IIUM Repository

Items where Author is "Mohiuddin, A. K. M."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 185.

Article

Mohammed Kh Th E, Aalazemi and Mohiuddin, A. K. M. (2019) Construction project in Kuwait international airport cargo city: issue of conflict management. International Journal of Engineering Materials and Manufacture, 4 (2). pp. 59-65. E-ISSN 1757-899X

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. and Al-Juboori, Salloom A. (2019) Conflict management of construction projects – a case study Kuwait International Airport Cargo City. International Journal of Mechanical Engineering (IJME), 8 (3). pp. 45-54. ISSN 2319-2240 E-ISSN 2319-2259

Mohiuddin, A. K. M. and Osman, Amirah and Uddin, Mohammad Faisal (2019) Development and investigation of a cooling system for a parked vehicle using solar energy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 87-92. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Sakif, Ahsan (2019) Development of electro-hydro automatic parking braking system for automotive system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 264-269. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Md Daud, Badrul (2019) Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 298-303. ISSN 2277-3878

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Factors affecting thermosyphon performance- A review of studies. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 124-133. ISSN 2277-3878

Ali, Said and Islam, Mazharul and Mohiuddin, A. K. M. and Idres, Moumen (2019) Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 153-157. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Hassan, Nurul and Jaffar, Abdul Hassan and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2019) Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 147-152. ISSN 2277-3878 E-ISSN 2249-8958

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. (2019) Conflicts and delays in mega construction projects – Kuwait International Airport Cargo City. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 927-939. ISSN 2249 - 8958

Revichandran, Rajeanderan and Mohiuddin, A. K. M. (2019) Two-phase thermosyphon filled with R410A refrigerant operating at low evaporator temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 9-20. ISSN 2289-7879

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Experimental investigation of straight shape thermosyphon filled with R410A refrigerant. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 271-278. ISSN 2088-5334 E-ISSN 2460-6952

Rahman, Mohammed Ataur and Mohammed, Azri and Kyaw, Myo Aung and Ismail, Ahmad Faris and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2018) Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3). pp. 139-151. ISSN 1308-772X

Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655

Rahman, Mohammed Ataur and Amsyar, Mohamad and Ihsan, Sany Izan and Mohiuddin, A. K. M. (2018) Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018. pp. 1-9. ISSN 1812-5654 E-ISSN 1812-5662 (In Press)

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Norhamzan, Norainnatul Husna (2018) A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel. International Journal of Applied Engineering Research, 13 (5). pp. 2541-2544. ISSN 0973-4562 E-ISSN 0973-9769

Mohiuddin, A. K. M. and Sabarudin, Mohamad Syabil and Khan, Ahsan Ali and Ihsan, Sany Izan (2017) Design and development of hybrid energy generator (photovoltaics) with solar tracker. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-6. E-ISSN 1757-899X

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X

Mohiuddin, A. K. M. and Amer, Muhammad Yazid and Rahman, Mohammed Ataur and Khan, Ahsan Ali (2017) Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655

Eshteyah, Mohanna and Hrairi, Meftah and Mohiuddin, A. K. M. (2016) Clinching process for joining dissimilar materials: state of the art. The International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 179-195. ISSN 0268-3768 E-ISSN 1433-3015

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal, 16 (2). pp. 57-68. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2015) Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal, 16 (2). pp. 69-78. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Rahman, Mohammed Ataur and Razzak, Fadhilah and Rafia, Afroz and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews, 51. pp. 382-395. ISSN 1364-0321

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2015) Large eddy simulation for transesterification of waste vegetable oil. IIUM Engineering Journal, 16 (1). pp. 53-79. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and A. Jabar, Julia (2015) Adoption and adaptation of Japanese manufacturing management in an automotive company of Malaysia. Advanced Materials Research, 1115. pp. 589-595. ISSN 1022-6680

Mohiuddin, A. K. M. (2015) Development of catalytic converter using non-precious metals. Advanced Materials Research, 1115. pp. 462-467. ISSN 1022-6680

Eshteyah, Mohanna and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim and Mohiuddin, A. K. M. (2015) Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115. pp. 109-112. ISSN 1022-6680

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Abdullah, Hanani (2015) Painting process improvement through six sigma approach in a Malaysian vehicle assembly company. Advanced Materials Research, 1115. pp. 596-600. ISSN 1022-6680

