Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2024

Article

Abd Razak, Najihah and Azami, Muhammad Hanafi (2024) Investigation on regression rate behavior of polylactic acid manufactured by fused deposition modelling for hybrid rocket motor. Journaal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 157-165. ISSN 1990-7710

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam (2024) Influence of adhesive curing temperature and geometrical parameters on composite patch repair of cracked structures. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 119 (1). pp. 1-12. ISSN 2289-7879

Abdulla, Mohammed and Hrairi, Meftah and Aabid, Abdul and Abdullah, Nur Azam and Baig, Muneer (2024) Comparative analysis of active bonded piezoelectric repair systems for damaged structures under mechanical and thermo-mechanical loads. Actuators, 13 (10). pp. 1-28. E-ISSN 2076-0825

Abdullah, Nur Azam (2024) BRICS membership enables Malaysia to progress with advanced tech. New Straits Times, 21 June 2024.

Abdullah, Nur Azam (2024) Integrasi teknologi, aset tempur berinovasi perkukuh peranan ATM. Berita Harian. p. 10.

Abdullah, Nur Azam (2024) Kajian pergolakan udara ekstrem dalam pesawat perlu berterusan. Berita Harian, MukaSepuluh (26hb Mei 2024). p. 10.

Abdullah, Nur Azam (2024) Penyertaan BRICS pacu sektor aeroangkasa, AI. Berita Harian, 24 June 2024. p. 11.

Abdullah Hashim, Azrul Azim and Abdul Ghani, Nor Maniha and Ahmad, Salmiah and Nasir, Ahmad Nor Kasruddin (2024) System identification and control of linear electromechanical actuator using PI controller based metaheuristic approach. Applications of Modelling and Simulation, 8. pp. 213-224. E-ISSN 2600-8084

Ahmad Fakhruddin, Ahmad ‘Afy and Mahboobali, Fharukh Ahmed Ghasi and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan and Pathan, Khizar Ahmed (2024) Analysis of base pressure control with ribs at Mach 1.2 using CFD method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 123 (1). pp. 108-143. ISSN 2289-7879

Ahmed, Zaheer and Hrairi, Meftah and Yazid, Zakwan (2024) Numerical evaluation of adhesive bonding quality using electromechanical impedance technique. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 122-135. ISSN 2289-7895

Alfina, Nurrahman and Fressy, Nugroho and I.G.P, Asto Buditjahjanto and Pebrianti, Dwi and Jehad, A.H. Hammad and Moch, Fachri and Tri Mukti, Lestari and Dian, Maharani and Aji Bagas, Prakasa (2024) Application of multi-criteria promethee method to assist character selection in the endless runner game. Jurnal Teknik Informatika (JUTIF), 5 (4). pp. 1181-1189. ISSN 2723-3863 E-ISSN 2723-3871

Anjum, Asraar and Hrairi, Meftah and Aabid, Abdul and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Examining the efficacy of finite element method for detecting damage in aluminium structures. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 110-121. ISSN 2289-7895

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Civil structural health monitoring and machine learning: a comprehensive review. Frattura ed Integrita Strutturale, 18 (69). pp. 43-59. E-ISSN 1971-8993

Anjum, Asraar and Hrairi, Meftah and Shaikh, Abdul Aabid and Mohd Yatim, Norfazrina Hayati and Ali, Maisarah (2024) Damage detection in concrete structures with impedance data and machine learning. Bulletin of the Polish Academy of Sciences: Technical Sciences, 72 (3). pp. 1-11. ISSN 0239-7528 E-ISSN 2300-1917

Anuar, Farhana Nur Danisyah Mohd Anuar and Ghasi Mahaboobali, Fharukh Ahmed and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2024) Effect of cavity geometry and location on base pressure in a suddenly expanded flow at mach 2.0 for area ratio 3.24. Journal of Advanced Research in Applied Mechanics, 117 (1). pp. 1-21. E-ISSN 2289-7895

Azami, Muhammad Hanafi (2024) Euclid: misi merungkai misteri besar alam semesta. Risalah Falak. p. 14.

