Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA213 Engineering machinery, tools, and implements"

A

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

A. Raof, Natasha and A. Ghani, Jaharah and Syarif, Junaidi and Che Haron, Che Hassan and Abdul Hadi, Musfirah (2014) Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering, 18th-22nd March 2014, Kuala Lumpur.

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Gunasegaran, Umma Sankar and Lim, Joo Eng and Mohamad Amiruddin, M. S. and Tomadi, Siti Haryani (2023) Influence of cutting edge radius (CER) and width of cut (WOC) on tool wear in milling SUS 316 stainless steel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9—10 August, 2022, Kuala Lumpur.

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Adesta, Erry Yulian Triblas (2011) Manufacturing management: from basic machining to quality product. IIUM Press, Kuala Lumpur. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Riza, Muhammad and Avicenna, Avicenna (2017) Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 327-333. ISSN 2302-9285

Alzaghir, Abdullah Faisal and Mat Nawi, Mohd Nazir and Gebremariam, M. A. and Azhari, Azmir (2022) Optimization of waterjet paint removal operation using artificial neural network. In: iM3F2021: Innovative Manufacturing, Mechatronics & Materials Forum 2021, 20th September 2021, Universiti Malaysia Pahang, Pekan (Virtual).

Arif, Afraha Baiti and Jamal, Parveen and Mirghani, Mohamed Elwathig Saeed (2010) Optimization of Glutathione (GSH) from selected Malaysian local fruit by ultrasonic method. In: International Conference on Food Research (ICFR 2010), 22 - 24 November 2010, Marriot Putrajaya, Malaysia.

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

B

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed (2014) Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 257-267. ISSN 0268-3768 E-ISSN 1433-3015

Bhuiyan, Moinul and Haga, Yoichi and Esashi, Masayoshi (2004) Optical switches for large core diameter optical fibers (POF & PCF). In: MOEMS Photonics West 2004, Jan 2004, USA.

C

Che Mustapha, Nurul Arfah and Jamal Ali, Nurulhusna (2021) Thermopile array sensor for children detection in automobile application. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), 22nd-23rd June 2021, Kuala Lumpur, Malaysia.

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2016) The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks. In: 7th CIRP Conference on High Performance Cutting, HPC 2016, 31st May-2nd June 2016, Chemnitz; Germany.

E

El-Sayed, Mohamed Hassan Attia and Ariff, Tasnim Firdaus and Noor Awalludin, Muhammad Mukhtar (2023) Development of framework for the management, handling system and maintenance in using hydrosurgery at hospitals. In: WJTA Conference and Expo 2023, 31 October - 1 November 2023, New Orleans, Louisiana.

H

Harun, Azmi and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily and Abdul Rahim, Yuzairi (2018) Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments. In: 3rd International Conference on Science, Technology and Interdisciplinary Research (IC-STAR 2017), 18th-20th Sept. 2017, Bandar Lampung, Indonesia.

Harun, Azmi and Che Haron, Che Hassan and A.Ghani, Jaharah and Mokhtar, Suhaily (2016) Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4761-4766. ISSN 1819-6608

Haszerin, Muhammad Na'iim and A. Raof, Natasha and M Zamre, M K A and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Machining performance of carbide insert in turning aluminum alloy 7075-T651. In: International Conference on Manufacturing Engineering Technology (ICONMET 2021), 14-15 July 2021, Asenia Resort, Langkawi, Malaysia.

J

Jamal, Parveen and Arif, Afraha Baiti and Mirghani, Mohamed Elwathig Saeed and Hashim, Yumi Zuhanis Has-Yun (2011) Optimization of Glutathione (GSH)production from selected Malaysian local fruits by ultrasonic method. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Jamal, Parveen and Hashim, Nurhasri Mulyadi and Jaswir, Irwandi (2011) Effect of homogenization in breaking protein-carotenoid complexes for releasing active compounds. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Jamal, Parveen and Mirghani, Mohamed Elwathig Saeed and Arif, Afraha Baiti (2010) Isolation of Reduced Glutathione (GSH) from local fruits by mechanical methods. In: IIUM Research, Innovation and Invention Exhibition 2010 (IRIIE 2010), 26th - 27th January 2010, IIUM, Kuala Lumpur. (Unpublished)

K

Khan, Md. Ashikur Rahman and Maleque, Md. Abdul and Rahman, M.M. Hafizur and Kadirgama, K. and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2). pp. 503-507. ISSN 2010-376X E-ISSN 2010-3778

Kok, Yew Ng and Chee, Pin Tan and Akmeliawati, Rini and Edwards, Christopher (2008) Disturbance decoupled fault reconstruction using sliding mode observers. In: 17th World Congress The International Federation of Automatic Control, 6-11th July 2008, Seoul, Korea.

