Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2016

Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) Biogas upgrading by chemical absorption using a packed column apparatus. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) A review of chemical absorption of carbon dioxide for biogas upgrading. Chinese Journal of Chemical Engineering, 24 (6). pp. 693-702. ISSN 1004-9541

Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) A simulation study for the upgrading of biogas using aqueous ammonia. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abdullah, Muhammad and Rossiter, John Anthony (2016) Utilising laguerre function in predictive functional control to ensure prediction consistency. In: 2016 UKACC 11th International Conference on Control (CONTROL), 31st August-2nd September 2016, Belfast, Northern Ireland, UK.

Afzal, Asif and Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Abdul Rahim, Shebeer (2016) Structural analysis of vee-cap sheet metal component. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE), 18 (6). pp. 79-83. ISSN 2320-334x E-ISSN 2278-1684

Ahamd Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim (2016) Effect of thread material and stitch orientation on tensile mechanical property of stitched oil palm empty fruit bunch fiber reinforced epoxy composites. Journal of Built Environment, Technology and Engineering, 1. pp. 282-288. ISSN 0128-1003

Ahamed, Raju and Rashid, Muhammad Mahbubur and Islam, Jahidul and Javed, Asief and Md Yusof, Hazlina (2016) Energy generation from revolving door. Indian Journal of Science and Technology, 9 (19). pp. 1-6. ISSN 0974-6846 E-ISSN 0974-5645

Ahmad, Kartini and Hanouf, Zahir and Ishak, Anuar (2016) Mixed convection Jeffrey fluid flow over an exponentially stretching sheet with magnetohydrodynamic effect. AIP Advances, 6 (3). 035024-1-035024-7. ISSN 2158-3226

Ahmad, Zuraida and Zain, Saidi and Ismail, Ahmad Faris and Salleh, Md. Noor and Machouche, Salah (2016) Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4. pp. 1-7. E-ISSN 2289-9855

Ahmed, Khizar Pathan and Dabeer, P.S. and Khan, Sher Afghan (2016) CFD analysis of the supersonic nozzle flow with sudden expansion. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE ), 18 (6). pp. 5-7. ISSN 2320-334x E-ISSN 2278-1684

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608

Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608

Akhtaruzzaman, Md and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Gait analysis: systems, technologies, and importance. Journal of Mechanics in Medicine and Biology, 16 (7). pp. 1-45. ISSN 0219-5194

Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2016) Automated threshold detection for object segmentation in colour image. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4100-4104. ISSN 1819-6608

Albarody, Thar M. Badri and Al-Kayiem, Hussain H. and Faris, Waleed Fekry (2016) The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1). pp. 77-87. ISSN 1738-494X E-ISSN 1976-3824

Alkharasani, Batool Abdulsamad and Hassan, Mohd Khair and Akmeliawati, Rini and Zafira, Ribhan (2016) PID-sliding surface based sliding mode controller for anti-lock braking system of electric vehicle. Advanced Science Letters, 22 (10). pp. 2734-2737. ISSN 1936-6612 E-ISSN 1936-7317

Altaf, Afaq and Tan, Boon Thong and Omar, Ashraf Ali and Asrar, Waqar (2016) Impact of a reverse delta type add-on device on the flap-tip vortex of a wing. International Journal of Aviation, Aeronautics, and Aerospace, 3 (3). pp. 1-28. E-ISSN 2374-6793

Aminanda, Yulfian and Abd Kadir, Nurdina and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2016) Experimental study on energy absorption of foam filled kraft paper honeycomb subjected to quasi-static uniform compression loading. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8-9 Nov 2016, Kuala Lumpur.

Asad Ullah, Mohammed and Bashir, Musavir and Janvekar, Ayub and Khan, Sher Afghan (2016) Active control of wall pressure flow field at low supersonic Mach numbers. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 3. pp. 90-98. ISSN 2320-334x E-ISSN 2278-1684

Azami, Muhammad Hanafi and Savill, Mark (2016) Comparative analysis of alternative fuels in detonation combustion. In: 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 25th-27th July 2016, Salt Lake City, Utah, US.

Azami, Muhammad Hanafi and Savill, Mark (2016) Modelling of spray evaporation and penetration for alternative fuels. Fuel, 180. pp. 514-520. ISSN 0016-2361

Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 July 2016, Kuala Lumpur; Malaysia.

