Items where Author is "Ismail, Ahmad Faris"
 | Up a level |
Article
Rahman, Mohammed Ataur and Ihsan, Sany Izan and Ismail, Ahmad Faris and Altab, Hossain (2024) Fuel cell hybrid electric air-cushion tracked vehicle for peat swamp. International Journal of Heavy Vehicle System, 31 (4). pp. 513-530. ISSN 1744-232X E-ISSN 1741-5152
Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil and Mohd Azmi, Mohd Syahriman (2023) Mathematical model development of evacuated glass-thermal absorber tube Collector (EGATC) for air heating application. Journal of Science And Mathematics Letters, 11 (1). pp. 73-82. ISSN 2462-2052 E-ISSN 2600-8718
Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2023) A study on accuracy range of multiphase mixture model for turbulent convective heat transfer enhancement simulation of Water-Al2O3 Nanofluid. Journal of Nanofluids, 12 (2). pp. 438-447. ISSN 2169-432X E-ISSN 2169-4338
Al Mahmud, Suaib and Rahman Khan, Mazbahur and Ibne Noor, Wazed and Ismail, Ahmad Faris and Momin, Md. Abdul and Bappy, Jamirul Habib (2022) Turbulent convective heat transfer enhancement modeling of water-Al2O3 nanofluid using CFD mixture model and adaptive neural fuzzy inference system. numerical heat transfer, part b: fundamentals. pp. 1-19. ISSN 1040-7790 E-ISSN 1521-0626 (In Press)
Zayan, Jalal Mohammed and John, Akbar and Rasheed, Abdul Khaliq and Alallam, Batoul and Khalid, Mohammed and Ismail, Ahmad Faris and Nelson, Bryan Raveen and Salleh, Hamzah Mohd. (2022) Earlier denaturation of DNA by using novel ternary hybrid nanoparticles. IIUM Engineering Journal, 23 (2). pp. 237-245. ISSN 1511-758X E-ISSN 2289-7860
Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2022) Experimental investigation of integrated energy storage on thermal performance enhancement of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 137-152. ISSN 2289-7879
Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2022) Performance analysis of flat plate base-thermal cell absorber (FPBTCA): low thickness design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 122-133. ISSN 2289-7879
Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Application of TRIZ to modify oven drying for SMEs to maintain the eugenol content in dried cloves. Eastern-European Journal of Enterprise Technologies, 2 (1 (116)). pp. 47-54. ISSN 1729-3774 E-ISSN 1729-4061
Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Conduction heat transfer on the porous media in the gap with heater from below. International Journal of Engineering Materials and Manufacture, 7 (2). pp. 43-53. E-ISSN 0128-1852
Warimani, Mahammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal and Chavan, Vijaykumar (2022) Analytical assessment of blended fuels for pulse detonation engine performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 1-16. ISSN 2811-3950
Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2022) Effects of operating conditions on evaporation rate and wall shear stress development in a micro-gap heat sink with internal micro-fins. CFD Letters, 14 (2). pp. 1-9. ISSN 2811-3969
Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2022) Mixture model for a parametric study on turbulent convective heat transfer of water-Al2O3 nanofluid. CFD Letters, 14 (2). pp. 42-58. ISSN 2811-3969
Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Topa, Ameen and Ismail, Ahmad Faris (2022) Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1). pp. 412-423. ISSN 1511-788X E-ISSN 2289-7860
Zayan, Jalal Mohammed and Rasheed, Abdul Khaliq and John, Akbar and Khalid, Mohammad and Ismail, Ahmad Faris and Aabid, Abdul and Baig, Muneer (2021) Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and Taguchi method. Materials, 15 (1). E-ISSN 1996-1944
Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2021) Thermal resistance and pressure drop minimization for a micro-gap heat sink with internal micro-fins by parametric optimization of operating conditions. CFD Letters, 13 (12). pp. 100-112. ISSN 2180-1363
Al Mahmud, Suaib and Ismail, Ahmad Faris (2021) Multiphase CFD investigation on convective heat transfer enhancement for turbulent flow of water-Al2O3Nanofluid. CFD Letters, 13 (10). pp. 11-24. ISSN 2180-1363
Yang, Chuan Choong and Noor Hanafi, Noor Fiqri Razqi and Mohamad Hanif, Noor Hazrin Hany and Ismail, Ahmad Faris and Chang, Hsueh-Hsien (2021) A novel non-intrusive vibration energy harvesting method for air conditioning compressor unit. Sustainability, 13 (18). E-ISSN 2071-1050
Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris and Saharin, Sanisah and Ariffin, Ahmad Kamal (2021) Internal flow dynamics and performance of pulse detonation engine with alternative fuels. Energy, 237. pp. 1-10. ISSN 0360-5442
Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Aslfattahi, Navid and Saidur, R. (2021) Static and dynamic combined effects on the thermal conductivity of water based Ironoxide Nanofluids: experiments and theories. Smart Science, 9 (2). pp. 133-146. ISSN 2308-0477
Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil (2021) Investigation on the thermal performance of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 48-64. ISSN 2289-7879
Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2021) Effect of exfoliated graphene on thermal conductivity enhancements of graphene-ironoxide hybrid nanofluids: Experimental investigation and effective medium theories. Journal of Nano Research, 67. pp. 97-114. ISSN 1661-9897
Haseeb, Shariq and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Ismail, Ahmad Faris (2020) Performance analysis of constrained device virtualization algorithm. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (5). pp. 532-539. ISSN 2278-3075