Baghdadi, Faical and Hrairi, Meftah and Asrar, Waqar (2024) A numerical comparison of 2D and 3D CFD modelling for contraction and expansion geometries with an emphasis on solid particles erosion. CFD Letters, 16 (6). pp. 157-168. E-ISSN 2180 - 1363

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Chaudhari, Pavan Bhaskar and Arakerimath, Rachayya and Pathan, Khizar Ahmed and Khan, Sher Afghan (2024) Comparative experimental analysis and performance optimization of single-cylinder DI and HCCI engine with series catalytic converters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 121 (1). pp. 173-187. ISSN 2289-7879

Dhairiyasamy, Ratchagaraja and Rajendran, Silambarasan and Khan, Sher Afghan and Alahmadi, Ahmad Aziz and Alwetaishi, Mamdooh and A˘gbulut, Ümit (2024) Enhancing thermal efficiency in flat plate solar collectors through internal barrier optimization. Thermal Science and Engineering Progress, 54. pp. 1-15. ISSN N/A E-ISSN 2451-9049

Ellappan, Sivakumar and Rajendran, Silambarasan and Dhairiyasamy, Ratchagaraja and Al-Mdallal, Qasem M and Khan, Sher Afghan and Asif, Mohammad and Dixit, Saurav and Ağbulut, Ümit (2024) Experimental investigation of ternary blends on performance, and emission behaviors of a modified low-heat rejection CI engine. Case Studies in Thermal Engineering, 60. pp. 1-11. E-ISSN 2214-157X

Elumalai, R. and Sumathy, S. and K, Ravi and Akhtar, Mohammad Nishat and Elumalai, P.V. and Khan, Sher Afghan and Gupta, M. Satayanarayana and Asif, Mohammad (2024) Experimental investigation and gray relational optimization of engine parameters to improve the output characteristics of an ammonia biodiesel-powered dual-fuel combustion engine. Case Studies in Thermal Engineering, 56. pp. 1-20. ISSN 2214-157X

Fayaz, Hussain and Ramesh, S. and Afzal, Asif and Agbulut, Ümit and Khan, Sher Afghan and Asif, Mohammed and Raja, Vijayanandh and Linul, Emanoil (2024) Investigation of numerical phase transition of nano-enhanced SiC/paraffin wax PCM in solar-assisted water desalination system. Thermal Science and Engineering Progress, 50. pp. 1-15. E-ISSN 2451-9049

Ganat, Tarek A. and Hrairi, Meftah and Badawy, Amr and Khosravi, Vahid and Abdalla, Mohammed (2024) Advancing sandstone reservoir compressibility prediction: A correlation-driven methodology. Petroleum Research, 9 (2). pp. 273-279. ISSN 2096-2495 E-ISSN 2524-1729

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar (2024) Numerical prediction of trailing edge noise at low Reynolds number with modified trailing edges of a NACA 0015 airfoil. CFD Letters, 16 (8). pp. 64-94. ISSN 2180-1363 E-ISSN 2180-1363

Hassan, Mohamed Ibren and Asrar, Waqar and Ismail, Muhammad Ariffuddin and Andan, Amelda Dianne (2024) Experimental investigation on the aerodynamic parameters of trailing edge wake generators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 1-16. ISSN 2289-7879

Idres, Moumen Mohammed Mahmoud (2024) Assessment of the range of an electric aircraft. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (2). pp. 155-170. E-ISSN 2462-1943

Idros, Syed and Abdullah, Muhammad and Toha @ Tohara, Siti Fauziah and Md Said, Mohamad Syazarudin (2024) Modelling of vehicle longitudinal dynamics for speed control. Journal of Advanced Research in Applied Mechanics, 123 (1). pp. 56-74. E-ISSN 2289-7895

Jain, Yogesh Kumar and Kurkute, Vijay and Deshmukh, Sagar Mane and Pathan, Khizar Ahmed and Attar, Ajaj Rashid and Khan, Sher Afghan (2024) The influence of plate fin heat sink orientation under natural convection on thermal performance: an experimental and numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 118-129. ISSN 2289-7879

Jilte, Ravindra and Afzal, Asif and Khan, Sher Afghan and Asif, Mohammad and Venkatesan, Elumalai Perumal and Munimathan, Arunkumar (2024) Cooling performance of a Li-ion cylindrical battery pack with liquid circulating pipes embedded in phase change material. Journal of Energy Storage, 87 (111335). pp. 1-15. ISSN 2352-152X

Kale, Dipak and Arakerimath, Rachayya and Pathan, Khizar Ahmed and Khan, Sher Afghan (2024) Investigation on Water Erosion Behavior of Ti-based Metal Matrix Composite: Experimental Approach. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 122 (2). pp. 71-82. ISSN 2289-7879

