IIUM Repository (IREP)

Study on the development of a fuzzy logic control electromagnetic actuated CVT system

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

[img]
Preview
PDF (International Conference Paper) - Published Version
Download (668kB) | Preview

Abstract

This paper conducts the preliminary research of an Electromagnetic Actuated Continuously Variable Transmission (EMA-CVT) system of quarter scale. An EMA-CVT system is consisted of two pairs of electromagnetic actuators (solenoid)attached with primary and secondary pulley in order to develop the attraction and repulsive forces. The relationships between the speed ratio and electromagnetic actuation and clamping force and output torque of the CVT are established based on the kinematics of the EMA-CVT system. This study also focused on fuzzy logic based controller (FLC) to precise control for pushing and pulling the sheaves based on the feedback of the RPM sensor and slope sensor. The EMA-CVT performance with controller is 28% more than that of the EMA-CVT without controller. The solenoids of the EMA were activated by varying the current supply with the Fuzzy-Proportional-Derivative-Integrator (FPID)to maintain the non-linearity of the CVT in response of the vehicle traction torque demand. Result shows that the solenoid able to pull the plunger in the desired distance with supply current of 12.5 amp while push the plunger to the desired distance with 14.00 amp current supply to the windings when the vehicle is considered in 10% grad. The acceleration time of the ¼ scale car has been recorded as 5.5 s with the response of drive wheels torque.

Item Type: Conference or Workshop Item (Full Paper)
Additional Information: 5264/1356
Uncontrolled Keywords: EMA-CVT, fuzzy logic controller, fuzzy-proportional-derivative-integrator, accelerating time, transmission loss
Subjects: T Technology > T Technology (General)
T Technology > TJ Mechanical engineering and machinery > TJ212 Control engineering
Kulliyyahs/Centres/Divisions/Institutes: Kulliyyah of Engineering > Department of Mechanical Engineering
Depositing User: Prof. Dr. A K M Mohiuddin
Date Deposited: 16 Aug 2011 09:22
Last Modified: 17 Aug 2011 09:07
URI: http://irep.iium.edu.my/id/eprint/1356

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year