Bashir, Musavir and Azam, Qummare and Khan, Sher Afghan and Baig, Maugal Ahmed Ali (2016) Control of wall pressure flow field with micro jets and control effectiveness. IOSR Journal of Machanical & Civil Engineering, 3. pp. 99-107. ISSN 2320-334x E-ISSN 2278-1684

Bashir, Musavir and Baig, Maughal Ahmed Al and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3. pp. 76-82. ISSN 2320-334x E-ISSN 2278-1684

Chaudhary, Zakir Ilahi and Shinde, V.B and Bashir, Musavir and Khan, Sher Afghan (2016) Experimental studies of the base flow from the nozzles with sudden expansion with micro jets. International Journal of Energy, Environment, and Economics, 24 (1). pp. 59-66. ISSN 1054-853X

Crasta, Asha and Pavithra, S and Khan, Sher Afghan (2016) Estimation of surface pressure distribution on a delta wing with curved leading edges in hypersonic/supersonic flow. International Journal of Energy, Environment, and Economics, 24 (1). pp. 67-73. ISSN 1054-853X

Crasta, Asha and Shabana, Aysha and Monis, Renita and Khan, Sher Afghan (2016) Analysis of variation of stiffness derivative with Mach number and angle of attack for a supersonic flow. IOSR Journal of Mechanical & Civil Engineering, 12 (6). pp. 97-104. ISSN 2320-334x E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2016) Effect of aspect ratio with roll moment derivative of a delta wing in supersonic flow. International Journal of Advances in Engineering Research (IJAER), 12 (1). pp. 10-15. ISSN 2454-1796 E-ISSN 2231-5152

Darsivan, Fadly Jashi (2016) The investigation of a ride quality of nonlinear half-car model. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 25–27 July 2016, Kuala Lumpur, Malaysia, 25-27 July 2016, IIUM, Gombak.

Djemana, Mohamed and Hrairi, Meftah (2016) Modelling and simulation of impedance-based damage monitoring of structures. International Journal of Simulation Modelling, 15 (3). pp. 395-408. E-ISSN 1726-4529

Elmoselhy, Salah A M and Faris, Waleed Fekry and Rakha, Hesham A. (2016) Experimentally validated analytical modeling of diesel engine power and in-cylinder gas speed dynamics. Journal of Mechanical Science and Technology, 30 (10). pp. 4725-4734. ISSN 1738-494X E-ISSN 1976-3824

Eshteyah, Mohanna and Hrairi, Meftah (2016) Multi-objective optimization of clinching joints quality using Grey-based Taguchi method. The International Journal of Advanced Manufacturing Technology, 87. pp. 233-249. ISSN 0268-3768 E-ISSN 1433-3015

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768 E-ISSN 1433-3015

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah (2016) Validated analytical modeling of diesel engine regulated exhaust CO emission rate. Advances in Mechanical Engineering, 8 (6). pp. 1-15. ISSN 1687-8140

Fharukh, G M and Asad Ullah, M and Khan, Sher Afghan (2016) Exprimental study suddenly expanded flow from correctly expanded nozzles. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 10041-10047. ISSN 1819-6608

Fuad, A. F.M. and Mahmood, Iskandar Al-Thani and Ahmad, Salmiah and Norsahperi, N. M.H. and Toha, Siti Fauziah and Akmeliawati, Rini and Darsivan, Fadly Jashi (2016) Modeling and simulation for heavy-duty mecanum wheel platform using model predictive control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

G M, Fharukh Ahmed and Baig, Maugal Ahmed Ali and Bashir, Musavir and Khan, Sher Afghan (2016) Control of ideally expanded and under expanded nozzle flows with micro jets. IOSR journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 83-89. ISSN 2320-334x E-ISSN 2278-1684

Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam (2016) Reliability analysis of multiphase flow measurements in different oil fields. Oil Gas European Magazine, 42 (3). pp. 133-139. ISSN 0342-5622

Haque, Anwar Ul and Asrar, Waqar and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed and Omar, Ashraf Ali (2016) A prospective solution For consistent aerostatic lift for a hybrid buoyant aircraft. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 -10 March 2016, JW Marriott Hotel K LKuala Lumpur.

Hawlader, Mohammad Nurul Alam and Baradey, Y. and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology. Advances in Drying Science & Technology . CRC Press, Boca Raton, Florida, pp. 189-215. ISBN 978-1-4987-3499-8

Heraiz, M and Sahnoune, F and Hrairi, Meftah and Saheb, Nouari and Ouali, A (2016) Kinetics of mullite formation from kaolinite and boehmite. Molecular Crystals and Liquid Crystals, 628 (1). pp. 55-64. ISSN 1542-1406 E-ISSN 1563-5287

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6. pp. 496-504. ISSN 2211-3797

Islam, Mazharul and Langfeldt, Felix and Fürst, Jiri and Wood, David H. (2016) CFD analysis of a SD 7003 airfoil with a local correlation based transition and turbulence model. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16), 2nd-4th July 2013, Kuala Lumpur. (Unpublished)

