IIUM Repository

Prof. Dr. Erry Yulian Triblas Adesta

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Wilza, R. and ., Iskandar and Seprianto, Dicky and Adesta, Erry Yulian Triblas (2019) Optimization of parameters in three dimensional printing objects with fused deposition modeling technology against geometry accuracy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 175-179. ISSN 2277-3878
  2. Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878
  3. Adesta, Erry Yulian Triblas and Hilmy, Irfan and ,, Avicenna and Agusman, D. (2019) Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), 30th–31st October 2018, Palembang, Indonesia.
  4. Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075
  5. Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.
  6. Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology, 7 (37). pp. 156-159. ISSN 2227-524X
  7. Adesta, Erry Yulian Triblas and Hamidon, R. and Riza, Muhammad and Alrashidi, R. F.F.A. (2018) Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
  8. Adesta, Erry Yulian Triblas and Prabowo, Herry Agung and Agusman, Delvis (2018) Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
  9. Adesta, Erry Yulian Triblas and Riza, Muhammad and Avicenna, Avicenna (2017) Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 327-333. ISSN 2302-9285
  10. Adesta, Erry Yulian Triblas and Agusman, Delvis and Avicenna, Avicenna (2017) Internet of Things (IoT) in agriculture industries. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 5 (4). pp. 376-382. ISSN 2089-3272
  11. Adesta, Erry Yulian Triblas and Alazemi, Yahya (2017) Integrated engineering project management Approach for typical small to medium manufacturing companies. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 541-545. ISSN 2502-4752 E-ISSN 2502-4760
  12. Hamidon, R. and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohammad Yuhan (2016) Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 453-459. ISSN 1819-6608
  13. Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.
  14. Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas and Al-Fadhli, Fawaz M.K.H. (2015) Organising Value Analysis Value Engineering (VAVE) during New Product Development (NPD). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10052-10057. ISSN 1819-6608
  15. Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas (2015) Implementation of functional analysis using value analysis value engineering (VAVE). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10072-10076. ISSN 1819-6608
  16. Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan and Hamidon, R. (2016) The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 337-344. ISSN 1819-6608
  17. Prabowo, Herry Agung and Adesta, Erry Yulian Triblas (2019) A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 39-43. ISSN 2277-3878
  18. Haruman, Esa and Yong, Sun and Triwiyanto, A. and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2012) An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. Journal of Materials Engineering and Performance, 21 (3). pp. 388-394. ISSN 1059-9495 (P)
  19. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)
  20. Haruman, Esa and Yong, Sun and Triwiyanto, Askar and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2011) A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace. High Temp. Mater. Proc, 1-2. pp. 23-29. ISSN 0334-6455 (print); 2191-0324 (online)

Most Viewed Items

Item titleViews
1Tool life estimation model based on simulated flank wear during high speed hard turning1811
2Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles 1638
3Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis1458
4Tool life in high speed turning with negative rake angle1440
5A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace1426
6Development of surface roughness prediction model for high speed end milling of hardened tool steel1424
7Energy cost modeling for high speed hard turning1410
8A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H131385
9An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace1381
10New approach in cost structuring of high speed hard turning1373
11Machining Time Simulation in High Speed Hard Turning1217
12Implementation of functional analysis using value analysis value engineering (VAVE)819
13Organising Value Analysis Value Engineering (VAVE) during New Product Development (NPD)760
14The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13720
15Sustainable manufacturing framework from Islamic perspective583
16Influence of cutting parameters on cutting force and cutting temperature during pocketing operations569
17Internet of Things (IoT) in agriculture industries487
18Integrated engineering project management Approach for typical small to medium manufacturing companies447
19Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies435
20Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance361
21Investigation of tool engagement and cutting performance in machining a pocket318
22Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries274
23The evaluation of lean manufacturing implementation and their impact to manufacturing performance273
24Hardware improvement of FDM 3D printer: issue of bed leveling failures240
25Toward real time IoT based paste monitoring system for small to medium enterprise (SME)224
26A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance209
27Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part61
28Optimization of parameters in three dimensional printing objects with fused deposition modeling technology against geometry accuracy56