Items where Subject is "T Technology > TP Chemical technology > TP1080 Polymers, plastics and their manufacture"

A

A R, Toibah and Sopyan, Iis and Mel, Maizirwan (2008) Synthesis and characterization of magnesium doped biphasic calcium phosphate. The Medical Journal of Malaysia, 63 (Sup A). pp. 83-84. ISSN 0300-5283

Ab. Rahim, Rosminazuin and Bais, Badariah and Yeop Majlis, Burhanuddin and Sugandi, Gandi (2012) An alternative polymeric protection mask for bulk KOH etching of silicon. In: 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 25-27 April 2012, Cannes, France.

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2021) Poly(Lactic) acid reinforced with alkaline Lignin Biocomposites prepared by Thermal Extrusion for sustainable 3D printing process. In: 1st International Conference on Material Processing and Technology 2021 (ICMProTech), 14-15 July 2021, Perlis, Malaysia (Virtual).

Abdul Aziz , Radhiyah and Sopyan, Iis (2013) Photocatalytic decomposition of acetaldehyde gas on TiO2-SiO2 thin film photocatalyst ― a kinetic analysis. Indian Journal of Chemical Technology, 20 (2). pp. 137-144. ISSN 0975-0991 E-ISSN 0971-457X

Abdul Kadir@Jaafar, Muhammad Zamzuri and Ariannejad, Mohammad Mahdi and Samion, Muhamad Zharif and Tan, Chee Long and Ismail, Mohammad Faizal and Bayang, Leonard and Ahmad, Harith (2020) Narrow bandwidth optimization using a polymer microring resonator in a thulium–holmium fiber laser cavity. Optics Communications, 466. pp. 1-4. ISSN 0030-4018 E-ISSN 1873-0310

Abdullah, Aida Ashikin and Hassan, Norita and Hassan, Noor Azlina (2018) Influence of epoxidized palm oil on polyhydroxyalkanoates tensile properties. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 556-559. ISSN 2581-4311

Abu Ubaidah, Afiq Syazwan and Mohamad Puad, Noor Illi and Hamzah, Fazlena (2022) Characterization of bioplastic: a systematic review. In: 6th International Conference of Chemical Engineering & Industrial Biotechnology 2022, 15-16 August 2022, Virtual. (Unpublished)

Abu Ubaidah, Afiq Syazwan and Mohamad Puad, Noor Illi and Hamzah, Fazlena and Azmi, Azlin Suhaida and Ahmad Nor, Yusilawati (2024) Synthesis of bioplastics and the effects of additives on the mechanical, thermal and biodegradable properties. Polymers from Renewable Resources, 15 (4). pp. 430-490. ISSN 2041-2479 E-ISSN 2045-1377

Adekunle Alli, Yakubu and Adewuyi, Sheriff and Saheed Bada, Babatunde and Sabu Thomas, Sabu and Anuar, Hazleen (2021) Quaternary Trimethyl Chitosan Chloride Capped Bismuth Nanoparticles with Positive Surface Charges: Catalytic and Antibacterial Activities. Journal of Cluster Science.

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposite for packaging industry. Journal of Advanced Research in Materials Science, 50 (1). pp. 19-25. ISSN 2289-7992

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida (2018) Preparation and characterization of PLA/algae nanocomposites for packaging industry. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Hasham, Rosnani (2019) Biodegradable polymer composite for cosmetic patch. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 49-64. E-ISSN 2637-0719

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Hasham, Rosnani and Hafiz Idris, Mohamad Khairul (2020) Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers, 12 (8). pp. 1-11. E-ISSN 2073-4360

Ahmad, Farah and Mohd Hatta, Maziati Akmal (2020) Bionanomaterial thin film for piezoelectric applications. In: Advances in nanotechnology and its applications. Springer, Singapore, Singapore, pp. 63-82. ISBN 978-981-15-4741-6

Ahmad, Mohd Shahrulnizam and Rasit Ali, Roshafima and Mohamad, Zurina and Ahmad Tarmizi, Zatil Izzah and Ghazali, Siti Khairunisah and Munthoub, Dayangku Intan and A. Majid, Rohah and Ali, Fathilah and Hasham, Rosnani and Nazree, Anne Aleesa (2023) Fabrication of starch-based packaging materials. Physical Sciences Reviews. E-ISSN 2365-659X

Ahmad Nor, Yusilawati and Mel, Maizirwan and Mohd. Salleh, Hamzah and Ng, Kim Hong and Wong, Chiow San (2010) Surface modification of polystyrene beads by ultraviolet/ozone treatment and its effect on gelatin coating. American Journal of Applied Sciences, 7 (6). pp. 724-731. ISSN 1546-9239

Ahmad Nor, Yusilawati and Mel, Maizirwan and Sopyan, Iis and Mohd. Salleh, Hamzah and Ng, K.H. and Wong, Chiow San (2009) Fabrication system for surface modification of polystyrene beads by UV/Ozone treatment and its characterization. In: Advances in Materials and Processing Technologies, 26th-29th October 2009, Kuala Lumpur. (Unpublished)

Ali, Fathilah (2019) Becoming a zero single use plastic nation. Star Online.

Ali, Fathilah and Anuar, Hazleen and Awale, Rania J. (2015) Flexible and biodegradable film for environmental friendly packaging material. In: IIRIE 2015, CAC Gombak.

Ali, Fathilah and Anuar, Hazleen and Jamaluddin, Jamarosliza (2018) Structural, thermal, mechanical and rheological properties of polylactic acid/epoxidized soybean oil/organoclay blends. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-8. ISBN 978-0-12-803581-8 (In Press)

Ali, Fathilah and Awale, Raina Jama and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin (2016) Preparation and characterization of plasticized polylactic acid/starch blend. Jurnal Teknologi, 78 (11-2). pp. 7-12. E-ISSN 2180–3722

Ali, Fathilah and Awale, Raina Jama and Mohamad, Nur Lisa Farhana and Ismail, Norshafiq (2016) Sustainable biopolymers for environmental friendly packaging materials. In: Invention, Innovation and Design Exposition (IIDEX) 2016, 20th-23rd September 2016, Shah Alam, Selangor. (Unpublished)

Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Characterization of polylactic acid/organoclay nanocomposites. In: Advances in nanotechnology and its applications. Springer, Singapore, pp. 107-114. ISBN 978-981-15-4741-6

Ali, Fathilah and Jamaluddin, Jamarosliza and Upadhyay, Arun Kumar (2014) Poly(lactic acid) based flexible films. International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering , 8 (5). pp. 425-428.