M

MAT NAWI, MOHD NAZIR and Husin, Hafiz (2019) Investigation on the effect of multiple passes in plain waterjet cleaning of paint. In: 4th International Manufacturing Engineering Conference (IMEC2019) & 5th Asia Pasific Conference On Manufacturing System (APCOMS 2019), The Everly Hotel, Putrajaya, Malaysia. (Unpublished)

Maleque, Md. Abdul (2020) Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). Policy Paper. Department of Standards Malaysia, Cyberjaya, Selangor.

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.

Mamat, Ahmad Fadhli and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Rabe, Noor Suzilawati and Muda, Rahsidi Sabri and Md Amin, Mohamad Faiq (2020) Utilization of unmanned aerial vehicle (UAV) in dam disaster management: evacuation planning. International Journal of Technology Management and Information System, 2 (4). pp. 51-62. E-ISSN 2710-6268

Mat Nawi, Mohd Nazir and Husin, Hafiz and Gebremariam, M. A. and Azhari, Azmir (2020) Investigation on the effect of multiple passes in plain waterjet cleaning of paint. In: 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2019), 21st - 22nd August 2019, Putrajaya, Malaysia.

Mat Nawi, Mohd Nazir and Husin, Hafiz and Gebremariam, Mebrahitom Asmelash and Kushendarsyah, Saptaji and Azhari, Azmir (2024) Investigation on optimum waterjet cleaning parameters for minimum surface impact during paint removal from mild steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (2). pp. 11-28. ISSN 2289-7879

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Shah Abdullah, Norazharuddin and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. In: International Conference of X-Ray and Related Techniques 2016 (ICXRI 2016), 17th-18th August 2016, Dorsett Hotel, Putrajaya.

Mohd Khalil, Shaikh Sohel and Sahai, Rai Sujit Nath and Gulhane, Nitin Parashram and Pathan, Khizar Ahmed (2023) Experimental investigation of local Nusselt profile dissemination to augment heat transfer under air jet infringements for industrial applications. Semarak Ilmu Publishing, 112 (2). ISSN 2289-7879

Muda, Rahsidi Sabri and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Abdullah, Fatin Shahira (2021) Dam safety emergency action plan: a current practice for hydropower dam in Malaysia. In: 6th World Multidisciplinary Civil Engineering, Architecture: Urban Planning Symposium (WMCAUS 2021) ,, 14th-18th June 2021, Prague, Czech Republic.

Muhamad Khairussaleh, Nor Khairusshima and A.K., Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fiber reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference 2017, 11th-14th December 2017, Chennai; India.

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic under chilled air machining. Advances in Material & Processing Technologies. ISSN 1877-7058 (In Press)

Muhamad Khairussaleh, Nor Khairusshima and Zakwan, Muhammad Hafiz and Mokhtar, Suhaily and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri (2018) The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

P

Pang, Ming Meng and Koay, Seong Chun and Low, Jiun Hor and Buys, Yose Fachmi and Tshai, Kim Yeow (2018) Study on the plasticiser type for biobased microcrystalline cellulose filled polylactic acid composite. In: 5th International Conference on Process Engineering and Advanced Materials, ICPEAM 2018, 13th-14th August 2018, Kuala Lumpur.

S

Saleh, Tanveer and Bishwas, Indraneel and Rahman, Mustafizur (2010) Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back. International Journal of Advanced Manufacturing Technology, 46 (1-4). pp. 123-130. ISSN 1433-3015 (O); 0268-3768 (P)

Shahruddin, Najlah Sakinah and Mustaffa, Nur Haifa Syazwina and Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda (2021) An experimental study of tool wear during end milling of carbon fibre reinforced polymer in cutting fluid condition. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, UniMAP , Perlis.

T

Thriumani, Reena and Zakaria, Ammar and Jeffree, Amanina Iymia and Hishamuddin, N.A. and Omar, Mohammad Iqbal and Adom, Abdul Hamid and Shakaff, Ali Yeon and Kamarudin, Latifah Munirah and Yusuf, Nurlisa and Hashim, Yumi Zuhanis Has-Yun and Mohamed Helmy, Khaled (2014) Cancer detection using an electronic nose: A preliminary study on detection and discrimination of cancerous cells. In: 2014 IEEE International Conference on Biomedical Engineering and Sciences, 8th-10th December 2014, Miri, Sarawak.

W

Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Z

Za'bah, Nor Farahidah and Kwa, Kelvin S. K. and O'Neill, Anthony (2013) The study on the aspect ratio of Atomic Force Microscope (AFM) measurements for Triangular Silicon Nanowire. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), 25-27 September 2013, Langkawi, Malaysia. (In Press)

Za'bah, Nor Farahidah and Md Ralib @ Md Raghib, Aliza 'Aini and Kwa, Kelvin S. K. and O'Neill, Anthony (2018) Material characterization of a doped triangular silicon nanowire using raman spectroscopy. Advanced Science Letters, 24 (11). pp. 8962-8965. ISSN 1936-6612 E-ISSN 1936-7317