016, Jaypee, India.

Othman, Azam and Shafie, Amir Akramin and Zainal Abidin, Zulkifli and Mohd Mustafah, Yasir and Pawanchee, Shahril and Amir, Nur Syamimi and Shabu, Shahrul Fhaizal and Abdul Aziz, Mazlan (2017) Accelerated learning programme for robotic competition. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ibrahim, Shaliza and Mohamed Ariff, Tasnim Firdaus (2017) Enhanced freshwater production using finned-plate air gap membrane distillation (AGMD). In: 2016 International Symposium on Civil and Environmental Engineering, ISCEE 2016, 5-6 December 2016, Novotel Melaka,.

Rahman, Mohammed Ataur and Rahman, Mizanur and Rashid, Muhammad Mahbubur (2017) Wireless battery management system of electric transport. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.

Rahman, Tawfikur and Motakabber, S. M. A. and Ibrahimy, Muhammad Ibn and Md Ralib @ Md Raghib, Aliza 'Aini (2017) A PWM controller of a full bridge single-phase synchronous inverter for micro-grid system. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ramlee, Mohd Rais Hakim and Md. Yusof, Hazlina (2017) Design and development of gripping assistive device for post — Stroke rehabilitation. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017, 28th-30th November 2017, Putrajaya.

Rasedee, Ahmad Fadly Nurullah and Rakhimov, Abdumalik and Akhmedov, Anvarjon (2017) Uniform convergence of the Fourier-Laplace series. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15th-17th November 2016, Putrajaya, Malaysia.

Rashid, Muhammad Mahbubur and Abdul Aziz, Mohammad and Khan, Md. Raisuddin (2017) An experimental design of bypass Magneto-Rheological (MR) damper. In: 6th International Conference on Mechatronics 2017 (ICOM'17), 8th-9th August 2017, Kuala Lumpur.

Shazri, Syireen and Idres, Moumen (2017) Numerical investigation of magnetic nanoparticles trajectories for magnetic drug targeting. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) Influence of tool texture on friction and lubrication in strip reduction. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-21st September 2017, Cambridge, United Kingdom.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) A study of DLC coatings for ironing of stainless steel. In: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming, 2nd-6th July 2017, Munich, Germany.

Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and H. Noor, Azlina and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn curloaded poly(lactic acid) fibers. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.

Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and Hassan, Noor Azlina and Muhammad Khairusalleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017", 11 - 14 December 2017, Vellore Institute of TechnologyChennai; India.

Tasnim, Rumana and Khan, Sheroz and Arshad, Atika (2017) Assessing the solid mass flow sensing behaviour through capacitive sensing technique. In: 14th Student Conference on Research and Development, IEEE (SCOReD 2016), 13th-14th December 2016, Kuala Lumpur, Malaysia.

Tengku Azmi, Tengku Muhammad Afif and Sulaiman, Nadzril (2017) Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: The Second International Conference On Computational Science And Engineering 2017 (ICCSE 2017), 20-30 November 2017, Kuala Lumpur. (Unpublished)

Thriumani,, Reena and Zakaria, Ammar and Hashim, Yumi Zuhanis Has-Yun and Helmy, Khaled Mohamed and Omar, Mohammad Iqbal and Jeffree, Amanina Iymia and Adom, Abdul Hamid and Md Shakaff, Ali Yeon and Kamarudin, Latifah Munirah (2017) Feature extraction techniques using multivariate analysis for identification of lung cancer volatile organic compounds. In: "11th Asian Conference on Chemical Sensors, ACCS 2015", 16- 18 November 2015, Rasa Sayang Resort- Shangri- La PenangPenang; Malaysia.

Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2017) Morphing Wing I - finite element modelling of a NiTi SMA wire. In: 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017), 5 - 8 June 2017, Madrid, Spain.

Wan Salim, Wan Wardatul Amani (2017) Design and fabrication of biochemical sensors: Innovative materials that enhance electrochemical transduction. In: Short Courses on Contaminated Land and Water, University of Manchester, UK, 20-21 March 2017, School of Earth and Environmental Science. (Unpublished)

Wan Salim, Wan Wardatul Amani (2017) Finding PASSION by DOing the things you do WELL. In: Women's Forum, 26th April 2017, Tronoh, Perak, Malaysia. (Unpublished)

Witjaksono, Gunawan and Saputra, Irwan and Latief, Marsad and Jaswir, Irwandi and Akmeliawati, Rini and Abdelkreem Saeed Rabih, Almur (2017) Non-halal biomarkers identification based on fourier transform infrared spectroscopy (FTIR) and gas chromatography-time of flight mass spectroscopy (GC-TOF MS) techniques. In: International Conference on Applied Photonics and Electronics 2017 (InCAPE2017), 9th-10 August 2017, Port Dickson, Negeri Sembilan.

Yusof, M. S. and Toha, Siti Fauziah and Kamisan, N. A. and Nik Hashim, Nik Nur Wahidah and Abdullah, Muhammad Amirul (2017) Battery cell balancing optimisation for battery management system. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25–27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Zakaria, Abd Hafiz and Mohd Mustafah, Yasir and Abdullah, Jaafar and Alang Rashid, Nahrul Khair and Abdullah, Taufiq (2017) Development of autonomous radiation mapping robot. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016, 17 - 20 December 2016, Hosei UniversityTokyo; Japan.

Monograph

Halim, Zahurin and Ahmad, Zuraida and Sharif, Safian and Kalam, Anizah (2017) Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. Project Report. UNSPECIFIED. (In Press)

Htike@Muhammad Yusof, Zaw Zaw (2017) End of Project: RIGS16-350-0514. Project Report. UNSPECIFIED. (Unpublished)