IIUM Repository

Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: | . | A | B | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 279.

, Afzeri and M. S., Shahdan and Hussain Shah, Qasim (2011) Effect of addendum parameters to the formability of aluminum AL 6303. Advanced Materials Research, 264. pp. 206-211. ISSN 1022-6680

, Pramusanto and Purwanto, Hadi and Dahlan, Yuhelda and Saleh, Nuryadi (2011) Phase formation during reduction of iron sand with soda ash flux addition. Advanced Materials Research, 264-5. pp. 801-806. ISSN 1662-8985

Al-Bat’hi, Souad (2011) Semiconductor/Polymer/Semiconductor double junction thin film for photovoltaic application. In: International Renewable Energy and Environment Conference (IREEC), June 24 – 26, 2011, Kuala Lumpur Malaysia.

.

., Ahmad Fadli and Sopyan, Iis (2011) The influence of hydroxyapatite loading on protein foaming-consolidation porous alumina sintered at 1300°C. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 120-125. ISBN 9789674181673

A

A. Mohamad Al-Batt’hi, Souad and Ahmad , Zuraida (2011) Integrating Tawhidi values into science and engineering education: a case study. In: International Conference on Islamization in Modern Science and Scientification of Islamic Studies: Prospects and Bridges, 7-8 December 2011, Kuantan Pahang Malaysia. (Unpublished)

A.K.M, Asif Iqbal and Khan, Ahsan Ali (2011) Optimization of process parameters on EDM milling of stainless steel AISI 304. Advanced Materials Research, 264-65. pp. 979-984. ISSN 1022-6680

A.N., Mustafizul Karim and Saad, Mohd Fadli and Mahbubul, Haque (2011) Development of a prospective web-based inventory system for management of lab facilities. Journal of Emerging Trends in Engineering and Applied Sciences, 2 (1). pp. 36-42. ISSN 2141-7016

Abd Halim, Nor Farah Huda and , Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. Advanced Materials Research, 311. pp. 240-243. ISSN 1662-8985

Abd Halim, Nor Farah Huda and -, Afzeri and Aminanda, Yulfian (2011) Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates. In: 2011 International Conference on Advanced Design and Manufacturing Engineering, (ADME 2011), 16th-18th Sept. 2011, Guangzhou, China.

Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2011) Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research, 265. pp. 760-764. ISSN 1662-8985

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1662-8985

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on recast layers and micro crack in EDM of titanium. Advanced Materials Research, 264-65. pp. 1180-1186. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Effect of machining parameters on surface roughness during wet and dry Wire-EDM of stainless steel. Journal of Applied Sciences. pp. 1-5. ISSN 1812-5662 (O), 1812-5654 (P)

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining. Advanced Materials Research, 264/5. pp. 831-836. ISSN 1022-6680

Abdur-Rasheed, Alao and Konneh, Mohamed (2011) Optimization of precision grinding parameters of silicon for surface roughness based on taguchi method. Advanced Materials Research, 264 . pp. 997-1002. ISSN 1022-6680

Abu Zarim, Faizal and Alaei, Iraj and Yaacob, Iskandar Idris (2011) Fabrication of nickel aluminide (Ni3Al) by hot isostatic pressing (HIP). In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 13-16. ISBN 9789674182311

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, Malaysia.

Adebisi, Adetayo A. and Maleque, Md. Abdul (2011) Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction, 6 (2). pp. 161-168. ISSN 1823-6379

Adebisi, Adetayo A. and Maleque, Md. Abdul and Rahman, M. M. (2011) Metal matrix composite brake rotor: Historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4. pp. 471-480. ISSN 1985-9385 (P) 2180-1606(O)

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi.

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3). pp. 356-361. ISSN 1823-0334

Adesta, Erry Yulian Triblas (2011) Manufacturing management: from basic machining to quality product. IIUM Press, Kuala Lumpur. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Machining Time Simulation in High Speed Hard Turning. Advanced Materials Research , 264-5. pp. 1102-1106. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Tool life in high speed turning with negative rake angle. Advanced Materials Research, 264. pp. 1009-1014. ISSN 1662-8985

Afzeri, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2011) Virtual simulation and remote desktop interface for CNC milling operation. Advanced Materials Research, 264/65. pp. 1643-1647. ISSN 1662-8985

Ahmad, Fadli and Sopyan, Iis and Mel, Maizirwan and Ahmad, Zuraida (2011) Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical properties. Asia-Pacific Journal of Chemical Engineering, 6. pp. 863-869. ISSN 1932-2143

Ahmad, Zuraida (2011) Integrating and infusing of Islamic values in the existing engineering course subject: A case study. In: The 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11), 17 -19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)

Ahmad, Zuraida and Anuar, Hazleen (2011) Properties of compression moulding starch - nanoclay biocomposites. In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19) , 27-30 July 2011, Shanghai, China. (Unpublished)

Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Abang Haji Abdul Majid, Dayang Laila and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72. pp. 928-932. ISSN 1013-9826

Ahmad, Zuraida and Anuar, Hazleen and Yusof, Yusliza (2011) The study of biodegradable thermoplastics sago starch. Key Engineering Materials, 471. pp. 397-402. ISSN 1013-9826

Ahmad, Zuraida and H, Anuar (2011) Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering, 8 (Supp.1). pp. 1377-1378. ISSN 1708-5284 (Unpublished)

Ahmad, Zuraida and Ismail, Ahmad Faris and Shafie, Amir Akramin and Ihsan, Sany Izan and Halim, Zahurin and Mohamad, Souad A. (2011) Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, 1 (3). pp. 131-137. ISSN 2229-9947

Ahmad, Zuraida and Purwanto, Hadi and Sarifuddin, Norshahida and R. F. , Faezah and Y. , Farrah (2011) Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Ahmad, Zuraida and Sarifuddin, Nurshahida and Iis, Sopyan and Halim, Zahurin (2011) Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1). pp. 63-75. ISSN 1511-788X

Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and Razali, Muhammad Khairul Muhaimin (2011) The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17 -19 May 2011, Kuala Lumpur, Malaysia. (In Press)

Ahmad, Zuraida and Yusof, Yusliza and Halim, Zahurin and Md. Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials, 471-72. pp. 403-408. ISSN 1013-9826