Ali, Fathilah and Kang, Dong Jin and Kim, Minsoo P and Cho, Chul-Hee and Kim, Bumjoon J (2014) Synthesis of biodegradable and flexible, polylactic acid based, thermoplastic polyurethane with high gas barrier properties. Polymer International, 63 (6). pp. 1620-1626. ISSN 1097-0126

Ali, Fathilah and Long, JiaJia and Wan Salim, Wan Wardatul Amani (2017) Electrochemical characterization of polylactic acid-block-poly (2-vinylpyridine)/gold nanoparticle composites for glucose biosensor development. IIUM Engineering Journal, 18 (2). pp. 34-41. ISSN 1511-788X E-ISSN 2289-7860

Ali, Fathilah and Mohan, Raja (2010) Thermal, mechanical, and rheological properties of biodegradable polybutylene succinate/carbon nanotubes nanocomposites. Polymer Composites , 31 (8). pp. 1309-1314. ISSN 1548-0569

Ali, Fathilah and Upadhyay, Arun Kumar (2014) Preparation of flexible PLA films using novel plasticizers. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur.

Ali, Fathilah and Anuar, Hazleen and Fakhruldin, Hanan (2015) Plasticizing Poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material. In: Malaysia Polymer International Conference (MPIC 2015), 10th-11th June 2015, Palm Garden Hotel, IOI Resort, Putrajaya. (Unpublished)

Ali, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Dannoun, Elham M.A and Mohammed, Sewara J. and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan (2020) Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap. Scientific Reports, 10 (1). pp. 1-17. E-ISSN 2045-2322

Ali, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi and Ali, Fathilah and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) Effect of freeze-dried durian skin nanofiber on the physical properties of poly(lactic acid) biocomposites. Polymer Composite. ISSN 0272-8397 E-ISSN 1548-0569 (In Press)

Alli, Yakubu Adekunle and Adewuyi, Sheriff and Bada, Babatunde Saheed and Thomas, Sabu and Anuar, Hazleen (2022) Quaternary trimethyl chitosan chloride capped bismuth nanoparticles with positive surface charges: catalytic and antibacterial activities. Journal of Cluster Science, 33 (5). pp. 2311-2324. ISSN 1040-7278 E-ISSN 1572-8862

Alli, Yakubu Adekunle and Bamisaye, Abayomi and Nancy, Parvathy and Zachariah, Suji Mary and Oladoye, Peter and Bankole, Owolabi Mutolib and Akamo, Damilola O. and Chkirida, Soulaima and Anuar, Hazleen and Thomas, Sabu (2024) MXene composites: properties, synthesis and its emerging application in rechargeable batteries. Journal of Energy Storage, 77. pp. 1-21. ISSN 2352-152X E-ISSN 2352-1538

Alli, Yakubu Adekunle and Anuar, Hazleen and Manshhor, Mohd Romainor and Okafor, Christian Emeka and Kamarulzaman, Amjad Fakhri and Akcakale, Nurettin and Mohd Nazeri, Fatin Nurafiqah and Bodaghi, Mahdi and Suhr, Jonghwan and Mohd Nasir, Nur Aimi (2024) Optimization of 4D/3D printing via machine learning: a systematic review. Hybrid Advances. E-ISSN 2773-207X

Amir, Shahrul and Mohamed, Nor Sabirin and Subban, Ri Hanum Yahaya (2010) Studies on PEMA based solid polymer electrolytes. Advanced Materials Research, 93 (94). pp. 381-384. ISSN 1022-6680

Amran, Anisah and Ahmad, Farah and Mat Harttar @ Mohd Hatta, Maziati Akmal and Md Ralib @ Md Raghib, Aliza 'Aini and Suhaimi, Muhammad Irsyad (2021) Biosynthesis of thin film derived from microbial chitosan for piezoelectric application. Materials Today Communications, 29. pp. 1-11. ISSN 2352-4928

Anuar, Hazleen and Abd Rahman, Nurul Amirah and Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Alimi, Oyekunle Azeez and Alif, Fathilah and Suhr, Jonghwan (2023) Novel soda lignin/PLA/EPO biocomposite: a promising and sustainable material for 3D printing filament. Materials Today Communications, 35. pp. 1-14. ISSN 2352-4928

Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Effect of processing parameters on the tensile properties of TPNR reinforced short carbon fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 11-15. ISBN 9789674181673

Anuar, Hazleen and Aimi, N. Nur and Manshor, M.R. and Wan Nazri, W.B. and Mohd Salit, Sapuan (2014) Optimizing the parameters in durian skin fiber reinforcedpolypropylene composites by response surface methodology. Industrial Crops and Products, 54. pp. 291-295. ISSN 0926-6690

Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7

Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd Sidi, Nor Hanis (2010) Lactic acid production from Kenaf fibre. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Anuar, Hazleen and Mohd Nasir,, Nur Aimi and El-Shekeil, Yousuf (2015) Effects of coupling agent on the properties of durian skin fibre filled polypropylene composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (12). pp. 1261-1265.

Anuar, Hazleen and Razali, Mohd Syafiq and Saidin, Hafizul Adzim and Badrul Hisham, Ammelia Fazlina and Mohd Apandi, Siti Nur E’zzati and Ali, Fathilah (2016) Tensile properties of durian skin fibre reinforced plasticized polylactic acid biocomposites. International Journal of Materials and Manufacture [IJEMM], 1 (1). pp. 16-20. E-ISSN 0128-1852

Arifutzzaman, A and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2019) Investigation of extraction yields of exfoliated graphene in deionized water from organic solvents. International Journal of Technology, 10 (6). pp. 1251-1259. ISSN 2086-9614

Asem, Maimunah and Jimat, Dzun Noraini (2018) Antimicrobial properties of composite film based polyvinyl alcohol/starch/nanocellulose from sugarcane bagasse coated with essential oil. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Asem, Maimunah and Jimat, Dzun Noraini and Jafri, Nur Huda Syazwani and Wan Nawawi, Wan Mohd Fazli and Mohamed Azmin, Nor Fadhillah and Abd Wahab, Mohd Firdaus (2023) Entangled cellulose nanofibers produced from sugarcane bagasse viaalkaline treatment, mild acid hydrolysis assisted with ultrasonication. Journal of King Saud University - Engineering Sciences (JKSUES), 35 (1). pp. 24-31. ISSN 1018-3639

Asem, Maimunah and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Sulaiman, Sarina (2021) Antibacterial, mechanical and thermal properties of PVA/Starch composite film reinforced with Cellulose Nanofiber of Sugarcane Bagasse. Arabian Journal for Science and Engineering. ISSN 2193-567X

Asem, Maimunah and Wan Nawawi, Wan Mohd Fazli and Jimat, Dzun Noraini (2018) Evaluation of water absorption of polyvinyl alcohol-starch biocomposite reinforced with sugarcane bagasse nanofibre: Optimization using two-level factorial design. In: Wood and Biofiber International Conference (WOBIC2017), 21st-23rd November 2017, Putrajaya, Malaysia.