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2014) Design and investigation of a fuel cell car prototype. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 321-333. ISSN 1745-6444 (O), 1745-6436 (P)

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Rashid, Muhammad Mahbubur and Hossain, Altab (2014) Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology, 28 (4). pp. 1153-1160. ISSN 1738-494X E-ISSN 1976-3824

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2013) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 217-225. ISSN 1755-9766

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Mohd Nor, Mohd Iskandr (2013) CFD modeling of waste cooking oil transesterification in a stirred tank reactor. World Applied Sciences Journal , 21. pp. 151-158. ISSN 1818-4952

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Hossain, Altab and Alam, A. H. M. Zahirul (2012) Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology, 26 (7). pp. 1-9. ISSN 1738-494X E-ISSN 1976-3824

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2012) Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research, 445. pp. 899-904. ISSN 1662-8985

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ramesh, Singh (2012) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), 19 (4). pp. 407-426. ISSN 1744-232X E-ISSN 1741-5152

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Husaini, Muhamad and Jameel, Ahmed Tariq (2012) Mixed-flow impeller characteristics in baffled mixing tank. Advanced Materials Research, 576. pp. 154-161. ISSN 1022-6680

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Mirghani, Mohamed Elwathig Saeed and Jameel, Ahmed Tariq (2012) Unconventional method for monitoring of waste cooking oil transesterification. Advanced Materials Research, 576. pp. 357-361. ISSN 1022-6680

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Arfah, A, and Farraen, M.A. (2011) Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 202-218. ISSN 1745-6444 (O), 1745-6436 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology, 12 (5). pp. 745-753. ISSN 1229-9138 (Print), 1976-3832 (Online)

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Waste cooking oil transesterification: influence of impeller type, temperature, speed and bottom clearance on FAME yield. African Journal of Biotechnology, 10 (44). pp. 8914-8929. ISSN 1684–5315

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Haw Shin, Yap (2011) Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research, 265. pp. 1719-1724. ISSN 1022-6680

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 721-734. ISSN 0954-4070

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Performance measurement of a tracked vehicle system. International Journal of Automotive Technology, 12 (4). pp. 503-512. ISSN 1229-9138

Nabeel Adedapo, Adeyemi and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Biodiesel production: a mini review. International Energy Journal (IEJ), 12 (1). pp. 15-27. ISSN 1513-718X

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75. pp. 50-57. ISSN 2010-376X

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology, 25 (4). pp. 1035-1041. ISSN 1976-3824 (O), 1738-494X (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics. ISSN 0022-4898

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmad Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3). pp. 227-244. ISSN 1741-5152 (O), 1744-232X (P)

Mohiuddin, A. K. M. (2011) Investigation of the Swirl Effect on Engine Using Designed Swirl Adapter. IIUM Engineering Journal, 12 (3). pp. 201-209. ISSN 1511-788X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2011) A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV), 3 (1). pp. 47-61. ISSN 1751-4096 (O), 1751-4088 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering, 4 (5). pp. 10-17. ISSN 1934-8975

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 (1). pp. 45-54. ISSN 0022-4898

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering, 4 (1). pp. 288-295. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2010) Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing, 5 (2/3). pp. 237-253. ISSN 1745-6444 (O), 1745-6436 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology, 62. pp. 163-169. ISSN 1307-6884

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Yahya, Azmi (2009) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp. 63-71. ISSN 1874-155X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2009) Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 16 (1/2). pp. 225-242. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2009) Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal, 3. pp. 15-28. ISSN 1874-4478

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2008) Experimental analysis of noise and back pressure for muffler design. Jurnal Kejuruteraan, 20. pp. 151-161.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME), 3 (2). pp. 176-186. ISSN 1823-0334

Mohiuddin, A. K. M. and Saidur, R. and Sattar, M.A. and Rahman, Mohammed Ataur (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513-718X

Mohiuddin, A. K. M. and ., Muhamamd Nurhafez (2007) Experimental analysis and comparison performance characterisation of catalytic converters including simulation. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 1-7. ISSN 1823-0334

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2007) Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 189-199. ISSN 1823-0334

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2007) Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221. pp. 789-800. ISSN 0954-4070

