Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies

Adesta, Erry Yulian Triblas and Riza, Muhammad and Avicenna, Avicenna (2017) Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 327-333. ISSN 2302-9285

	PDF (open access) - Published Version Restricted to Repository staff only Download (385kB) | Request a copy
	PDF (scopus) - Supplemental Material Restricted to Repository staff only Download (234kB) | Request a copy

Abstract

Tool wear prediction plays a significant role in machining industry for proper planning and control machining parameters and optimization of cutting conditions. This paper aims to investigate the effect of tool path strategies that are contour-in and zigzag tool path strategies applied on tool wear during pocket milling process. The experiments were carried out on CNC vertical machining centre by involving PVD coated carbide inserts. Cutting speed, feed rate and depth of cut were set to vary. In an experiment with three factors at three levels, Response Surface Method (RSM) design of experiment with a standard called Central Composite Design (CCD) was employed. Results obtained indicate that tool wear increases significantly at higher range of feed per tooth compared to cutting speed and depth of cut. This result of this experimental work is then proven statistically by developing empirical model. The prediction model for the response variable of tool wear for contour-in strategy developed in this research shows a good agreement with experimental work.

Item Type:	Article (Journal)
Additional Information:	5515/60853
Uncontrolled Keywords:	high speed machining, tool wear, tool path strategy
Subjects:	T Technology > TA Engineering (General). Civil engineering (General) > TA213 Engineering machinery, tools, and implements
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Prof. Dr. Erry Yulian Triblas Adesta
Date Deposited:	31 Dec 2017 02:03
Last Modified:	17 Apr 2018 11:53
URI:	http://irep.iium.edu.my/id/eprint/60853

Actions (login required)

View Item