Asraf, Nur Heena and Adli, Sarah Amalina and Barre, Mohamed Soleiman and Ali, Fathilah and Anuar, Hazleen (2019) Degradation properties of biodegradable polymers. Journal of Wastes and Biomass Management (JWBM), 1 (2). 05-08. ISSN 2710-6012

Awale, Raina Jama and Ali, Fathilah and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Anuar, Hazleen and Hassan, Azman (2018) Enhanced flexibility of biodegradable polylactic acid/starch blends using epoxidized palm oil as plasticizer. Polymers, 10 (9). pp. 1-12. ISSN 2073-4360

Azmi, Azlin Suhaida and Fatah Yasin, Raudlotul Firdaus and Zainan Nazri, Nurul Jannah (2020) Towards a sustainable campus: zero single-use plastic campaign. In: Spirituality and sustainability: experiences of the International Islamic University Malaysia. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 160-173. ISBN 9789674910488

B

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Abdulwahid, Rebar T. and Hadi, Jihad M. (2021) Electrochemical impedance spectroscopy as a novel approach to investigate the influence of metal complexes on electrical properties of poly (vinyl alcohol)(PVA) composites. International Journal of Electrochemical Science, 16. pp. 1-21. ISSN 1452-3981

Buys, Yose Fachmi and Anuar, Hazleen (2018) Morphology and electrical properties of polylactide / natural rubber blend filled with conductive nano carbon. Research Report. UNSPECIFIED. (Unpublished)

Buys, Yose Fachmi and Anuar, Hazleen (2018) Study on miscibility and degradation behavior of polylactic acid / thermoplastic polyurethane blends. Project Report. UNSPECIFIED. (Unpublished)

Buys, Yose Fachmi and Aznan, Aisyah Nur Atiqah and Anuar, Hazleen (2018) Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Buys, Yose Fachmi and Lokman, Nor Afiza Syafina (2014) Conductive polymer composites from polylactic acid/Natural rubber filled with carbon black. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd-25th Sept. 2014, Kuala Lumpur. (Unpublished)

Buys, Yose Fachmi and Lokman, Nor Afiza Syafina (2015) Conductive polymer composites from polylactic acid/natural rubber filled with carbon black. Advanced Materials Research, 1115. pp. 253-257. ISSN 1022-6680

Buys, Yose Fachmi and Mawardi, Munirah Afiqah and Anuar, Hazleen (2018) Selective localization of multi-walled CNT in polylactic acid /thermoplastic polyurethane blends and its effect on mechanical properties. Current Nanomaterials, 2 (2). pp. 84-89. ISSN 2405-4615 E-ISSN 2405-4623

Buys, Yose Fachmi and Mohd Lazim, Nurul Hakimah (2015) Conductive polymer composites from plasticized polylactic acid/carbon black. In: Malaysia Polymer International Conference 2015 (MPIC 2015), 10th-11th June 2015, Putrajaya, Malaysia. (Unpublished)

Buys, Yose Fachmi and Udin, Nur Suhaida (2015) Conductive polymer composites from polylactic acid/thermoplastic polyurethane filled with carbon black. In: The 4th Federation of Asian Polymer Societies - International Polymer Congress (4FAPS-IPC 2015), 5 - 8 October 2015, Kuala Lumpur, Malaysia. (Unpublished)

C

Chee, Ching Yern and Yaacob, Iskandar Idris (2010) Influence of nanosilica/polyurethane composite coating on IR effectiveness and visible light transmission properties of polyethylene. Advanced Materials Research, 97-101. pp. 1669-1672. ISSN 1022-6680

Choi, Garam and Ali, Fathilah and Kim, Kyoungho and Kim, Minsoo P. (2024) Advancements in binary solvent-assisted hydrogel composites for wearable sensing applications. Materials, 17 (22). pp. 1-35. E-ISSN 1996-1944

G

Ghazali, Siti Khairunisah and Adrus, Nadia and A. Majid, Rohah and Ali, Fathilah and Jamaluddin, Jamarosliza (2021) UV-LED as a new emerging tool for curable polyurethane acrylate hydrophobic coating. Polymers, 13 (4). p. 487. ISSN 2073-4360

H

Hassan, Noor Azlina and Hassan, Norita (2011) Polymer clay nanocomposite: Part 1. In: Advance in Materials Engineering. IIUM Press, Kuala Lumpur, pp. 6-10. ISBN 9789674181673

Hassan, Noor Azlina and Hassan, Norita (2011) Polymer clay nanocomposites: part I. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 6-10. ISBN 9789674181673

Hassan, Norita (2018) Study on the novel binder based biodegradable polyhyroxyalkanoates (PHA) for metal injection moulding application. Research Report. UNSPECIFIED. (Unpublished)

Hazmi, Alia Tasnim and Ahmad, Farah and Mohd Hatta, Maziati Akmal and Md Ralib, Aliza Aini (2021) Microbial chitosan for the fabrication of piezoelectric thin film. In: The 6th International Online Conference on Science, Technology, and Interdisciplinary Research 2020, Kuala Lumpur.

Ho, Chit Seng and Zainal Abidin, Nur Hafizah and Nugraha, Muhammad Wahyu and Sambudi, Nonni Soraya and Ali, Fathilah and Wirzal, Mohd Dzul Hakim and Kasmiarno, Laksmi Dewi and Adli, Sarah Amalina (2020) Electrospun porous polylactic acid fibers containing CdS for degradation of methylene blue. Fibers and Polymers, 21 (6). pp. 1212-1221. ISSN 1229-9197 E-ISSN 1875-0052

Huzaifah, M. R.M. and Mohd Sapuan, Salit and Leman, Z. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105 E-ISSN 1573-6113

I

Ibrahim, Nor Azowa and Wan Yunus, Wan Md Zin and Othman, Maizatulnisa and Abdan, Khalina (2011) Effect of chemical surface treatment on the mechanical properties of reinforced plasticized poly(lactic acid) biodegradable composites. Journal of Reinforced Plastics & Composite, 30 (5). pp. 381-388. ISSN 0731-6844 E-ISSN 1530-7964

Ismail, Muhamad Norshafiq and Rafidi, Najihah and Awale, Raina Jama and Ali, Fathilah (2017) Preparation and characterization of polylactic acid based polyurethane for environmental friendly packaging materials. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 38 (1). pp. 16-21. ISSN 2289-7879

