Browse by Email

Idres, Moumen and Suliman, Suliman and Kafafy, Raed Ismail and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey.

Kafafy, Raed Ismail and Azami, Muhammad Hanafi and Idres, Moumen (2014) Effect of varying design options on the transient behavior of a hybrid rocket motor. Journal of Aerospace Technology and Management, 6 (1). pp. 69-82. ISSN 1984-964 E-ISSN 2175-9146

Kafafy, Raed and Javeed, Abdulhakeem and Ihsan, Sany Izan and Idres, Moumen (2013) Experimental investigation of the performance of flutter-based microgenerators. In: 11TH INTERNATIONAL ENERGY CONVERSION ENGINEERING CONFERENCE, July 14 - 17, 2013, San Jose, CA, USA.

Kafafy, Raed and Azami, Muhammad Hanafi and Idres, Moumen (2013) Hybrid rocket performance with varying additive concentrations. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 14 - 17, 2013, San Jose, CA . (Unpublished)

Kafafy, Raed Ismail and Azami, Hanafi and Idres, Moumen (2013) Effectiveness of wheel-typed grain design for hybrid rocket motor performance. In: Recent Advances in Energy, Environment and Development Conference, 30 Jan-01 Feb 2013, Cambridge, MA.

Javeed, Abdulhakeem and Kafafy, Raed and Idres, Moumen and Ihsan, Sany Izan (2013) Frequency estimation of flow induced vibration in thin cantilever plate. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Azami, Muhammad Hanafi and Kafafy, Raed and Idres, Moumen (2013) Simulation of wheel type fuel grain in hybrid rocket motor. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Kolo, Isa and Idres, Moumen and Kafafy, Raed and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2013) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 174-180. ISSN 1755-9766

Kafafy, Raed and Azami, Muhammad Hanafi and Idres, Moumen and Zaharim, Azami and Sopian, Kamaruzaman (2012) Development of generic algorithm in wheel-typed hybrid rocket grain design for performance estimation. In: Advances in Environment, Computational Chemistry and Bioscience, 29-31 Dec 2012, Montreux, Switzerland .

Kafafy, Raed Ismail (2012) Investigation of heat transfer effect on polymerase chain reaction. Project Report. s.n. (Unpublished)

Aldheeb, Mohammed and Kafafy, Raed and Idres, Moumen and Omar, Hanafy and Abido, Mohammad (2012) Design optimization of Micro Air Launch Vehicle using differential evolution. Journal of Aerospace Technology and Management, 4 (2). pp. 185-196. ISSN 1984-9648, 2175-9146

Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2012) Particle Swarm-Based Micro Air Launch Vehicle Trajectory Optimization Method. http://www.google.com/patents/US8332085.

Khaliq R., Abdul and Kafafy, Raed Ismail and Salleh, Hamzah Mohd. and Faris, Waleed Fekry (2012) Enhancing the efficiency of polymerase chain reaction using graphene nanoflakes. Nanotechnology, 23 (45). pp. 1-8. ISSN 0957-4484

Hameed, Ammar and Kafafy, Raed and Idres, Moumen (2012) One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 163-168. ISSN 1755-9766

Hameed, Amar Hasan and Kafafy, Raed (2012) Thermoelectrically controlled micronozzle - A novel application for thermoelements. Journal of Mechanical Science and Technology, 26 (11). pp. 3631-3641. ISSN 1976-3824 (O), 1738-494X (P)

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2012) Vaporization characteristics of ethanol and 1-propanol droplets at high temperatures. Atomization and Sprays, 22 (3). pp. 207-226. ISSN 1044-5110

Faris, Waleed Fekry and Rakha, Hesham and Kafafy, Raed Ismail and Mohammed Idres, Moumen and Elmoselhy, Salah (2011) Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 318-392. ISSN 1745-6444 (O), 1745-6436 (P)

Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2011) Particle swarm optimization of micro air launch vehicle trajectory. Canadian Aeronautics and Space Journal, 57 (2). pp. 115-120. ISSN 1712-7998 (O)

Mahmoud Idres, Moumen Mohammed and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.

