Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2018

Ahmad Azhar, Ahmad Zahirani and Ahmad, Zainal Arifin and Maleque, Md. Abdul and Anuar, Hazleen and Rejab, Nik Akmar and Sarifuddin, Norshahida and Ab Rahman, Mohd Fariz and Ahmadipour, Mohsen, eds. (2018) International Journal of Current Research in Science & Technology. UR Publishers, Telangana, India. ISBN 2581-4311 (ISSN)

-, Suryanto and Mahmood, Mahmood Hameed and Hazza Faizi Al Hazza, Muataz and Haider I., Farag (2018) Developing of corrosion resistance nano copper oxide coating on copper using anodization in oxalate solution. International Journal of Engineering TRANSACTIONS C: Aspects, 31 (3). pp. 450-455. ISSN 1735-9244

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 -9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Ab Tahir, Aliff and Nik Wan Zainun, Wan Hairilamei and Sukindar, Nor Aiman (2018) Kajian kesan suhu terhadap proses pengeringan halwa terung asam dengan menggunakan ketuhar perolakan. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Hassan, Noor Azlina and Mohd Apandi, Siti Nur E'zzati and Ali, Fathilah and Manshhor, Mohd Romainor (2018) Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 447-451. ISSN 2581-4311

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi (2018) Effect of UV radiation on degradation of durian skin fibre composite. International Journal of Engineering Materials and Manufacture, 3 (2). pp. 105-112.

Abdillah, Muhamad Arif and Abd Latif, Mohd Arif Hafizi and Adnan, Ammar and Mat Hasan, Mohd Raziff and Sidek, Atiah Abdullah and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of universal series bus (USB) charging cable designs. Human Factors and Ergonomics Journal, 3 (1). pp. 39-43. E-ISSN 2590-3750

Abdul Aziz, Mohammad and Halim, Zahurin and Othman, Maizatulnisa (2018) Effect of different concentration of sodium hydroxide [NaOH] of sodium hydroxide [NaOH] on Kenaf sandwich structures. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Abdul Rahman, Nur Salihah and Al Hazza, Muataz Hazza Faizi and Kays, Emrul (2018) Minimizing makespan of multimachine production system in flow shop environment by means of mixed integer programming model. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1101-1110. ISSN 0976-6340 E-ISSN 0976-6359

Abdulkareem, Sulaiman and Khan, Ahsan Ali and Konneh, Mohamed (2018) Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining. Engineering and Applied Science Research, 45 (1). pp. 17-22. ISSN 2539-6161 E-ISSN 2539-6218

Abdullah, Abu and Hassan, Norita and Hassan, Noor Azlina and Sulong, Abu Bakar and Mas'Ood, Najlaa Nazihah (2018) Preparation of SS316L MIM feedstock with biopolymer as a binder. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Abdullah, Aida Ashikin and Hassan, Norita and Hassan, Noor Azlina (2018) Influence of epoxidized palm oil on polyhydroxyalkanoates tensile properties. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 556-559. ISSN 2581-4311

Abdullah Sidek, 'Atiah and Suffian, S A and Al Hazza, Muataz Hazza Faizi and H. M., Yusof (2018) Determining system boundaries on commercial broiler chicken production system using ISO 14040/14044 guideline: a case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Kuala Lumpur.

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 73-77. E-ISSN 0128-1852

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Herliansyah, Muhammad Kusumawan and Sopyan, Iis and Basirun, Wan Jefrey and Ladan, Magaji (2018) Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 32 (1). pp. 91-102. ISSN 0169-4243 E-ISSN 1568-5616

Adeleke, Sakiru Adekunle and Ramesh, Singh and Bushroa, Abdul Razak and Ching, Yern Chee and Sopyan, Iis and Maleque, Md. Abdul and Krishnasamy, Sivakumar and Chandran, Hari and Misran, Halina and Ubenthiran, Sutharsini (2018) The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2). pp. 1802-1811. ISSN 0272-8842

Adesta, Erry Yulian Triblas and Hamidon, R. and Riza, Muhammad and Alrashidi, R. F.F.A. (2018) Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology, 7 (37). pp. 156-159. ISSN 2227-524X

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung and Agusman, Delvis (2018) Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adnan, Ammar and H., Hanafi and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek and Ani, Mohd Hanafi (2018) Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)). pp. 451-454. ISSN ISSN 1013-5316

Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2018) Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology, 13 (Issue Special Issue on WRICET (2016)). pp. 86-93. ISSN 1823-4690

Ahmad, Zuraida and Tajuddin, Maisarah and Salim, Nurul Farhana Fatin and Halim, Zahurin (2018) Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X E-ISSN 2289-7860

Ahmad, Zuraida and Y., Insyirah and Tajuddin, Maisarah and Halim, Zahurin (2018) Influence of fiber treatment on dimensional stabilities of rattan waste composite boards. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.