Mamun, Abdullah Al and Muthalif, Asan G. A. and Ahmad, Zuraida and Ismail, Ahmad Faris and Ismail, Kamsiah and Maleque, Md. Abdul (2020) Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2). pp. 355-361. ISSN 2332-3205 E-ISSN 2332-3213
Rahat, Arifutzzaman and Ismail, Ahmad Faris and Khan, Ahsan Ali and Alam, Md Zahangir and Rahman, Saidur (2020) Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology, 29 (1). pp. 1326-1333. ISSN 2005-4238 E-ISSN 2207-6360
Kathri, Naveed and Darsivan, Fadly Jashi and Waleed Fekry, Faris and Ismail, Ahmad Faris (2020) Fatigue life study of suspension ball joints on the basis of ride quality. International Journal of Vehicle Noise and Vibration, 16 (1/2). pp. 69-84. ISSN 1479-1471 E-ISSN 1479-148X
Fauzi, Fatin Bazilah and Ismail, Edhuan and Syed Abu Bakar, Syed Noh and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Md Din, Muhammad Faiz and Illias, Suhaimi and Ani, Mohd Hanafi (2019) The role of gas-phase dynamics in interfacial phenomena during few-layer graphene growth through atmospheric pressure chemical vapour deposition. Physical Chemistry Chemical Physics, 22 (6). pp. 3481-3489. ISSN 1463-9076 E-ISSN 1463-9084
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879
Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958
Arifutzzaman, A and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2019) Investigation of extraction yields of exfoliated graphene in deionized water from organic solvents. International Journal of Technology, 10 (6). pp. 1251-1259. ISSN 2086-9614
Rahman, Mohammed Ataur and Mohammed, Azri and Kyaw, Myo Aung and Ismail, Ahmad Faris and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2018) Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3). pp. 139-151. ISSN 1308-772X
Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) An analytical technique to obtain higher-order approximate periods for the nonlinear oscillator. IIUM Engineering Journal, 19 (2). pp. 182-191. ISSN 1511-788X E-ISSN 2289-7860
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851
Rahman, Mohammed Ataur and Saifullah, Khalid and Sany, Ihsan and Aung, Kyaw Myu and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research, 36 (3). pp. 185-204. ISSN 1308-772X
Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X
Abdeen, Fouad RH and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2018) Improvement of biogas upgrading process using chemical absorption at ambient conditions. Jurnal Teknologi, 80 (1). pp. 107-113. ISSN 0127-9696 E-ISSN 2180–3722
Rahat, Arifutzzaman and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Mohammad, Zahangir Alam (2018) Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids. International Journal of Applied Engineering Research, 13 (7). pp. 4871-4877. ISSN 0973-4562 E-ISSN 0973-9769
Arifutzzaman, A. K. H. A. Ma and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Alam, Md. Zahangir (2018) Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids. International Journal of Applied Engineering Research, 13 (10). pp. 7477-7487. ISSN 0973-4562
Rahman, Mohammed Ataur and Rahman, Shaik Mizanur and Ismail, Ahmad Faris and Ihsan, Sany Izan (2018) Power optimisation of electric coaster. International Journal of Electric and Hybrid Vehicles, 10 (1). pp. 82-94. ISSN 1751-4088 E-ISSN 1751-4096
Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Putra, Azma and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Musthafah, Mohd Tahir (2018) Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing, 22 (18). pp. 5955-5964. ISSN 1432-7643 E-ISSN 1433-7479
Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ahmad, Kartini and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics, 7. pp. 3962-3967. E-ISSN 2211-3797
Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X
Zaidon, Nuradawiyah and Mohd Mansor, Ahmad Fairuzabadi and Wing, Cheung Mak and Ismail, Ahmad Faris and Nordin, Anis Nurashikin (2017) Microfluidic concentration gradient for toxicity studies of lung carcinoma cells. Procedia Technology, 27. pp. 153-154. ISSN 2212-0173
Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics, 37. pp. 455-466. ISSN 1126-8042
Bashir, Musavir and Baig, Maughal Ahmed Al and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Control of suddenly expanded flows from correctly expanded and under expanded nozzles at supersonic mach number for area ratio 2.56. IOSR journal of Mechanical & Civil Engineering, 3. pp. 76-82. ISSN 2320-334x E-ISSN 2278-1684
Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 1-4. ISSN 2320-334x E-ISSN 2278-1684
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. (2016) Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC). pp. 6-13. E-ISSN 2289-9855
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4. pp. 18-25. E-ISSN 2289-9855
Ahmad, Zuraida and Zain, Saidi and Ismail, Ahmad Faris and Salleh, Md. Noor and Machouche, Salah (2016) Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4. pp. 1-7. E-ISSN 2289-9855
Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) A review of chemical absorption of carbon dioxide for biogas upgrading. Chinese Journal of Chemical Engineering, 24 (6). pp. 693-702. ISSN 1004-9541
Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608
M., Norfahana and Ismail, Ahmad Faris and Majid, Z. A. A. (2016) An evaluation of heat loss on top of solar collector with multilayered absorber in solar water heating system. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 281-285. ISSN 1819-6608
Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Awang, Ardika Ridal (2016) Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling and Simulation in Engineering, 2016. 5072404-1-5072404-12. ISSN 1687-5591 E-ISSN 1687-5605
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562
Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator. Global Journal of Pure and Applied Mathematics, 12 (3). pp. 2721-2732. ISSN 0973-1768 E-ISSN 0973-9750
Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6. pp. 496-504. ISSN 2211-3797
Mohamed, Norhafana and Ismail, Ahmad Faris and Abdul Majid, Zafri Azran (2015) Performance evaluation of solar collectors using a solar simulator. IIUM Engineering Journal, 6 (2). pp. 79-90. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2015) Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal, 16 (2). pp. 31-42. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar (2015) The study on performance of naturally aspirated spark ignition engine equipped with waste heat recovery mechanism. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10058-10065. ISSN 1819-6608
Walvekar, Rashmi and Siddiqui, Mohammad Khalid and Ong, SeikSan and Ismail, Ahmad Faris (2015) Application of CNT nanofluids in a turbulent flow heat exchanger. Journal of Experimental Nanoscience, 11 (1). pp. 1-17. ISSN 17458080
Mel, Maizirwan and Nadiah, Mohd Suhuli and Avicenna, Avicenna and Ihsan, Sany Izan and Ismail, Ahmad Faris and Yaacob , Sharifah (2015) Effect of organic loading rate (OLR) of slurry on biogas production quality. Advanced Materials Research, 1115 . pp. 325-330. ISSN 1022-6680
Rashmi, Walvekar and Siddiqui, Mohammad Khalid and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2015) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience, 10 (7). pp. 545-563. ISSN 1745-8099
Ahmad, Zuraida and Halim, Zahurin and Mohamad, Souad A. and Salleh, Md. Noor and Ismail, Ahmad Faris (2014) Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore, 26 (5). pp. 2569-2575. ISSN 1013-5316
Rashmi, W. and Ismail, Ahmad Faris and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 0022-2461 E-ISSN 1573-4803
Ismail, Ahmad Faris and Anuar, Asnida and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Corrosion effects of CNT-nanofluids on different metals. WIT Transactions on Engineering Sciences, 87. pp. 139-146. ISSN 1743-3533
Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Putra, Azma and Ismail, Ahmad Faris (2014) Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering. 240942-1-6. E-ISSN 2090-5130
Ismail, Ahmad Faris and Abd-Halim, B.A. and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Smaller radiator with enhanced heat transfer using CNT-nanofluids. WIT Transactions on Engineering Sciences, 88. pp. 185-191. ISSN 1743-3533
Lwas, Ali K. and Islam, Md. Rafiqul and Chebil, Jalel and Habaebi, Mohamed Hadi and Ismail, Ahmad Faris and Zyoud, Al-Hareth and Dao, Hassan (2013) Rain attenuation analysis using synthetic storm technique in Malaysia. IOP Conference Series: Materials Science and Engineering, 53 (Conf.1). 012045-1. ISSN 1757-8981
Abdul Aziz, Hassanuddeen and Nordin, Mohamad Sahari and Ismail, Ahmad Faris (2013) Academic performance measurement: capacity building for OIC-Affiliated Universities. International Journal of Information Technology & Computer Science, 12 (2). pp. 67-74. ISSN 2091-1610
Rashmi, W. and Khalid, M. and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2013) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience, 10 (7). pp. 1-19. ISSN 1745-8099
Ahmad, Zuraida and Othman, Raihan and Ismail, Ahmad Faris (2012) Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences, 6 (5). pp. 625-632. ISSN 1995-0772
Amir, Ahmad N. and Shuriye, Abdi Omar and Ismail, Ahmad Faris (2012) Muhammad Abduh’s contributions to modernity. Asian Journal of Management Sciences & Education (AJMSE), 1 (1). pp. 63-75. ISSN 2186-845X (O), 2186-8441 (P)
Walvekar, Rashmi Gangasa and Ismail, Ahmad Faris and Khalid, Mohammad (2012) Thermal conductivity of carbon nanotube nanofluid—experimental and theoretical study. Heat Transfer—Asian Research, 41 (2). pp. 145-163. ISSN 1099-2871
Al-Khateeb, Khalid A. Saeed and Mustafa, Ammar A. and Ismail, Ahmad Faris and Sutjipto, Agus Geter Edy (2012) Use of porous alumina bioceramic to increase implant osseointegration to surrounding bone. Advanced Materials Research, 445. pp. 554-559. ISSN 1022-6680
Amir, Ahmad N. and Shuriye, Abdi Omar and Ismail, Ahmad Faris (2012) The foundation of science and technology in view of Muhammad Abduh. Asian Journal of Natural & Applied Sciences, 1 (2). pp. 133-145. ISSN 2186-8476 (O), 2186-8468 (P)
Ahmad, Zuraida and Ismail, Ahmad Faris and Shafie, Amir Akramin and Ihsan, Sany Izan and Halim, Zahurin and Mohamad, Souad A. (2011) Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, 1 (3). pp. 131-137. ISSN 2229-9947
Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris and Rahman, M. M. and Momani, Shaher Mohammad (2011) Exact solution for linear and nonlinear systems of PDEs by homotopy-perturbation method. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 3295-3305. ISSN 1991-8178
Rashmi, W. and Ismail, Ahmad Faris and Sopyan, Iis and Jameel, Ahmed Tariq and Yusof, Faridah and Khalid, M. and Mubarak, N. M. (2011) Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic. Journal of Experimental Nanoscience, 6 (6). pp. 567-579. ISSN 1745-8099
Mustafa, Ammar A. and Al-Khateeb, Khalid A. Saeed and Ismail, Ahmad Faris (2011) The effect of incorporating lithium fluoride on the compressive strength and diametric tensile strength of glass ionomer cement. Advanced Materials Research, 264. pp. 508-512. ISSN 1662-8985
Walvekar , Rashmi Gangasa and Ismail, Ahmad Faris and Mohamed, Khalid and Yusof, Faridah (2011) CFD studies on natural convection heat transfer of Al2O3-water nanofluids. Heat Mass Transfer, 47 (10). pp. 1301-1310. ISSN 1432-1181 (O), 0947-7411 (P)
Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmad Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3). pp. 227-244. ISSN 1741-5152 (O), 1744-232X (P)
Hrairi, Meftah and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris (2010) Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study. Journal of Thermophysics and Heat Transfer, 24 (1). pp. 165-172. ISSN 1533-6808 (O), 0887-8722 (P)
Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 (1). pp. 45-54. ISSN 0022-4898
Abdul Hadi, Muaz and Noorbatcha, Ibrahim Ali and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2010) Simulated mutagenesis to predict the mutational effect on the thermostability of Bacillus circulans xylanase. Research Journal of Chemistry and Environment, Specil (issue). pp. 195-199. ISSN 0972-0626
Al-Mamun, Abdullah and Yehya, M. Ahmed and Mohammed, A. R. S. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Al-Khatib, Ma'an Fahmi Rashid and Ismail, Ahmad Faris and Idris, Azni (2010) Clean production of carbon nanomaterials to remove arsenic from drinking water. OIDA International Journal of Sustainable Development, 1 (7). pp. 45-52. ISSN 1923-6654(P), 1923-6662(O)
Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),
Khalid, M. and Ismail, Ahmad Faris and Ratnam, Chantara Thevy and Yusof, Faridah and Rashmi, W. and Al-Khatib, Ma'an Fahmi Rashid (2010) Effect of radiation dose on the properties of natural rubber nanocomposite. Radiation Physics and Chemistry, 79 (12). pp. 1279-1285. ISSN 1279-1285
Ismail, Ahmad Faris and Khalifa, Othman Omran (2010) Engineering curriculum design and development. Australian Journal of Islamic Studies, 2 (1). pp. 7-26. ISSN 18346170
Haque, Md. Mohafizul and Ismail, Ahmad Faris (2010) Engineering materials and manufacturing processes from Qur'anic perspective. Advanced Materials Research, 83-86. pp. 834-841. ISSN 1662-8985
Omar, Ashraf Ali E. and Ong, Jiunn Chit and Asrar, Waqar and Ismail, Ahmad Faris (2009) Accuracy of Bhatnagaar-Gross-Krook scheme in solving laminar viscous flow problems. AIAA Journal, 47 (4). pp. 885-892. ISSN 0001-1452
Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2009) In silico design in designing xylanase for biobleaching industry. Journal of Applied Sciences, 9 (17). pp. 3184-3187. ISSN 1812-5662 (O), 1812-5654 (P)
Haque, Md. Mohafizul and Khan, Ahsan Ali and Ismail, Ahmad Faris (2009) Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B, 23 (6-7). pp. 826-831. ISSN 0217-9792 E-ISSN 1793-6578
Ahmed, Mirghani Ishak and Hrairi, Meftah and Ismail, Ahmad Faris (2009) On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34. pp. 1471-1478. ISSN 0960-1481
Al-Mamun, Abdullah and Al-Khatib, Ma'an Fahmi Rashid and Abdul Kadir, Zahirah and Ahmed, Yehya M. and Mohammed, A. R. S. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Ismail, Ahmad Faris and Idris, Azni (2009) Optimisation of arsenic adsorption from water by carbon nanofibers grown on powdered activated carbon impregnated with nickel. Journal of Applied Sciences, 9 (17). pp. 3180-3183. ISSN 1812-5662 (O), 1812-5654 (P)
Eltahir, Wasil Elsadig and Salami, Momoh Jimoh Emiyoka and Ismail, Ahmad Faris and Lai, Weng Kin (2008) Design and evaluation of a pressure-based typing biometric authentication system. EURASIP Journal on Information Security, 2008. pp. 1-14. ISSN 1687-4161
M. K., Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of aluminum silicon carbide (AlSiC). Journal of Materials Processing Technology, 192-3. pp. 147-158. ISSN 0924-0136
Chowdhury, Md. Sazzad Hossien and Reaz, Mamun Bin Ibne Ibne and Ibrahimy, Muhammad Ibn and Ismail, Ahmad Faris and Mohd-Yasin, Faisal (2007) Wavelet based noise removal from EMG signals. Informacije MIDEM: Journal of Microelectronics, Electronic Components and Materials, 37 (2). pp. 94-97. ISSN 0352-9045
Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakr, Yousif Abdalla and Amin, A. K. M. Nurul (2007) Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology, 185 (1-3). pp. 91-96. ISSN 0924-0136
Haseeb, Shariq and Ismail, Ahmad Faris (2007) Handoff latency analysis of mobile IPv6 protocol variations. Computer Communications, 30 (4). pp. 849-855. ISSN 0140-3664
Ahmad, Zuraida and Khalid, Asad. A. and Ismail, Ahmad Faris (2007) Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design, 28. pp. 71-77. ISSN 0261-3069
Ibrahimy, Muhammad Ibn and Reaz, Mamun Bin Ibne Ibne and Mohd Ali, M. A. and Khoon, T. H. and Ismail, Ahmad Faris (2006) Hardware realization of an efficient fetal QRS complex detection algorithm. WSEAS Transaction on Circuits and Systems, 5 (4). pp. 575-581. ISSN 1109-2734
Assim, Awss and Reaz, Mamun Bin Ibne Ibne and Ibrahimy, Muhammad Ibn and F., Choong and Ismail, Ahmad Faris and Mohd-Yasin, Faisal (2006) An AI based self-moderated smart-home. Informacije MIDEM: Journal of Microelectronics, Electronic Components and Materials, 36 (2). pp. 91-94. ISSN 0352-9045
Haseeb, Shariq and Ismail, Ahmad Faris (2006) Comparative performance analysis of mobile IPv6 protocols: special reference to simultaneous bindings. Journal of Computer Sciences, 2 (2). pp. 154-159. ISSN 1549-3636
Haque, Md. Mohafizul and Hussein, Nur Izan Syahriah and Ismail, Ahmad Faris (2006) Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys. Key Engineering Materials, 306/8. pp. 893-898. ISSN 1013-9826
Abakrb, Yousif A. and Ismail, Ahmad Faris (2005) Theoretical and experimental investigation of a novel multistage evacuated solar still. Journal of Solar Energy Engineering, 127 (3). pp. 381-385. ISSN 0199 - 6231
Mahmud, Jamaluddin and Ismail, Ahmad Faris and Pervez, Tasneem (2005) Employing a failure criterion with interaction terms to simulate the progressive failure of carbon-epoxy laminates. Journal - The Institution of Engineers, Malaysia, 66 (2). pp. 6-14. ISSN 0126-513X
Haque, Md. Mohafizul and Ismail, Ahmad Faris (2005) Effect of superheating temperatures on microstructure and properties of strontium modified aluminium–silicon eutectic alloy. Journal of Materials Processing Technology, 162/3. pp. 312-316. ISSN 0924-0136