Aldheeb, M and Kafafy, Raed and Idres, Moumen and Omar, H. (2011) Particle swarm optimization of air-launch vehicle and trajectory. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)

Kafafy, Raed and Hameed, Ammar (2011) Modeling of non-uniform thermoelement devices subject to lateral heat convection. Defect and Diffusion Forum, 312. pp. 782-787. ISSN 1012-0386

Mohammed Idres, Moumen and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. International Journal of Vehicle systems Modelling and Testing, 6 (3/4). pp. 396-407. ISSN 1745-6436

Kafafy, Raed Ismail and Che Mat, Sharzali (2011) Assessment of free-rotating air swirling device to reduce SI engine emissions and improve fuel economy. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 283-306. ISSN 1745-6444 (O), 1745-6436 (P)

Idres, Moumen and Kafafy, Raed Ismail (2011) Design of an autopilot for an autonomous unmanned aerial vehicle. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 59-68. ISBN 9789670225685

Rasheed, Abdul Khaliq and Kafafy, Raed Ismail and Faris, Waleed Fekry and Mohd. Salleh, Hamzah (2011) Enhancement of polymerase chain reaction using graphene nano-flakes. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Hameed, Amar Hasan and Kafafy, Raed Ismail (2011) Generalized one-dimentional flow inside thermo-electrically controlled micronozzle. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 394-402. ISBN 9789670225685

Kafafy, Raed (2011) Immersed finite element method (IFEM). In: Advanced Numerical Techniques in Engineering and Science. IIUM Press, Kuala Lumpur, pp. 295-346. ISBN 978-967-418-020-1

Kafafy, Raed and Idres, Moumen and Aldheeb, M. and Omar, H. (2011) On the scaling of air launch vehicles. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Mohammed Idres, Moumen and Hasan, Amar and Kafafy, Raed (2011) One dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-Based thermoelectrically controlled micronozzle. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)

Hassan, Sayed Desouky and Faris, Waleed Fekry and Kafafy, Raed (2011) Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 46-54. ISBN 9789670225821

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2011) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11, 17 - 19 May 2011, Kuala Lumpur. (Unpublished)

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of 1-propanol droplets at high temperatures. In: ILASS – Europe 2011, 24th European Conference on Liquid Atomization and Spray System, 5 - 7 September 2011, Estoril, Portugal.

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2011) Vaporization characteristics of ethanol droplets: Influence of the environment humidity. In: Proceedings of ASME Turbo Expo 2011, 6-10 June 2011, Vancouver, British Columbia, Canada.

Mohamed Idres, Moumen and Kafafy, Raed (2010) Dynamic thermal model for proton-exchange membrane fuel cell. In: International Conference on Sustainable mobility 2010, 1-3 Dec 2010, Kuala Lumpur, Malaysia. (Unpublished)

Kafafy, Raed Ismail and Cao, Y. (2010) Modelling ion propulsion plume interactions with spacecraft in formation flight. Aeronautical Journal, 114 (1157). pp. 417-426. ISSN 0001-9240

Kafafy, Raed and Yong, Cao (2010) Modeling Ion propulsion plume interactions with spacecraft in formation flight. The Aeronautical Journal, 114 (1157). pp. 417-426. ISSN 0001-9240

Hasim, Fadilah and Rusyadi, Rusman and Surya, Wijaya Indra and , Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) The IIUM low speed wind tunnel. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, 18-19 December 2008, Kuching Serawak. (Unpublished)

Hasim, Fadilah and Rusyadi, Rusman and Indra Surya, Wijaya and ., Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) Flow field characteristics of the IIUM low speed wind tunnel. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 7-10 Dec. 2008, Taiwan. (Unpublished)