IIUM Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA630 Structural engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Number of items at this level: 73.

Article

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2019) Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2). pp. 211-221. ISSN 1511-788X E-ISSN 2289-7860

Abdul Muthalif, Asan Gani and Langley, Robin S (2012) Active control of high-frequency vibration: optimisation using the hybrid modelling method. Journal of Sound and Vibration, 331 (13). pp. 2969-2983. ISSN 0022-460X

Abdullah, Nur Azam (2021) Segerakan penggantian Hawk tingkat keupayaan aset TUDM. Berita Harian, 29 November 2021. p. 12.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115. pp. 517-522. ISSN 1022-6680

Adedi, Muhammad Rahman and Syed Mohamed Ali, Jaffar and Hrairi, Meftah (2019) A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 749-753. ISSN 2249 – 8958

Ahamd Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim (2016) Effect of thread material and stitch orientation on tensile mechanical property of stitched oil palm empty fruit bunch fiber reinforced epoxy composites. Journal of Built Environment, Technology and Engineering, 1. pp. 282-288. ISSN 0128-1003

Ahmed, Zaheer and Syed Mohamed Ali, Jaffar and Rafeeq, Mohammed and Hrairi, Meftah (2019) Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1139-1148. ISSN 2278-3075

Ali, Maisarah and Tsuchiya, Itsuo and Matsui, Shigayuki (1999) Effect of fatigue loading on bonding shear strength at the interface between two layers concrete. Journal of Structural Engineering, 45A. 1157--1164. ISSN 0733-9445

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Civil structural health monitoring and machine learning: a comprehensive review. Frattura ed Integrita Strutturale, 18 (69). pp. 43-59. E-ISSN 1971-8993

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Damage detection in concrete structures with impedance data and machine learning. Bulletin of the Polish Academy of Sciences: Technical Sciences, 72 (3). pp. 1-11. ISSN 0239-7528 E-ISSN 2300-1917

Anjum, Asraar and Syed Mohamed Ali, Jaffar and Mohamed Zayan, Jalal and Aabid, Abdul (2020) Statistical Analysis of Adhesive Bond Parameters in a Single Lap Joint System. Journal of Modern Mechanical Engineering and Technology, 7. pp. 53-58. E-ISSN 2409-9848

Che Deraman, Siti Noratikah and Abo Sabah, Saddam Hussein and Zaini, Shaharudin Shah and A. Majid, Taksiah and Al-Fakih, Amin (2020) The effects of the presence of a kitchen house on the wind flow surrounding a low-rise building. Energies, 13 (23). pp. 1-20. ISSN 1996-1073

Eusuf, Muhammad Abu and Abdur Rashid, Khairuddin and Mohd. Noor, Wira and Al Hasan, Abdullah (2013) Shear wall construction in buildings: a conceptual framework on the aspect of analysis and design. Applied Mechanics and Materials, 268-27. pp. 706-711. ISSN 1660-9336

Eusuf, Muhammad Abu and Al Hasan, Abdullah (2013) Influential factors and structural reliability. Applied Mechanics and Materials, 268-27. pp. 677-683. ISSN 1660-9336

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor, Mohd Jailani (2015) Dynamic characterization of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Jailani, Mohd Noor (2015) Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Kashif, Syed Muhammad and Toussaint, Evelyne and Gre´diac, M. and Avril, Ste´phane and Kim, J. H. (2008) Characterization of composite plates using the virtual fields method with optimized loading conditions. Composite Structures, 85 (1). pp. 70-82. ISSN 02638223

Malik, Khurshid and Ahmad, Faiz and Yunus, Nurul Azhani and Gunister, Ebru and Shaik Dawood, Mohd. Sultan Ibrahim and Ali, Saad and Mani, Catherine Sheila and Syahir, Muhammad and Leon Larry, Anselm (2022) The hybridization effects of glass and carbon fibers on the mechanical properties of kenaf mat/epoxy composites. Journal of Natural Fibers, 19 (17). pp. 15432-15447. ISSN 1544-0478 E-ISSN 1544-046X

Mohammed, Mohammed Idris and Sulaeman, Erwin and Musthapa, Faizal (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878 E-ISSN 2249-8958

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Study on tool wear during milling CFRP under dry and chilled air machining. Procedia Engineering, 187. pp. 78-89.