J

Jaafar, Awanis and Sofian, Anis Sofia and Samat, Noorasikin (2012) Effect of coupling agent on mechanical properties of composite from microcrystalline cellulose and recycled polypropylene. Advanced Materials Research, 576. pp. 390-393. ISSN 1022-6680

Jafri, Nur Huda Syazwani and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Ahmad Nor, Yusilawati and Amid, Azura (2024) Effect of incorporating cellulose nanofibers and lemongrass essential oil in polyvinyl alcohol-polyethylene glycol/glycerin hydrogel for wound dressing. IIUM Engineering Journal, 25 (2). pp. 99-115. ISSN 1511-788X E-ISSN 2289-7860

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effect of maleic anhydride polyethylene on damping properties of HDPE/EPDM nanocomposite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 16-21. ISBN 9789674181673

Jamaluddin, Muhammad Nazrul Hisyam and Mohd Salleh, Mohd Hazimin and Zulkifli, Mohd Zamani (2023) Investigation of strain measurement on paper-based strain sensor using carbon electrical conductive paint. In: 7th International Conference on Advancement in Science and Technology 2021, Kuantan, Malaysia.

Jame, Raina and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin and Ali, Fathilah (2015) Preparation and characterization of plasticized Polylactic acid/starch blend. In: 5th International Conference on Advancement in Science and Technology (iCAST 2015), 10th-12th August 2015, Kuantan, Pahang. (Unpublished)

Jia, Wei Lee and Syed Bakar, Sharifah Shahnaz and Ahmad Zaidi, Nur Hidayah and Yahud, Shuhaida and Samat, Noorasikin (2021) Effect of carbon nanotube loading on electrical properties of electrospun polyvinylidene fluoride (PVDF) fiber. In: 1st International Conference on Green Materials, Processing and Characterization 2021 (ICOGMPAC 2021), 12 October 2021, Perlis, Malaysia (Virtual).

Jimat, Dzun Noraini and Ahmad Nor, Yusilawati and Mohamad Puad, Noor Illi (2023) Review on sago thermoplastic starch composite films reinforced with nanocellulose. In: Nanocellulose-Reinforced Thermoplastic Starch Composites: Sustainable Materials for Packaging. Walter de Gruyter GmbH, Berlin/Boston, pp. 1-6.

Jimat, Dzun Noraini and Anuar, Hazleen and Sulaiman, Sarina and Samat, Noorasikin and Wan Salim, Wan Wardatul Amani and Asem Shehadeh Saleh Ali, Maimunah and Syed Putra, Sharifah Shahira (2018) Development of bionanocomposite reinforced with sugarcane bagasse nanocellulose and incorporated with natural antimicrobial agent for food packaging applications. Project Report. UNSPECIFIED. (Unpublished)

Jimat, Dzun Noraini and Ariffin, Faridah and Asem, Maimunah and Sulaiman, Sarina (2017) Characterization of biodegradable composite based on polycaprolactone/starch reinforced with sugarcane bagasse microfibrillated cellulose. Journal of Advanced Research in Materials Science, 39 (1). pp. 32-39. ISSN 2289-7992

Jimat, Dzun Noraini and Sulaiman, Sarina and Ahmad Nor, Yusilawati and Mohamed Azmin, Nor Fadhillah and Syed Putra, Sharifah Shahira (2019) Physicochemical characteristics of bionanocomposites, polycaprolactone/starch/cocoa pod husk microfibrillated cellulose. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 199-208. ISSN 2289-7879

Jimat, Dzun Noraini and Syed Putra, Sharifah Shahira and Jamal, Parveen and Wan Nawawi, Wan Mohd Fazli and Jami, Mohammed Saedi (2020) Effect of y-methacryloxypropyltrimethoxysilane (MPS) and tetraethoxysilane (TEOS) towards preparation of oil absorbent foams from polyvinyl alcohol (PVA) reinforced with microfibrillated cellulose (MFC). Journal of Renewable Materials, 8 (7). pp. 739-757. ISSN 2164-6325 E-ISSN 2164-6341

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza and Hasham, Rosnani (2024) Microencapsulation of Acalypha indica Linn. Extracts using chitosan-polycaprolactone blends. Pertanika Journal of Science & Technology, 32 (2). pp. 741-760. ISSN 0128-7680 E-ISSN 2231-8526

Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Jamaluddin, Jamarosliza and Hasham, Rosnani (2021) The potential encapsulation of euphorbiaceae plant extracts: a review. Journal of Polymer Science and Technology, 6 (2). pp. 11-19. ISSN 2550-1917

Johari, Maizatul Akmal and Azmi, Azlin Suhaida and Jamaluddin, Jamarosliza and Hasham, Rosnani and Chee, Chin Fei and Ali, Fathilah (2021) Comparison study between encapsulation of Acalypha indica Linn extracts with Chitosan-PCL and Chitosan-OA. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

K

Khalid, Khalisanni and Mohd Noh, Muhammad Azri and Khan, M. Niyaz and Ishak, Ruzaina and Penney, Esther and Chowdhury, Zaira Zaman and Hamzah, Mohammad Hafiz and Othman, Maizatulnisa (2017) Giant Vesicles (GV) in colloidal system under the Optical Polarization Microscope (OPM). Micron, 100. pp. 30-33. ISSN 0968-4328

Kherchi, Asma and Ali, Fathilah and Azmi, Azlin Suhaida and Ahmad, Farah and Anuar, Hazleen (2023) Effect of Polylactic Acid (PLA) concentrations on tensile properties for transdermal patch. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

L

Lazim, Nurul Hakimah and Samat, Noorasikin (2019) The influence of irradiated recycled polypropylene compatibilizer on the impact fracture behavior of recycled polypropylene/microcrystalline cellulose composites. Polymer Composites, 40. E24-E34. ISSN 0272-8397 E-ISSN 1548-0569

Leman, Zulkiflle and Sapuan, Salit Mohd and Azwan, M. and Ahmad, Megat Mohamad Hamdan Megat and Maleque, Md. Abdul (2008) The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6). pp. 606-612. ISSN 0360-2559

Lenda, T.A. and Mridha, Shahjahan (2011) Influence of moisture absorption on impact strength and failure behavior of Hybrid Jute-Carbon/Epoxy composite. Advanced Materials Research, 264/65. pp. 457-462. ISSN 1022-6680

M

Maleque, Md. Abdul and A., Atiqah (2013) Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials. The Arabian journal for science and engineering , 38 (11). pp. 3191-3199. ISSN 1319-8025

Maleque, Md. Abdul and A., Atiqah and Iqbal, M. (2013) Development of kenaf hybrid composite for structural applications. In: IRIIE 2013, 19-20 February 2013, Cultural Activities Centre , International Islamic Univesity Malaysia. (Unpublished)