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Mohd Subri, Mohd Dzaidin (2007) Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 40-47. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 118-124. ISSN 1823-0334

Abdul Hakim, Saidur Rahman and Md., Hasanuzzaman and Abdul Sattar, M. and Hassan, Masjuki and Magami, Irfan Anjum and Mohiuddin, A. K. M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 84-92. ISSN 1823-0334

Mohiuddin, A. K. M. and Wee Hock, Quik (2005) Collaborative technologies in new factory's certification process. Journal of Applied Sciences, 5 (2). pp. 267-272. ISSN 1812-5662 (O), 1812-5654 (P)

Mohiuddin, A. K. M. (2005) Experimental study in a spray filled tower for flow visualization and drift eliminators characteristics. Journal of Applied Sciences, 5 (2). pp. 284-291. ISSN 1812-5662 (O), 1812-5654 (P)

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2005) Experimental study of noise and back pressure for silencer design characteristics. Journal of Applied Sciences, 5 (7). pp. 1292-1298. ISSN 1812-5662 (O), 1812-5654 (P)

Ahmed, Shamsuddin and Mohiuddin, A. K. M. (2005) The successful implementation of TPM in conjunction with EOM and 5S: a case presentation. Journal of Applied Sciences, 5 (5). pp. 938-951. ISSN 1812-5662 (O), 1812-5654 (P)

Mohiuddin, A. K. M. and Kant, K. (1997) Optimal thermal design of wet cooling towers. Journal of The Institution of Engineers, Singapore, 37 (6). pp. 31-34. ISSN 0377-7464

Mohiuddin, A. K. M. and Kant, Keshav and Sangal, Rajeev (1996) ESTOWER: an expert system for the thermal design of wet cooling towers. Engineering Applications of Artificial Intelligence, 9 (2). pp. 185-194. ISSN 0952-1976

Mohiuddin, A. K. M. and Kant, K. (1996) Knowledge base for the systematic design of wet cooling towers. Part I: Selection and tower characteristics. International Journal of Refrigeration, 19 (1). pp. 43-51. ISSN 0140-7007

Mohiuddin, A. K. M. and Kant, K. (1996) Knowledge base for the systematic design of wet cooling towers. Part II: Fill and other design parameters. International Journal of Refrigeration, 19 (1). pp. 52-60. ISSN 0140-7007

Singh, A. K. and Mohiuddin, A. K. M. and Kant, Keshav (1993) Characteristics of drift eliminators of an evaporative condenser. Journal of Energy, Heat and Mass Transfer , 15. pp. 331-337. ISSN 0970-9991

Mohiuddin, A. K. M. and Kant, Keshav and Sen, Subroto (1992) An experimental study on packing and drift eliminators in an evaporative condenser with induced draft. Indian Journal of Technology, 30. pp. 507-511. ISSN 0019-5669

Mohiuddin, A. K. M. and Kant, Keshav (1992) Cooling tower: an energy conservation resource. Journal of the Institution of Engineers, Bangladesh, 20 (1-2). pp. 63-68. ISSN 1993-8128

Mohiuddin, A. K. M. and Kant, Keshav (1991) Analysis of mechanical draft wet cooling towers. Journal of Energy, Heat and Mass Transfer , 13. pp. 165-187. ISSN 0970-9991

Book

Mohiuddin, A. K. M. and Hoda, Asif , eds. (2011) Alternative energy. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, 0-1. ISBN 9789674181581

Mohiuddin, A. K. M., ed. (2011) Engine and auxiliary systems. IIUM Press, International Islamic University Malaysia, Kuala Lumpur. ISBN 978-967-418-216-8

Book Chapter

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – Part I: design. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 42-47. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) 2nd generation IIUM buggy car – part II: fabrication. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 48-59. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mohd Sood, Anwar (2011) 3-Cylinder gasoline direct injection as opposed to 4-cylinder multi-port fuel injection for lower fuel consumption and NOX emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Alternative mixing strategy for biodiesel production: mixed flow impeller characterization. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 188-196. ISBN 9789674181581

Ihsan, Sany Izan and Sulaiman , Nabila and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 140-146. ISBN 9789674181581