Shah, Qasim Hussain and Homma, H. and Iliyas, M. H. and Ismail, Ahmad Faris (2005) The effect of material property gradient on the fracture toughness of a PMMA/PC bimaterial with a crack normal to the interface. Journal of Applied Sciences, 5 (3). pp. 476-481. ISSN 1812-5654
Mohd Ishak, Mohd Azlan and Ismail, Khudzir and Ismail, Ahmad Faris (2004) The effect of peroxyacetic acid treatment at elevated temperature onto the Indonesian coal microstructure. Science Letters, 1 (1). pp. 1-7. ISSN 1675-7785
Haseeb, Shariq and Sidek, Khairul Azami and Ismail, Ahmad Faris and Weng Kin, Lai and Yit Mei, Aw (2004) AntNet: a robust routing algorithm for data networks. International Islamic University Malaysia Engineering Journal, 5 (1). pp. 1-12. ISSN 1511-788X
Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2002) Experimental and numerical analysis of electronics heat sink. IIUM Engineering Journal, 3 (2). pp. 17-32. ISSN 1511-788X
Jubran, B. and Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakar, Y.A (2000) Numerical modelling of a multi-stage solar still. Energy Conversion and Management, 41 (11). pp. 1107-1121. ISSN 0196-8904
Jubran, B.A. and Ismail, Ahmad Faris and Pervez, T. and UNSPECIFIED (2000) Prediction of the performance of a solar water detoxification system under Malaysian climatic conditions. Energy Conversion and Management, 41 (1). pp. 1-12. ISSN 0196-8904
Ismail, Ahmad Faris and Yusaf, Talal F. and Mahdi, Faisal M.A. and Shamsuddin, Abdul Halim (1997) Combustion processes of rice husks for energy. RERIC International Energy Journal, 19 (2). pp. 63-75. ISSN 1513-718X
Yusaf, Talal F. and Shamsuddin, Abdul Halim and Ali, Yusoff and Ismail, Ahmad Faris (1996) Design modification of high speed diesel engine to accomodate compressed natural gas. RERIC International Energy Journal, 18 (1). pp. 19-26. ISSN 1513-718X
Ismail, Ahmad Faris (1996) 2-D and 3-D cellular models using erosion and dilation: model development. Malaysian Journal of Computer Science, 9 (1). pp. 18-24. ISSN 0127-9084
Book
Shuriye, Abdi Omar and Ismail, Ahmad Faris (2011) Qur'anic values & engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn. Bhd., Petaling Jaya, Selangor. ISBN 9789673490721 / 9673490724
Shuriye, Abdi Omar and Ismail, Ahmad Faris (2011) Qur’anic values and engineering studies: approaches and methods in the process of Islamizing engineering curriculum. Pearson Malaysia Sdn.Bhd, Malaysia. ISBN 9789673490721 ; 967-3490-724
Omar Shuriye, Abdi and Ismail, Ahmad Faris and Dahalan@Ghazali, Azweeda, eds. (2009) Ethics of engineering education. IIUM Press, Kuala Lumpur. ISBN 9789833855674
Faris, Waleed Fekry and Mohyuddin, Muhammad Raheel and Ismail, Ahmad Faris (2009) Fundamentals of fluid mechanics. IIUM Press, Kuala Lumpur. ISBN 9789833855889
Book Chapter
Ismail, Ahmad Faris and Anuar, Siti Zubaidah (2023) International, cultural and experiential learning. In: International Islamic University Malaysia at 40: Leading the Way. IIUM Press, Kuala Lumpur, pp. 171-183. ISBN 9789674913267
Ahmad, Zuraida and Zain, Saidi and Halim, Zahurin and Ismail, Ahmad Faris (2018) Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 152-166. ISBN 978-967-491-010-5
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299
Hawlader, Mohammad Nurul Alam and Baradey, Y. and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology. Advances in Drying Science & Technology . CRC Press, Boca Raton, Florida, pp. 189-215. ISBN 978-1-4987-3499-8
Abdulwaheed, Musa and Ismail, Ahmad Faris (2011) Al-Razi's contribution to the study of nexus between human mind and body. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 39-44. ISBN 978-967-418-155-0
Ismail, Ahmad Faris and Walvekar , Rashmi Gangasa (2011) Application of nanofluids as coolants in radiator. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 1-13. ISBN 9789670225876
Ismail, Ahmad Faris and Mahmood, Iskandar Al-Thani and Pervez, Tasneem (2011) Automation of pump test rig system. In: Mechatronics book series: Selected papers from ICOM '01, ICOM '05, and ICOM '08. IIUM Press, Kuala Lumpur, pp. 3-16. ISBN 9789670225685
Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2011) CFD analysis of an evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 156-162. ISBN 9789674181581
Yusof, Faridah and Khalid, M. and Ismail, Ahmad Faris (2011) Carbon nanotube/rubber nanocomposites. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 14-45. ISBN 9789670225876
Ameer Amsa, Mohamad Ghazali and Ismail, Ahmad Faris (2011) Contribution of Lofti Asker Zadeh to fuzzy logic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 121-126. ISBN 978-967-418-157-4
Ameer Amsa, Mohamad Ghazali and Ismail, Ahmad Faris (2011) Contribution of Tipu Sultan to rocket technology. In: Contributions of Early Muslim scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 143-146. ISBN 978-967-418-157-4
Yunus, Nurul Azhani and Ismail, Ahmad Faris (2011) Contributions of Ibn Al-Haytham on optics. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 978-967-418-157-4
Ahmed, Mirghani I. and Abakar, Y.A and Pervez, T. and Ismail, Ahmad Faris (2011) Design and analysis of a solar still using finite element method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 79-89. ISBN 9789670225685
Adam, Daud and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2011) Design and development of a lab scale bioreactor for heat inducible enzyme expression system. In: Current research and development in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 211-218. ISBN 9789674181444
Ahmed, Mirghani Ishak and Abakrb, Yousif A. and Ismail, Ahmad Faris (2011) Developments on solar operated water desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 163-168. ISBN 9789674181582
Abdulwaheed, Musa and Ismail, Ahmad Faris (2011) Energy particle-physics : the efforts of Abdel Nasser Tawfic. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 80-85.
