Browse by Email

Makwana, Mayur Bharatbhai and Bellary, Sayed Ahmed Imran and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2025) Passive control of sonic flow from converging nozzle with D-shaped rib. Results in Engineering, 26. pp. 1-27. ISSN 2590-1230

Khan, Ambareen and Aabid, Abdul and Akhtar, Mohammad Nishat and Khan, Sher Afghan and Baig, Muneer (2025) Supersonic flow control with quarter rib in a duct: An extensive CFD study. International Journal of Thermofluids, 26 (101060). 1- 22. ISSN 2666-2027

Shaikh, Abdul Aabid and Rosli, Muhammad Nur Syafiq and Hrairi, Meftah and Baig, Muneer (2025) Enhancing repair of cracked plate using fiber-reinforced composite patch: experimental and simulation analysis. Forces in Mechanics, 18. pp. 1-14. ISSN 2666-3597

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam (2025) Effect of temperature and adhesive defect on repaired structure using composite patch. Frattura ed Integrita Strutturale, 19 (71). pp. 124-150. E-ISSN 1971-8993

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2025) Integrating AI and statistical methods for enhancing civil structures: current trends, practical issues and future direction. Frattura ed Integrita Strutturale, 19 (71). pp. 164-181. ISSN 1971-8993

Syed Mohamed Ali, Jaffar and Kamaruddin, Hamdi and Aabid, Abdul (2025) Study on the propeller characteristics of a vertical takeoff and landing aircraft. Journal of Advanced Research in Applied Mechanics, 129 (1). pp. 12-23. E-ISSN 2289-7895

Khan, Ambareen and Aabid, Abdul and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Baig, Muneer (2024) Comprehensive CFD analysis of base pressure control using quarter ribs in sudden expansion duct at sonic Mach numbers. International Journal of Thermofluids, 24. pp. 1-17. ISSN 2666-2027

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam and Baig, Muneer (2024) Comparative analysis of active bonded piezoelectric repair systems for damaged structures under mechanical and thermo-mechanical loads. Actuators, 13 (10). pp. 1-28. E-ISSN 2076-0825

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Civil structural health monitoring and machine learning: a comprehensive review. Frattura ed Integrita Strutturale, 18 (69). pp. 43-59. E-ISSN 1971-8993

Anjum, Asraar and Hrairi, Meftah and Aabid, Abdul and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Examining the efficacy of finite element method for detecting damage in aluminium structures. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 110-121. ISSN 2289-7895

Shaikh, Abdul Aabid and Hrairi, Meftah and Raheman, Md Abdul and Ibrahim, Yasser E. (2024) Enhancing aircraft crack repair efficiency through novel optimization of piezoelectric actuator parameters: a design of experiments and adaptive neuro-fuzzy inference system approach. Heliyon, 10 (11). pp. 1-27. ISSN 2405-8440 E-ISSN 2405-8440

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Damage detection in concrete structures with impedance data and machine learning. Bulletin of the Polish Academy of Sciences: Technical Sciences, 72 (3). pp. 1-11. ISSN 0239-7528 E-ISSN 2300-1917

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Anjum, Asraar and Shaikh, Abdul Aabid and Hrairi, Meftah (2023) Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach. Frattura ed Integrita Strutturale, 17 (66). pp. 112-126. E-ISSN 1971-8993

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2022) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). pp. 1-21. ISSN 1996-1944

Kamarudin, Mohamad Norfaieqwan and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Ibrahim, Yasser E. (2022) Buckling analysis of a thin-walled structure using finite element method and design of experiments. Aerospace, 9 (10). pp. 1-31. E-ISSN 2226-4310

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Raheman, Md Abdul and Zayan, Jalal Mohammed and Shabbir, Omer (2022) Reviews on design and development of unmanned aerial vehicle (drone) for different applications. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 53-69. ISSN 1024-1752

Aabid, Abdul and Perveez, Bisma and Perveen, Nagma and Khan, Sher Afghan and Shabbir, Omar (2022) A case study of unmanned aerial vehicle (drone) technology and its applications in the COVID-19 pandemic. Journal of Mechanical Engineering Research and Developments, 45 (2). pp. 70-77. ISSN 1024-1752

Zayan, Jalal Mohammed and Rasheed, Abdul Khaliq and John, Akbar and Khalid, Mohammad and Ismail, Ahmad Faris and Aabid, Abdul and Baig, Muneer (2021) Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and Taguchi method. Materials, 15 (1). E-ISSN 1996-1944

Mohamed Ali, Jaffar Syed and W Embong, Wan Muhammad Hafizuddin and Aabid, Abdul and UNSPECIFIED (2021) Effect of cut-out shape on the stresses in aircraft wing ribs under aerodynamic load. CFD Letters, 13 (11). pp. 87-94. ISSN 2180-1363

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2021) Study on the lateral torsional buckling of composite thin-walled beam. In: BICET, 8th Brunei International Conference Engineering and Technology, 8-10 Nov 2021, Brunei Darussalam.. (Unpublished)