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Mohammad Ismail, Mohammad Abul Fazal and Iqbal, M. M. and Paruka, Perowansa (2015) Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research, 1115. pp. 266-269. ISSN 1022-6680

Mat Zin, Mizan Izzati and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli (2021) Physicochemical properties of fungal chitin nanopaper from shiitake (L. edodes), enoki (F. velutipes) and oyster mushrooms (P. ostreatus). Carbohydrate Polymer, 281. pp. 1-7. ISSN 0144-8617 E-ISSN 1879-1344

Mat Zin, Mizan Izzati and Shamsudin, Nurul Syazana and Ali, Fathilah and Wan Nawawi, Wan Mohd Fazli (2021) Chitin fiber from mushroom as reinforcement for biobased polymer. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Mat Zin, Mizan Izzati and Suratem, Muhammad Azammuddin and Wan Nawawi, Wan Mohd Fazli (2021) Influence of the pre-treatment of nanofibers obtained from mushrooms on the mechanical properties of the paper. Polimery, 66 (9). pp. 1-6. ISSN 0032-2725

Mohamad, Nur Lisa Farhana and Ali, Fathilah and Azmi, Azlin Suhaida and Barre, Mohamed Soleiman and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Enhanced flexibility of polylactic acid/epoxidized palm oil/pineapple fiber composites. Biological And Natural Resources Engineering Journal, 3 (1). pp. 1-7. E-ISSN 2637-0719

Mohamad, Souad A. and Buys, Yose Fachmi and Hadzari , Muhammad Hazwan and Othman, Maizatulnisa (2015) A light material for wind turbine blades. Advanced Materials Research, 1115. pp. 308-313. ISSN 1662-8985

Mohan, Raja and Ali, Fathilah (2023) The future of energy harvesting: a brief review of MXenes-based triboelectric nanogenerators. Polymers for Advanced Technologies, 34 (10). pp. 3193-3209. ISSN 1042-7147 E-ISSN 1099-1581 (In Press)

Mohan, Raja and Subha, J. and Alam, Javed and Ali, Fathilah (2016) Influence of multiwalled carbon nanotubes on biodegradable Poly(lactic acid) nanocomposites for electroactive shape memory actuator. Advances in Polymer Technology. pp. 1-6. E-ISSN 1098-2329 (In Press)

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah and Buys, Yose Fachmi and Othman, Rashidi (2018) Effect of supercritical carbon dioxide on tensile Properties of Durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, Special issue. pp. 197-202. E-ISSN 2581-4311

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Buys, Yose Fachmi and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshor, Mohd Romainor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Mohd Hatta, Farah Ayuni and Othman, Rashidi and Ramya, Razanah and Wan Sulaiman, Wan Syibrah Hanisah and Mohd Latif, Nur Hanie (2021) Crocin production and its prospect as biocolorant in polymer products. In: Agricultural Research Updates. Nova Science Publishers, Inc, New York, pp. 153-178.

Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis and Khasri, Azduwin (2017) The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites. Plastics, Rubber and Composites, 46 (10). pp. 421-430. ISSN 1465-8011 E-ISSN 1743-2898

Mohd Nasir, Najaa Fadhilah and Hasham, Rosnani and Sabtu, Rahimah and Ali, Fathilah and Adrus, Nadia and Jamaluddin, Jamarosliza and Abdul Rahman, Roshanida and Abdul Hamid, Mariani and Yaakob, Harisun (2023) Characterization and stability assessment of Ocimum gratissimum leaves extract loaded nanostructured lipid carrier. Environment Quality Management, 33 (3). pp. 361-369. ISSN 1088-1913 E-ISSN 1520-6483

Mohd Nasir, Nur Aimi and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohamed, Nurhafizah Seeni and Mohd Ithnin, Ahmad Fitrie and Uyup, Mohd Khairun Anwar (2014) Study of chemical and thermal properties of kenaf biomass-based polylactic acid (PLA). Advances in Environmental Biology, 8 (3 Spec. Issue). pp. 633-638. ISSN 1995-0756 E-ISSN 1998-1066

Mohd Nizam, Najiha Syahida and Wan Nawawi, Wan Mohd Fazli and Rosli, Wan Amalina and Zailin, Ira Shahira (2018) Optimization Study of Decolorization Process of Oyster Mushroom's Chitin Thin Film. In: International Conference Biotechnology Engineering 2018 (ICBioE '18), International Islamic University Malaysia.

Mohd Razali, Nur Izzati and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2022) Polyurethane: green chemistry synthesis, application and biodegradability - a review. Journal of Polymer Science and Technology, 7 (1). pp. 13-30. ISSN 2550-1917

Mohd Razali, Nur Izzati and Ali, Fathilah and Azmi, Azlin Suhaida and Tuan Ismail, Tuan Noor Maznee and Mirghani, Mohamed Elwathig Saeed and Omar, Mohamad Firdaus (2021) Microwave-assisted synthesis of polylactic acidDiol for polyurethane as biodegradable packaging material. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Mohd Zaki, Syazwani and Musa, Sharan (2023) Investigation of microgels and double crosslinked microgels containing 2-carboxyethyl acrylate (CEA). In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mridha, Shahjahan (2011) Quality of copper film electroplated on silicon wafer using different current densities. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 28-38. ISBN 9789674181673

Mridha, Shahjahan and Lenda, T.A. (2011) Impact strength of Carbon Reinforced Epoxy Composite at different temperatures. Advanced Materials Research, 264-26. pp. 451-456. ISSN 1662-8985

Murugaya, Kartigesan and Misdan, Nurasyikin and Awang, Nuha and Ling, How Hua and Madon, Rais Hanizam and Hairom, Nur Hanis Hayati and Razali, Nor Faizah and Yusof, Norhaniza and Jaafar, Juhana and Md Nordin, Nik Abdul Hadi and Ali, Fathilah (2024) Preparation and characterizations of triptycene integrated poly (arylene ether sulfone) based block and random copolymers. International Journal of Engineering Trends and Technology, 72 (2). pp. 133-141. ISSN 2231–5381

N

Nazree, Anne Aleesa and Adrus, Nadia and Ab Muis, Zarina and Hashim, Haslenda and Baharulrazi, Norfhairna and Che Man, Siti Hajjar and Zainal Alam, Muhd Nazrul Hisham and A. Majid, Rohah and Johnson, Edwina and Abdullah, Abdul Razak and Chuprat, Bahrul Razha and Ali, Fathilah and Jamaluddin, Jamarosliza (2021) Mechanical and biodegradation properties of fresh and rotten jicama starches based bioplastics. Environmental Quality Management. pp. 1-10. ISSN 1520-6483

