Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2021

Article

Aabid, Abdul and Abdul Raheman, MD and Ibrahim, Yasser and Anjum, Asraar and Hrairi, Meftah and Parveez, Bisma and Parveen, Nagma and Zayan, Jalal Mohammed (2021) A systematic review of piezoelectric materials and energy harvesters for industrial applications. Sensors, 21 (12). pp. 1-27. ISSN 1424-8220

Aabid, Abdul and Khairulaman, Liyana Nabilah Binti and Khan, Sher Afghan (2021) Analysis of flows and prediction of CH10 airfoil for unmanned arial vehicle wing design. Advances in Aircraft and Spacecraft Science, 8 (2). pp. 87-109. ISSN 2287-528X E-ISSN 2287-5271

Aabid, Abdul and Khan, Sher Afghan (2021) Studies on flows development in a suddenly expanded circular duct at supersonic mach numbers. International Journal of Heat and Technology, 39 (1). pp. 185-194. ISSN 0392-8764

Aabid, Abdul and Khan, Sher Afghan and Afzal, Asif and Baig, Muneer (2021) Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flow control using experimental and optimization methods. Meccanica, 56 (11). pp. 1-26. ISSN 0025-6455 E-ISSN 1572-9648

Aabid, Abdul and Khan, Sher Afghan and Baig, Muneer (2021) A critical review of supersonic flow control for high-speed applications. Applied Sciences, 11 (6899). pp. 1-26. ISSN 2076-3417

Aabid, Abdul and Mohd Zakuanl, Muhammad Amir Mirza and Khan, Sher Afghan and Ibrahim, Yasser E. (2021) Structural analysis of three-dimensional wings using finite element method. Aerospace Systems, 4 (3). pp. 1-22. ISSN 2523-3947 E-ISSN 2523-3955

Aabid, Abdul and Parveez, Bisma and Abdul Raheman, MD and Ibrahim, Yasser and Anjum, Asraar and Hrairi, Meftah and Parveen, Nagma and Zayan, Jalal Mohammed (2021) A review of piezoelectric material-based structural control and health monitoring techniques for engineering structures: challenges and opportunities. Actuators, 10 (5). pp. 1-26. ISSN 2076-0825

Aabid, Abdul and Shabbir, Omar and Khan, Sher Afghan (2021) History and analysis of knowledge in Islamization of aerospace engineering. Karachi Islamicus, 1 (2). pp. 42-52. ISSN 2790-6558 E-ISSN 2790-654X

Aamir, Shahzad and Arslan, Ahmed and Moinuddin, Mohammed Quazi and Muhammad, Jamshaid and Ashrafur Rahman, S.M and Masjuki, Hassan and Hafiz Muhammad Asif, Javed (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (1440). pp. 1-36. ISSN 1996-1073

Ab Rahim, Abdul Hakim and Ramli, Nabilah and Nordin, Anis Nurashikin and Abd Wahab, Mohd Firdaus (2021) Supercapacitor performance with activated carbon and graphene nanoplatelets composite electrodes, and insights from the equivalent circuit model. Carbon Trends, 5. pp. 1-13. ISSN 2667-0569

Abbas, Muhammad Mujtaba and Kalam, Md Abul and Masjuki, Haji Hassan and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar Ahmed and V., Dhana Raju and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481

Abdul, Abid and Hrairi, Meftah and Abuzaid, Ahmed and Mohamed Ali, Jaffar Syed (2021) Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch. Thin Walled Structures, 158. pp. 1-15. ISSN 0263-8231

Abdullah, Muhammad and Rossiter, John Anthony and Abdul Ghaffar, Alia Farhana (2021) Improved constraint handling approach for predictive functional control using an implied closed-loop prediction. IIUM Engineering Journal, 22 (1). pp. 323-338. ISSN 1511-788X E-ISSN 2289-7860

Abdullah, Nur Azam (2021) Energy-harvesting via wind interaction: a sustainable flight is a dream for the development of modern aircraft. @green, 1 (8). pp. 20-21. ISSN 2756-7818

Abdullah, Nur Azam (2021) Segerakan penggantian Hawk tingkat keupayaan aset TUDM. Berita Harian, 29 November 2021. p. 12.