Ahmad, Zuraida and Yahaya, Insyirah and Tajuddin, Maisarah (2018) Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 403-409. ISSN 2581-4311

Ahmad A. Shahrim, Nur’Aishah and Sarifuddin, Norshahida and Ismail, Hanafi (2018) Extraction and characterization of starch from mango seeds. In: Regional Conference on Materials and ASEAN Microscopy Conference 2017, RCM and AMC 2017, 12 - 13 December 2017, Penang; Malaysia.

Ahmad Azhar, Ahmad Zahirani (2018) Konsep perlaksanaan pengasingan kolej kediaman pelajar di Universiti Islam Antarabangsa Malaysia mengikut fakulti. In: Konvensyen Kepengetuaan & Felo Penghuni Kolej-kolej Kediaman Peringkat Kebangsaan 2018, 22nd-23rd July 2018, Bangi. Selangor.

Ahmad Azhar, Ahmad Zahirani and Kahlib, Nor Amyra Zulianey and Manshor, Hanisah and Wee, Sing Yeo and Mohd Ali, Afifah and Rejab, Nik Akmar and Ahmad, Zainal Arifin (2018) Effect of single walled carbon nanotube addition to the physical properties of monolithic alumina. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 585-590. E-ISSN 2581-4311

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2018) The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5). pp. 892-898. ISSN 1394-2506

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdullah Sidek, 'Atiah and Endut, N A (2018) A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Elbishari, E M Y and Ismail, Md Yusof and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2018) Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Endut, Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur A B and Ali, Mohammad Yeakub (2018) Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-6.

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2018) Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Amalina (2018) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Zainal, Nur Izzati Zainal and Rodzi, Mohd Zuhaili Mohd (2018) Development of FRID based 2d localization simulation for autonomous guided vehicle tracking in indoor environment. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 496-507. ISSN 0976-6340 E-ISSN 0976-6359

Al Mamun, Abdullah and AlSaadi, Mohammed A. and Alam, Md Zahangir and Sopyan, Iis (2018) Carbon nanotubes grown on oil palm shell powdered activated carbon as less hazardous and cheap substrate. Applied Nanoscience (Switzerland), 8 (7). pp. 1767-1779. ISSN 2190-5509 E-ISSN 2190-5517

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Alrashidi, Abdullah E. M. F. and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali (2018) The scenario of supply chain management in Kuwait food industry. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 162-170. ISSN 0128-1852

Ammar, Adnan and H., Ismail and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Mohd Hanafi, Ani and Abdul Hamid, Abd. Malek (2018) Relationship between merging lane length and motorcyclist’s head check behavior during merging in expressway. Sci.Int.(Lahore), 30 (3). pp. 461-466. ISSN 1013-5316

Ani, Mohd Hanafi and Helmi, F and Herman, Sukreen Hana and Syed Abu Bakar, Syed Noh (2018) Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ani, Mohd Hanafi and Kamarudin, Mohd Syahidan and Ramlan, A H and Ismail, Edhuan and Sirat, Mohd Shukri and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam (2018) A critical review on the contributions of chemical and physical factors toward the nucleation and growth of large-area graphene. Journal of Materials Science, 53 (10). pp. 7095-7111. ISSN 0022-2461 E-ISSN 1573-4803

Ani, Mohd Hanafi and Zaharudin, M Z and ., Suryanto and Purwanto, Hadi and Din, M.F.M. and ., T. Kurniawan (2018) Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI), 5th-6th July 2018, Bangkok, Thailand.

Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah (2018) Physical and functional properties of durian skin fiber biocomposite films filled with natural antimicrobial agents. BioResources, 13 (4). pp. 7255-7269. ISSN 1930-2126

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Arifutzzaman, A. K. H. A. Ma and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Alam, Md. Zahangir (2018) Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids. International Journal of Applied Engineering Research, 13 (10). pp. 7477-7487. ISSN 0973-4562

Azmi, H. and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily (2018) Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelekangan (Fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar]. Sains Malaysiana, 47 (4). pp. 829-838. ISSN 0126-6039

Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Bagum, Mst. Nasima and Konneh, Mohamed and Amin, A. K. M. Nurul (2018) Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3437-3447. ISSN 0268-3768

Berahim, A N and Zaharudin, M Z and Ani, Mohd Hanafi and Arifin, S K (2018) Effect of dissolved hydrogen on Schottky barrier height of Fe-Cr alloy heterojunction. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Bourini, Islam Faisal and Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem (2018) Investigation of effect of machine layout on productivity and utilization level: what if simulation approach. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 32-40.

Buys, Yose Fachmi and Anuar, Hazleen (2018) Morphology and electrical properties of polylactide / natural rubber blend filled with conductive nano carbon. Research Report. UNSPECIFIED. (Unpublished)

Buys, Yose Fachmi and Anuar, Hazleen (2018) Study on miscibility and degradation behavior of polylactic acid / thermoplastic polyurethane blends. Project Report. UNSPECIFIED. (Unpublished)

Buys, Yose Fachmi and Aznan, Aisyah Nur Atiqah and Anuar, Hazleen (2018) Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Buys, Yose Fachmi and Mawardi, Munirah Afiqah and Anuar, Hazleen (2018) Selective localization of multi-walled CNT in polylactic acid /thermoplastic polyurethane blends and its effect on mechanical properties. Current Nanomaterials, 2 (2). pp. 84-89. ISSN 2405-4615 E-ISSN 2405-4623

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) An analytical technique to obtain higher-order approximate periods for the nonlinear oscillator. IIUM Engineering Journal, 19 (2). pp. 182-191. ISSN 1511-788X E-ISSN 2289-7860

Endut, N A and Al Hazza, Muataz Hazza Faizi and Abdullah Sidek, 'Atiah and Adesta, Erry Yulian Triblas and Ibrahim, N A (2018) Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Fargana, A and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2018) Equiconvergence in summation associated with elliptic polynomial. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17), 8th-9th Aug. 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Fargana, A. and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2018) Optimization of the regularization of the solution of the plate vibration problem. International Journal of Applied Engineering Research, 13 (8). pp. 6364-6368. E-ISSN 0973-4562

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Herman, Sukreen Hana and Mohamed, Mohd Ambri (2018) Dilute electrodeposition of TiO2 and ZnO thin film memristors on Cu substrate. In: 6th International Conference on Electronic Devices, Systems and Applications 2017 (ICEDSA 2017), 8-9 August 2017, Kuching, Sarawak, Malaysia.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Antiwashout behavior of calcium phosphate cement incorporated with poly(ethylene glycol). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Mujibur (2018) Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement. IIUM Engineering Journal, 19 (2). pp. 192-202. ISSN 1511-788X E-ISSN 2289-7860

Hadi, Purwanto and Mohd Zakiyuddin, Amrina and Alya Naili, Rozhan and Mohamad, Ainun Syahirah and Hamzah, Mohd. Salleh (2018) Effect of charcoal derived from oil palm empty fruit bunch on the sinter characteristics of low grade iron ore. Journal of Cleaner Prodcution, 200. pp. 954-959. ISSN 0959-6526

Hadi, Purwanto and Rozhan, Alya Naili and Hamzah, Mohd. Salleh (2018) Innovative process to enrich carbon content of EFB-derived biochar as an alternative energy source in ironmaking. Advances in Materials Science and Engineering, 2018. pp. 1-7. ISSN 1687-8434 E-ISSN 1687-8442

Haider I., Farag and -, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2018) A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Haiyam, F. N. and Hilmy, Irfan and Sulaeman, Erwin and Mohamed Ariff, Tasnim Firdaus and Adesta, Erry Yulian Triblas (2018) Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2018) Thermal conductivity of water based magnetite ferrofluids at different temperature for heat transfer applications. In: International Conference on Sustainable Materials, ICoSM 2018, 16th Apr. 2018, Bangkok, Thailand.

Hanash, Ebrahim and Ali, Mohammad Yeakub (2018) Experimental study of electrical discharge drilling of stainless steel UNS S30400. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Harun, Azmi and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily and Abdul Rahim, Yuzairi (2018) Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments. In: 3rd International Conference on Science, Technology and Interdisciplinary Research (IC-STAR 2017), 18th-20th Sept. 2017, Bandar Lampung, Indonesia.