Akhbar, Kaderi and Ani, Mohd Hanafi and Othman, Raihan and Mohd Zainal, Ahmad Zaki (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7th June 2011, Perbadanan Putrajaya Complex, Putrajaya. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis. Advanced Materials Research , 264-5. pp. 1097-1101. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) New approach in cost structuring of high speed hard turning. Advanced Materials Research, 264-26. pp. 1003-1008. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)

Alam, S. and Amin, A. K. M. Nurul and Konneh, Mohamed and Patwari, Anayet U. (2011) Surface roughness prediction in high speed flat end milling of Ti-6Al-4V and optimization by desirability function of RSM. Advanced Materials Research, 264-26. pp. 1166-1173. ISSN 1022-6680

Alao, Abdul-Raheed and Konneh, Mohamed (2011) Application of taguchi and box-behnken designs for surface roughness in precision grinding of silicon. International Journal of Precision Technology, 2 (1). pp. 21-38. ISSN 1755-2079 (O), 1755-2060 (P)

Alao, Abdur-Rasheed and Konneh, Mohamed (2011) An experimental study on precision grinding of silicon using diamond grinding pins. International Journal Materials Engineering Innovation (IJMATEI), 2 (3-4). pp. 325-345. ISSN 1757-2754 E-ISSN 1757-2762

Ali, Mohammad Yeakub (2011) Application of focused ion beam for machining of nanopillar sheet. Research Report. s.n. (Unpublished)

Ali, Mohammad Yeakub (2011) Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available). In: Seminar on Focused Ion Beam Nanomachining of Cell Culture Sheet , 15 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2011) Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China.

Ali, Mohammad Yeakub (2011) Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish, 16 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2011) Noble tool based micromilling for nanometric surface finish. Research Report. Ministry of Higher Education, Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Powder mixed micro electro discharge machining (PMμEDM). Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, A. and N., Atiqah (2011) Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, malaysia.

Ali, Mohammad Yeakub and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research, 264. pp. 1352-1356. ISSN 1022-6680

Ali, Mohammad Yeakub and Mohd. Hajar, Nurul Hajar (2011) Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and N.A.R.A., Atiqah and M.A., Erniyati (2011) Silicon carbide powder mixed micro electro discharge milling of titanium alloy. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3). pp. 338-342. ISSN 1823-0334

Amin, A. K. M. Nurul and -, Kok and Mahmud, Md. Asif (2011) Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 49-56. ISBN 9789674181758

Amin, A. K. M. Nurul and A., Abu and D. , Salha A. and S. , Salhana B. (2011) Influence of chatter on tool life during end milling of Aluminium and Aluminium alloy on vertical machining centre (VMC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 75-82. ISBN 9789674181758

Amin, A. K. M. Nurul and Abd Aziz, Amir Akhyar and Mahmud, Md. Asif (2011) A new method for chatter suppression and improvement of surface roughness in end milling of mild steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 83-90. ISBN 9789674181758

Amin, A. K. M. Nurul and Abdelgadir, M. and Kamaruddin, K. (2011) Some aspects of improved machinability in preheated machining of Titanium alloy Ti-6Al-4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 19-26. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Ahmad Dalhan, Salha and Sahidin @ Saleudin, Salhana (2011) Influence of the elastic system and cutting parameters on chatter during end milling of aluminium and aluminium alloy on VMC. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 65-73. ISBN 9789674181758

Amin, A. K. M. Nurul and Alam, S. and -, Syedatul Akma (2011) Optimization of surface roughness in high speed end milling of Titanium alloy Ti-6Al-4V under dry conditions. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 181-187. ISBN 9789674181758

Amin, A. K. M. Nurul and Ali Asharariff, Mohd Amar and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of medium carbon steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 91-97. ISBN 9789674181758

Amin, A. K. M. Nurul and Azhari, A. and Mahmud, Md. Asif (2011) Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 107-115. ISBN 9789674181758

Amin, A. K. M. Nurul and Chong , Chee and -, Sayedatul Akma (2011) Effects of scribing wheel dimensions on LCD glass cutting. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 259-265. ISBN 9789674181758

Amin, A. K. M. Nurul and Dali, Mohd Hasani and Mahmud, Md. Asif (2011) High speed end milling of single crystal silicon using diamond coated tools. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 217-223. ISBN 9789674181758

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2011) Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, 09-17. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo and Ishtiyaq, M. H. (2011) Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 161-166. ISBN 9789674181758

Amin, A. K. M. Nurul and Hafiz, A.M. Khalid and Lajis, M. A. (2011) Development of tool life prediction model of TiAlN coated tools during the high speed hard milling of AISI H13 steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 155-160. ISBN 9789674181758

Amin, A. K. M. Nurul and Hafiz, A.M. Khalid and Lajis, M. A. (2011) Modeling of surface roughness during end milling of AISI H13 hardened tool steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 167-173. ISBN 9789674181758

Amin, A. K. M. Nurul and Hossain, Ishtiaq and Patwari, Muhammed Anayet Ullah (2011) Wear mechanism in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 239-245. ISBN 9789674181758

Amin, A. K. M. Nurul and Kamaruddin, K. and Abdelgadir, M. (2011) Influence of workpiece preheating on chatter and machinability of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, pp. 1-8. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd. Nasir, Siti Nurshahida (2011) High speed end milling of silicon using diamond coated tools with air blowing. In: Invention, Innovation and Technology Exhibition (ITEX) 2011, 20-22 May 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Khalid, Noor Syairah and Mohd. Nasir, Siti Nurshahida (2011) High speed end milling of silicon using diamond coated tools with air blowing. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul (2011) Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 35-42. ISBN 9789674181758

Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul (2011) Heat assisted machining of hardened steel AISI D2. IIUM Press, Kuala Lumpur. ISBN 9789670225791

Amin, A. K. M. Nurul and Mahmoud, Asif (2011) Development of a mathematical model for the prediction of surface roughness in end milling of stainless steel SS 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 133-142. ISBN 9789674181758

Amin, A. K. M. Nurul and Majed, A. Fakhruzi and Daud, M. K. and Patwari, Md Anayet Ullah and Ishtiyaq, M. H. (2011) Investigation of the machinability of Inconel 718 in room temperature and preheated conditions. Advanced Materials Research, 264-65. pp. 1187-1192. ISSN 1022-6680

Amin, A. K. M. Nurul and Mhd Jakin, Aiman and Husin, Hafiz and Mahmud, Md. Asif (2011) The effect of cryogenic cooling in machinability of stainless steel during turning. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 203-207. ISBN 9789674181758

Amin, A. K. M. Nurul and Mohd, Ahmad Azhari and Hadi, Abdul Qayyum (2011) The method of chatter suppression in end milling operation. In: IIUM Research, Invention and Innovation Exhibition 2011 (IRIIE 2011), 9-10 February 2011, Kuala Lumpur, Malaysia.