Abdullah, Nur Azam (2021) Transfer of technology can help us produce high-skilled workers. New Straits Times, 2 December 2021. p. 13.

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Penerokaan angkasa lepas buka potensi teknologi aras tinggi. Berita Harian: Rencana, 24 September 2021. p. 10.

Abdullah, Nur Azam and Azami, Muhammad Hanafi (2021) Potensi industri getah dalam pembangunan teknologi aeroangkasa. Berita Harian, 19 April 2021. p. 12.

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Abdullah, Nur Azam and Joha, Jufitri (2021) Bijak, beradab guna teknologi IR4.0 jalani pendidikan dalam talian. Berita Harian, 25th January 2021.

Abdullah, Nur Azam and Mohamed Afandi, Mohamed Azizul (2021) Selami sains aerodinamik dalam sukan berbasikal. Berita Harian, 16 February 2021. p. 11.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor Iqram (2021) Numerical modelling of bird strike on aerospace structures by means of coupling FE-SPH. International Journal of Integrated Engineering, 13 (7). pp. 185-193. ISSN 2229-838X E-ISSN 2600-7916

Afzal, Asif and Alshahrani, Saad and Alrobaian, Abdulrahman and Buradi, Abdulrajak and Khan, Sher Afghan (2021) Power plant energy predictions based on thermal factors using ridge and support vector regressor algorithms. Energies, 14 (7254). pp. 1-22. ISSN 1996-1073

Afzal, Asif and Bhutto, Javed Khan and Alrobaian, Abdulrahman and Kaladgi, Abdul Razak and Khan, Sher Afghan (2021) Modeling and computational experiment to obtain optimized neural network for battery thermal management data. Energies, 14 (7370). pp. 1-19. ISSN 1996-1073

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2021) Thermal resistance and pressure drop minimization for a micro-gap heat sink with internal micro-fins by parametric optimization of operating conditions. CFD Letters, 13 (12). pp. 100-112. ISSN 2180-1363

Akhtar, Mohammad Nishat and Khan Mohammed, Muneer and Khan, Sher Afghan and Afzal, Asif and Subbiah, Ram and Sheikh, Nazeer Ahmed and Husain, Murtuja and Butt, Mohammad Mursaleen and Othman, Abdul Rahim and Elmi, Abu Bakar (2021) Determination of non-recrystallization temperature for niobium microalloyed steel. Materials, 14 (10). pp. 1-14. ISSN 1996-1944

Al Mahmud, Suaib and Ismail, Ahmad Faris (2021) Multiphase CFD investigation on convective heat transfer enhancement for turbulent flow of water-Al2O3Nanofluid. CFD Letters, 13 (10). pp. 11-24. ISSN 2180-1363

Aladdin, Mohd Farid and Abdul Jalil, Nawal Aswan and Guan, Ng Yee and Md Rezali, Khairil Anas (2021) Perturbation effect of noise on overall feeling of discomfort from vertical whole-body vibration in vibro-acoustic environment. International Journal of Industrial Ergonomics, 83. pp. 1-13. ISSN 0169-8141 E-ISSN 1872-8219

Altabaa, Homam and Faris, Waleed Fekry and Hamawiya, Adham (2021) A review of Kahlil Gibran’s major creative works. Journal of Islam in Asia, 18 (3). pp. 1-23. E-ISSN 2289-8077 (In Press)

Asrar, Waqar and Aldheeb, Mohammad and Zohary, Aideal Czar (2021) Numerical investigation on the pressure drag of some low-speed airfoils for UAV application. CFD Letters, 13 (2). pp. 29-48. ISSN 2180-1363

Azami, Muhammad Hanafi (2021) Jasad di bumi, minda di angkasa. e-estidotmy, 14 December 2021. pp. 1-7.