Abakrb, Yousif A. and Ismail, Ahmad Faris and Ahmed, Mirghani Ishak (2011) Experimental investigation of a multistage evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 197-202. ISBN 9789674181581
Khalid, Asad A. and Ismail, Ahmad Faris and A.K.M., Nurul Amin (2011) Finite element study of composite cones under axial compression loading. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 69-78. ISBN 9789670225685
Abdul Razak, Fadhilah and Ismail, Ahmad Faris (2011) Ibn al-Jazzar on fever. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 59-63. ISBN 978-967-418-155-0
Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Ismail, Ahmad Faris and Mohd. Salleh, Hamzah (2011) Improving enzyme catalysis through the improvement of binding strength: simulated mutation to predict the mutational effect on Xylanase Cex. In: Current research and development in biotechnology engineering at IIUM (volume II). IIUM Press, Kuala Lumpur, pp. 207-214. ISBN 9789674181512
Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakrb, Yousif A. (2011) Modelling of electronics heat sink – influence of the wake function generation on the accuracy of CFD analysis. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 203-212. ISBN 9789674181581
Asih, Devi Ratna and Ismail, Ahmad Faris (2011) Oculist's contributions to cataract operation. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 126-130. ISBN 978-967-418-155-0
M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) PCD inserts in end milling of Aluminum Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 253-257. ISBN 9789674181758
M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8
Ahmed Ghazal, Belal and Ismail, Ahmad Faris (2011) The contribution of Hassan al-Rammah to gunpowder and rocket technology. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 36-40. ISBN 978-967-418-157-4
Larbani, Moussa and Ismail, Ahmad Faris (2011) The invention of the helium-neon gas laser by Ali Javan. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 160-164. ISBN 978-967-418-157-4
Shafie, Amir Akramin (2009) Designing a rubric to assess student engineering projects. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 301-308. ISBN 9789833855674
Jamaludin, Roslan and Shihab, A. Hameed and Noordin, Mohamad Fauzan (2009) Ethical requirement in quality software engineering projects. In: Ethics of Engineering Education. IIUM Press, Kuala Lumpur, pp. 43-51. ISBN 9789833855674
Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2009) Improvement of machinability of hard to machine materials by cryogenic cooling and job preheating. In: Proceedings of the seminar on research findings 2008. IIUM Press, Kuala Lumpur, pp. 443-454. ISBN 9789833855780
Tijani, Ismaila B. and Martono, Wahyudi (2009) Social and ethical implications of intelligent machines. In: Ethics of Engineering Education. IIUM Press, Kuala Lumpur, pp. 135-139. ISBN 9789833855674
Ismail, Ahmad Faris and Shuriye, Abdi Omar and Adam, Ibrahim A. H. (2009) The concept of Itqan and its role in Muslim professional life. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 99-105. ISBN 9789833855674
Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)
Proceeding Paper
Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Ismail, Ahmad Faris (2021) Numerical Modelling of Bird Strike on a Rotating Engine Blade Based on Variations of Porosity Density. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), International Islamic University Malaysia, Kuala Lumpur. (Unpublished)
Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2020) A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11th - 14th December 2019, Bangkok, Thailand.
Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.
Suliman, M.M. Ali and Omar, Ashraf A. and Faris, Waleed Fekry and Ismail, Ahmad Faris and Mohamed Ali, Jaffar Syed (2019) Aerodynamics of a circular planform wing. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.
Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.
Arifutzzaman, A. and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Stability investigation of water based exfoliated graphene nanofluids. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.
Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) Analytical approximations for the oscillators with anti-symmetric quadratic nonlinearity. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.
Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.
Ahmed, Yaakob and Ismail, Ahmad Faris and Ra'ees, Wahabuddin (2017) OIC movement for stronger political community. In: Towards the Renascence of Muslim Future Thinkers: Vision TN50 of Malaysia Forum 2017, 20th November 2017, Kuala Lumpur. (Unpublished)
Haseeb, Shariq and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Ismail, Ahmad Faris (2017) Network Function Virtualization (NFV) based architecture to address connectivity, interoperability and manageability challenges in Internet of Things (IoT). In: 6th International Conference on Mechatronics - ICOM'17, 8th–9th August 2017, Kuala Lumpur.
Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Ismail, Ahmad Faris (2017) Prediction of steam turbine performance as a waste heat recovery mechanism on naturally aspirated spark ignition engine using artificial neural network. In: 2016 3rd International Conference on Soft Computing & Machine Intelligence (ISCMI 2016 ), 23rd-25 November 2016, Dubai, UAE.
Haseeb, Shariq and Hassan Abdalla Hashim, Aisha and Khalifa, Othman Omran and Ismail, Ahmad Faris (2017) Connectivity, interoperability and manageability challenges in internet of things. In: The International Conference on Electrical and Electronic Engineering 2017 (IC3E 2017), 14-5 Aug 2017, Batu Pahat, Johor.
Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15-17 Nov 2017, Putrajaya, Malaysia.
Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
Chowdhury, Md. Sazzad Hossien and Hosen, Md Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences, 15-17 Nov 2016, Putrajaya, Malaysia.
Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris (2017) Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 July 2016, Kuala Lumpur; Malaysia.
Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.
Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) Biogas upgrading by chemical absorption using a packed column apparatus. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Machouche, Salah and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha @ Tohara, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016, 7th-8th May 2016, Kuala Lumpur.
Zaidon, Nuradawiyah and Nordin, Anis Nurashikin and Ismail, Ahmad Faris and Mak, Wing Cheung (2016) Serpentine microfluidic structures for concentration rradient generators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP), 30th May-2nd June 2016, Budapest, Hungary.
Abdeen, Fouad R. H. and Mel, Maizirwan and Jami, Mohammed Saedi and Ihsan, Sany Izan and Ismail, Ahmad Faris (2016) A simulation study for the upgrading of biogas using aqueous ammonia. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.
Lwas, Ali K. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Ismail, Ahmad Faris and Singh, Mandeep and Chebil, Jalel and Zyoud, Al-Hareth and Dao, Hassan (2015) Analysis of synthetic storm technique based on Ku-Band Satellite Beacon measurements in Malaysia. In: International Conference on Communication and Computer Engineering (ICOCOE 2014), 20 - 21 May, 2014, Melaka.
Zaidon, Nuradawiyah and Nordin, Anis Nurashikin and Ismail, Ahmad Faris (2015) Modelling of microfluidics network using electric circuits. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2015), 19th-21st Dec. 2015, Kuala Terengganu, Terengganu.
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)
Lwas, Ali K. and Islam, Md. Rafiqul and Habaebi, Mohamed Hadi and Ismail, Ahmad Faris and Abdullah, Khaizuran and Alhareth , Zyoud and Chebil, Jalel and Singh, Mandeep (2014) Analysis of the synthetic storm technique using rain height models to predict rain attenuation in tropical regions. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014), 23th - 25th September 2014, Kuala Lumpur.