Jarin, Sams and Khatun, Mst Khaleda and Shafie, Amir Akramin (2016) Multi-objective constrained algorithm (MCA) and non-dominated sorting genetic algorithm (NSGA-ii) for solving multi-objective crop planning problem. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4079-4086. ISSN 1819-6608

Kausalyah, Venkatason and Shasthri, Sivaguru and Abdullah, Kassim Abdulrahman and Mahmoud Idres, Moumen Mohammed and Shah, Qasim Hussain (2016) Development and optimization of passenger car front profile using polynomial response surface method. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5161-5166. ISSN 1819-6608

Khan, Sher Afghan and Bashir, Musavir and G M, Fharukh Ahmed and Ullah, M. Asad (2016) An investigation of base flow control by wall pressure analysis in a suddenly expansion nozzle. Journal of Scientific Research and Development, 3 (5). pp. 1-6. ISSN 1115-7569

Khan, Sher Afghan and G M, Fharukh Ahmed (2016) Experimental study of suddenly expanded flow from correctly expanded nozzles. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation, 7th-8th April 2016, Chennai, India.

Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2016) Characterization of magnetorheological elastomer (MRE) engine mounts. Materials Today: Proceedings, 3 (2). pp. 411-418. ISSN 2214-7853

Legowo, Ari and Ramli, M. Faiz and Syafiq Shamsudin, Syariful (2016) Development of Sense and Avoid system based on multi sensor integration for unmanned vehicle system. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

M., Norfahana and Ismail, Ahmad Faris and Majid, Z. A. A. (2016) An evaluation of heat loss on top of solar collector with multilayered absorber in solar water heating system. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 281-285. ISSN 1819-6608

M. M, Eshtayeh and Hrairi, Meftah (2016) Recent and future development of the application of finite element analysis in clinching process. International Journal of Advanced Manufacturing Technology, 84 (9). pp. 2589-2608. ISSN 0268-3768 E-ISSN 1433-3015

M. Nasir, M. Nazreen and Mezeix, Laurent and Aminanda, Yulfian and Seman, Adam and Rivai, Ahmad and Ali, Karim Mansur (2016) Spring-back simulation of unidirectional carbon/epoxy L- shaped laminate composites manufactured through autoclave processing. In: Joint conference of 2nd International Manufacturing Engineering Conference ( iMEC 2015) & 3rd Asia-Pacific Conference on Manufacturing Systems (APCOMS 2015), 12th-14th November 2015, Kuala Lumpur, Malaysia.

Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 1-4. ISSN 2320-334x E-ISSN 2278-1684

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Sulaeman, Erwin and Omar, Ashraf Ali (2016) A review on aerodynamics of nonflapping bird wings. Journal of Aerospace Technology and Management, 8 (1 (Jan-Mar)). pp. 7-17. ISSN 1984-9648 E-ISSN 2175-9146

Mohd Hatta, Maziati Akmal and Abd Rashid, Mohd Warikh M. and Azlan, Umar Al Amani and Azam, Mohd Asyadi and Anand, T. Joseph Sahaya and Moriga, Toshihiro (2016) Structural evolution and dopant occupancy preference of yttrium-doped potassium sodium niobate thin films. Journal of Electroceramics, 37 (1-4). pp. 50-57. ISSN 1385-3449 E-ISSN 1573-8663

Mohd Nasir, Mohd Narizee and Aminanda, Yulfian and Mezeix, Laurent and Seman, Mh Adam and Rivai, Ahmad and Ali, Karim M (2016) Spring-back simulation of flat symmetrical laminates with angled plies manufactured through autoclave processing. In: AEROTECH VI - Innovation in Aerospace Engineering and Technology, 8th-9th November 2016, Kuala Lumpur, Malaysia.

Mohd Nasir, Mohd Nazreen and Seman, Mh Adam and Mezeix, Laurent and Aminanda, Yulfian and Rivai, Ahmad and Ali, Karim M. (2016) Effect of the corner angle on spring-back deformation for unidirectional L-shaped laminate composites manufactured through autoclave processing. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 315-318. ISSN 1819-6608

Monis, Renita Sharon and Shabana, Ayesha and Crasta, Asha and Khan, Sher Afghan (2016) Supersonic flow analysis and evaluation of damping derivative. IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 18 (6). pp. 29-36. ISSN 2320-334x E-ISSN 2278-1684

Pavithra, Shanbhag, and Bashir, Musavir and S, Lavanya and Khan, Sher Afghan (2016) Estimation of stability derivatives in pitch for an oscillating 2-D wedge in supersonic Flow. Advances and Applications in Fluid Mechanics, 19 (4). pp. 873-882. ISSN 0973-4686

Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J and S.Vas, Jolene (2016) Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for mach 3.0 using CFD. International Journal of Energy, Environment, and Economics, 24 (1). pp. 87-97. ISSN 1054-853X

Quadros, Jaimon Dennis and Khan, Sher Afghan and A. J., Antony and Vas, Jolene S. (2016) Experimental and numerical studies on flow from axisymmetric nozzle flow with sudden expansion for Mach 3.0 using CFD. In: International Conference on Energy Systems and Developments (ICESD2016), 19th-20th Feb. 2016, Pune, India.