Bahari, Che Amnah and Faris, Waleed Fekri Faris and Mohamad, Mardiana (2021) Jalāl al-Dīn al-Rūmī’s concept of Ibtilā’: its application to stress management. Al-Itqan, 5 (1). pp. 5-18. E-ISSN 2600-8432

Fadhil, Muhammad and Prayoga, Aditya and Eriawan, Andi and Sulaeman, Erwin and Legowo, Ari (2021) Aerodynamic pressure mapping technique from CFD to FEM model of N219 winglet. CFD Letters, 13 (12). pp. 90-99. ISSN 2180-1363

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Azan M. (2021) Experimental study on the mean flow characteristics of a supersonic multiple jet configuration. Journal of Aerospace Science & Technology, 108 (2021). pp. 1-13. ISSN 1270-9638 E-ISSN 1626-3219

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental investigation of the effect of cross wire on the flow field of elliptic jet. International Journal of Heat and Fluid Flow, 90 (108834). pp. 1-12. ISSN 0142-727X

Fazal, M. A. and Sundus, F. and Masjuki, Haji Hassan and Rubaiee, Saeed and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1-8. ISSN 2213-1388

Ganat, Tarek A. and Hrairi, Meftah and Gholami, Raoof and Abouargub, Taha and Motaei, Eghbal (2021) Experimental investigation of oil-water two-phase flow in horizontal, inclined, and vertical large-diameter pipes: determination of flow patterns, holdup, and pressure drop. SPE Production & Operations, 36 (4). pp. 946-961. ISSN 1930-1855

Hasnul, Muhammad Harith and Mohd Zulkifli, Nurin Wahidah and Masjuki, H. H. and Zulkifli, Syahir Amzar and Mohd Yusoff, Mohd Nur Ashraf and Zakaria, Muhammad Zulfattah (2021) Synergistic behavior of graphene and ionic liquid as bio-based lubricant additive. Lubricants, 9 (5). pp. 1-15. ISSN 2075-4442

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Sulaeman, Erwin (2021) Laminar separation bubble and flow topology of NACA 0015 at low reynolds number. CFD Letters, 13 (10). pp. 36-51. ISSN 2180-1363

Hoda, Asif and Rahman, Mohammad Tariqur and Asrar, Waqar and Khan, Sher Afghan (2021) A comparative study of natural gas and biogas combustion in a swirling flow gas turbine combustor. Combustion Science and Technology, 193 (4). pp. 1-29. ISSN 0010-2202 E-ISSN 1563-521X

Idris, Sulbaqiah and Ahmad, Salmiah and Embong, Abd Halim and Altalmas, Tareq, M. (2021) The classification of actual pronunciation of Quranic alphabets for non-Arab speaker. PERINTIS E-Journal, 11 (1). pp. 70-83. E-ISSN 2232-0725

Islam, Maidul and Abdul Ghaffar, Alia Farhana and Sulaeman, Erwin and Ahsan, Md Manjurul and Kouzani, Abbas Z. and Mahmud, M.A. Parvez (2021) Performance analysis of PI and DMRAC algorithm in Buck-Boost Converter for voltage tracking in electric vehicle using simulation. Electronics, 10 (20). pp. 1-12. E-ISSN 2079-9292

Ismail, Atifatul Ismah and Khan, Sher Afghan and Rajendran, Parvathy and Sulaeman, Erwin (2021) Effect of cavities in suddenly expanded flow at supersonic mach number. CFD Letters, 13 (9). pp. 57-71. ISSN 2180-1363

Jaimon, Dennis Quadros and Khan, Sher Afghan and Aabid, Abdul and Alam, Mohammad Shohag and Baig, Muneer (2021) Machine learning applications in modelling and analysis of base pressure in suddenly, expanded flows. Aerospace, 8 (318). pp. 1-23. ISSN 2226-4310

Jaimon, Dennis Quadros and Khan, Sher Afghan and Hanumantharaya, R (2021) Influence of tab corner geometry on supersonic jets. Aircraft Engineering and Aerospace Technology, 92 (3). pp. 1-8. ISSN 0002-2667

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Qureshi, Akbar Ali (2021) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239. pp. 1-15. ISSN 0360-5442 E-ISSN 1873-6785

Kamarul Baharin, Nur Marissa and Sapardi, Mohd Azan Mohammed and Ab Razak, Nur Nadhirah and Abdul Hamid, Ahmad Hussein and Syed Abu Bakar, Syed Noh (2021) Study on Magnetohydrodynamic flow past two circular cylinders in staggered arrangement. CFD Letters, 13 (11). pp. 65-77. ISSN 2811 - 3969