Hassan, Norita (2018) Study on the novel binder based biodegradable polyhyroxyalkanoates (PHA) for metal injection moulding application. Research Report. UNSPECIFIED. (Unpublished)

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) Analytical approximations for the oscillators with anti-symmetric quadratic nonlinearity. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Ismail, Azkar Zahidi and Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Mat Hasan, Mohd Raziff and Muhamad Khairussaleh, Nor Khairusshima and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of headscarf (hijab, tudung) designs. Human Factors and Ergonomics Journal, 3 (1). pp. 34-38. E-ISSN 2590-3750

J. N., Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi (2018) Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Jamal, Nur Ayuni and Othman, Maizatulnisa and Anuar, Hazleen and Yusof, Farazila and Ahmad Nor, Yusilawati and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 460-466. ISSN 0933-5137

Jamal, Nur Ayuni Jamal and Yusof, Farazila and Ahmad Nor, Yusilawati and Othman, Maizatulnisa and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) The role of tin and magnesium in assisting liquid phase sintering of aluminum (Al). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Kahlib, Nor Amyra Zulianey and Wan Mazlan, Wan Amirah and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 378-383. ISSN 2581-4311

Kays, H. M.Emrul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Varela, Leonilde and Putnik, Göran and Machado, Jose (2018) A collaborative multiplicative Holt-Winters forecasting approach with dynamic fuzzy-level component. Applied Sciences (Switzerland), 8 (4). pp. 1-28. ISSN 2076-3417

Khairi, M. Azim and Abd Rahman, Mohamed (2018) Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and UNSPECIFIED (2018) Quality management system and sustainability: a Malaysian perspective. International Journal of Services and Operations Management, 30 (3). pp. 286-317. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Daud, Mohd Radzi Che (2018) A conceptual framework linking LM, TQM, QMS, and EMS practices with the SP: assessment of responses from managers of some Malaysian industries. International Journal Manufacturing Technology and Management, 32 (3). pp. 191-213. ISSN 1368-2148 E-ISSN 1741-5195

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N.Mustafizul and Che Daud, Mohd Radzi (2018) Soft total quality management and lean manufacturing initiatives: model development through structural equation modelling. International Journal of Productivity and Quality, 23 (1). pp. 1-30. ISSN 1746-6474 E-ISSN 1746-6482

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Norhamzan, Norainnatul Husna (2018) A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel. International Journal of Applied Engineering Research, 13 (5). pp. 2541-2544. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Liana, N. A. and Amsyar, N. and Hilmy, Irfan and Yusof, M. D. (2018) Lean energy analysis of CNC lathe. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

M. A., Siti Nur E’zzati and Anuar, Hazleen and Y.F., Buys and A. R., Siti Munirah Salimah and Ali, Fathilah and M. R., Manshor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Maleque, Md. Abdul (2018) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 1-7. (In Press)

Maleque, Md. Abdul (2018) TIG torch technique for hard face surfacing. In: TNBR Remaco presentation, 19 April 2018, Selangor. (Unpublished)

Maleque, Md. Abdul (2018) Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018), 4th-6th Jan. 2018, Cambridge, United Kingdom. (Unpublished)

Maleque, Md. Abdul and A.R., Nur Farina and Paijan, Lailatul Harina and Abdullah, M. Azwan (2018) Lighter weight and energy efficient eco-siC composite for motorbike brake disc application. In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018, 10-12 May 2018, KLCC. (Unpublished)

Maleque, Md. Abdul and Afiq, Muhammad (2018) Melting of SiC powders preplaced duplex stainless steel using TIG welding. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Lailatul, P.H. and Fathaen,, A. A. and Norinsan, K. and Haider, Julfikar (2018) Nitride alloy layer formation of duplex stainless steel using nitriding process. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdullah, Muhammad Azwan and Jamal, Nur Ayuni Jamal (2018) A new approach for composite coating development on metallic materials. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Bello, Kamillo and ,, Mohd Azwan and Rahman, Md Mustafizur (2018) Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17. pp. 15-28. E-ISSN 2289-7232

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Shaha, Sugrib Kumar and Razali, Nurul Nadirah (2018) Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-7. ISBN 978-0-12-803581-8 (In Press)

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) A secondary, coplanar design Ni/MCM-41/Zn microbattery. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) The viability of MCM-41 as separator in secondary alkaline cells. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohamad, Souad A. and Ahmed, Nafees and Othman, Raihan and Othman, Maizatulnisa (2018) Optimization of TiO2 thin film thickness for dye sensitized solar cell applications. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abd. Malek and Syed Shaharuddin, Sharifah Imihezri (2018) Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19-20 September 2018, Kuala Lumpur, Malaysia.

Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina and Zulkifli, Mohd Fadzil and Mohamed, Mohd Ambri and Ani, Mohd Hanafi (2018) Carbon nanomaterials derived from Malaysia’s highway road asphalt waste as electrode for supercapacitor. Journal of Materials and Environmental Sciences, 9 (7). pp. 2164-2168. ISSN 2028-2508

Mohd Ali, Afifah and Hamidon, N. E. and Zaki, N. K.M. and Mokhtar, Suhaily and Ahmad Azhar, Ahmad Zahirani and Bahar, Rubina. and Ahmad, Zainal Arifin Azhar (2018) The effect of cutting parameters on the performance of ZTA-MgO cutting tool. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8- 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohd Ali, Afifah and Janal, Nurul Nabihah and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Bahar, Rubina and Ahmad, Zainal Arifin (2018) The relationship of cutting chip type, length and thickness to wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) cutting tool. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 452-457. ISSN 2581-4311

Mohd Apandi, Siti Nur E'zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah (2018) Environmental degradation of durian skin nanofibre biocomposite. IIUM Engineering Journal, 19 (1). pp. 223-236. ISSN 1511-788X E-ISSN 2289-7860

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah and Buys, Yose Fachmi and Othman, Rashidi (2018) Effect of supercritical carbon dioxide on tensile Properties of Durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, Special issue. pp. 197-202. E-ISSN 2581-4311

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Buys, Yose Fachmi and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshor, Mohd Romainor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Mohd Daud, Farah Diana and Kahlib, Nor Amyra Zulianey and Mohd Rafi, Muhammad Husaini and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue. pp. 63-67. ISSN 2581-4311

Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani (2018) Development of modified ceramic membranes by silica dip-coating method for removal of co2 from biogas plant. Project Report. UNSPECIFIED. (Unpublished)

Mohd Noor, Najihah and Hashim, Yumi Zuhanis Has-Yun and Ahmad Nor, Yusilawati and Tshai, Albert and Wan Salim, Wan Wardatul Amani and Sopyan, Iis (2018) Electrospun Poly (Vinyl Alcohol) (PVA) fiber mats as carriers for extract from agarwood branch. In: International Conference on Halal Innovation in Products and Services 2018 (i-CHIPS 2018), 13th-14th July 2018, Haat Yai, Songkhla, Thailand.

Mohd Zaki, Hafizah Hanim and Bahrudin, Nik Amnani and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Effect of different reducing agents on phase formation and transformation behaviour of Ni-Ti shape memory alloy. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Mohd Zaki, Hafizah Hanim and Mohamad Sholihin, Mohamad Hanis and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1). pp. 464-470. ISSN 2581-4311 E-ISSN 2581-4311

Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek (2018) Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task? Human Factors and Ergonomics Journal, 3 (1). pp. 26-33. E-ISSN 2590-3750

Mohs Apandi, Siti Nur 'Ezzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah (2018) Effect of coupling agent on durian skin fibre nanocomposite reinforced polypropylene. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Gombak, Kuala Lumpur.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi and Mohd Ali, Afifah and Muhamad Khairussaleh, Nor Khairusshima (2018) Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills. In: 2018 6th International Conference on Nano and Materials Science (ICNMS 2018), 15th-17th January 2018, Lakeland; United States.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Mohd Ali, Afifah and Mohd Khairussaleh, Nor Khairusshima (2018) Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima and Zakwan, Muhammad Hafiz and Mokhtar, Suhaily and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri (2018) The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.

Nor Hairin, Assayidatul Laila and Romainor, M. N. and Othman, Raihan and Mohd Daud, Farah Diana (2018) Electrodeposition of zinc antimony alloy thermoelectric materials. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Othman, Maizatulnisa and N., Hasmida and Halim, Zahurin and Jamal, Nur Ayuni and Khalid, Khalisanni and Zakaria, Noor Amalina and Al-Bat’hi, Souad A. M. (2018) Mechanical properties of gracilaria lichenoides reinforced bioplastic film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Othman, Maizatulnisa and Yusup, Afiqah Athirah and Zakaria, Nazarudin and Khalid, Khalisanni (2018) Bio-polymer chitosan and corn starch with extract of hibiscus rosa-sinensis (hibiscus) as PH indicator for visually-smart food packaging. AIP Conference Proceedings, 1985. 050004-1. ISSN 0094-243X E-ISSN 1551-7616