Rahman, Mizanur and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Khan, Sheroz (2016) Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 362-367. ISSN 1819-6608

Rahman, Mohammed Ataur and Rafia, Afroz (2016) Lithium battery recycling management and policy. International Journal of Energy Technology and Policy, 13 (3). pp. 278-291. ISSN 1741-508X E-ISSN 1472-8923

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Mokhtar, Hannan (2016) The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015), 6th-9th Dec. 2015, Singapore.

Sabaneh, Omar A. O. and Faris, Waleed Fekry and Okasha, Mohamed Elsayed Aly Abd Elaziz and Hasbullah, Faried (2016) A mixed control system for active suspension for off-road vehicles. International Journal of Vehicle Noise and Vibration, 12 (2). pp. 101-137. ISSN 1479-148X E-ISSN 1479-1471

Sethuraman, Vigneshvaran and Thong, Kenny Tan Boon and Khan, Sher Afghan (2016) Effect of sudden expansion for varied area ratios at subsonic and sonic flow regimes. In: International Conference on Energy Systems and Developments (ICESD2016), 19th-20th Feb. 2016, Pune, India.

Shabana, Ayesha and Monis, Renita and Crasta, Asha and Khan, Sher Afghan (2016) Pressure and its derivative with respect to piston Mach number for an oscillating cone. IOSR journal of Mechanical and Civil Engineering ( IOSR-JMCE ), 18 (6). pp. 74-78. ISSN 2320-334X E-ISSN 2278-1684

Shanbhag, Pavithra and Lavanya, S and Khan, Sher Afghan and Crasta, Asha (2016) Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. Indian Journal of Science and Technology, 9 (34). pp. 1-4. ISSN 0974-6846 E-ISSN 0974-5645

Shanbhag, Pavitra and Lavanya , S and Khan, Sher Afghan and Crasta, Asha (2016) Estimation of aerodynamic derivatives in pitch of a wedge in hypersonic flow. In: 2nd International Conference on Design, Analysis, Manufacturing & Simulation, 7th-8th April 2016, Chennai, India. (Unpublished)

Shasthri, Sivaguru and Kausalyah, Venkatason and Shah, Qasim Hussain and MahmoudIdres, Moumen Mohamed and Wong, S. V. (2016) A parametric study of neck moment response in a 3 year old child subjected to oblique side impact. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5126-5133. ISSN 1819-6608

Syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and W. F., Waleed (2016) Buckling analysis of isotropic circular plate with attached annular piezoceramic plate. Malaysian Journal of Mathematical Sciences, 10. pp. 443-458. ISSN 1823-8343

Syed Mohamed Ali, Jaffar and Alsubari, Saleh and Aminanda, Yulfian (2016) Hygrothermoelastic analysis of orthotropic cylindrical shells. Latin American Journal of Solids and Structures, 13 (3). pp. 573-589. ISSN 1679-7825 (O), 1679-7817 (P) E-ISSN 1679-7825

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2016) Assessment of engine's power budget for hydrogen powered hybrid buoyant aircraft. Propulsion and Power Research, 5 (1). pp. 34-44. ISSN 2212-540X

UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohamed Ali, Jaffar Syed (2016) Estimation of pitching moment of a hybrid lifting fuselage - Disguised as hull of an airship. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2217-2221. ISSN 1819-6608

UlHaque, Anwar and Asrar, Waqar and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2016) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid buoyant aircraft. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 286-291. ISSN 1819-6608

Xudong, Zhang and Nordin, Anis Nurashikin and Li, Fang and Voiculescu, Ioana R. (2016) STRETCHABLE lab-on-chip device with impedance spectroscopy capability for mammalian cell studies. In: ASME 2016 International Mechanical Engineering Congress and Exposition, IMECE 2016, 11th-17th November 2016, Phoenix, United States.

Yosra, Yousif and Elfaki, Faiz Ahmed Mohamed and Hrairi, Meftah (2016) Analysis of partly interval-censored data under competing risks framework. International Journal of Computer Science and Network Security, 16 (8). pp. 25-28. ISSN 1738-7906

Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Machouche, Salah and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha @ Tohara, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016, 7th-8th May 2016, Kuala Lumpur.

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4. pp. 18-25. E-ISSN 2289-9855