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur and Ibrahim, Fatima Babiker Dafa-Alla (2021) The impact of film thickness on the properties of ZnO/PVA nanocomposite film. Materials Research Express, 8 (7). pp. 1-12. E-ISSN 2053-1591

Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Zubir, M. N. M. (2021) A review of recent advances in green nanofluids and their application in thermal systems. Chemical Engineering Journal, 429. pp. 1-18. ISSN 1385-8947

Kumar, Laveet Harish and Kazi, Salim Newaz and Masjuki, Haji Hassan and Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (Special Issue (SI)). pp. 1-19. ISSN 1359-4311 E-ISSN 1873-5606

Kumar, S. Senthil and K., Rajan and Vinayagam, Mohanavel and Manickam, Ravichandran and Rajendran, Parvathy and Rashedi, Ahmad and Sharma, Abhishek and Khan, Sher Afghan and Afzal, Asif (2021) Combustion, performance, and emission behaviors of biodiesel fueled diesel engine with the impact of Alumina Nanoparticle as an additive. Sustainability, 13 (12103). pp. 1-20. ISSN 2071-1050

Kumbar, Shobha Suresh and Jadhav, Dipak Ashok and Jarali, Chetan S. and Talange, Dhananjay B. and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Abdullah, Mohd. Zulkifly (2021) Enhancement in Cathodic Redox Reactions of Single-Chambered Microbial Fuel Cells with Castor Oil-Emitted Powder as Cathode Material. Materials, 14 (4454). pp. 1-13. ISSN 1996-1944

L., Harish Kumar and Kazi, Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Oon, Cheen Sean (2021) Experimental study on the effect of bio‑functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry. pp. 1-18. ISSN 1388-6150 E-ISSN 1588-2926

Mazaheri, Hoora and Ong, Hwai Chyuan and Amini, Zeynab and Masjuki, H. H. and Mofijur, M. and Su, Chia Hung and Badruddin, Irfan Anjum and Yunus Khan, T.M. (2021) An overview of biodiesel production via calcium oxide based catalysts: current state and perspective. Energies, 14 (13). pp. 1-23. ISSN 1996-1073

Meignanamoorthy, M and Ravichandran, Manickam and Mohanavel, Vinayagam and Afzal, Asif and Sathish, T and Alamri, Sagr and Khan, Sher Afghan and Saleel, Ahamad C. (2021) Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route. Materials, 14 (4315). pp. 1-24. ISSN 1996-1944

Memon, Mujtaba S and Haeng, Muk Cho and Masjuki, Haji Hassan and M.A, Kalam and Miiro, Farooq and M. Soudagar, Manzoore Elahi and Muhammad, Gul and Ahmed, Waqar and Afzal, Asif and Bashir, Shahid and V., Dhana Raju and Yaqoob, Haseeb and A.Z, Syahir (2021) Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blends. Energy Reports, 7. pp. 1162-1171. ISSN 2352-4847

Mohamed Ali, Jaffar Syed and Haron, Shahzatul Sakinah (2021) Stress analysis of composite aircraft wing using coupled fluid-structural analysis. CFD Letters, 13 (11). pp. 78-86. ISSN 2180-1363

Mohamed Ali, Jaffar Syed and W Embong, Wan Muhammad Hafizuddin and Aabid, Abdul and UNSPECIFIED (2021) Effect of cut-out shape on the stresses in aircraft wing ribs under aerodynamic load. CFD Letters, 13 (11). pp. 87-94. ISSN 2180-1363

Mohd Akhir, Nur atiqah and Othman, Maizatulnisa and Fachmi Buys, Yose and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-758X E-ISSN 2289-7860

Mohd Hilmi Tan, Mas Ira Syafila and Jamlos, Mohd Faizal and Omar, Ahmad Fairuz and Dzaharudin, Fatimah and Chalermwisutkul, Suramate and Akkaraekthalin, Prayoot (2021) Ganoderma boninense disease detection by Near-Infrared Spectroscopy Classification: a review. Sensors, 21 (9). pp. 1-21. ISSN 1424-8220

Mokashi, Imran and Afzal, Asif and Al-Mdallal, Qasem and Sundar, L. Syam and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Saleel, C Ahamed (2021) Effect of non-conjugate and conjugate condition on heat transfer from the battery pack. Alexandria Engineering Journal, 60. pp. 1-15. ISSN 1110-0168 (In Press)