Ihsan, Sany Izan and Farid, Khairussani and Mel, Maizirwan and Mohiuddin, A. K. M. (2011) Analysis of engine performance with enhanced fuel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 147-155. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohammed Zayan, Jalal (2011) Automotive catalytic converters : current status and some future perspectives. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 80-85. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of combustion characteristics using Jatropha oil methyl esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 262-268. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of emission characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative Energy. IIUM Press, Kuala Lumpur, pp. 74-78. ISBN 9789674181581

Mohiuddin, A. K. M. and Mohd, Azan (2011) Comparative study of performance characteristics using Jatropha Oil Methyl Esters biodiesel and diesel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181581

Mohiuddin, A. K. M. and Faiz, Ali (2011) Comparison of various types of powertrain used in automotive vehicles in terms of performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-216-8

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and -, Irwan and -, Azoa and -, Adly (2011) Design and development of an automatic car door opening and locking system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789670225685

Mohiuddin, A. K. M. (2011) Development of low cost catalytic converter from non-precious metals. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 123-130. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Exhaust system optimization using GT- Power. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 21-28. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis and comparison of performance characteristics of catalytic converters. In: Engine and auxiliary system. IIUM Press, Kuala Lumpur, pp. 1-7. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis and simulation of catalytic converters. In: Engine and auxiliary systems. IIUM Press, Kuala Lumpur, pp. 8-13. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part I: Muffler design requirements. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 29-35. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Experimental analysis to determine the relationship between noise and back pressure for muffler design – Part II: Experimental results. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 36-41. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Flow characteristic of mixing impeller for liquid-liquid mixing. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 85-90. ISBN 9789674181581

Mohiuddin, A. K. M. (2011) Investigation of engine performance using designed swirl adapter. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 67-73. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - Part II: performance and emission. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 101-108. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2011) Investigation of spark ignition multipoint engine using water addition - part I : simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 92-100. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Preliminary investigation of biodiesel reactor optimization using combine CFD-Taguchi method. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 179-187. ISBN 9789674181581

Mohiuddin, A. K. M. and Yap, Haw Shin (2011) Robust design optimization of valve timing using multi-objective genetic algorithm (MOGA). In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 53-59. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. (2011) Solar energy management for poverty alleviation and income generating activities. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 91-96. ISBN 9789674181581

Mohiuddin, A. K. M. (2011) Thermal design of mechanical devices using expert system. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 14-20. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part I: simulation. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 109-115. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Zahari, Izzarief and Aiman, Abdullah (2011) Thermodynamic analysis of combustion of CAMPRO CFE engine – part II: combustion analysis. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 116-122. ISBN 978-967-418-216-8

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Husaini, Muhamad (2011) Turbulence model for axial mixing impeller in unbaffled vessel. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 97-102. ISBN 9789674181581

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2011) Waste cooking oil utilization for biodiesel production. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 79-84. ISBN 9789674181581

Mohiuddin, A. K. M. and Ihsan, Sany Izan and Abd Murat, Noor Azammi (2011) A study of an aftermarket voltage stabilizer for its performance and emission on passengers vehicle. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 60-66. ISBN 978-967-418-216-8

Conference or Workshop Item

Ihsan, Sany Izan and Mohiuddin, A. K. M. and Syed Abu Bakar, Syed Noh and Rosili, Sarah Shamila (2019) Experimental study on low temperature power generator. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Abdul Latif, Muhammad Alif (2018) Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Basran, Norasyikin and Khan, Ahsan Ali (2018) Modelling and validation of proton exchange membrane fuel cell (PEMFC). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 Aug 2017, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Mohiuddin, A. K. M. and Abdul Jabar, Julia and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2017) Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan (2017) Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ihsan, Sany Izan and Safian, M. A. I. M. and Taufek, M. A. M. and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Hanash, Ebrahim and Karim, A.N. Mustafizul and Tuan, SaravananTanjong and Mohiuddin, A. K. M. (2017) Throughput enhancement of car exhaust fabrication line by applying MOST. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Mokhtar, Hannan (2016) The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015), 6th-9th Dec. 2015, Singapore.