Nazree, Anne Aleesa and Adrus, Nadia and Ab Muis, Zarina and Hashim, Haslenda and Baharulrazi, Norfhairna and Che Man, Siti Hajjar and Zainal Alam, Muhd Nazrul Hisham and A. Majid, Rohah and Johnson, Edwina and Abdullah, Abdul Razak and Chuprat, Bahrul Razha and Ali, Fathilah and Jamaluddin, Jamarosliza (2022) Mechanical and biodegradation properties of fresh and rotten jicama starches based bioplastics. Environmental Quality Management, 32 (1). pp. 355-364. ISSN 1088-1913 E-ISSN 1520-6483

Nik Abdul Ghani, Nik Rashida and Jami, Mohammed Saedi and Alam, Md. Zahangir and Engliman, Nurul Sakinah (2023) Investigation of fouling mechanism on graphene oxide polyethersufone nanocomposite adsorptive membrane. Journal of Engineering Science and Technology, 18 (5). pp. 2672-2687. ISSN 1823-4690

Nugraha, Muhammad Wahyu and Wirzal, Mohd Dzul Hakim and Ali, Fathilah and Roza, Liszulfah and Sambudi, Nonni Soraya (2021) Electrospun polylactic acid/tungsten oxide/amino-functionalized carbon quantum dots (PLA/WO3/N-CQDs) fibers for oil/water separation and photocatalytic decolorization. Journal of Environmental Chemical Engineering, 9 (5). pp. 1-14. ISSN 2213-3437

O

Olalekan, Salawudeen Taofeeq and Muyibi, Suleyman Aremu and Shah, Qasim Hussain and Al-Khatib, Ma'an Fahmi Rashid and Yusof, Faridah and Qudsieh, Isam Y. (2010) Improving the polypropylene-clay composite using carbon nanotubes as secondary filler. Energy Research Journal, 1 (2). pp. 68-72. ISSN 1949-016x (O), 1949-0151 (P)

Omar, Mohamad Firdaus and Ali, Fathilah and Jami, Mohammed Saedi and Azmi, Azlin Suhaida and Ahmad, Farah and Marzuki, Mohd Zahid and Jamaluddin, Jamarosliza (2024) Continuous flow bead-milling impact on sulfur curing for advanced elastomeric rubber composites. IIUM Engineering Journal, 25 (2). pp. 83-98. ISSN 1511-788X E-ISSN 2289-7860

Omar, Mohamad Firdaus and Ali, Fathilah and Tukiman, Fatehannie and Al-Khatib, Ma'an Fahmi Rashid and Anuar, Hazleen (2025) The influence of coated-carbon nanofiber (cCNF) in styrene-butadiene rubber (SBR) for potential application in automotive components. In: Rubber Composites: Recycling, Processing, Properties, Design and Applications. Woodhead Publishing in Materials, United States, pp. 213-221. ISBN 978-0-443-23620-4

Othman, Maizatulnisa (2010) Poly(Lactic Acid) (PLA)-reinforced Kenaf Bast Fiber Composites: The Effect of Triacetin. Journal of REINFORCED PLASTICS AND COMPOSITES, 29 (7). pp. 1099-1111. ISSN 0731-6844

Othman, Maizatulnisa and Hashim, Mohd Yusoff and Ibrahim, Nor Azowa and Khalid, Khalissani and Al-Bat'hi, Souad A. M. (2015) Polyhydroxybutrate filled clamshell biofiller: effect of polyvinylpyrrolidone. Advanced Materials Research, 1115. pp. 296-299. ISSN 1022-6680

Othman, Maizatulnisa and Mohamad, Souad A. and Jamal, Nur Ayuni Jamal (2017) RIGS16-176-0340/The studies on environmentally safe biopolymer derived from natural based algae. Project Report. UNSPECIFIED. (Unpublished)

Othman, Maizatulnisa and Rashid, Haziq and Jamal, Nur Ayuni and Shaharuddin, Sharifah Imihezri and Sulaiman, Sarina and Hairil, H. Saffiyah and Khalid, Khalisanni and Zakaria, Nazarudin (2019) Effect of cinnamon extraction oil (CEO) for algae biofilm shelf-life prolongation. Polymers, 11 (1). pp. 1-10. ISSN 2073-4360

Othman, Rashidi and Ramya, Razanah and Mohd Latiff, Nur Hanie and Wan Sulaiman, Wan Syibrah Hanisah and Mohd Hatta, Farah Ayuni and Mat Ali, Qurratu Aini and Mat Jusoh, Nor Hafizana (2022) Mitigation of the micro- and nano plastic using phycoremediation technology. In: Impact of Plastic Waste on the Marine Biota. Springer Nature Singapore Pte Ltd, SINGAPORE, pp. 183-209. ISBN 978-981-16-5402-2

P

Pairon, Mohammad Shahrizad and Abdul Rahman, Nurul Amirah and Ali, Fathilah and Anuar, Hazleen and Suhr, Jonghwan (2022) Characterization of dioxane-based and soda-based extraction of lignin from oil palm empty fruit bunches as reinforcement in polylactic acid bio-composite. Bioresource Technology Reports, 20. ISSN 2589014X

Pairon, Mohammad Shahrizad and Ali, Fathilah and Ahmad, Farah and Anuar, Hazleen and Abdul Rahman, Nurul Amirah and Mirghani, Mohamed Elwathig Saeed and Suhr, Jonghwan and Thomas, Sabu (2022) Review on solvent extraction methods of Lignin from Oil Palm Empty Fruit Bunches (OPEFB). Journal of Natural Fibers. ISSN 1544-0478 E-ISSN 1544-046X (In Press)

Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen (2021) Degradation study of polylactic acid, spirulina, and alginate composites in cosmetic application. Biological And Natural Resources Engineering Journal, 5 (1). pp. 45-52. E-ISSN 2637-0719

Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Jonghwan, Suhr and Mirghani, Mohamed Elwathig Saeed (2021) Reinforcement of Polylactic acid (PLA) biocomposite with lignin from oil palm empty fruit bunches (OPEFB) for 3D printing application. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Paruk, Perowansa Paruk and Siswanto, Waluyo Adi and Maleque, Md. Abdul and Mohd Shah, Mohd Kamal (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force. Journal of Mechanical Science and Technology, 29 (5). pp. 1941-1953. ISSN 1976-3824 (O), 1738-494X (P)

Paruka, Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research, 1115. pp. 288-291. ISSN 1022-6680

Paruka , Perowansa and Mat Yasin, Md Hafizil and Mamat, Rizalman and Maleque, Md. Abdul and Md Shah, Md Kamal (2015) Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115. pp. 258-261. ISSN 1022-6680