Muhammad, Gul and Mohd Zulkifli, Nurin Wahidah and Md. Abul, Kalam and H.H., Masjuki and Abbas, Muhammad Mujtaba and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and M.N.A.M., Yusoff and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847

Mujtaba, M. A. and Kalam, Mohammad Abul and Masjuki, Haji Hassan and Soudagar, Manzoore Elahi M. and Khan, Haris Mehmood and Fayaz, Hussain and Farooq, Muhammad and Gul, Mustabshirha and Ahmed, Waqar and Ahmad, Mushatq and Munir, Mamoona and Yaqoob, Haseeb and Samuel, Olusegun David and Razzaq, Luqman (2021) Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60 (5). pp. 4537-4546. ISSN 1110-0168 E-ISSN 2090-2670

Munimathan, Arunkumar and Vinayagam, Mohanavel and Afzal, Asif and Thanikodi, Sathish and Manickam, Ravichandran and Khan, Sher Afghan and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Asif, Mohammad (2021) A study on performance and emission characteristics of diesel engine using Ricinus Communis (Castor Oil) Ethyl Esters. Energies, 14 (4320). pp. 1-19. ISSN 1996-1073

Norsahperi, Nor Mohd Haziq and Toha @ Tohara, Siti Fauziah and Ahmad, Salmiah and Mahmood, Iskandar Al Thani Bin (2021) Analysis and practical validation on a multi-linkage scissor platforms drive system for the satellite test facilities. International Journal of Heavy Vehicle Systems, 28 (1). pp. 1-14. ISSN 1744-232X E-ISSN 1741-5152

Othman, Maizatulnisa and Buys, Yose Fachmi and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterisation and production of Poly (Lactic/Acid)/poly (Ethylene Glycol) microfiber via melt drawn spinning process. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-788X E-ISSN 2289-7860

Pathan, Khizar A. and Khan, Sher Afghan and Shaikh, Aadil N. and Pathan, Arsalan A. and Khan, Shahnawaz A. (2021) An investigation of boat tail helmet to reduce drag. Advances in Aircraft and Spacecraft Science, 8 (3). pp. 239-250. ISSN 2287-528X E-ISSN 2287-5271

Quadros, Jaimon D. and Khan, Sher Afghan and Prashanth, T. (2021) Study of buzz phenomenon in suddenly expanded flow structure using experiments and visualization. Numerical Heat Transfer, Part B: Fundamentals An International Journal of Computation and Methodology. pp. 1-18. ISSN 1521-0626 E-ISSN 1040-7790

Quadros, Jaimon Dennis and Khan, Sher Afghan and T., Prashanth (2021) Analysis of parallel flow type internally cooled membrane-based liquid desiccant dehumidifier using a neural networks approach. Science and Technology for the Built Environment, 27 (11). pp. 1-19. ISSN 2374-4731 E-ISSN 2374-474X (In Press)

Rafeeq, Mohammed and Toha, Siti Fauziah and Ahmad, Salmiah and Mohd Yusof, Muhammad Syafiq and Mohd Razib, Mohd Asyraf and Shamsul Bahrin, Muhammad Ikmal Hakim (2021) Design and modeling of Klann mechanism-based paired four legged amphibious robot. IEEE Access, 9. pp. 1-10. E-ISSN 2169-3536 (In Press)

Rahman, Mohammed Ataur and Golam, Kibria (2021) Al-ZnO / CuO_Cfrp organic structural auxiliary energy storage system for electric vehicle. Journal of Solid State Technology, 28 (1 & 2). pp. 103-116. ISSN 0128-7389 E-ISSN 0127-9645

Rahman, Mohammed Ataur and Kaw, Myo Aung (2021) Development of solar supercapacitor by utilizing organic polymer and metal oxides for subsystem of EV. Materials Research Express IOP Publishing, 2021 (8). pp. 1-23. ISSN 2053-1591

Revichandran, Rajeanderan and Mohamed Ali, Jaffar Syed and Moumen Mohammed Mahmoud, Idres and Mohiuddin, A. K. M. (2021) A review of HVAC system optimization and its effects on saving total energy utilization of a building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2289-7879 (In Press)

