Items where Subject is "T Technology > T Technology (General) > T351 Mechanical drawing. Engineering graphics"

Abdul Rahman, Muhammad Taqiuddin and Ahmad, Salmiah and Akmeliawati, Rini (2013) Integrated modeling and analysis of an extendable double-link two wheeled mobile robot. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM’13), , July 9-12, 2013, Wollongong, Australia.

A

Abdalla, Mostafa M. and Reddy, Chevva Konda and Faris, Waleed Fekry and Gürdal, Zafer (2005) Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003, 7th-10th April 2003, Norfolk, Virginia.

AbdelRahman, AbdelGawad Tamer and Nordin, Nor Hidayati Diyana and Toha, Siti Fauziah and Idris, Ahmad Syahrin (2022) Real-time wearable device for predicting a long covid patient's condition. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 09-10 August 2022, Kuala Lumpur.

Abdul Aziz, Mohammad and Rashid, Muhammad Mahbubur and Roy, Rupal and ., Arifuzzaman (2019) Design and performance test of a compressed air operated reciprocating machine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 210-215. E-ISSN 2277-3878

Abdullah, Nur Azam (2021) UAV in defence: future outlook for Malaysia. In: Aerospace Research Interest Laboratory(ARIEL) Seminar Series, 10 Mar 2021, Online. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Abdullah, Nur Azam and Sulaeman, Erwin and Ahmad, Meor Iqram Meor (2022) LCO flutter instability on oscillating supersonic wing by means of linearized aerodynamic small disturbance theory. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (2). Springer Nature Switzerland AG, Switzerland, pp. 13-28. ISBN 978-3-030-85645-8

Abdullah, Nur Azam and Yusoff, Mohammad Daniel and Shahimi, Sharis-Shazzali and Meor Ahmad, Meor iqram (2021) Computational modelling of bird strike impact on an aluminium alloy plate via coupling of FE-SPH. In: The 5th Symposium on Damage Mechanism in Materials and Structures (SDMMS 20·21), 08-09 Mar 2021, Online.

Ahmad, Meor Iqram Meor and Sabri, Mohd Anas Mohd and Tahir, Mohd Faizal Mat and Abdullah, Nur Azam (2022) Predictive modelling of creep crack initiation and growth using Extended Finite Element Method (XFEM). Frattura ed Integrità Strutturale, 16 (61). pp. 119-129. ISSN 1971-8993 (In Press)

Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and Yusoff, Mohd Zamri (2015) Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators. Applied Thermal Engineering, 91. pp. 191-201. ISSN 1359-4311

Albarody, Thar M. Badri and Al-Kayiem, Hussain H. and Faris, Waleed Fekry (2016) The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1). pp. 77-87. ISSN 1738-494X E-ISSN 1976-3824

Altalmas, Tareq, M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im and Aula, Abqori (2013) Mechanical design and simulation of wwo-Wheeled wheelchair using solidworks. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (In Press)

Ariff, Tasnim Firdaus and Jalil, Muhammad Ezurin and Bahar, Rubina (2014) Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 59-65. ISBN 978-969-9952-07-4

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.

Aula, Abqori and Altalmas, Tareq M. and Ahmad, Salmiah and Akmeliawati, Rini and Sidek, Shahrul Na'im (2013) Integrated design, modelling and analysis of two-wheeled wheelchair for disabled. In: 16th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR’13), 14 – 17 July 2013, Sydney, Australia.

F

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry and Abdel-Rahman, Eihab M. and Nayfeh, Ali H. (2002) Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 22nd-25th April 2002, Denver, Colorado.

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-1471 E-ISSN 1479-148X

H

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Jailani, Mohd Noor (2015) Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Hanouf, Zahir and Faris, Waleed Fekry and Nor, Mohd Jailani Mohd (2014) Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1662-7482

I

Isharuddin, Siti Sarah and Okasha, Mohamed and Ibrahim, Sultan (2015) IIUM cubeSat structural subsystem design. Advanced Materials Research, 1115. pp. 568-572. ISSN 1662-8985

Islam, Md Rafiqul and Rahman, Muhammad Mahbubur and Rahman, Mohammed Ataur and Mohamad, Muslim Har Sani and Embong, Abd Halim (2021) Cryptocurrency integration challenges in blockchain for financial institution. Asian Journal of Electrical and Electronic Engineering, 1 (2). pp. 28-36. E-ISSN 2785-8189

L

Loh, S. K. and Faris, Waleed Fekry and Hamdi, M. and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 E-ISSN 1869-1900