Mohiuddin, A. K. M. and Julia , Abdul Jabar (2015) Performance improvement of local automotive industry by adopting JMM. In: International Conference on Mechanical Engineering 2015 (ICME 2015), 18 - 20 December, 2015, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and Julia , Abdul Jabar (2014) Adoption and adaptation of Japanese manufacturing management: a case study of an automotive company in Malaysia. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. (2014) Development of catalytic converter using low cost metal. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2014) Large eddy simulation modelling for transesterification of waste vegetable oil. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Hanani, Abdullah (2014) Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2014) Modelling and simulation of spark ignition engine using water addition and validated through experimental envestigations. In: The 5th IASTED International Conference on Modelling, Simulation and Identification (MSI 2014), 16-18 July 2014, Banff, Canada.

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2013) Numerical simulation of biodiesel production using waste cooking oil. In: ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE 2013), 15-21 Nov 2013, San Diego, CA, USA.

Mohiuddin, A. K. M. and Adeyemi, Nabeel and Muyibi, Suleyman (2013) 3-D CFD transient simulation of transesterification in stirred tank reactor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2013) Design and Development of a Fuel Cell Car Prototype. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Jameel, Ahmed Tariq (2012) Numerical modelling of mixed flow impeller in stirred vessel. In: ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, 9-15 November 2012, Houston, Texas, USA.

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and A. Aziz, A. Rashid and Anbese, Yohannes Tamirat and F., Firmansyah and Husaini, Muhamad (2012) CFD simulation of biodiesel production using mixed flow impeller in baffled and unbaffled stirred vessel. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012), 3 - 5 July 2012, Kuala Lumpur, Malaysia.

Ihsan, Sany Izan and Farid, Khairussani and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with enhanced fuel. In: 3rd (2011) CUTSE International Conference, 8-9 November 2011, Miri, Sarawak, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011, 19 - 21, October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand. (Unpublished)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.

Sulaiman, Nabila and Ihsan, Sany Izan and Mohiuddin, A. K. M. and Mel, Maizirwan (2011) Analysis of engine performance with NGV. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-20 May, 2011, Legend Hotel, Kuala Lumpur, Malaysia.

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Abd Aziz, Abd Rashid and F., Firmansyah and Anbese, Yohannes Tamirat (2011) Analysis of mixing in stirred vessels using CFD: waste cooking oil transesterification. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Legend Hotel, Kuala Lumpur.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2011) Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2011) Waste cooking oil transesterification: influence of impeller type, speed and bottom clearance on fame yield. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition, April 2011, Detroit, MI, USA.

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Mirghani, Mohamed Elwathig Saeed and Aibinu, Abiodun Musa and Aziz, Rashid A. and Firmansyah, F. and Anbese, Yohannes Tamirat (2011) Simulation and experimental validation: waste cooking oil transesterification using rushton and elephant ear impellers. In: The IASTED International Conference on Modelling, Simulation, and Identification (MSI 2011), 7-9 Nov 2011, Pittsburgh, USA.

Mohiuddin, A. K. M. and Hossain, Altab and Rahman, Mohammed Ataur and Aminanda, Yulfian (2010) Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 , 12-18 November, 2010, Vancouver, British Columbia, Canada.

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2010) Biodiesel reactor optimization using combined CFD-Taguchi method. In: International Postgraduate Conference on Engineering (IPCE 2010), 16-17 October, 2010, Perlis, Malaysia.

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Jameel, Ahmed Tariq (2010) Hydrodynamic effects during waste cooking oil transesterification using CFD. In: ICIEBM, International Conference on Industrial Engineering and Business Management 2010, 12-13 October, 2010, Yogyakarta, Indonesia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian and Muhidin, Arifin (2010) Development of an intelligent air-cushion system for a swamp tracked vehicle. In: 33rd FISITA World Automotive Congress 2010, 30 May - 4 June 2010, Budapest, Hungary.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Shaari, Norazean and Arif, Mohd and Iqbal, A.K.M.P. and Hassan, Khairul (2010) Finite element method for the study of air-cushion tracked vehicle-terrain interaction. In: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010), 23-24 Dec 2010, Khulna, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, Parvez and Muhidin, Arifin and Mohamad, Mazian (2009) Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladeh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009, 4-5 May, 2009, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009), 8-11 December 2009, Hong Kong.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Irwan, I. and Azoa, A. and Adly, A. (2008) Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Hossain, Altab and Mohiuddin, A. K. M. (2008) Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29th December 2008, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, A.K.M. P. (2008) Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Probable solution of torque dip problem of CAMPRO 1.6L engine. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Ashour, Ahmed Aly Ibrahim Shaaban and Yap, Haw Shin (2008) Design optimization of valve timing at various engine speeds using Multi-Objective Genetic Algorithm (MOGA). In: 19th IASTED International Conference Modelling and Simulation, 26 - 28 May, 2008, Quebec City, Quebec, Canada.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and M. A, Farraen (2008) Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2008) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008, July 2008, Germany.