Revichandran, Rajeanderan and Syed Mohamed Ali, Jaffar and Idres, Moumen and Mohiuddin, A.K.M (2021) Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2289-7879 (In Press)

Satish, T. Sathish and Mohanavel, V. and Afzal, Asif and Arunkumar, M. and Ravichandran, M. and Khan, Sher Afghan and Rajendaran, Parvathy and Asif, Mohammad (2021) Advancement of steam generation process in water tube boiler using Taguchi design of experiments. Case Studies in Thermal Engineering, 27 (101247). pp. 1-15. ISSN 2214-157X

Shabana, Aysha and Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2021) Estimation of stiffness derivative for ogives at constant specific heat ratio γ = 1.666 at hypersonic mach numbers. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12 (10). pp. 316-325. E-ISSN 1309-4653

Shaheer, Ahmed Khan and Zakaria, Mohammed Zain and Mansoor, Mohammad and Hasan Mahfuz, M.M. and Rahman, Mohammed Ataur and Noor Rashid, Mir Akmam and Rais, Mohammad Salman (2021) Performance investigation of ZnO/PVA nanocomposite film for organic solar cell. Materials Today:Proceedings, 46 (9). xx-xx. ISSN 2214-7853

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ahmad, Meor iqram Meor (2021) Numerical investigation on the damage of whirling engine blades subjected to bird strike impact. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 193-199. ISSN 1990-7710

Siddique, Umair M and Syed, Ashfaq and Khan, Sher Afghan and Meyer, Josua P. (2021) On numerical investigation of heat transfer augmentation of flat target surface under impingement of steady air jet for varying heat flux boundary condition. Journal of Thermal Analysis and Calorimetry. ISSN 1388-6150 E-ISSN 1588-2926

Syed Mohamed Ali, Jaffar and Amran, Mohd Farid and Mohamad, Nurul Aziz (2021) Experimental study on the effect of boundary layer control on the aerodynamics characteristics of NACA 0021 Aerofoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2811 - 3950 (In Press)

Talikoti, Mohammed Aqeel and Kittur, M I and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. Materials Today, 47. pp. 6147-6152. ISSN 2214-7853

Viannie, Leema Rose and Banapurmath, N.R. and Soudagar, Manzoore Elahi M. and Nandi, Anilkumar V. and Hossain, Nazia and Shellikeri, Ashwini and Kaulgud, Vinita and Mujtaba, MA and Khan, Sher Afghan and Asif, Mohammad (2021) Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets. Journal of Environmental Chemical Engineering, 9 (6). pp. 1-8. ISSN 2213-3437

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal (2021) Internal flow dynamics and performance of pulse detonation engine with alternative fuels. Energy, 237. pp. 1-10. ISSN 0360-5442

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). pp. 1-23. ISSN 1996-1944

Zayan, Jalal Mohammed and Rasheed, Abdul Khaliq and John, Akbar and Khalid, Mohammad and Ismail, Ahmad Faris and Aabid, Abdul and Baig, Muneer (2021) Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and Taguchi method. Materials, 15 (1). E-ISSN 1996-1944

Zohary, Aideal Czar and Asrar, Waqar and Mohammed Aldheeb, Mohammed Abdulmalek (2021) Numerical investigation on the pressure drag of some low-speed airfoils for UAV application. CFD Letters, 13 (2). pp. 29-48. ISSN 2180-1363

Book Chapter

Rahman, Mohammed Ataur and Sany, Ihsan and Ahmad, Faris Ismail (2021) Techno-Economic Analysis of Retrofitted Electric Coaster Introduction in University Campus. In: New Approaches in Engineering Research. B.P International, B P International, Guest House Road, Street no - 1/6, Hooghly, West Bengal, India, pp. 91-108. ISBN 978-93-91882-73-0

Proceeding Paper

Aabid, Abdul and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Rao, K Srinivasa (2021) Effect of control on the duct flow at high mach numbers. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th -11th December 2020, Hyderabad, India.

Aabid, Abdul and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Avala Raji (2021) Investigation of flow growth in a duct flows for higher area ratio. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th -11th December 2020, Hyderabad, India.