Amin, A. K. M. Nurul and Mohd Nasir, Siti Nurshahida and Khalid, Noor Syairah (2011) Implementation of high speed of silicon using diamond coated tools with air blowing. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 225-231. ISBN 9789674181758

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Ab. Razak, Nur Hayati (2011) Machinability aspects in heat assisted machining of hardened steel AISI H13 using coated carbide tool. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 27-33. ISBN 9789674181758

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Hazim, A. and Adlan, Z. (2011) Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 209-215. ISBN 9789674181758

Amin, A. K. M. Nurul and Musa, Mohd Dali (2011) High speed end milling of single crystal silicon wafer. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-8111-5

Amin, A. K. M. Nurul and Nashron, F. R. and Zubaire, W. W. D. (2011) Role of the frequency of secondary serrated teeth in chatter formation during turning of carbon steel AISI 1040 and stainless steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 57-64. ISBN 9789674181758

Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Resonance effect in chatter formation in metal cutting. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-0447-3

Amin, A. K. M. Nurul and Syaban, M. and Mahmud, Md. Asif (2011) Elimination of burr formation during end milling of Polymethyl Methacrylate (PMMA) through high speed machining. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 233-237. ISBN 9789674181758

Amin, A. K. M. Nurul and Zakaria, Ahmad Farhan and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 99-106. ISBN 9789674181758

Aminanda, Yulfian and Edy Sutjipto, Agus Geter and Adesta, Erry Yulian Triblas and Castanie, Bruno (2011) Simulation of compression and spring back phenomena of sandwich structure with honeycomb core subjected to low energy and low velocity impact. Key Engineering Materials, 462-63. pp. 1296-1301. ISSN 1662-9795

Amir, Adibah and Mamat, Othman (2011) A review of wear mechanisms of ceramic-reinforced metal-matrix composite: case study of nano silica reinforced iron. Defect and Diffusion Forum, 319-320. pp. 77-84. E-ISSN 1662-9507

Amiriyan, Mahdi and Singh, Ramesh and Sopyan, Iis and Satgunam, Meenaloshini and Tolouei, Ranna and Teng, Wan Dung (2011) Pressureless sintering of electro-conductive zirconia composites. Materials Science Forum, 694. pp. 304-308. ISSN 1662-9752

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Parametric study of carbide precipitation in 16% chromium ferritic stainless steel (FSS) welds. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey. (Unpublished)

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Analysis of sensitization profile in medium chromium ferritic stainless steel (FSS) welds. International Journal of Integrated Engineering, 3 (1). pp. 17-22. ISSN 2229-838X

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Effect of energy input on microstructural features and mechanical properties of medium chromium ferritic stainless steel welds. In: International Conference on Materials Processing Technology (MAPT 2011), 2-3 June 2011, Phuket, Thailand.

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) Exploratory studies on grain refinement in medium chromium ferritic stainless steel welds. Lecture Notes in Information Technology, 1-2. pp. 358-365. ISSN 2070-1918

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2011) An overview of sensitization dynamics in ferritic stainless steel welds. International Journal of Corrosion, 2011. pp. 1-9. ISSN 1687-9325

Amuda , Muhammed Olawale Hakeem and Mridha , Shahjahan (2011) Mechanism of grain refinement in ferritic stainless steel welds: between dendrite fragmentation, grain detachment and heterogeneous nucleation. Journal of Materials Science and Engineering A, 1. pp. 321-327. ISSN 1934-8959

Ani, Mohd Hanafi and Othman, Raihan (2011) Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Principle of solid electrolyte oxygen sensor. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 110-115. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend in application of high temperature ferritic Fe-Cr alloys in power plant. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 104-109. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 116-120. ISBN 9789674181642

Anuar, Hazleen (2011) Novel polylactic acid obtained by chemical and biochemical hydrolysis of kenaf fibre. Project Report. The Academy of Sciences for Developing World (TWAS). (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida (2011) Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering, 42. pp. 462-465. ISSN 1359-8368

Anuar, Hazleen and Ahmad, Zuraida (2011) Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida (2011) Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal, 6 (1). pp. 51-57. ISSN 1823-7789

Anuar, Hazleen and Ahmad, Zuraida and Balint, Morlin and Jozsef Gabor, Kovacs (2011) Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers, 8 (1). pp. 14-26. ISSN 1544-046X (O), 1544-0478 (P)

Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2011) Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Morlin, B. and Kovacs, J. G. (2011) Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials, 471. pp. 781-785. ISSN ISSN: 1013-9826

Anuar, Hazleen and Fuad, Faizah and Kaiser, Mohammad Rejaul and Ahmad, Zuraida and Abdul Razak, Shamsul Bahri (2011) The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC), 22-24 March 2011, Belfast, United Kingdom. (Unpublished)

Anuar, Hazleen and Hassan, N. A. and Mohd Fauzey, F. (2011) Compatibilized PP/EPDM-kenaf fibre composite using melt blending method. Advanced Materials Research, 264. pp. 743-747. ISSN 1022-6680

Anuar, Hazleen and Jamal, Nur Ayuni and Abd Razak, Shamsul Bahri (2011) Effects of high energy radiation on mechanical properties of PP/EPDM nanocomposite. Advanced Materials Research, 264. pp. 738-742. ISSN 1022-6680

Anuar, Hazleen and Jamal, Nur Ayuni and Abd Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)