M

Mamat, Ahmad Fadhli and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Rabe, Noor Suzilawati and Muda, Rahsidi Sabri and Md Amin, Mohamad Faiq (2020) Utilization of unmanned aerial vehicle (UAV) in dam disaster management: evacuation planning. International Journal of Technology Management and Information System, 2 (4). pp. 51-62. E-ISSN 2710-6268

R

Rafeeq, Mohammed and Toha, Siti Fauziah and Ahmad, Salmiah and Mohd Razib, Mohd Asyraf and Idris, Ahmad Syahrin and Tokhi, Mohammad Osman (2024) Amphibious robots locomotion strategies in unstructured complex environments: a review. PLATFORM - a journal of Engineering, 8 (1). pp. 12-22. ISSN 2600-8424 E-ISSN 2636-9877

Rashid, Muhammad Mahbubur and Ahamed, Raju (2022) Instrumentation in Underwater Environment. In: Control Engineering in Robotics and Industrial Automation. Studies in Systems, Decision and Control, 371 . Springer, Cham, pp. 239-256. ISBN 978-3-030-74539-4

Ridhuan Siradj , Fadly Jashi Darsivan and Wahyudi, Martono and Faris, Waleed Fekry and Ata, A.A (2007) Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07), 26th-29th March 2007, Sharjah, U.A.E. (Unpublished)

S

Shahruddin, Najlah Sakinah and Mustaffa, Nur Haifa Syazwina and Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda (2021) An experimental study of tool wear during end milling of carbon fibre reinforced polymer in cutting fluid condition. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, UniMAP , Perlis.

V

Van Lissa, Caspar J and Stroebe, Wolfgang and vanDellen, Michelle R and Leander, N Pontus and Agostini, Maximilian and Draws, Tim and Grygoryshyn, Andrii and Gutzkow, Ben and Kreienkamp, Jannis and Vetter, Clara S. and Abakoumkin, Georgios and Abdul Khaiyom, Jamilah Hanum and Ahmedi, Vjollca and Akkas, Handan and Almenara, Carlos A and Atta, Mohsin and Bagci, Sabahat Cigdem and Basel, Sima and Kida, Edona Berisha and Bernado, Allan B. I. and Buttrick, Nicholas R and Chobthamkit, Phatthanakit and Choi, Hoon-Seok and Cristea, Mioara and Csaba, Sara and Damnjanović, Kaja and Danyliuk, Ivan and Dash, Arobindu and Di Santo, Daniela and Douglas, Karen M and Enea, Violeta and Faller, Daiane and Fitzsimons, Gavan J and Gheorghiu, Alexandra and Gómez, Ángel and Hamaidia, Ali and Han, Qing and Helmy, Mai and Hudiyana, Joevarian and Jeronimus, Bertus F and Jiang, Ding-Yu and Jovanović, Veljko and Kamenov, Zeljka and Kende, Anna and Keng, Shian-Ling and Tra, Thi Thanh Kieu and Koc, Yasin and Kovyazina, Kamila and Kozytska, Inna and Krause, Joshua and Kruglanski, Arie W and Kurapov, Anton and Kutlaca, Maja and Lantos, Nóra Anna and Lemay Jr., Edward P and Lesmana, Cokorda Bagus J and Louis, Winnifred R and Lueders, Adrian and Iqbal Malik, Najma and Martinez, Anton P and McCabe, Kira O and Mehulić, Jasmina and Milla, Mirra Noor and Mohammed, Idris and Molinario, Erica and Moyano, Manuel and Muhammad, Hayat and Mula, Silvana and Muluk, Hamdi and Myroniuk, Solomiia and Najafi, Reza and Nisa, Claudia F and Nyúl, Boglárka and O'Keefe, Paul A and Osuna, Jose Javier Olivas and Osin, Evgeny N and Park, Joonha and Pica, Gennaro and Pierro, Antonio and Rees, Jonas H and Reitsema, Anne Margit and Resta, Elena and Rullo, Marika and Ryan, Michelle K and Samekin, Adil and Santilla, Pekka and Sasin, Edyta and Schumpe, Birga M and Selim, Heyla A and Stanton, Michael Vicente and Sultana, Samiah and Sutton, Robbie M and Tseliou, Eleftheria and Utsugi, Akira and van Breen, Jolien A and Van Veen, Kees and Vázquez, Alexandra and Wollast, Robin and Yeung, Victoria Wai-lan and Zand, Somayeh and Žeželj, Iris Lav and Zheng, Bang and Zick, Andreas and Zúñiga, Claudia and Belanger, Jocelyn J and UNSPECIFIED (2022) .Using machine learning to identify important predictors of COVID-19 infection prevention behaviors during the early phase of the pandemic. Patterns.

W

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2011) Application of rapid prototyping in medical engineering. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2011), 5-6 December 2011, Kangar, Perlis, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.