Sattar, M.A. and Saidur, R. and Masjuki, H.H. and Mohiuddin, A. K. M. (2007) Energy and thermodynamic performance of refrigerator using pure hydrocarbon and mixture of hydrocarbons as refrigerants. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Noraini, N. and Irwan, I. (2007) Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Nursyifa, S. and Nora, A. and Hidayah, N. and Eshah, J. (2007) A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29 - 31 December, 2007, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Dzaidin, Mohd. (2006) Design and development of automobile exhaust system using GT-power. In: 3rd BSME-ASME International Conference on Thermal Engineering, 20-22 December, 2006, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Quick, Wee Hock (2006) Facility and maintenance engineering for new factory’s certification process. In: The1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Materials Processing (ICMM2006), 14-15 March, 2006, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Nurhafez, Muhammad (2005) Analysis and comparison of performance characteristics of catalytic converters. In: International Conference on Mechanical Engineering 2005 (ICME 2005), 28-30 December, 2005, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Nurhafez, Muhammed (2005) Experimental investigation and simulation of catalytic converter performance. In: 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2005), 19 - 22 September, 2005, Cairo, Egypt.

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2005) Muffler design optimization through experimental analysis of noise and back pressure. In: The 2nd International Conference on Mechatronics (ICOM'05), 10-12 May, 2005, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Quick, Wee Hock (2004) Accelerated new factory certification using CE methodology. In: 2nd International Industrial Engineering Conference (IIEC-2004), 19-21 December, 2004, Riyadh, Kingdom of Saudi Arabia.

Mohiuddin, A. K. M. and Quick, Wee Hock (2004) New factory's certification process – Use of collaborative technologies as a tool. In: 4th International Mechanical Engineering Conference & 9th Annual Paper Meet, 29-31 December 2004, Dhaka, Bangladesh.

Mohiuddin, A. K. M. (2004) Experimental study of drift eliminators in a spray filled tower. In: 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2004), 21-24 June, 2004, Cape Town, South Africa.

Mohiuddin, A. K. M. and Quick, Wee Hock (2004) Establishing new factory with technology certification roadmap. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), 11-13 May, 2004, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. (2003) Artificial intelligence - A tool for thermal design of cooling towers. In: 2nd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT 2003), 24-26 June, 2003, Victoria Falls, Zambia.

Mohiuddin, A. K. M. (2003) Expert system for the thermal design of mechanical devices. In: The 7th IEEE International Conference On Intelligent Engineering Systems (INES 2003), March 4 - 6, 2003, Assiut - Luxor, Egypt.

Mohiuddin, A. K. M. (2002) Solar energy management for poverty alleviation and income generating activities in rural areas. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Mohiuddin, A. K. M. (2002) An experimental study on spray filled tower. In: BSME-ASME International Conference on Thermal Engineering, 31 December 2001 - 2 January 2002, Dhaka, Bangladesh.

Islam, M. Serajul and Monde, M. and Hino, R. and Huq, A.M.A. and Mohiuddin, A. K. M. (1997) Heat transfer augmentation in Rib-Roughened Narrow channels with one-sided heating. In: Second International Seminar on Fluid Mechanics and Heat Transfer, December 17-18, 1997, Dhaka, Bangladesh.

Mohiuddin, A. K. M. (1996) Energy conservation through optimal design of cooling towers. In: Third Annual Paper Meet, The Institution of Engineers, Bangladesh, 31 October - 2 November 1996, Dhaka, Bangladeh.

Monograph

Mohiuddin, A. K. M. (2012) The hybrid car with waste gas recovery. Research Report. s.n, Kuala Lumpur. (Unpublished)

This list was generated on Sun Oct 20 09:38:59 2019 +08.