Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering. pp. 1-10. ISSN 2193-567X E-ISSN 2191-4281

Preview	PDF (SCOPUS) - Supplemental Material Download (457kB) | Preview
	PDF (Article) - Published Version Restricted to Repository staff only Download (3MB) | Request a copy

Abstract

The high gas-sensing performance of semiconductors is mainly due to the high surface-to-volume ratio because it permits a large exposed surface area for gas detection. This paper presents an evaluation study for the efects of nano-CuO coating parameters on the CO gas-sensing performance. The efects on gas-sensing performance and heat transfer efciency of CuO coating were evaluated by investigating the efects of coating parameters (concentration, temperature, and solution speed) on thickness, grain size, and porosity. The CuO nanoparticle coatings were synthesized using the oxidation method at various operating conditions. Coating characteristics were investigated using X-ray difraction, energy dispersive X-ray Spectroscopy, feld emission scanning electron microscopy, and electrical resistivity meter. The average coating thickness, grain size, and porosity were around 13 μm, 48 nm, and 30%, respectively. The thermal transfer and gas-sensing properties of CuO coating were evaluated according to the total surface area of the coating formed at various operating conditions. The gas-sensing and thermal transfer performance were obtained from the optimization of coating parameters based on the coating morphology to achieve the highest contact surface area. The coating’s surface area was increased by 350 times, which improved the heat transfer efciency of 96.5%. The result shows that the coating thickness increased with the increase in solution concentration and decrease the temperature. The results also show that the sensitivity of the coating for CO gas was increased by 50% due to the reduction of coatings grain size.

Item Type:	Article (Journal)
Additional Information:	6103/90101
Uncontrolled Keywords:	Nano-CuO coating · Coating parameters · CO gas sensitivity · Heat transfer
Subjects:	T Technology > T Technology (General) > T11.95 Industrial directories T Technology > TA Engineering (General). Civil engineering (General) > TA170 Environmental engineering. Sustainable engineering T Technology > TP Chemical technology > TP155 Chemical engineering T Technology > TP Chemical technology > TP200 Manufacture and use of chemicals
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Prof Dr. Md Abdul Maleque
Date Deposited:	08 Jun 2021 16:06
Last Modified:	08 Jun 2021 16:06
URI:	http://irep.iium.edu.my/id/eprint/90101

Available Versions of this Item

• Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. (deposited 08 Jun 2021 16:06) [Currently Displayed]
  • Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. (deposited 15 Jun 2021 16:42)
    • Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. (deposited 14 Jun 2021 09:16)

Actions (login required)

View Item