Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

-

-, Suryanto (2011) Aluminum spray coating for corrosion resistance of steel. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 192-197. ISBN 9789674181642

-, Suryanto (2011) Cathodic protection of underground pipes. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 210-215. ISBN 9789674181642

-, Suryanto (2011) Corrosion behavior of duplex stainless steel in sea water. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 204-209. ISBN 9789674181642

-, Suryanto (2011) Electrodeposition of alloys. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 198-203. ISBN 9789674181642

-, Suryanto (2011) Electroless nickel based coatings from solution containing sodium hypophosphite. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 186-191. ISBN 9789674181642

A

Adetayo A., Adebisi and Maleque, Md. Abdul (2010) Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress 2010, 2 - 5 August, 2010, Kuching, Sarawak.

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Alkhatib, Ma'an Fahmi Rashid and Alam, Md. Zahangir and Husain, Iman A. F. (2010) Bioremediation of oil spills in soil. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Ani, Mohd Hanafi and Herman, Sukreen Hana and -, Suryanto and Othman, Raihan (2012) Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K. Advanced Materials Research, 576. pp. 429-433. ISSN 1022-6680

Ani, Mohd Hanafi and Othman, Raihan (2012) Formation of protective Cr2O3 scale at high temperature and the effect of mass transport in the presence of water vapor. Advanced Materials Research, 402. pp. 412-420. ISSN 1662-8985

Arshad, Atika and Khan, Sheroz and Zahirul Alam, A. H. M. and Tasnim, Rumana (2016) Non-intrusive monitoring of everyday behavioral activities in an indoor environment. Journal of Electronic Science and Technology, 14 (3). pp. 205-210. ISSN 1674-862X

B

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. (2016) Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

G

Gabbitas, Brian Leslie and Mohamed Ariff, Tasnim Firdaus and Cao, Peng (2010) Synthesis of pewter alloy from tin–copper–antimony powder mixtures by microwave and conventional sintering. Journal of Powder Metallurgy. ISSN 1743-2901 (O), 0032-5899 (P)

H

H. M. S, Amir and Nahar K., Nurun and Iqba, Nida and F. R, Nur and Lee, L. H. and Firdhaus Mad Nordin, Mariam and M. S, Sharifudin and W. A K, Wan Rashidah and A. A. Mukred, Jameel and Zulkifli, Razauden Mohamed Ohamed and Zakaria, Mona Yap @ Mona (2016) Effect of heat treatment on the antioxidant activities of two cultivars of sweet potatoes. Jurnal Teknologi (Sciences and Engineering), 78 (6). pp. 111-115. ISSN 0127-9696 E-ISSN 2180-3722

Hassan, Noor Azlina and Hassan, Norita and Ahmad, Sahrim and Rasid, Rozaidi (2011) Comparison of mechanical properties between untreated and sulphuric acid treated short carbon fiber reinforced Thermoplastic Natural Rubber (TPNR) composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 64-68. ISBN 9789674181673

I

Ismail, Izham Izzat and Nordin, Norhuda Hidayah and Azami, Muhammad Hanafi and Abdullah, Nur Azam (2022) Metals and alloys additives as enhancer for rocket propulsion: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (2). ISSN 2289-7879

J

Jamal, Nur Ayuni Jamal and Yusof, Farazila and Ahmad Nor, Yusilawati and Othman, Maizatulnisa and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) The role of tin and magnesium in assisting liquid phase sintering of aluminum (Al). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

K

Kaderi, Akbar and Ani, Mohd Hanafi and Herman, Sukreen Hana and Othman, Raihan (2012) Studies on initial stage of high temperature oxidation of Fe - 9 to 12% Cr alloys in water vapour environment. Advanced Materials Research, 557. pp. 100-107. ISSN 1022-6680

Kaderi, Akbar and Meskon, Shahrul Razi and Ani, Mohd Hanafi and Othman, Raihan (2012) Initial stage oxidation of cr in dry and wet environment at 1073 K and the significant differences of FT – IR spectra produced thereof. Advanced Materials Research , 576 (2012). pp. 619-622. ISSN 1022-6680

Kaderi, Akbar and Mohd Zainal, Ahmad Zaki and Ani, Mohd Hanafi and Othman, Raihan (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. IIUM Engineering Journal, 12 (5). pp. 69-78. ISSN 1511-788X

M

Maleque, Md. Abdul (2016) Erosion corrosion and tribological behavior of TIG torch composite layers. Project Report. Research Management Centre, International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2015) Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry, 51 (6). pp. 523-529. ISSN 1068-3755

Maleque, Md. Abdul (2011) Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and , W. Saffina and Ahmed, A. S and Ali, M. Y. (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Maleque, Md. Abdul and Karim, Md. Rezaul and Yassin, N. (2011) Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research, 264-65. pp. 278-283. ISSN 1022-6680

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials, 24 - 26 February, 2010, Dhaka.