Anuar, Hazleen and Jamal, Nur Ayuni and Abdul Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: IIUM Research, Invention and Innovation Exhibition IRIIE 2011, 9-10 February 2011, Kuala Lumpur, Malaysia. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Clay Nanocomposite. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)

Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Anuar, Hazleen and Kiaser, M. R. and Razak, S.B.A . (2011) Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials, 26 (2). pp. 216-226. ISSN 0892 - 7057

Anuar, Hazleen and Mel, Maizirwan and Mohamed, Nurhafizah Seeni and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2011) Kenaf: renewable source for biopolymer. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)

B

Bae, K. W. and Mohamed, Mohd Ambri and Jung, DaeWon and Otsuka, Nobuo (2011) Direct exchange interaction of localized spins associated with unpaired sp electrons in Be-doped low-temperature-grown GaAs layers. Journal of Applied Physics, 109 (7). ISSN 0021-8979

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2011) Microstructure and electrical properties of AZO films prepared by RF magnetron sputtering. Advanced Materials Research, 264-65. pp. 754-759. ISSN 1662-8985

D

Diana, Farah and Iis, Sopyan and Mel, Maizirwan (2011) Synthesis of Ti02 N anosized Powder Photocatalyst Via Solgel Method for Bacteria Inactivation Application. Malaysian Journal of Microscopy, 7. pp. 161-169. ISSN 1823-7010

E

Edy Sutjipto, Agus Geter and Triwiyanto, A and Aminanda, Yulfian and Fekry Faris, Waleed and Adesta, Erry Yulian Triblas (2011) Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85. pp. 557-561. ISSN 1660-9336

El-hadie, M and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for room temperature end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 331-337. ISBN 9780980825107

El-hadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for preheated end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 576-582. ISBN 978-0-9808251-0-7

Elhadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2011) Machining cost in conventional and hot machining: comparison and modelling. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-1703-9-5

F

Fadli, Ahmad and Sopyan, Iis (2011) Porous ceramics with controllable properties prepared by protein foaming-consolidation method. Journal of Porous Materials, 18 (2). pp. 195-203. ISSN 1380-2224 (P), 1573-4854 (O)

Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Sutjipto, Agus Geter Edy (2011) Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 456-460. ISSN 1991-8178

G

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 189-194. ISBN 9789674181758

H

Halim, Zahurin and Ahmad, Zuraida and Samat, Noorasikin and Anuar, Hazleen (2011) Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13 - 16 July 2011, Istanbul, Turkey. (Unpublished)

Haris, Mohd Yusoff/M.Y. and Laila, Dayang/D and Zainudin , Edisyam/E.S and Mustapha, Faizal/F and Zahari, Rizal/R and Halim, Zahurin/Z (2011) Preliminary Review of Biocomposites Materials for Aircraft Radome Application. Key Engineering Materials, 471-72. pp. 563-568. ISSN 1013-9826

Haruman, Esa and Yong, Sun and Triwiyanto, Askar and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2011) A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace. High Temp. Mater. Proc, 1-2. pp. 23-29. ISSN 0334-6455 (print); 2191-0324 (online)

Hassan, Noor Azlina and Ahmad, Sahrim and Rasid, Rozaidi and Abd Razak, Shamsul Bahri and Y. , Yamamoto and S. , Kawahara (2011) Oxygen barrier properties of new thermoplastic natural rubber nanocomposites. Polymer-Plastics Technology and Engineering, 50. pp. 1564-1569. ISSN 1525-6111 (O), 0360-2559 (P)

Hassan, Noor Azlina and Haji Ahmad, Sahrim and Rasid, Rozaidi (2011) Enhanced tensile and dynamic mechanical properties of thermoplastic natural rubber nanocomposites. Polymer-Plastics Technology and Engineering, 50 (13). pp. 1383-1387. ISSN 0360-2559 (print), 1525-6111 (online)

Hassan, Noor Azlina and Hassan, Norita (2011) Polymer clay nanocomposite: Part 1. In: Advance in Materials Engineering. IIUM Press, Kuala Lumpur, pp. 6-10. ISBN 9789674181673

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Development of an artificial neural network algorithm for predicting the cutting force in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 143-148. ISBN 9789674181758

Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 195-202. ISBN 9789674181758

Hossain, Mohammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Artificial neural network algorithm for predicting the surface roughness in end milling of Inconel 718 alloy. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM university press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 149-154. ISBN 9789674181758

I

Ibrahim, Nor Azowa and Wan Yunus, Wan Md Zin and Othman, Maizatulnisa and Abdan, Khalina (2011) Effect of chemical surface treatment on the mechanical properties of reinforced plasticized poly(lactic acid) biodegradable composites. Journal of Reinforced Plastics & Composite, 30 (5). pp. 381-388. ISSN 0731-6844 E-ISSN 1530-7964

Iis, Sopyan (2011) Synthesis of hydroxyapatite through dry mechanomical method and its conversion to dense bodies: preliminary result. IFMBE proceedings, 35. pp. 97-101. ISSN 16800737

Iis, Sopyan and Singh, Ramesh and Nawawi, Natasha Ahmad and Anna, Tampieri and Simone, Sprio (2011) Effects of manganese doping on the dielectric properties of titanium dioxide ceramics. Ceramics International, 37 (8). pp. 3703-3715. ISSN 0272-8842

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah (2011) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 123-131. ISBN 9789674181758

Ismail, Roslina and Yaacob, Iskandar Idris (2011) Synthesis and characterization Of nanocrystalline Ni3Al intermetallic produced by mechanical alloying and reaction synthesis. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 23-28. ISBN 9789674182311

J

Jaafar, Israd Hakim and LeBlon, Courtney E. and Wei, Ming-Tzo and Ou-Yang, Daniel and Coulter, John P. and Jedlicka, Sabrina S. (2011) Improving fluorescence imaging of biological cells on biomedical polymers. Acta Biomaterialia, 7 (4). pp. 1588-1598. ISSN 1742-7061

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effect of electron beam irradiation (EB) on gas barrier property of HDPE/EPDM nanocomposites. Key Engineering Materials, 471. pp. 775-780. ISSN ISSN: 1013-9826

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Enhancing the mechanical properties of cross-linked rubber-toughened nanocomposites via electron beam Irradiation. Journal of Nanotechnology. ISSN 1687-9503