Abdul Aabid, Azmil Afifi and Khan, Sher Afghan (2021) Numerical investigation of splitter plate effect on the bluff body using finite volume method. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Abdullah, Nur Azam (2021) Pembangunan teknologi aeroangkasa bagi pertahanan nasional. In: Webinar Aviation, Aero Space and Space Awareness, Virtual. (Unpublished)

Abdullah, Nur Azam (2021) Penggubalan polisi: merangka kapasiti pertahanan negara masa hadapan. In: Bengkel Merangka Kapasiti Pertahanan Negara Masa Hadapan: Pembangunan Rangka Tindakan Kapasiti Pertahanan (RTKP) - Kertas Putih Pertahanan (KPP), 4 May 2021, Hotel InterContinental, Kuala Lumpur. (Unpublished)

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman (2021) Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6). In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor iqram Meor (2021) Limit Cycle Oscillation (LCO) flutter of advanced high modulus graphite/epoxy composite oscillating supersonic wing. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 8 - 9 March 2021, Pulau Pinang.

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Afiq Safwan, Ahmad Afandi and Jaffar Syed, Mohamed Ali (2021) Educational software for stress analysis of idealized multi-spar aircraft wing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 Jun 2021, Virtual. (Unpublished)

Ahmad, Mohamed Tarmizi and Jagannathan, A. and Abidin, Razali and Noordin, M. N.H. and Wan Ya’acob, Wan Mohd Hanif and Zhahir, Amzari and Azami, Muhammad Hanafi (2021) Ballistic test investigation of hybrid rocket motor utilizing stearic acid biofuel with energetic additives for regression rate enhancement. In: 6th International Conference on Green Design and Manufacture 2020, IConGDM 2020, 23 - 24 July 2020, Arau, Perlis, Malaysia.

Altalmas, Tareq, M. and Ahmad, Salmiah and Sediono, Wahju and Nik Hashim, Nik Nur Wahidah and Embong, Abd Halim and Hassan, Surul Shahbudin (2021) Al-Hams and Al-Jahr Sifaat evaluation using classification approach. In: International Symposium of Scientific Research and Innovative Studies (ISSRIS'21), 22nd-25th February 2021, Turkey.

Delvi, Hamza Afser and Ridwan, R and Muneer, Rayid and Faheem, Mohammed and Khan, Sher Afghan (2021) Influence of microjets on flow development at supersonic mach numbers with sudden expansion. In: International Conference on Research and Advances in Mechanical Engineering(ICRAME 2020), 10th-11th December 2020, Hyderabad, India.

Djemana, Mohamed and Benyoucef, Rania and Hrairi, Meftah (2021) Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Kuala Lumpur, Malaysia. (Unpublished)

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2021) Numerical Simulation of Electromechanical Impedance-Based Damage Monitoring of Metallic Structures. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Kuala Lumpur, Malaysia. (Unpublished)

Djemana, Mohamed and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2021) Temperature influence on electromechanical impedance method used for damage detection in metallic structure. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), Virtual, Kuala Lumpur, Malaysia. (Unpublished)

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Mohammed Sapardi, Mohd Azan (2021) Estimation of Mach numbers in supersonic jets using schlieren images. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, Nitte, Karnataka, India.

Faheem, Mohammed and Khan, Aqib and Kumar, Rakesh and Khan, Sher Afghan and Asrar, Waqar and Sapardi, Mohd Azan Mohammed (2021) Experimental study of midplane jet evolution in multiple jets at Mach 2.0. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, 22-23 December 2020, Nitte, India.

Faheem, Mohammed and Rayid, Muneer and Avvad, Mohammad and Aneeque, Mohammad and Khan, Sher Afghan (2021) Influence of microjets on flow development for diameter ratio of 1.6 for correctly expanded nozzles. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Faheem, Mohammed and Ridwan, R and Muneer, Rayid and Aneeque, Mohammed and Khan, Sher Afghan (2021) Effect of expansion level on the flow development with sudden expansion at high Mach numbers. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, SME 2020, Nitte, Karnataka, India.

Faheem, Mohammed and Ridwan, R and Rayid, Muneer and Delvi, Hamza Afser and Khan, Sher Afghan (2021) Impact of expansion level on flowfield with sudden expansion at supersonic regimes. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, 22 - 23 December 2020, Nitte, India.