Maleque, Md. Abdul and Sarker, Dyuti (2010) The development of an optimum material selection process for the design of automative brake rotor. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010), 15th-17th June 2010, Kuala Lumpur Convention Centre, Kuala Lumpur.

Md Idriss, Ahmed Nazrin and UNSPECIFIED and Maleque, Md. Abdul (2022) Demographic changes by the vickers microhardness surface indentations on the TiC metal matrix composite TIG melted track. In: 3rd Malaysian International Tribology Conference, 28-30 September 2020, Virtual.

Mohamad, Souad A. (2011) Electrodeposition technique for ZnO semiconductor thin film fabrication. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 181-185. ISBN 9789674181642

Mohamad, Souad A. and Arof, Abdul Kariem (2011) A study on double junction zinc based/polymer thin film solar cell. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 170-175. ISBN 9789674181642

Mohamad, Souad A. and Arof, Abdul Kariem (2011) A voltammetric study of zinc telluride thin films prepared for photovoltaic applications. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 176-180. ISBN 9789674181642

Mridha, Shahjahan (2011) Composite coating on titanium alloy using high power laser. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 45-49. ISBN 9789674181673

Mridha, Shahjahan and Md Idriss, Ahmed Nazrin and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Baker, T. Neville (2015) Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11). pp. 1362-1369. ISSN 0267-0836

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Mridha, Shahjahan and Shiau, Khee Tang (2011) Measurement of moisture absorption in Borophosphosilicate Glass (BPGS) films. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 50-57. ISBN 9789674181673

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2019) The potential influence of building optimization and passive design strategies on natural ventilation systems in underground buildings: The state of the art. Tunnelling and Underground Space Technology, 92. pp. 1-18. ISSN 0886-7798

Musa, Muktaruddin and Ani, Mohd Hanafi and Othman, Raihan (2013) Natural corrosion inhibitor for corrosion protection of metal artefact: an overview. Advanced Materials Research, 701. pp. 323-328. ISSN 1022-6680

N

Nordin, Norhuda Hidayah and Leong, Zhaoyuan and Goodall, Russel and Todd, Iain (2022) Theoretical critical metastability temperature to interpret phase formation in a lamellar-like- structured high entropy alloy. Journal of Materials Research and Technology, 18. pp. 2519-2530. ISSN 2238-7854 E-ISSN 2214-0697

O

Omar, Mohd Afian and Hassan, Norita (2016) Development of thermoplastic natural rubber (TPNR) as a new binder in metal injection moulding. Journal of Engineering Science, 12. pp. 43-51. ISSN 1823-3430

P

P.H., Lailatul and Maleque, Md. Abdul (2016) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8th-11th Nov 2016, Kuala Lumpur. (Unpublished)

Purwanto, Hadi and Rozhan, Alya Naili and Mohamad, A. S. and Zakiyuddin, Ahmad (2018) Characteristics of iron ore sinter with EFB addition. In: International Conference on Innovative Technology, Engineering and Sciences 2018, iCITES 2018, 1 -2 March 2018, Universiti Malaysia Pahang (UMP) Pekan Campus LibraryPekan, Pahang; Malaysia.

Purwanto, Hadi and Rozhan, Alya Naili and Zakiyuddin, Ahmad and Mohamad, A. S. (2018) Effect of temperature on porosity of iron ore sinter with biochar derived from EFB. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8-9 August 2017, Faculty of Engineering, International Islamic University Malaysia (IIUM) Kuala Lumpur.

S

Syed, Zubair Imam and Liew, Mohdshahir and Hasan, Muhammad Hasibul and Venkatesan, Srikanth (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 1660-9336

Y

Yaacob, Iskandar Idris (2011) Mechanochemical synthesis of CeO2 nanopowder using platenary ball mining. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 163-169. ISBN 9789674181642