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) The influence of EB-irradiated treatment on enhancing barrier property and crystallization behavior of rubber-toughened nanocomposites. Journal of Nanotechnology, 2011. 8 pg.. ISSN 1687-9503 (P), 1687-9511 (O)

Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak , Shamsul Bahri (2011) The effects of high energy radiation on the tensile properties of rubber toughened nanocomposites. Advanced Materials Research, 264. pp. 765-770. ISSN 1022-6680

K

K. L., Aw and Ranna, Tolouei and Singh, Ramesh and Tan, Chou Yong and W,, H. Yeo and H., Kelvin and Iis, Sopyan and Teng, Wan Dung (2011) Effects of powder synthesis method on the sinterability of hydroxyapatite. Advanced Materials Research, 264/5. pp. 1538-1544. ISSN 1022-6680

Kaderi, Akbar and Mohd Zainal, Ahmad Zaki and Ani, Mohd Hanafi and Othman, Raihan (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. IIUM Engineering Journal, 12 (5). pp. 69-78. ISSN 1511-788X

Kaiser, Mohammad Rejaul and Anuar, Hazleen (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Kenaf Hybrid Bio-composite. In: International Conference on Chemical Engineering (ICChE 2011), 29-30 December 2011, Dhaka, Bangladesh. (Unpublished)

Karim, A.N. Mustafizul and Lajis, M.A. and Amin, A. K. M. Nurul (2011) Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts. Advanced Materials Research, 264-65. pp. 907-912. ISSN 1662-8985

Khalid, Khalisanni and Khalid, Khalizani and Othman, Maizatulnisa and Ku Hamid, Ku Halim and Chowdury, Zaira Zaman (2011) Determination of some properties of used cooking oil using AAS, bomb calorimeter and GC-MS techniques. Oriental Journal of Chemistry, 27 (3). pp. 1045-1048. ISSN 0970-020

Khan, Ahsan Ali and Abdulkareem, Suleuman and Ahmad Abdul Ghani, Nadiatul Amirah and Mohammad Ariffin, Dayanna Sarah (2011) Investigation on the surface finish, MRR and the surface damage during the EDM of tungsten carbide. Advanced Materials Research, 264-65. pp. 1073-1078. ISSN 1022-6680

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 44-48. ISBN 9789674181628

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 33-37. ISBN 9789674181628

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Khan, Ahsan Ali and Aman Nor Rasid, Zuraida and Yusof, Izausmawati (2011) A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 196-200. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed, Baba Ndaliman (2011) An introduction to electrical discharge machining (EDM). In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 65-69. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed, Baba Ndaliman and Mohammad , Yeakub Ali (2011) Developments in EDM process variables. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 70-75. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface Modification using Electric Discharge Machining (EDM) with powder addition. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), 26-28 February 2011, Singapore.

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface modification using Electric Discharge Machining (EDM) with powder addition. Applied Mechanics and Materials, 110/6. pp. 725-733. ISSN 1660-9336 (O), 978-303785262-0 (P)

Khan, Ahsan Ali and Mohd Ali , Munira and Mohd Shaffiar , Norhashimah (2011) Relationship between machining variables and process characteristics during wire EDM. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 28-32. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) Features of EDM of mild steel with Ta-Cu powder compacted electrodes. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 23-27. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) A study on material removal rate during EDM with tantalum carbide-copper compacted electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 18-22. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Noh, Nurul Shima (2011) Role of current, voltage and spark on-time on electrode material migration during EDM. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 12-17. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Features of electrode wear during EDM of mild steel with TaC-Cu powder compacted electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 49-53. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Influence of current, spark on-time and off-time on electrode wear during EDM of mild steel. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 54-58. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) A comparative study on work surface hardness EDMed by Ta-C powder compacted and copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 59-64. ISBN 9789674181628

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Tool wear rate during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 2-6. ISBN 9789674181628

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 7-11. ISBN 9789674181628

Khan, Ahsan Ali (2011) Role of heat transfer on process characteristics during electrical discharge machining. In: Developments in Heat Transfer. InTech (Open access book), pp. 417-436. ISBN 978-953-307-569-3

Khan, Md. Ashikur Rahman and Maleque, Md. Abdul and Rahman, M.M. Hafizur and Kadirgama, K. and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2). pp. 503-507. ISSN 2010-376X E-ISSN 2010-3778

Khan, Md. Ashikur Rahman and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

Khan, Md. Ashikur Rahman and Rahman, Mohammad Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74. pp. 198-202. ISSN 1307-6884

L

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Modeling in preheated machining of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 43-48. ISBN 9789674181758

Lajis, M. Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, Khaled (2011) Modelling of tool life by response surface methodology in hard milling of AISI D2 tool steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 175-179. ISBN 9789674181758

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985

M

M., Norhidayah and H. M., Yupiter and J., Roseleena and A., Shaharudin and Adesta, Erry Yulian Triblas (2011) Development of virtual assembly layout with modeling languages approach and simulation using Delmia™ Quest®. IIUM Engineering Journal, 12 (6). pp. 9-20. ISSN 1511-788X

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) PCD inserts in end milling of Aluminum Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 253-257. ISBN 9789674181758

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8

Maleque, Md. Abdul (2011) Technology of moulding for composite auto brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 7-12. ISBN 9789674182311

Maleque, Md. Abdul (2011) Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul (2011) A critical review of metal matrix composite brake rotor. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674182311

Maleque, Md. Abdul and ., Arifutzzaman (2011) Reverse engineering of automotive piston. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 86-91. ISBN 9789674181642

Maleque, Md. Abdul and A., Atiqah and R. J., Talib and Halim, Zahurin (2011) New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and A. R., Zamani and R. J., Talib (2011) Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Maleque, Md. Abdul and Adebisi, Adetayo A. (2011) Energy efficient lighter weight aluminium matrix composite automotive brake motor. In: International Conference On Harnessing Technology (ICHT) 2011, , 13-14 February, Muscat, Oman.