Ndububa, Emmanuel E. and Ijirotimi, I. O and Olowolayemo, Akeem (2022) Concrete characteristics modelling for minimal cost and optimum performance of Abuja housing infrastructures. Open Journal of Engineering Science (OJES), 3 (2). pp. 1-12. ISSN 2734-2115

Nordin, Norhuda Hidayah and Mohamad, Faiz Syazwan and Jamal, Nur Ayuni (2020) Non-isothermal crystallization kinetics of a rapidly solidified as-cast TiZrHfNiCu high entropy bulk metallic glass. World Journal of Engineering and Technology, 8. pp. 280-295. ISSN 2331-4222 E-ISSN 2331-4249

Pakry, Nur Amalina and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2024) Effect of material properties on the behaviour of cross-ply laminated cylindrical shells under thermo-mechanical load. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 51-65. E-ISSN 2289-7895

Salleh, Md Noor and Hakim, Nur Wajihah and Al-Mamun, Abdullah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki (2021) Structural and non-structural ways of managing floods with respect to the climate change situation. Malaysia Water Research Journal, 11 ((1) 2021). pp. 114-121. ISSN 2332-0016

Shaik Dawood, Mohd. Sultan Ibrahim and Iannucci, Lorenzo and Greenhalgh, Emile S. (2008) Three-dimensional static shape control analysis of composite plates using distributed piezoelectric actuators. Smart Materials and Structures, 17 (2). pp. 1-10. ISSN 0964-1726

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Raheman, Md Abdul and Ibrahim, Yasser E. (2024) Enhancing aircraft crack repair efficiency through novel optimization of piezoelectric actuator parameters: a design of experiments and adaptive neuro-fuzzy inference system approach. Heliyon, 10 (11). pp. 1-27. ISSN 2405-8440 E-ISSN 2405-8440

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Suhaimi, Muhammad Nazri and Wahid, Azni Nabela and Nordin, Nor Hidayati Diyana and Md Nor, Khairul Affendy (2022) Optimal piezoelectric shunt damper using enhanced synthetic inductor: simulation and experimental validation. IIUM Engineering Journal, 23 (1). pp. 424-433. ISSN 1511-788X E-ISSN 2289-7860

Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852

Syed Muhammad, Kashif (2012) Delamination effect modeling, simulation and experimental validation of lap shear test. International Journal of Mechanical and Materials Engineering (IJMME), 7 (3). pp. 177-185. ISSN 1823-0334

Syed Muhammad, Kashif and Toussaint, Evelyne and Grédiac, Michel (2009) Optimization of a mechanical test on composite plates with the virtual fields method. Structural and Multidisciplinary Optimization, 38 (1). pp. 71-82. ISSN 1615-1488 (O), 1615-147X (P)

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115. pp. 539-542. ISSN 1022-6680

Topa, Ameen and Shah, Qasim Hussain (2014) Numerical simulations of bulk metal forming process with smooth particle hydrodynamics. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 198-204. ISSN 1991-8178

Book Chapter

Abu Eusuf, Muhammad (2011) A concept of shear wall for the design of high-rise buildings construction. In: Readings in Contemporary Construction Technology and Management. IIUM Press, Kuala Lumpur, pp. 2-15. ISBN 9789674180515

Hossain, Mohammad Sayeed and Maleque, Md. Abdul (2020) Residual stress analysis for sustainable structural integrity assessment of an engineering component. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 548-556. ISBN 978-0-12-813196-1

Hrairi, Meftah and Mohamad, Masturah and Ismail, Siti Maisara (2011) Fatigue damage characterization of aluminum alloy plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 55-62. ISBN 978-967-418-148-2

Hrairi, Meftah and Zuhudi, Nurul Farahana (2011) Corrosion detection in aircraft structures by ultrasonic method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 45-54. ISBN 978-967-418-148-2

Ibrahim, Mohamed S. and Hussain Shah, Qasim (2011) Mode I delamination simulation using LS-DYNA. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 143-149. ISBN 978-967-418-148-2

Md. Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Sustainable seismic design consideration under repeated earthquakes. In: Cradle to Cradle of Environment through Technology; A Sustainability Perspective. LifeVision Resources, Seremban. NS, pp. 396-420.