Khan, Ambareen and Aabid, Abdul and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Baig, Muneer (2024) Comprehensive CFD analysis of base pressure control using quarter ribs in sudden expansion duct at sonic Mach numbers. International Journal of Thermofluids, 24. pp. 1-17. ISSN 2666-2027

Khan, Ambareen and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Aabid, Abdul and Baig, Muneer (2024) Base pressure control with semi-circular ribs at critical mach number. Fluid Dynamics & Materials Processing, 20 (9). pp. 2007-2028. ISSN 1555-2578

Khan, Ambareen and Khan, Sher Afghan and Raja, Vijayanandh and Aabid, Abdul and Baig, Muneer (2024) Effect of ribs in a suddenly expanded flow at sonic Mach number. Heliyon, 10. pp. 1-17. ISSN 2405-8440

Mohamad Anuar, Mai Nurul Fareesya and Sujana, Mohammad Juani and Ismail, Izham Izzat and Azami, Muhammad Hanafi (2024) Experimental evaluation on the effects of energetic additives in the hybrid rocket fuel. Journal of Transport System Engineering, 11 (1). pp. 13-21. E-ISSN 2289–9790

Mohd Noor, Nurul Muthmainnah and Ahmad Razali, Zarith Sofia and Mahmod@Wahab, Rohidatun and Ahmad, Salmiah (2024) Designing an autonomous mobile robot based on rocker-bogie concept for terrain purposes. Malaysian Journal of Science and Advanced Technology, 4 (2). pp. 84-91. E-ISSN 2785-8901

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Comprehensive analysis of geometric hole designs and configurations in film cooling for gas turbine engines: a critical review. Journal of Aeronautics, Astronautics and Aviation, 56. pp. 187-218. ISSN 1990-7710

Mohd Zulkeple, Muhammad Fitri and Abu Talib, Abd Rahim and Harmin, Mohammad Yazdi and Saadon, Syamimi and Azami, Muhammad Hanafi and Yusaf, Talal (2024) Numerical investigation of heat transfer enhancement via dimpled target surface configuration and jet arrangement in impingement cooling. Journal of Aeronautics, Astronautics and Aviation, 56 (1S). pp. 93-106. ISSN 1990-7710

Pakry, Nur Amalina and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2024) Effect of material properties on the behaviour of cross-ply laminated cylindrical shells under thermo-mechanical load. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 51-65. E-ISSN 2289-7895

Pebrianti, Dwi and Ahmad, Denis and Bayuaji, Luhur and Wijayanti, Linda and Mulyadi, Melisa (2024) Using content-based filtering and apriori for recommendation systems in a smart shopping system. Indonesian Journal of Computing, Engineering and Design, 6 (1). pp. 58-70. ISSN 2656-1972 E-ISSN 2656-8179

Pebrianti, Dwi and Kurniawan, Haris and Bayuaji, Luhur and Rusdah, Rusdah (2024) XgBoost hyper-parameter tuning using Particle Swarm Optimization for stock price forecasting. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 9 (4). pp. 1179-1195. ISSN 2338-3070 E-ISSN 2338-3062

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue and methyl orange dye by using the core-shell structure of Fe3O4@ZnS nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 42-55. ISSN 2756-8210

Pirjade, Benazir S and Jadhav, Shivaji Dinkar and Shaikh, Israr Ahmad and Khan, Sher Afghan (2024) Photocatalytic degradation of methylene blue dye by using different nanoparticles. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 1-17. ISSN 2756-8210

Pratama, Maulana Krisna Bayu and Dewi, Yulia Puspita and Kusumawati, Tri Ika Jaya and Pebrianti, Dwi (2024) Designing a laboratory assistant attendance system using Radio Frequency Identification (RFID) technology based on IOT. Jurnal Inovasi danTeknologi Pembelajaran, 11 (1). pp. 43-54. ISSN 2406-8780 E-ISSN 2654-7953

Quadros, Jaimon D. and Khan, Sher Afghan and Mohin, Ma and Mogul, Yakub I. and Baig, Muneer and Aabid, Abdul (2024) Heat transfer of Ca (NO3)2‑KNO3 molten salt mixtures for austempering and martempering processes of steels. ACS Omega, 9 (15). pp. 17266-17275. E-ISSN 2470-1343