R

Razali, Muhammad Sufi Iqbal and Hassan, Norita and Hassan, Noor Azlina (2020) Effects of Epoxidized Palm Oil (EPO) on mechanical properties of Polyhydroxyalkanoates (PHA). TEST Engineering & Management, 83 (May – June 2020). pp. 1438-1455. ISSN 0193-4120

S

Sabaruddin, Fatimah A'thiyah and Samat, Noorasikin and Abang Ismawi Hassim, Dayang Habibah (2015) The effects of coupling agent on the flame retardant properties of PP/ATH nanocomposites. Advanced Materials Research, 1115. pp. 406-409. ISSN 1022-6680

Sabaruddin, Fatimah Atiyah and Samat, Noorasikin and Abang Ismawi, Dayang Habibah (2014) The effects of coupling agent on the flame retardant properties of PP/ATH nanocomposites. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Sahari, J. and Maleque, Md. Abdul (2016) Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016. pp. 1-7. ISSN 1687-9422 E-ISSN 1687-9430

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Sahari, J. and Sapuan, S. M. and Maleque, Md. Abdul and Zainudin, E.S. (2013) Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49. pp. 285-289. ISSN 0261-3069

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy, 6 (6). pp. 1-5. ISSN 1556-6560

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2013) Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701. pp. 225-228. ISSN 1022-6680

Sahari, J. and Sapuan, S. M. and Zainudin, E.S. and Maleque, Md. Abdul (2012) A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry, 4. pp. 254-259. ISSN 1876-6196

Sahari, J. and Sapuan, S.M. and Zainudin, E.S. and Maleque, Md. Abdul (2014) Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry, 26 (4). pp. 955-959. ISSN 0970-7077 (P) 0975-427X (O)

Sahari, J. and Sapuan, S. M. and Zainudin, E. S. and Maleque, Md. Abdul (2014) Degradation characteristics of SPF/SPS biocomposites. Fibres & Textiles in Eastern Europe, 22 (5(107)). pp. 94-96. ISSN 1995-2014

Sahari, J. and Maleque, Md. Abdul (2015) Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology, 9 (19). pp. 176-181. ISSN 1995-0756

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Samat, Noorasikin and Ahmad, Zuraida and Halim, Zahurin and Anuar, Hazleen and Sabaruddin, Fatimah Atiyah (2012) Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012), 29 May – 01 June 2012, Pahang. (Unpublished)

Samat, Noorasikin and Burford, Robert and Whittle, Alan and Hoffman, Mark (2009) The effects of frequency on fatigue threshold and crack propagation rate in modified and unmodified polyvinyl chloride. Polymer Engineering and Science, 49 (7). 1299 -1310. ISSN 1548-2634

Samat, Noorasikin and Burford, Robert and Whittle, Alan and Hoffman, Mark (2010) The effects of water and frequency on fatigue crack growth rate in modified and unmodified Polyvinyl Chloride. Polymer Engineering and Science, 50 (2). pp. 352-364. ISSN 1548-2634

Samat, Noorasikin and Kemal, Indra and Burford, Robert and Whittle, Alan and Hoffman, Mark (2008) Fatigue behaviour of PVC nanocomposites. In: ARNAM Annual Workshop, 15 - 18 December 2008, Deakin University, Victoria. (Unpublished)

Samat, Noorasikin and Lazim, Nurul Hakimah and Motsidi, Siti Nor Rasyidah and Hassan, Noor Azlina (2017) Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. Materials Science Forum, 894 (4). pp. 62-65. ISSN 1662-9752

Samat, Noorasikin and Marini, Che Dini and Maritho, Muna Athirah and Sabaruddin, Fatimah Atiyah (2012) Tensile and impact properties of polypropylene/microcrystalline cellulose treated with different coupling agents. In: 8th Asian-Australian Association Conference on Composite Materials, 6-8 November 2012, Kuala Lumpur. (Unpublished)

Samat, Noorasikin and Mohd Lazim, Nurul Hakimah and Motsidi, Siti Nor Rasyidah and Hassan, Noor Azlina (2016) Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Frontiers of Composite Materials 2016, 19th-21st Nov. 2016, Auckland, New Zeland. (Unpublished)

Samat, Noorasikin and Mohmed Nasir, Muhamad Faris Farhan and Marzuki, Zubaidah and Md Akil, Hazizan (2021) Mechanical performance of composites materials prepared from waste plastics and tubed tyre. Journal of Sustainability Science and Management, 16 (8). pp. 229-239. ISSN 1823-8556 E-ISSN 2672-7226 (In Press)

Samat, Noorasikin and Mokhtar, Wan Nur Athirah and Zulkifli, Nur Izzati (2014) Properties of eco-friendly composite from recycled polypropylene. In: International Conference on Plastics, Rubber and Composites (ICPRC 2014), 20th-21st June 2014, Pulau Langkawi, Malaysia. (Unpublished)

Samat, Noorasikin and Motsidi, Siti Nor Rasyidah and Lazim, Nurul Hakimah (2018) Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Samat, Noorasikin and Motsidi, Siti Nor Rasyidah and Mohd Lazim, Nurul Hakimah (2018) Effects of electron beam radiation dose on the compatibilization behaviour in recycled polypropylene/microcrystalline cellulose composites. IOP Conference Series: Materials Science and Engineering, 290. pp. 1-6. ISSN 1757-8981 E-ISSN 1757-899X

Samat, Noorasikin and Nasrudin, Raimi Fariz and Engliman, Nurul Sakinah (2022) Synthesis of Poly(vinyl) alcohol-cellulose nanocrystal hybrid aerogel. In: 2022 Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022), 8-9 April 2022, Coimbatore, Tamil Nadu, India (Online). (Unpublished)

Samat, Noorasikin and Sarifuddin, Norshahida and Shafiee, Muhd Izzudin (2020) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. Test Engineering and Management, 83. pp. 25906-259009. ISSN 0193-4120

Samat, Noorasikin and Sulaiman, Muhammad Afnan and Ahmad, Zuraida and Anuar, Hazleen (2021) A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering, 24 (2). pp. 223-231. ISSN 2708-9975

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2007) Fatigue crack growth in unplasticized polyvinyl chloride (u-PVC) and modified polyvinyl chloride (PVC-M)at different frequencies. In: ARNAM 2007 Annual Workshop, 8-11 July, 2007, Australian National University, Kiola Canberra. (Unpublished)

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (1998) The frequency effects on fatigue threshold of PVC-M and PVC-U in air and water medium. Advanced Materials Research, 41-42. pp. 183-187. ISSN 1662-8985

Samat, Noorasikin and Zulkapli, Nor Najihah and Halim, Zahurin and Ahmad, Zuraida and Abang Ismawi Hassim, Dayang Habibah (2015) Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research, 1115. pp. 402-405. ISSN 1022-6680

Samat, Noorasikin and Zulkifli, Nur Izzati and Anuar, Hazleen (2013) Mechanical properties of recycled PP reinforced with microcrystalline cellulose: effect of MAPP content. In: 9th International Conference on Composite Science and Technology (ICCST/9), 24-26 April 2013, Sorrento, Naples Italy.