Maleque, Md. Abdul and Adebisi, Adetayo A. (2011) Thermal profile analysis of composite brake rotor. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 165-171. ISBN 9789674181673

Maleque, Md. Abdul and Afdzaluddin, Atiqah (2011) Reverse engineering for automotive fuel tank. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 121-126. ISBN 9789674181642

Maleque, Md. Abdul and Hossain, M. Sayeed and Dyuti, S. (2011) Material properties and design aspects of folding bicycle frame. Advanced Materials Research, 264-. pp. 777-782. ISSN 1022-6680

Maleque, Md. Abdul and Karim, Md. Rezaul and Yassin, N. (2011) Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research, 264-65. pp. 278-283. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research, 264. pp. 1648-1653. ISSN 1022-6680

Maleque, Md. Abdul and Rahman, Md. Mustafizur and Hossain, Sayeed (2011) Reverse engineering of motorcycle chain. Advanced Materials Research, 264-26. pp. 1678-1683. ISSN 1022-6680

Manshor, Hanisah and Othman, Raihan and Nordin, Anis Nurashikin and Ani, Mohd Hanafi and Saputra, Hens (2011) Observation on responsive OCV variation od Zinc-Air cell with relative humidity content. IIUM Engineering Journal, 12 (5). pp. 79-86. ISSN 1511-788X

Mat Noor, Muhamad and A/L Kadirgama, Kumaran and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264. pp. 943-948. ISSN 1022-6680

Mat Noor, Muhamad and Kadirgama, K. and Rahman, Md. Mustafizur and Maleque, Md. Abdul (2011) Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264-. pp. 949-955. ISSN 1022-6680

Md. Azizan, Farihan and Purwanto, Hadi and Adesta, Erry Yulian Triblas and Mustafa, Mohd. Yusry (2011) Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)

Mohamad, Souad A. (2011) Electrodeposited CdS/CdTe solar cells. In: Advances in Materials Engineering. IIUM Press, Kuala Lumpur, pp. 61-64. ISBN 9789674181680

Mohamad, Souad A. (2011) Ethical and effective teaching at higher education. In: 2nd International Conference on Professional Ethics and Education in Engineering ( ICEPEE‘11), 17-19 May 2011, Kuala Lumpur.

Mohamad, Souad A. (2011) Inorganic / organic /inorganic double junction thin film solar cells. In: Advances in Materials Engineering - Volume 2. IIUM, Malaysia, pp. 92-95. ISBN 9789674181680

Mohamad, Souad A. (2011) ZnO / polymer junction growth for hybrid solar cell applications. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 194-197. ISBN 9789674181680

Mohamad, Souad A. and Alaei, Iraj (2011) Natural dye coated nanocrystalline Tio2 electrode films for DSSCs. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 106-108. ISBN 9789674181680

Mohamad, Souad A. and Basirun, Wan Jefrey and Ibrahim, Zainol Abidin and Mohd Arof, Abdul Kariem and Ebadi, Mehdi (2011) Controlled potential electrodeposition and characterization of znte thin films on indium tin oxides. Advanced Materials Research, 264. pp. 726-731. ISSN 1022-6680

Mohamad, Souad A. and Basirun, Wan Jefrey and Ibrahim, Zainol Abidin and Mohd Arof, Abdul Kariem and Ebadi, Mehdi (2011) Structure characterization of electrodeposited zinc selenide thin films. Advanced Materials Research, 264. pp. 732-737. ISSN 1022-6680

Mohamad Selamat, Norfazilah and Purwanto, Hadi and Fairos, Siti (2011) Treatment of iron ore using biomass waste for ironmaking. In: International Renewable Energy & Environment Conference (IREEC 2011), 24-26 June 2011, Kuala Lumpur. (Unpublished)

Mohamed Ariff, Tasnim Firdaus and Thauri, Shahdura Hammad and Karim, A.N. Mustafizul (2011) Enhancing mechanical and structural properties of TiC inserts using microwave energy. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011), 6th-7th June 2011, Putrajaya, Kuala Lumpur.

Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohd. Zain, Zakaria (2011) Performance of PM compacted Cu-TaC electrodes during EDM. In: 2nd International Conference on Mechanical & Manufacturing Engineering 2011, (ICME 2011), 6-7 June 2011, Putrajaya, Malaysia.

Mohammed , Baba Ndaliman and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrode for EDM. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 ICMAAE '11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Ali, M. Y. (2011) Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Mohd, Alias and Hindle, C. and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Mould filling and pressure distribution for polymer resins. Advanced Materials Research, 264/65. pp. 771-776. ISSN 1022-6680

Mohd Ali, Afifah and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research, 264-65. pp. 1015-1020. ISSN 1022-6680

Mohd Ali , Afifah and Adesta, Erry Yulian Triblas and Agusman, Delvis and Mohamad Badari, Siti Norbahiyah and Al Hazza, Muataz Hazza Faizi (2011) Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research, 4 (3). pp. 255-263. ISSN 1992-1454

Mohd Daud, Farah Diana and Iis, Sopyan and Mel, Maizirwan (2011) Synthesis of TiO2 nanosized powder photocatalyst via sol-gel method for bacteria inactivation application. Malaysian Journal of Microscopy, 7. pp. 161-169. ISSN 1823-7010

Mohd Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2011) Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research, 264. pp. 1346-1351. ISSN 1022-6680

Mohd Nasir, Nur Aimi and Mustafa Kamalbahrin, Mohd Adlan and Mohamed, Nurhafizah Seeni and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Effect of Rhizopus Oryzae Fermentation on Kenaf-based Polylactic Acid’s Monomer. IIUM Engineering Journal, 12 (4). pp. 83-87. ISSN 1511-788X

Mohd Zain, Zakaria and Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Influence of TaC Powder Additive on electrical discharge machining of stainless Steel. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7 June 2011, Batu Pahat, Johor.

Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Kenaf as natural resource for lactic acid production. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Mokhtar, Suhaily and Amin, A. K. M. Nurul and Patwari, Md Anayet Ullah and Abdul Razak, Nurhayati (2011) Machinability improvement by workpiece preheating during end milling AISI H13 hardened steel. Advanced Materials Research, 264-65 (2). pp. 894-900. ISSN 1662-8985

Mridha, Shahjahan (2011) Quality of Cu Film electrodeposited on silicon wafer using different current densities. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 373-380. ISBN 9789670225685

Mridha, Shahjahan and Law, Shao Beng (2011) Influences of additives on copper film quality and gap filling capability of plating process. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 34-40. ISBN 9789674181642

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Muhammed Olawale Hakeem, Amuda and Mridha, Shahjahan (2011) A novel scheme for weld microstructure control using cryogenic cooling. Advanced Materials Research, 264/65. pp. 343-348. ISSN 1662-8985

Mustafa, Mohd. Yusry and Adesta, Erry Yulian Triblas and Purwanto, Hadi and Md. Azizan, Farihan (2011) Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)

Mustafa Kamalbhrin, Mohd. Adlan and N. , Nuraisyah and Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi (2011) Kenaf biomass as potential biopolymer. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

N

Nainar, S. Mohammed and Begum, Shahida and Mohamad, Bashir and Hassan, Zaimah and Ansari, M.N.M. and Anuar, Hazleen and Shanks, Robert A. (2011) Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. In: 20th Scientific Conference of the Microscopy society of Malaysia (EMSM 2011), 20th - 22nd December 2011, Port Disckson, Negeri Sembilan.

Nawawi, Natasha A and Alqap, Asep Sofwan F. and Sopyan, Iis (2011) Recent progress on hydroxyapatite-based dense biomaterials for load bearing bone substitutes. Recent Patents on Materials Science, 4. pp. 63-80. ISSN 1874-4656

Ndaliman, Mohammed Baba and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrodes for EDM. Journal of Mechanics Engineering and Automation, 1 (5). pp. 385-391. ISSN 2159-5275 (P); 2159-5283 (O)

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering, 6 (3). pp. 380-384. ISSN 1823-0334

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens (2011) High discharge rate electrodeposited zinc electrode for use in alkaline microbattery. IIUM Engineering Journal, 12 (5). pp. 115-122. ISSN 1511-788X

O

Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 49-54. ISBN 9789674182311

Omar, Mohd Afian and Subuki, Istikamah and Abdullah, Nor Syakira and Alias, Tuti Yasmin (2011) Feedstock preparation of injection moulded stainless steel using biodegradable starch binder. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 79-86. ISBN 9789674181635

P

Patwari, Muhammed Anayet Ullah and A.K.M., Nurul Amin and Faris, Waleed Fekry (2011) Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65. pp. 1160-1165. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Alam, Md. Shah (2011) Improvement of surface roughness in end milling of Ti6Al4V by coupling RSM with genetic algorithm. Advanced Materials Research, 264/65. pp. 1154-1159. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 117-122. ISBN 9789674181758

Pham, Duc Trung and Shwe, S. and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and -, Farizahani (2011) Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science, 2011, united kingdom. (Unpublished)

Purwanto, Hadi and Wan Mohd, Wan Roslina and Hassin, Noor Farizahani (2011) Zero emission processing of waste aluminium foil. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Pusparini, Erlani and Sopyan, Iis and Abd Shukor , Mohamad Hamdi and Ramesh, Singh (2011) Sodium-doped hydroxyapatite nanopowder through sol-gel method: synthesis and characterization. Materials Science Forum, 694. pp. 128-132. ISSN 1662-9752

R

Rahman, Md. Mustafizur and Khan, Md. Ashikur Rahman and Kadirgama, Kumaran and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: Computers and simulation in modern science. Computers and simulation in modern science, V (Vol.5). WSEAS Press, pp. 107-113. ISBN ISBN: 978-960-474-300-1, ISSN: 1762-6882

Rahman, Md. Mustafizur and Mat Noor, Muhamad and Kadirgama, K. and Maleque, Md. Abdul and Abu Bakar, Rosli (2011) Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research, 264. pp. 1557-1562. ISSN 1022-6680

Rahman Khan, Md. Ashikur and Rahman, M. M. and Kadirgama, Kumaran and Maleque, Md. Abdul and Ishak, M. (2011) Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model. Journal of Mechanical Engineering and Sciences (JMES), 1. pp. 16-24. ISSN 2231-8380

Rahman Khan, Md. Ashikur and Rahman, Md. Mustafizur and Mat Noor, Muhamad and Maleque, Md. Abdul (2011) Current research trends on dry, near-dry and powder mixed electrical discharge machining. Advanced Materials Research, 264. pp. 956-961. ISSN 1022-6680

Ramesh, Singh and Tan, Chou Yong and Yeo, W. H. and Tolouei, Ranna and Amiriyan, Mahdi and Sopyan, Iis and Teng, Wan Dung (2011) Effects of bismuth oxide on the sinterability of hydroxyapatite. Ceramics International, 37 (2). pp. 599-606. ISSN 0272-8842

Ranna, Tolouei and C.Y., Tan and S., Ramesh and Iis, Sopyan and W.D., Teng (2011) Effect of nano silica on the sinterability of hydroxyapatite dense bodies. Advanced Materials Research, 2634-5. pp. 1832-1838. ISSN 1022-6680

S

Salit, Mohd. Sapuan and Mohamed, Abd. Rahman and Siregar, Januar Parlaungan and Ishak, Mohd. Ridzuan (2011) Pineapple leaf fibers and PALF-reinforced polymer composites. In: Cellulose fibers: bio- and nano-polymer composites: green chemistry and technology. Springer-Verlag, Berlin, pp. 325-343. ISBN 9783642173691

Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Mohd. Sibi, Nurhanis (2011) Optimizing the pre-treatment of kenaf bast. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)

Seoh, Hian Teh and Yaacob, Iskandar Idris (2011) The effect of cobalt addition on structural and magnetic properties of electrodeposited iron-platinum nanocrystalline thin films. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 155-162. ISBN 9789674181642

Shaffiar, Norhashimah and Laib, Z. B. and Tam, M. N. (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-63. pp. 1409-1414. ISSN 1013-9826

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons. Advanced Materials Research, 264-65. pp. 1933-1938. ISSN 1022-6680

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Wear characteristics of Fe-C-Si and Fe-C-Al cast irons. Advanced Materials Research, 264-65. pp. 1928-1932. ISSN 1022-6680

Shaha, Sugrib Kumar and Khan, Ahsan Ali and Haque, Md. Mohafizul (2011) Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint. Journal of Materials Science and Engineering B, 1. pp. 184-189. ISSN 0921-5107