Quadros, Jaimon Dennis and Mogul, Yakub Iqbal and Ağbulut, Ümit and Gürel, Ali Etem and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Jilte, Ravindra D. and Asif, Mohammad (2024) Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms. International Journal of Thermal Sciences, 197. pp. 1-12. ISSN 1290-0729 E-ISSN 1778-4166

Rahman, Mohammed Ataur and Ihsan, Sany Izan (2024) Electricity generation of electric coaster in trapping solar heat. International Journal on Integration of Knowledge, 1 (2). pp. 1-14. E-ISSN 2990-9392

Razali, Muhammad Hanif and Md Nor, Khairul Affendy and Mohammed Sapardi, Mohd Azan and Nordin, Nor Hidayati Diyana and Kamaru Zaman, Fadhlan Hafizhelmi and Zabidi, Azlee (2024) Parametric optimization for power generation of flow induced vibration energy harvester. CFD Letters, 17 (3). pp. 109-123. E-ISSN 2180-1363

Ridwan, Ridwan and Khan, Sher Afghan and Mohamed Ali, Jaffar Syed and Mohammed Sapardi, Mohd Azan (2024) Influence of cavity on base pressure manipulation in suddenly expanded flow from converging diverging nozzle for area ratio 5.29. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 32-49. E-ISSN 2289-7879

Rossiter, John Anthony and Abdullah, Muhammad and Aftab, Muhammad Saleheen (2024) Improving the feedforward component for recent variants of predictive functional control. Processes, 12 (1). pp. 1-15. E-ISSN 2227-9717

Roy, Roji George and Agbulut, Ümit and Koshy, Chacko Preno and Alex, Y. and Sailesh, K.S. and Khan, Sher Afghan and Jilte, Ravindra and Linul, Emanoil and Asif, Mohammad (2024) Impact of synthesizing surfactant-modified catalytic ceria nanoparticles on the performance and environmental behaviors of coconut oil/diesel-fueled CI engine: an optimization attempt. Energy, 295. pp. 1-21. ISSN 0360-5442 E-ISSN 1873-6785

Sambath, Yaknesh , and Natarajan, Rajamurugu and Babu, Prakash K and Raju, K. Ramachandra and Alahmadi, Ahmad Aziz and Alwetaishi, Mamdooh and Khan, Sher Afghan (2024) Comparative analysis of predictive modeling techniques for mechanical properties in dissimilar friction stir welding of AA6061 and AZ31B. Journal of Materials Engineering and Performance, 33 (24). pp. 1-17. ISSN 10599495 E-ISSN 15441024

Satriawan, Sukma and Setiawan, Agus and Pebrianti, Dwi and Md. Zain, Zainah (2024) The effect of pin length and compressive force in double side friction stir welding on bending strength of AA1100. Journal of Evrimata: Mechanical Engineering, 1 (1). pp. 9-13. E-ISSN XXXX-XXXX

Sethuraman, Vigneshvaran and Rajendran, Parvathy and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2024) Control of nozzle flow using rectangular ribs at sonic and supersonic mach numbers. Fluid Dynamics & Materials Processing, 20 (8). pp. 1847-1866. ISSN 1555-256X E-ISSN 1555-2578

Shabbir Ahmed, Omar and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2024) Parametric analysis of critical buckling in composite laminate structures under mechanical and thermal loads: a finite element and machine learning approach. Materials, 17 (17). pp. 1-27. E-ISSN 1996-1944

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2024) Optimization of damage repair with piezoelectric actuators using the Taguchi method. Frattura ed Integrita Strutturale, 18 (67). pp. 137-152. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Hrairi, Meftah and Raheman, Md Abdul and Ibrahim, Yasser E. (2024) Enhancing aircraft crack repair efficiency through novel optimization of piezoelectric actuator parameters: a design of experiments and adaptive neuro-fuzzy inference system approach. Heliyon, 10 (11). pp. 1-27. ISSN 2405-8440 E-ISSN 2405-8440

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2024) Influence of sweep angle on the surface pressure of delta wing along pivot positions at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 172-191. ISSN 2289-7879

Sheikh, Fahim Rahim and Deshmukh, Suresh Pandurang and Ardhapurkar, Purushottam and Pathan, Khizar Ahmed and Shaikh, Sohel Khalil and Khan, Sher Afghan (2024) Modeling and experimental validation of NePCM-Nanofluid-Based PVT system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 122 (1). pp. 205-222. ISSN 2289-7879