Mel, Maizirwan and Nadiah, Mohd Suhuli and -, Avicenna and Ihsan, Sany Izan and Ismail, Ahmad Faris and Yaacob, Sarifah (2014) Effect of organic loading rate (OLR) of slurry on biogas production quality. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)
Mel, Maizirwan and Avicenna, Avicenna and Mohd Rodzi, Muhammad Zulkhairy and Ihsan, Sany Izan and Ismail, Ahmad Faris and Yaacob , Sharifah (2013) Biogas production by codigestion of fruit and vegetable wastes: organic loading rate (OLR) effect study. In: Persidangan Kebangsaan Pertama Program Pemindahan Ilmu (KTP 01), 21st - 23rd August 2013, Bangi, Selangor.
Jameel, Ahmad Tariq and Hoda, Asif and Ismail, Ahmad Faris (2012) Numerical simulation of thin-liquid film flow on inclined palne using implicit and explicit finite difference schemes. In: International Conference on Applied and Computational Mathematics (ICACM) 10th Anniversary of the Foundation of the Institute of Applied Mathematics (IAM), 3-6 October 2012, Middle East Technical University, Ankara, Turkey. (Unpublished)
Al-Khateeb, Khalid A. Saeed and Mustafa, Ammar A. and Ismail, Ahmad Faris and Sutjipto, Agus Geter Edy (2011) Investigation of a new porous glass ceramic for potential bone implant. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.
Mustafa, Ammar A. and Al-Khateeb, Khalid A. Saeed and Ismail, Ahmad Faris (2011) Remineralization effect of new type of glass ionomer based root canal sealer. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.
Abdul Majid, Zafri Azran and Hazali, Norazlanshah and Hanafiah, M. A. K. M. and Abdullah, A. A. and Ismail, Ahmad Faris and Ruslan, M. H. and Sopian, K. and Mohd Azmi, M. S. (2011) Design and performance of 20 watts portable solar generator. In: 1st InternationalConferenceonMechanicalEngineeringResearch2011(ICMER2011), Kuantan, Pahang.
Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris (2010) Analytical treatment of system of linear and nonlinear PDEs by Homotopy-Perturbation method. In: World Congress on Engineering (WCE) 2010, June 30 - July 2, 2010,, London, U.K..
Khalid, Mohammad and Ismail, Ahmad Faris and Yusof, Faridah and Ratnam, Chantara Thevy and Walvekar, Rashmi Gangasa and Al-Khatib, Ma'an Fahmi Rashid (2010) Electron beam crosslinked natural rubber/multiwalled carbon nanotube nanocomposite. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Jameel, Ahmed Tariq and Asrar, Waqar and Ismail, Ahmad Faris and Yusof, Faridah (2010) Long wave instabilities of heated falling films: role of Van Der Waals attraction. In: XIVth International Conference Surface Forces, 21-27 June 2010, Moscow, St. Petersburg.
Mustafa, Ammar A. and Al-Khateeb, Khalid A. Saeed and Ismail, Ahmad Faris (2010) New glass Ionomer cement with boron. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Ismail, Ahmad Faris and Jameel, Ahmed Tariq and Yusof, Faridah (2010) Studies on heat transfer enhacement of CNT-GA nanofluid in a laminar flow heat exhanger. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Chowdhury, Md. Sazzad Hossien and Hassan, Talib Hashim and Ismail, Ahmad Faris (2010) A modified algorithm for the homotopy perturbation method with applications to Lotka-Volterra systems. In: 6th IMT-GT Conference on Mathematics, Statistics and its Applications (ICMSA2010), 3-4 November, 2010, Kuala Lumpur, Malaysia.
Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris (2009) Solving linear system of partial differential equations by homotopy-pertubation method. In: 4th International Conference on Research and Education in Mathematics, 21-23 October 2009, Renaissance Hotel, Kuala Lumpur.
Noorbatcha, Ibrahim Ali and Abdul Hadi, Muaz and Ismail, Ahmad Faris and Hamzah, Mohd. Salleh (2009) In silico approach in designing Xylanase for biobleaching industry. In: 3rd International Conference on Chemical & Bioprocess Engineering , 12–14 August 2009, Kota Kinabalu, Sabah.
Cetiner, Beytullah Gultekin and Ismail, Ahmad Faris and Hassan, Azmi (2009) Ontology of manufacturing enginneering. In: 5th International Advanced Technologies Symposium (IATS'09), 13 - 15 May, 2009, Karabuk, Turkey.
Al-Mamun, Abdullah and Al-Khatib, Ma'an Fahmi Rashid and Jamaluddin Ahmad, Aishah and Al-Sa'adi, Mohammed A. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Ismail, Ahmad Faris and Idris, Azni (2009) Adsorption of chromium from water by carbon nanotubes grown on powdered activated carbon. In: International Conference on Sustainable Infrastructure and Built Environment in Developing Countries - SIBE,, 2-3 Nov., 2009, Bandung, Indonesia.
Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris (2009) Comparing numerical methods for the solution of Cauchy reaction-diffusion problems. In: 4th International Conference on Mathematics and Statistics 2009, 13-15 August 2009, Bandar Lampung, Indonesia.
Haque, Md. Mohafizul and Amir, Adibah and Ismail, Ahmad Faris (2009) Investigation on tribological properties on strontium modified piston alloy under lubricated condition. In: International Conference on Advances on Materials and Processing Technologies (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
Al-Mamun, Abdullah and Al-Khatib, Ma'an Fahmi Rashid and Kadir, Zahirah Abdul and Ahmed, Yehya M. and Mohammed, A. R. S. and Alam, Md. Zahangir and Muyibi, Suleyman Aremu and Ismail, Ahmad Faris and Idris, Azni (2009) Optimisation of arsenic adsorption from water by carbon nanofibres grown on powdered activated carbon impregnated with nickel. In: 3rd International Conference on Chemical and Bioprocess Engineering, 12 – 14 August 2009, Sabah.
Haque, Md. Mohafizul and Ismail, Ahmad Faris and Alias, Tuti Yasmin (2009) Selection of materials and manufacturing processes for green engineering. In: International Conference on Advances on Materials and Processing Technologies( AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar and Ismail, Ahmad Faris (2008) A gas-kinetic BGK solver for two-dimensional turbulent compressible flow. In: International Conference on Scientific Computing , July 14-17, 2008, Las Vegas, Nevada, USA.