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2008) Fatigue crack propagation of PVC-U and PVC-M pipes in a water environment. In: 5th International Conference on Polymers, Composites and Adhesives, 7 - 11 September 2008, Les Diablerets, Switzerland. (Unpublished)

Sapuan, S.M. and Harimi, M. and Maleque, Md. Abdul (2003) Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering, 28 (2B). pp. 171-181. ISSN 1319-8025

Serati, Flora and Mohd Zaki, Syazwani and Zulkifli, Ahmad Akid (2023) Strategies for improving photothermal conversion capabilities in hydrogel polymer materials for solar vapor generation. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

Shaharuddin, Mohd Izwan and Mohd Salit, Sapuan and Mohamed Yusoff, Mohd. Zuhri and Abd Rahman, Mohamed (2021) Thermal stability and dynamic mechanical analysis of Benzoylation treated sugar palm/kenaf fiber reinforced polypropylene hybrid composites. Polymers, 13 (17). ISSN 2073-4360

Shakri, Adibah and Ikmal Shawaludin, Muhammad Ayman and Mohamed Suffian, Izzat Fahimuddin and Farikhah, Irna and Mohd Pa'ad, Khairunnisa (2023) Poly lactic-co-glycolic acid nanoparticles: flow rates and gauge sizes influence the droplet surface tension and particle sizing. Journal of Research in Nanoscience and Nanotechnology, 9 (1). pp. 1-12. ISSN 2773-6180

Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.

Sulaiman, Nur Syahirah and Hamzah, Nurasyikin and Zakaria, Siti Fatimah and Che Othman, Siti Fairuz and Mohamed Suffian, Izzat Fahimuddin (2021) Hydrogel-nanoparticle hybrids for biomedical applications: principles and advantages. Nanomedicine, 16 (2). pp. 81-84. ISSN 1743-5889 E-ISSN 1748-6963

Syed Putra, Sharifah Shahira and Jimat, Dzun Noraini and Wan Nawawi, Wan Mohd Fazli and Sulaiman, Sarina and Jamal, Parveen and Ahmad Nor, Yusilawati (2018) Surface functionalisation of Microfibrillated Cellulose (MFC) of cocoa pod husk with Ƴ-Methacryloxypropyltrimethoxysilane (MPS). In: The 3rd International Conference on Green Chemical Engineering and Technology (GCET 2017), 7th-8th Nov. 2017, Swiss-Garden Hotel Melaka.

Syed Shaharuddin, Sharifah Imihezri and Adnan, Muhammad Danial Afiq and Muhamad Khairussaleh, Nor Khairusshima and Mohd Shaffiar, Norhashimah and Buys, Yose Fachmi (2018) Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Syifa, Zainab and Wan Nawawi, Wan Mohd Fazli (2018) Biodegradable mushroom-based transparent paper. International Journal For Technological Research In Engineering (Special Issue). pp. 14-18. E-ISSN 2347-4718

T

Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9

Tuan Rohadi, Tuan Nurain and Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis (2020) Isolation and characterisation of cellulose from cortex, pith and whole of the Pennisetum purpureum: Effect of sodium hydroxide concentration. Journal of Materials Research and Technology, 9 (6 (Nov-Dec)). pp. 15057-15071. ISSN 238-7854/

V

Viannie, Leema Rose and Banapurmath, N.R. and Soudagar, Manzoore Elahi M. and Nandi, Anilkumar V. and Hossain, Nazia and Shellikeri, Ashwini and Kaulgud, Vinita and Mujtaba, MA and Khan, Sher Afghan and Asif, Mohammad (2021) Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets. Journal of Environmental Chemical Engineering, 9 (6). pp. 1-8. ISSN 2213-3437

W

Wan Muhamad, Wan Naimatul Asiah and Othman, Rashidi and Shaharuddin, Ruhul Izzati and Hasni, Mohd Shah Irani (2015) Microorganism as plastic biodegradation agent towards sustainable environment. Advances in Environmental Biology, 9 (13). pp. 8-13. ISSN 1995-0756 E-ISSN 1998-1066

Wan Nawawi, Wan Mohd Fazli and Jones, Mitchell and Murphy, Richard J and Lee, Koon-Yang and Kontturi, Eero and Bismarck, Alexander (2020) Nanomaterials derived from fungal sources - Is It the new hype? Biomacromolecules, 21 (1). pp. 30-55. ISSN 1525-7797 E-ISSN 1526-4602

Wan Nawawi, Wan Mohd Fazli and P. Jones, Mitchell and Kontturi, Eero and Mautner, Andreas and Bismarck, Alexander (2020) Plastic to elastic: fungi-derived composite nanopapers with tunable tensile properties. Composites Science and Technology, 198. ISSN 02663538

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. Journal of Advanced Research in Materials Science, 50 (1). pp. 14-18. ISSN 2289-7992

Wan Osmani, Sharifah Nur Aqilah and Ali, Fathilah and Adli, Sarah Amalina (2018) Effect of acid hydrolysis treated pineapple fiber in plasticized polylactic acid composite. In: 5th International Conference on Biotechnology Engineering (ICBioE 2018), 19th-20th September 2018, Kuala Lumpur.

Whittle, Alan and Samat, Noorasikin and Hoffman, Mark and Burford, Robert (2008) Fatigue crack propagation of PVC-U and PVC-M in water environment. In: Plastic Pipes XIV Conference, 22 - 24 September 2008, Budapest, Hungary. (Unpublished)

Y

Yusof, N.S.B. and Sapuan, S.M. and Sultan, M.T.H. and Jawaid, M. and Maleque, Md. Abdul (2017) Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)). pp. 129-144. ISSN 0870-8312

Z

Zamli, Mohamad Izzuddin and Ahmad, Farah and Mohd Hatta, Maziati Akmal (2021) Extraction of microbial chitosan for piezoelectric application. In: First International Conference on Electrical Energy and Power Engineering 2020 (ICEEPE 2020), 27-28 Oct 2020, Penang, Malaysia.

Zulkifli, Ahmad Akid and Sa’adon, Muhammad Hazwan and Serati, Flora and Mohd Zaki, Syazwani (2023) Development of PVA-Chitosan/PANi hydrogels for environmental applications. In: 3rd International Conference on Universal Wellbeing (ICUW) 2022, Online Conference.