Paijan, Lailatul Harina and Maleque, Md. Abdul (2018) Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18. pp. 136-148. E-ISSN 2289-7232

Pang, Ming Meng and Koay, Seong Chun and Low, Jiun Hor and Buys, Yose Fachmi and Tshai, Kim Yeow (2018) Study on the plasticiser type for biobased microcrystalline cellulose filled polylactic acid composite. In: 5th International Conference on Process Engineering and Advanced Materials, ICPEAM 2018, 13th-14th August 2018, Kuala Lumpur.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, A. S. and Zakiyuddin, A. (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000°C - 1200°C. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Mohamad, Ainun Shaheera and Mohd Zakiyuddin, Amrina and Rozhan, Alya Naili (2018) Effect of EFB content on reducibility of low grade iron ore composite at 1000oC – 1200oC. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8- 9 August 2017, IIUM, Gombak, Kuala Lumpur.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Rozhan, Alya Naili and Mohamad, A.S. and Zakiyuddin, Ahmad (2018) Phase change of iron ore reduction process using EFB as reducing agent at 900-1200°C. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1-2 March 2018, Pekan, Pahang, Malaysia.

Purwanto, Hadi and Rozhan, Alya Naili and Mohamad, A. S. and Zakiyuddin, Ahmad (2018) Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 -2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.

Purwanto, Hadi and Rozhan, Alya Naili and Zakiyuddin, Ahmad and Mohamad, A. S. (2018) Effect of temperature on porosity of iron ore sinter with biochar derived from EFB. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8-9 August 2017, Faculty of Engineering, International Islamic University Malaysia (IIUM) Kuala Lumpur.

Rahat, Arifutzzaman and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Mohammad, Zahangir Alam (2018) Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids. International Journal of Applied Engineering Research, 13 (7). pp. 4871-4877. ISSN 0973-4562 E-ISSN 0973-9769

Rahman, Md Mujibur and Rahman, H. Y. and Awang, Mohd Anuar and Sopyan, Iis (2018) Effects of sintering schedule to the characteristics of FeCrAl powder compacts formed at elevated temperature. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Rahman, Md. Mujibur and Ismail, M. A. and Sopyan, Iis and Rahman, H. Y. (2018) Effects of forming temperature and sintering rate to the final properties of FeCuAl powder compacts formed through uniaxial die compaction process. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rahman, Mohammed Ataur and Rahman, Shaik Mizanur and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Power optimisation of electric coaster. International Journal of Electric and Hybrid Vehicles, 10 (1). pp. 82-94. ISSN 1751-4088 E-ISSN 1751-4096

Raja Seman, Raja Noor Amalina and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2018) Graphene/transition metal dichalcogenides hybrid supercapacitor electrode: status, challenges, and perspectives. Nanotechnology, 29 (50). ISSN 0957-4484 E-ISSN 1361-6528

Ramesh, Singh and Zulkifli, Nurin Wahidah and Tan, Chou Yong and Wong, Yinhow and Tarlochan, Faris and Ramesh, S. and Teng, W. D. and Sopyan, Lis and Bang, Le Thi and Sarhan, Ahmed A.D. (2018) Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceramics International, 44 (8). pp. 8922-8927. ISSN 0272-8842

Rashid, A. A. and Sidek, Atiah Abdullah and Suffian, S. A. and Che Daud, Mohd Radzi (2018) Environmental management competitive pressure effect on SME environmental innovation activities: A green supply chain perspective. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

Razali, Nurul Nabilah and Sopyan, Lis (2018) Incorporation of poly(Vinyl alcohol) for the improved properties of hydrothermal derived calcium phosphate cements. Indonesian Journal of Chemistry, 18 (2). pp. 354-361. ISSN 1411-9420

Razali, Nurul Nadirah and Sukardi, Mohd Amirul and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur (2018) The effects of excess calcium on the handling and mechanical properties of hydrothermal derived calcium phosphate bone cement. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology, 7 (4014). pp. 339-342. ISSN 2227-524X

Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018), 14th-15yh November 2018, Melaka. (Unpublished)

Samat, Noorasikin and Motsidi, Siti Nor Rasyidah and Lazim, Nurul Hakimah (2018) Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Samat, Noorasikin and Motsidi, Siti Nor Rasyidah and Mohd Lazim, Nurul Hakimah (2018) Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites. IOP Conference Series: Materials Science and Engineering, 290. pp. 1-6. ISSN 1757-8981 E-ISSN 1757-899X

Sarifuddin, Norshahida and Ahmad A. Shahrim, Nur’Aishah and Azman, K.S (2018) Effect of oregano essential on the properties of mango kernel starch films. In: International Conference on Advanced Manufacturing and Industry Applications, ICAMIA 2018, 15th-17th August 2018, Kuching, Sarawak.

