IIUM Repository

Dr Mohd Hanafi Ani

Manufacturing and Materials

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Abdul Latiff, Abdul Somad and Musa, Mukhtaruddin and Anhar, Zaki and Illias, Suhaimi and Ani, Mohd Hanafi (2020) Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..
  2. Ani, Mohd Hanafi and Azman, M. A. F. and Musa, Mukhtaruddin and Anhar, Zaki and Abdul Hamid, Abd. Malek (2020) High temperature cathodic protection of Fe-Cr alloy. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..
  3. Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..
  4. Musa, Mukhtaruddin and Purwanto, Hadi and Razak, Rajabi and Othman, Raihan and Musa, Lukman and Ani, Mohd Hanafi (2020) Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..
  5. Zainal, Muhammad Talhah and Mohd Yasin, Mohd Fairus and Wan Ali, Wan Fahmin Faiz and Tamrin, Khairul Fikri and Ani, Mohd Hanafi (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi‐empirical approach. Carbon Letters, Early Access. pp. 1-11. ISSN 1976-4251 E-ISSN 2233-4998 (In Press)
  6. Rosman, Nur Afiqah and Illias, Suhaimi and Hussain, Suhaila and Ashrul Ishak, Mohamad Shaiful and Ani, Mohd Hanafi (2020) Experimental investigation of critical heat flux during impact of a droplet onto hot horizontal surface. International Journal of Emerging Trends in Engineering Research, 8 (5). pp. 1663-1666. ISSN 2347-3983
  7. Fauzi, Fatin Bazilah and Ismail, Edhuan and Syed Abu Bakar, Syed Noh and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Md Din, Muhammad Faiz and Illias, Suhaimi and Ani, Mohd Hanafi (2019) The role of gas-phase dynamics in interfacial phenomena during few-layer graphene growth through atmospheric pressure chemical vapour deposition. Physical Chemistry Chemical Physics, 22 (6). pp. 3481-3489. ISSN 1463-9076 E-ISSN 1463-9084
  8. Anhar, Zaki and Musa, Muktaruddin and Illias, Suhaimi and Ani, Mohd Hanafi (2020) A review of current prediction methods for slagging and fouling in Malaysian coal fired power plants. Test Engineering & Management, 83 (May-June). pp. 1411-1418. ISSN 0193-4120
  9. Sutjipto, Agus Geter Edy and Hisyam, Anwaruddin and Salim, Nurjannah and Ab Rahim, Mohd Hasbi and Legowo, Ari and Ani, Mohd Hanafi (2019) Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26 Mar - 10 Apr 2019, Dubai, United Arab Emirates.
  10. Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.
  11. Illias, S and Rosman, N A and Abdullah, N S and Shaiful, A I M and Omar, M N B and Ismail, K A and Ani, Mohd Hanafi (2019) Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface. In: UNSPECIFIED.
  12. Illias, Suhaimi and Hussain, Suhaila and Rosman, N A and Abdullah, Nadiah Syafiqah and Shaiful, Mohamad Shaiful Ashrul and Omar, Mohd Nazri and Ismail, K A and Ani, Mohd Hanafi (2019) Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, 26 - 27 Aug 2019, Penang Island.
  13. Sirat, Mohd Shukri and Ismail, Edhuan and Ramlan, Amir Hakimi and Fauzi, Fatin Bazilah and Yaacob, Iskandar Idris and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2019) Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
  14. Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
  15. Ramlan, Amir Hakimi and Sirat, Mohd Shukri and Ismail, Edhuan and Buys, Yose Fachmi and Purwanto, Hadi and Mohd Mustafah, Yasir and Md Din, Muhammad Faiz and Ani, Mohd Hanafi (2019) Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
  16. Che Mohd Noh, Mohd Ihsan and Mohamed, Mohd Ambri and Ismail, Ahmad Ghadafi and Ani, Mohd Hanafi and Majlis, Burhanuddin Yeop (2019) Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.
  17. Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina and Zulkifli, Mohd Fadzil and Mohamed, Mohd Ambri and Ani, Mohd Hanafi (2018) Carbon nanomaterials derived from Malaysia’s highway road asphalt waste as electrode for supercapacitor. Journal of Materials and Environmental Sciences, 9 (7). pp. 2164-2168. ISSN 2028-2508
  18. Haider I., Farag and -, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2018) A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.
  19. Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326
  20. Raja Seman, Raja Noor Amalina and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2018) Graphene/transition metal dichalcogenides hybrid supercapacitor electrode: status, challenges, and perspectives. Nanotechnology, 29 (50). ISSN 0957-4484 E-ISSN 1361-6528

Most Viewed Items

Item titleViews
1Synthesis and characterization of ZnO thin film memristor1693
2Natural corrosion inhibitor for corrosion protection of metal artefact: an overview1567
3Pencemaran merentas sempadan 1507
4Comparative electrochemical performance characteristics of aluminium-air cell employing seawater and NaCl electrolytes1450
5Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K1441
6Formation of protective Cr2O3 scale at high temperature and the effect of mass transport in the presence of water vapor1372
7Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments1344
8Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments1322
9Effect of Al ions on adsorption efficiency of mesoporous organosilica for water treatment1291
10Thermal stability of nickel molybdenum electrodeposits1276
11The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K1237
12Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K1191
13Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells1187
14Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K1158
15Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K1142
16Recent trend in application of high temperature ferritic Fe-Cr alloys in power plant1133
17Structural properties of deposited ZnO thin films on flexible substrates at various substrate temperatures and RF power1126
18Loji nuklear pembekal utama tenaga dunia masa depan1109
19Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent1106
20Evolving Malaysia1102
21Studies on initial stage of high temperature oxidation of Fe - 9 to 12% Cr alloys in water vapour environment1083
22Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K1049
23Initial stage oxidation of cr in dry and wet environment at 1073 K and the significant differences of FT – IR spectra produced thereof1041
24Principle of solid electrolyte oxygen sensor1033
25Evaluating traditional measures for the care of Keris From scientific point of view1030
26Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method972
27Formation of hydrophobic surface using two stages electrodeposition method952
28X-ray photoelectron studies on the surface chemical states of yttria-stabilized zirconia thin film in aqueous acid hydrofluoric950
29Transition metal oxide (TMO) thin film memristor on cu substrate using dilute electrodeposition method930
30In-situ method to monitor surface reaction/oxidation at high temperature900