Sulaeman, Erwin (2011) Experimental geometric stiffness matrix formulation of beam finite element. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 190-201. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Jamaludin, Nur Faizlin and Roslan, Rosfarisya and Abdul Rahman, Mohammad (2011) Buckling of composite columns. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 107-116. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Jamaludin, Nur Faizlin and Roslan, Rosfarisya and Abdul Rahman, Mohammad (2011) Buckling of thin walled sections. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 158-166. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Effect of cutout shape on the critical buckling load of a perforated plate. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 174-181. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Mokhtar, Mohammad Solehan (2011) Propeller blade stress analysis using CATIA. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 30-36. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Shahidan, Zul Hasyimi (2011) Lateral crushing of composite fuselages. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 37-44. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina (2011) Buckling of composite perforated plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 117-124. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Buckling of long column. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 150-157. ISBN 978-967-418-148-2

Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Effect of boundary conditions on the buckling behavior of perforated plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 167-173. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) Characterization of composite materials using full field data. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 131-136. ISBN ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) Finite element model updating. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 240-245. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) Numerical construction of piecewise virtual fields. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 215-220. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) Numerical model of noise effect in full field data. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 221-226. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) Optimized virtual fields with noise minimization. In: Advances in Aircraft Structures. International Islamic University Malaysia Press, Kuala Lumpur, Malaysia, pp. 227-232. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) The constitutive equation gap method. In: Advances in Aircraft Structures. International Islamic University Malaysia Press, Kuala Lumpur, Malaysia, pp. 198-201. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) The equilibrium gap method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 202-205. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) The reciprocity gap method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 206-209. ISBN 978-967-418-148-2

Syed Muhammad, Kashif (2011) The virtual fields method. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, Malaysia, pp. 210-214. ISBN 978-967-418-148-2

Proceeding Paper

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Mohamed Ali, Jaffar Syed and Sulaeman, Erwin (2022) A review of effect of higher order nonlinear theories on analysis of Piezoelectric laminates. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21st - 23rd June 2021, Kuala Lumpur, Malaysia.

Djemana, Mohamed and Hrairi, Meftah (2023) Real-time structural damage detection using EMI under varying load a and temperature conditions. In: 7th International Conference on Technology, Engineering and Science, IConTES 2023, 16-19 November 2023, Antalya/Turkey.

Eusuf, Muhammad Abu and Abdul Rashid, Khairuddin and Ibrahim, Mansor and Mohit, Mohammad Abdul and Salleh, Nurul Hamiruddin and Salleh, Md. Noor (2013) Proposal of a probabilistic reproduction for multi- dimensional assessment of structural behavior and understanding professional ethics: a green technology approach. In: International Conference on Architecture & Built Environment (ICABE2013), 7 - 8 November 2013, Kuala Lumpur & Putrajaya.

Iannucci, L and Shaik Dawood, Mohd. Sultan Ibrahim and Greenhalgh, E and Ariffin, A. K. (2009) Delamination control in composite beams using piezoelectric actuators. In: 17th International Conference on Composite Materials, Edinburgh UK.

L Y, Qiu and Nik Azizan, N Z and Md. Kassim, Tahara Ramadzan (2023) Development of fragility curves for bridge. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14-15 July 2021, Virtual.

Md Kassim, Tahara Ramadzan and A. Majid, Taksiah (2023) Study on earthquake characteristics and method of assembling repeated earthquakes on the 2D seismic design RC frames. In: AWAM International Conference on Civil Engineering, AICCE 2022Penang, 15 - 17 February 2022, Penang.

Md. Kassim, Tahara Ramadzan and A. Majid, Taksiah (2020) Implication of soil-structure interaction on deteriorate existing frames in Penang. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th-5th February 2020, Bangkok, Thailand..

Muhamad Khairussaleh, Nor Khairusshima and Ali Kutty, Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference (AMPT 2016), 8th-11th November 2016, Kuala Lumpur, Malaysia.

Rahman, Muhammad and Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Salleh, Md Noor and Hakim, Nur Wajihah and Al-Mamun, Abdullah and Ayob, Mohd Fairullazi and Sekaran, Thayalam and Ismail, Mohd Azmi and Mat Amin, Mohd Zaki and UNSPECIFIED (2020) Structural and non-structural ways of managing floods with respect to the climate change situation. In: Kolokium Kebangsaan Penyelidikan & Pembangunan Air 2020, 25-26 February 2020, Mini Audi NAHRIM, Seri Kembangan. (Unpublished)

Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Abdur Razzak, M. and Azram, Mohammad and UNSPECIFIED (2013) Study of the effect of different curing setups on mechanical properties of low cost composite structures. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2021) Study on the lateral torsional buckling of composite thin-walled beam. In: BICET, 8th Brunei International Conference Engineering and Technology, 8-10 Nov 2021, Brunei Darussalam.. (Unpublished)

This list was generated on Mon Oct 7 18:57:50 2024 +08.