Singh, Ramesh and Ranna, Tolouei and Tan, Chou Yong and K. L., Aw and W., H. Yeo and Iis, Sopyan and Teng, Wan Dung (2011) Sintering of hydroxyapatite ceramic produced by wet chemical method. Advanced Materials Research, 264/65. pp. 1856-1861. ISSN 1022-6680

Sopyan, Iis and ., Ahmad Fadli and Zulkifli, Nur Izzati (2011) Porous alumina-hydroxyapatite composites via protein foaming-consolidation method: effect of HA loading on physical properties. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 132-136. ISBN 9789674181673

Sopyan, Iis and Fadli, Ahmad and Mel, Maizirwan (2011) Effect of hydroxyapatite and tricalcium phosphate addition on protein foaming-consolidation porous alumina. Journal of Porous Materials. ISSN 1380-2224 (P), 1573-4854 (O)

Sopyan, Iis and Hafizah, Nor and Jamal, Parveen (2011) Immobilization of TiO2 with cement: photocatalytic degradation of phenol and its kinetic studies. Indian Journal of Chemical Technology, 18 (4). pp. 263-270. ISSN 0975-0991 (O); 0971-457X (P)

Sopyan, Iis and Nawawi, Natasha Ahmad and Shah, Qasim Hussain and Ramesh, Singh and Tan, Chou Yong and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26. pp. 908-914. ISSN 1532-2475 ; 1042-6914

Sopyan, Iis and Syed Abu Bakar, Sharifah Adzila and Abd Shukor, Mohd Hamdi (2011) Effect of milling time on mechanochemically synthesized nanohydroxyapatite bioceramics. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 149-154. ISBN 9789674181673

Sudin, Izman and Abdul-Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohd Nazim and Nalisa, Adila and Konneh, Mohamed (2011) Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate. Advanced Materials Research, 197. pp. 219-224. ISSN 1022-6680

Suhaily, Mokhtar and Amin, A. K. M. Nurul and Patwari, Md Anayet Ullah (2011) Prediction of surface roughness in high speed machining of Inconel 718. Advanced Materials Research, 264-65. pp. 1193-1198. ISSN 1662-8985

Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Piezoelectric effect of zinc oxide thin film as source of energy for sensor applications. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 135-140. ISBN 9789674181642

Sutjipto, Agus Geter Edy and Muhida, Riza (2011) Green nanotechnology using SEM and AFM. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 147-153. ISBN 9789674181642

Syed Abdul Bahari, Syed Najib and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Quality improvement of Three-way Catalytic Converter (TWC) system: application of failure modes and effects analysis (FMEA) methodology. LAP Lambert Academic Publishing, Germany. ISBN 9783845443287

Syed Abu Bakar, Sharifah Adzila and Sopyan, Iis and Abd Shukor , Mohamad Hamdi and Ramesh, Singh (2011) Mechanochemical synthesis of nanosized hydroxyyapatite powder and its conversion to dense bodies. Materials Science Forum, 694. pp. 118-122. ISSN 0255-5476

T

Tan, Chou Yong and Singh, Ramesh and Ranna, Tolouei and Iis, Sopyan and Teng, Wan Dung (2011) Synthesis of high fracture toughness of hydroxyapatite bioceramics. Advanced Materials Research, 264/5. pp. 1849-1855. ISSN 1022-6680

Teh, Seoh Hian and Yaacob, Iskandar Idris (2011) Synthesis and characterization of Co-Fe nanocrystalline magnetic films electrodeposited from electrolyte solution containing sodium saccharin. IEEE Transactions on Magnetics, 47 (10). pp. 4398-4401. ISSN 0018-9464

Thauri, Shahdura Hammad and Mohamed Ariff, Tasnim Firdaus and Karim, A.N. Mustafizul (2011) Study of TiC cutting tool insert using microwave synthesis. Applied Mechanics and Materials, 52-54. pp. 2116-2121. ISSN 1660-9336

Tolouei, Ranna and Singh, Ramesh and Sopyan, Iis and Yong, Tan Chou and Amiriyan, Mahdi and Dung, Teng Wan (2011) Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics. Materials Science Forum, 694. pp. 391-395. ISSN 0255-5476

W

W., H. Yeo and Singh, Ramesh and Tan, Chou Yong and Aw, K. L. and Ranna, Tolouei and H., Kelvin and Iis, Sopyan and Teng, Wan Dung and Hoque, Md Enamul (2011) Effects of bismuth oxide on the properties of calcium phosphate bioceramics. Advanced Materials Research, 264/5. pp. 1839-1848. ISSN 1022-6680

Wan Mohd, Wan Roslina and Purwanto, Hadi (2011) Production of fine alumina from waste aluminum can. In: International Renewable Energy & Environment Conference (IREEC 2011), 24-26 June 2011, Kuala Lumpur. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011) , 25–28 September 2011, Langkawi, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Nasir, S. A. and Ahmad, W. M. H. and Adesta, Erry Yulian Triblas (2011) Investigation of the effect of "Orange Peel" surface texture on the laser sintered part. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2011) Improvement of powder management and recycling in laser sintering. In: International Conference on Manufacturing and Industrial Engineering, (ICMIE), 24-26 June 2011, Paris, France.

Y

Yaacob, Iskandar Idris (2011) Mechanochemical synthesis of CeO2 nanopowder using platenary ball mining. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 163-169. ISBN 9789674181642

Yaacob, Iskandar Idris and H.K., Jun (2011) Investigation of mechanically alloyed Nd-Fe-B powder. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 17-22. ISBN 9789674182311

Yusof, Yusliza and Ahmad, Zuraida (2011) The effect of fiber content on cotton reinforced albumen composites. IIUM Engineering Journal, 12 (2). ISSN 1511-788X

Z

Zain, Zakaria Mohd and Khan, Ahsan Ali and Abdulkareem, Suleiman (2011) Influence of electrode profiles on electrical discharge machining of titanium. Advanced Materials Research, 264-65. pp. 1205-1210. ISSN 1022-6680

This list was generated on Fri Dec 4 11:14:44 2020 +08.