Hazmi, Alia Tasnim and Ahmad, Farah and Mohd Hatta, Maziati Akmal and Md Ralib, Aliza Aini (2021) Microbial chitosan for the fabrication of piezoelectric thin film. In: The 6th International Online Conference on Science, Technology, and Interdisciplinary Research 2020, Kuala Lumpur.

Idres, Moumen and Mohd Nizum, Ahmad Hazwan and Wan Mohamad Fathi, Wan Muhammad Adam and Okasha, Mohamed Elsayed Aly Abd Elaziz (2021) Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22-23 Jun 2021, Virtual. (Unpublished)

Idres, Moumen and Saiful Azmi, Muhamad Adi Muqri (2021) Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Ihsan, Sany Izan (2021) Retrofitting electric vehicle: The IIUM journey achievements, challenges and moving forward. In: The First UNITED SAIG International Conference International Collaboration Towards Sustainable and Green Automotive Technology, 21-22 April 2021, Chulalongkorn University, Thailand.

Ismail, Izham Izzat and Asmun, Siti Nurfaiqah and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2021) Numerical analyses for regression rate solid fuel doped with high entropy alloys in hybrid rocket motor. In: International Seminar on Aeronautics and Energy 2021 (ISAE 2021), 28 August 2021, Johor Bahru. (Unpublished)

Khan, Md. Raisuddin and Antong, Hasmawati and Wahid, Azni Nabela and Nor, Khairul A.M. and Abdul Hamid, Syamsul Bahrin and Sophian, Ali (2021) Mechatronics Engineering Curriculum in the new perspective. In: International Conference On Engineering Professional Ethics and Education (ICEPEE’21), Malaysia.

Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Ridwan, R and Rayid, Muneer and Suheel, J I and Faheem, Mohammed (2021) Benefit of Mach number and expansion level on the flow development in a cylindrical tube diameter of 18 mm. In: 2021 International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22 - 23 April 2021, Bhopal.

Khan, Sher Afghan and Ibrahim, Omar Mohamed and Aabid, Abdul (2021) CFD analysis of compressible flows in a convergent-divergent nozzle. In: 2nd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME), 22-23 December 2020, Nitte, India.

Kittur, Mohammad Yaseen and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Ali and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Mechanical response of aluminum 7075 with heat treatment and exfoliation corrosion. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 3rd International Conference on Green Engineering & Technology 2021 (IConGETech), 4th February 2021, Virtual conference. (Unpublished)

Othman, Farid and Abdullah, Nur Azam and Sulaeman, Erwin and Khan, Sher Afghan (2021) Novel pneumatic system for lime dosage in water treatment application. In: 1st International Conference on Material Processing and Technology (ICMProTech 2021), Virtual.

Rahman, Muhammad and Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Suhaimi, Nur Shufinah and Ahmad, Meor Iqram Meor and Nuawi, Mohd Zaki and Ariffin, Ahmad Kamal and Abdullah, Nur Azam (2021) A review on modes of failure of rail tracks in railway transportation. In: 2nd Virtual Conference on Computational and Experimental Mechanics (VCCEM 21), 1-2 December 2021, Virtual Platform.

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Mohamed Ali, Jaffar Syed and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Crash analysis of aircraft composite fuselage under belly landing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Talikoti, Mohammed Aqeel and Kittur, Md Ibrahim and Reddy, Avala Raji and Baig, Maughal Ahmed Al and Ridwan, R and Khan, Sher Afghan and Faheem, Mohammed (2021) Influence of high and subsequent low-temperature artificial aging on exfoliation corrosion of AA2024. In: International Conference on Technology Innovation in Mechanical Engineering, TIME 2021, 22-23 April 2021, Virtual.

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2021) Study on the lateral torsional buckling of composite thin-walled beam. In: BICET, 8th Brunei International Conference Engineering and Technology, 8-10 Nov 2021, Brunei Darussalam.. (Unpublished)

Copyright

Ahmad, Salmiah and Altalmas, Tareq, M. and Nik Hashim, Nik Nur Wahidah and Embong, Abd Halim and Sediono, Wahju and Hassan, Surul Shahbudin (2021) Sana Al-Tajweed. [Copyright] (Unpublished)