Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2024

A

Abd Razak, Najihah and Azami, Muhammad Hanafi (2024) Investigation on regression rate behavior of polylactic acid manufactured by fused deposition modelling for hybrid rocket motor. Journaal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 157-165. ISSN 1990-7710

Aryo Putro Satriyono, Raden Danang and Pebrianti, Dwi and Asmara Sakti, Arga Seta (2024) Micro small medium enterprises intention to implement circular economy in Solo, Indonesia. In: The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023), 7-8 December 2023, Surakarta, Indonesia.

Azami, Muhammad Hanafi (2024) Euclid: misi merungkai misteri besar alam semesta. Risalah Falak. p. 14.

B

Baghdadi, Faical and Hrairi, Meftah and Asrar, Waqar (2024) A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6). pp. 157-168. E-ISSN 2180 - 1363

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

E

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

F

Fayaz, Hussain and Ramesh, S. and Afzal, Asif and Agbulut, Ümit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. pp. 1-15. E-ISSN 2451-9049

Fiqri, Muhammad Ikhwan and Ahmed Pathan, Khizer and Khan, Sher Afghan (2024) Control of suddenly expanded flow with cavity at sonic Mach number. In: Advances in Heat Transfer and Fluid Dynamics. Select Proceedings of AHTFD 2022 . Springer, pp. 1-425. ISBN 978-981-99-7212-8

H

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar (2024) Numerical prediction of trailing edge noise at low Reynolds number with modified trailing edges of a NACA 0015 airfoil. CFD Letters, 16 (8). pp. 64-94. ISSN 2180-1363 E-ISSN 2180-1363

Hassan, Mohamed Ibren and Asrar, Waqar and Ismail, Muhammad Ariffuddin and Andan, Amelda Dianne (2024) Experimental investigation on the aerodynamic parameters of trailing edge wake generators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 1-16. ISSN 2289-7879

J

Jain, Yogesh Kumar and Kurkute, Vijay and Deshmukh, Sagar Mane and Pathan, Khizar Ahmed and Attar, Ajaj Rashid and Khan, Sher Afghan (2024) The influence of plate fin heat sink orientation under natural convection on thermal performance: an experimental and numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 118-129. ISSN 2289-7879

Jilte, Ravindra and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Venkatesan, Elumalai Perumal and Munimathan, Arunkumar (2024) Cooling performance of a Li-ion cylindrical battery pack with liquid circulating pipes embedded in phase change material. Journal of Energy Storage, 87 (111335). pp. 1-15. ISSN 2352-152X

K

Khan, Ambareen and Khan, Sher Afghan and Raja, Vijayanandh and Aabid, Abdul and Baig, Muneer (2024) Effect of ribs in a suddenly expanded flow at sonic Mach number. Heliyon, 10. pp. 1-17. ISSN 2405-8440

M

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Comprehensive analysis of geometric hole designs and configurations in film cooling for gas turbine engines: a critical review. Journal of Aeronautics, Astronautics and Aviation, 56. pp. 187-218. ISSN 1990-7710

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Numerical investigation of heat transfer enhancement via dimpled target surface configuration and jet arrangement in impingement cooling. Journal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 93-106. ISSN 1990-7710

P

Pebrianti, Dwi and Ahmad, Denis and Bayuaji, Luhur and Wijayanti, Linda and Mulyadi, Melisa (2024) Using content-based filtering and apriori for recommendation systems in a smart shopping system. Indonesian Journal of Computing, Engineering and Design, 6 (1). pp. 58-70. ISSN 2656-1972 E-ISSN 2656-8179

Pebrianti, Dwi and Kurniawan, Haris and Bayuaji, Luhur and Rusdah, Rusdah (2024) XgBoost hyper-parameter tuning using Particle Swarm Optimization for stock price forecasting. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 9 (4). pp. 1179-1195. ISSN 2338-3070 E-ISSN 2338-3062

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue and methyl orange dye by using the core-shell structure of Fe3O4@ZnS nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 42-55. ISSN 2756-8210

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue dye by using different nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 1-17. ISSN 2756-8210

Pratama, Maulana Krisna Bayu and Dewi, Yulia Puspita and Kusumawati, Tri Ika Jaya and Pebrianti, Dwi (2024) Designing a laboratory assistant attendance system using Radio Frequency Identification (RFID) technology based on IOT. Jurnal Inovasi danTeknologi Pembelajaran, 11 (1). pp. 43-54. ISSN 2406-8780 E-ISSN 2654-7953

Q

Quadros, Jaimon D. and Khan, Sher Afghan and Mohin, Ma and Mogul, Yakub I. and Baig, Muneer and Aabid, Abdul (2024) Heat transfer of Ca (NO3)2‑KNO3 molten salt mixtures for austempering and martempering processes of steels. ACS Omega, 9 (15). pp. 17266-17275. E-ISSN 2470-1343

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

R

Ridwan, Ridwan and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2024) Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 32-49. E-ISSN 2289-7879

Rossiter, John Anthony and Abdullah, Muhammad and Aftab, Muhammad Saleheen (2024) Improving the feedforward component for recent variants of predictive functional control. Processes, 12 (1). pp. 1-15. E-ISSN 2227-9717

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

S

Satriawan, Sukma and Setiawan, Agus and Pebrianti, Dwi and Md. Zain, Zainah (2024) The effect of pin length and compressive force in double side friction stir welding on bending strength of AA1100. Journal of Evrimata: Mechanical Engineering, 1 (1). pp. 9-13. E-ISSN XXXX-XXXX

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2024) Influence of sweep angle on the surface pressure of delta wing along pivot positions at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 172-191. ISSN 2289-7879

V

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343 (In Press)

W

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Y

Yaknesh, Sambath and Rajamurugu, Natarajan and Babu, Prakash K. and Subramaniyan, Saravanakumar and Khan, Sher Afghan and Saleel, C. Ahamed and Alam, Mohammad Nur‑E and Soudagar, Manzoore Elahi Mohammad (2024) A technical perspective on integrating artificial intelligence to solid‑state welding. International Journal of Advanced Manufacturing Technology, 154 (13524). pp. 1-26. ISSN 0268-3768 E-ISSN 1433-3015