Shuriye, Abdi Omar and Ismail, Ahmad Faris (2008) The contribution of the faculty of engineering in Islamizing engineering studies. In: International Conference on Engineering Professional Ethics and Education (ICEPEE'08) , 13 May 2008, Kuala Lumpur, Malaysia.
Elabdin, Zain and Islam, Md. Rafiqul and Khalifa, Othman Omran and Ismail, Ahmad Faris (2008) Duststorm measurements for the prediction of attenuation on microwave signals in Sudan. In: International Conference on Computer and Communication Engineering (ICCCE08) , 13-15 May, 2008, Kuala Lumpur, Malaysia.
Haque, Md. Mohafizul and Ismail, Ahmad Faris (2008) Effect of cooling rate on strength and fracture surfaces of alpha brass casting. In: 7th International Conference on Fracture and Strength of Solids, FEOFS 2007; Urumqi; China;, 27 -29 August 2007, Urumqi, China.
Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.
Rashmi, W. and Ismail, Ahmad Faris and Asrar, Waqar and Khalid, M. and Yusof, Faridah (2008) Natural convection heat transfer in nanofluids - a numerical study. In: Proceedings of the 7th Symposium on Transport Phenomenon in Manufacturing Processes 2008, August 10–14, 2008, Jacksonville, Florida, USA.
Ayob, M. Z. and Ismail, Ahmad Faris (2006) Design of prototype expert system for transliterating Arabic-to-Roman words. In: 4th Student Conference on Research and Development 2006 (ScoreD2006), 27-28 June 2006, Shah Alam, Selangor.
Ibrahimy, Muhammad Ibn and Reaz, Mamun Bin Ibne and Mohd Ali, Mohd Alauddin and T., H. Khoon and Ismail, Ahmad Faris (2006) Development of an efficient algorithm for fetal heart rate detection: a hardware approach. In: 5th WSEAS International Conference on Instrumentation, Measurement, Circuits and Systems, 2006, 16-18 April, 2006, Hangzhou, China.
Elshaikh, Zain Elabdin Omer and Islam, Md. Rafiqul and Ismail, Ahmad Faris and Khalifa, Othman Omran (2006) High altitude platform for wireless communications and other services. In: 4th International Conference on Electrical and Computer Engineering, 19-21 December 2006, Dhaka, Bangladesh.
Ibrahimy, Muhammad Ibn and Reaz, Mamun Bin Ibne and Mohd-Yasin, Faisal and Khoon, T. H. and Ismail, Ahmad Faris (2005) Fetal QRS complex Detection Algorithm for FPGA Implementation. In: International Conference on Computational Intelligence for Modelling, Control and Automation, CIMCA 2005, 28 - 30 Nov 2005, Vienna, Austria.
Asaduzzaman, Khandaker and Reaz, Mamun Bin Ibne and Ibrahimy, Muhammad Ibn and F. , Choong and Mohd-Yasin, Faisal and Ismail, Ahmad Faris (2005) RSA with flexible key size: a hardware approach. In: International Conference on Robotics, Vision, Information and Signal Processing (ROVISP2005), 20-22 July 2005, Penang.
Eltahir, Wasil Elsadig and Salami, Momoh Jimoh Eyiomika and Ismail, Ahmad Faris and Lai, Weng Kin (2004) Dynamic keystroke analysis using AR model. In: IEEE International Conference on Industrial Technology, 8 - 10th December 2004, Hammamet; Tunisia.
Khan, Md. Raisuddin and Ismail, Ahmad Faris and Ibrahim, M. S. (2004) Influence of higher order coupling terms in vibration analysis of anti-symmetric cross-ply composite plates. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), 11-13 May 2004, Kuala Lumpur, Malaysia.
Ibrahim, Mohd Sultan and Ismail, Ahmad Faris and Khan, Md. Raisuddin (2002) Free vibration analysis of laminated composite plates based on higher order shear deformation theory by using finite element method. In: Annual Workshop National Science Fellowship.
Mohd Hassan Wong , Fadhli Wong and Mohd Supian, Ainil Sufreena and Ismail, Ahmad Faris and Lai, Weng Kin and Ong, Cheng Soon (2001) Enhanced user authentication through typing biometrics with artificial neural networks and k-nearest neighbor algorithm. In: Signals, Systems and Computers, 2001. Conference Record of the Thirty-Fifth Asilomar Conference on, 04 -07 Nov 2001, Pacific Grove, CA, USA .
Monograph
Rahman, Mohammed Ataur and Sany, Ihsan and Rashid, Muhammad Mahbubur and Ismail, Ahmad Faris (2019) Prototype of electromagnetic actuator for continuously variable transmission for passenger car. Research Report. UNSPECIFIED. (Unpublished)
Mat Ghani, Gairuzazmi and Mohd Ali, Hairuddin and Nordin, Mohamad Sahari and Ismail, Ahmad Faris (2013) Arah aliran dan unjuran kemasukan pelajar di institusi pengajian tinggi (IPT) dari negara-negara OIC. Research Report. MOHE. (Unpublished)
Mustafa, Ammar A. and Al-Khateeb, Khalid A. Saeed and Ismail, Ahmad Faris (2011) A new dental material for remineralisation of caries lesion used as a root canal sealer. UNSPECIFIED. Quintessenz Verlags GmbH.
Patent
Amin, A. K. M. Nurul and Lajis, M. A. and Ismail, Ahmad Faris (2014) A Method and an Apparatus for Machining a Tool Steel. MY-152227-A.
Khalid, M. and Ismail, Ahmad Faris and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Thevy Ratnam, Chantra and Walvaker, Rashm G (2010) Method of producing cross-linked nanocomposite. PI 2010000488.
Walvekar, Rashmi Gangasa and Ismail, Ahmad Faris and Jameel, Ahmed Tariq and Asrar, Waqar and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Khalid, M. (2010) A method of producing nanofluids comprising carbon nanotubes. PI 2010000366.