Sarifuddin, Norshahida and Shaari, Mohammad Anuar Zaki and Ahmad Shahrim, Aishah and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2018) Effect of banana peel fiber as reinforcement in low density polyethylene/durian seed starch blends. International Journal of Current Research in Science & Technology, Special issue. pp. 191-196. E-ISSN 2581-4311

Sarifuddin, Norshahida and Shahrim, N.A. and Rani, N. N.S.A. and Zaki, H. H.M. and Ahmad Azhar, Ahmad Zahirani (2018) Preparation and characterization of jackfruit seed starch/poly (vinyl alcohol) (PVA) blend film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Saud FEMD Alazemi, Saud and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2018) Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture, 3 (4). pp. 190-199. E-ISSN 0128-1852

Shahlan, M. Z. and Sidek, Ayu Aszliana and Suffian, S A and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi (2018) An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Siddique, Istiaq Jamil and Bahar, R. and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994 E-ISSN 1944-3986

Sidek, Shahrul Naim and Roslan, Muhammad Rozaidi and Sidek, Sabrilhakim and Mohd Khalid, Mohd Shukry (2018) Thumb-tip force prediction based on hill’s muscle model using electromyogram and ultrasound signal. International Journal of Computational Intelligence Systems, 11 (1). pp. 238-247. ISSN 1875-6891 E-ISSN 1875-6883

Suffian, S. A. and Abdullah Sidek, 'Atiah and Md. Yusof, Hazlina and Al Hazza, Muataz Hazza Faizi (2018) Inventory data on commercial broiler chicken production system using life cycle assessment approach: A case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Sukindar, Nor Aiman and Ab Tahir, Aliff (2018) Risk assessment on plan layout for project mechanical workshop in Politeknik Kuching Sarawak. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Sulaiman, Mohd Hafis (2018) Subject Matter Experts Challenge for real-world industrial solutions: Warm forging and stamping to make cost-effective motorcycle sprockets. Other. UNSPECIFIED.

Sulaiman, Mohd Hafis and Christiansen, P and Bay, N (2018) A study of anti-seizure tool coatings of ironing of stainless steel. Jurnal Tribologi, 17. pp. 1-14. E-ISSN 2289-7232

Sulaiman, Mohd Hafis and Christiansen, P. and Bay, N. (2018) Measurement of compressibility by means of pressure-bulk modulus relationship for low-to-high viscosity oils. In: Asia International Conference on Tribology 2018, Kuching, Sarawak.

Syed Shaharuddin, Sharifah Imihezri and Adnan, Muhammad Danial Afiq and Muhamad Khairussaleh, Nor Khairusshima and Mohd Shaffiar, Norhashimah and Buys, Yose Fachmi (2018) Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Unuh., M. H. and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati and Ismail, Mohamad Amiruddin (2018) Vibration isolation analysis of new design OEM damper for malaysia vehicle suspension system featuring MR fluid. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza (2018) Product development and cost analysis of fabricating the prototype of roller clamp in intravenous (I.V) tubing medical devices using fused deposition modeling (FDM) technology. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Yusof, M. Q.M. and Harun, H. N.S.B. and Bahar, Rubina (2018) Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Zamzuri, Ahmad Syahmi and Ayob, Nur Idayu and Abdullah, Yusof and Hasbullah, Nurul Fadzlin (2018) Effect of irradiation upon single layer graphene on SiO 2 /Si substrate using Electron Beam Irradiation (EBI). In: 4th Advanced Materials Conference (AMC) 2018, 27th-28th Nov. 2018, Hilton Kuching, Sarawak. (Unpublished)

Üstünyagiz, Esmeray and Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Nielsen, Chris Valentin and Bay, Niels (2018) A study on DLC tool coating for deep drawing and ironing of stainless steel. Key Engineering Materials, 767. pp. 181-188. ISSN 1013-9826