Shetty, Shamitha and Crasta, Asha and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2024) Effect of sweptback angle of a delta wing on surface pressure distribution at supersonic Mach numbers. Fluid Dynamics and Material Processing, 20 (10). pp. 2353-2376. ISSN 1555-256X E-ISSN 1555-2578

Srikrishnan, Guruprasad and Shenbagamuthuraman, V. and Ağbulut, Ümit and Mishra, Ishani and Jain, Jesika and Balusamy, Saravanan and Chinnadurai, Karthick and Chatterjee, Dipankar and Shankar, E. and Shaik, Saboor and Hoang, Anh Tuan and Saleel, C Ahamed and Khan, Sher Afghan and Kasianantham, Nanthagopal (2024) Alcohol fuels in SI engines: a comprehensive state‑of‑the‑art review on combustion, performance, and environmental impacts. Journal of Thermal Analysis and Calorimetry, 154. pp. 1-63. ISSN 1388-6150 E-ISSN 1588-2926

Syed Abdullah, Syed Idros and Zainuddin, Mohamed Al-Sideque and Abdullah, Muhammad and Tofrowaih, Khairul Amri (2024) Analysis of a simplified predictive function control formulation using first order transfer function for adaptive cruise control. International Journal Of Automotive And Mechanical Engineering, 21 (3). pp. 11641-11651. ISSN 2229-8649 E-ISSN 2180-1606

Syed Mohamed Ali, Jaffar and M.J.A ., Muhammad Nazri (2024) Optimization of composite fuselage frame layup for energy absorption under crash loading. Journal of Advanced Research in Applied Mechanics, 122 (1). pp. 111-129. E-ISSN 2289-7895

Syed Mohamed Ali, Jaffar and Mad Nasib, Wan Muzamir and Che Basir, Haqmal Aqif (2024) Educational software for stress analysis of open thin-walled structures. Journal of Advanced Research in Applied Mechanics, 126 (1). pp. 149-164. E-ISSN 2289-7895

Tarique, Altaf Hasan and Khan, Sher Afghan and Khalid, Farrukh and Azami, Muhammad Hanafi (2024) Development and assessment of a thermochemical cycle and SOFC-based hydrogen energy systems as a potential energy solution for the peak demand in a sustainable community. International Journal of Hydrogen Energy, 51 (Part D). pp. 1382-1389. ISSN 0360-3199

Tripathi, Abhishek Kumar and Mangalpady, Aruna and Elumalai, P.V. and Karthik, Krishnasamy and Khan, Sher Afghan and Asif, Mohammad and Rao, Koppula Srinivas (2024) Advancing solar PV panel power prediction: A comparative machine learning approach in fluctuating environmental conditions. Case Studies in Thermal Engineering, 59. pp. 1-15. ISSN 2214-157X

Venkatesan, Elumalai Perumal and Krishnaiah, Ravi and Prasad, Kalapala and Medapati, Sreenivasa Reddy and Sree, Sripada Rama and Asif, Mohammad and Khan, Sher Afghan and Linul, Emanoil (2024) Compatibility effects of waste cooking oil biodiesel blend on fuel system elastomers in compression ignition engines. ACS Omega, 9 (6). pp. 6709-6718. ISSN 2470-1343

Warimani, Mahammadsalman and Bellary, Sayed Ahmed Imran and Azami, Muhammad Hanafi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Veerasigamani, Manieniyan (2024) Effect of multi-cycle combustion on nox emission formation of hydrogen fuel in pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 120 (1). pp. 217-233. ISSN 2289-7879

Warimani, Mahammadsalman and Mahaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan and Muthuswamy, Sonachalam and Bellary, Sayed Ahmed Imran (2024) Numerical investigation of NOx reduction in a hydrogen-fueled pulse detonation engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (2). pp. 106-117. E-ISSN 2289-7879

Yaknesh, Sambath and Rajamurugu, Natarajan and Babu, Prakash K. and Subramaniyan, Saravanakumar and Khan, Sher Afghan and Saleel, C. Ahamed and Alam, Mohammad Nur‑E and Soudagar, Manzoore Elahi Mohammad (2024) A technical perspective on integrating artificial intelligence to solid‑state welding. International Journal of Advanced Manufacturing Technology, 154 (13524). pp. 1-26. ISSN 0268-3768 E-ISSN 1433-3015

Yaknesh, Sambath and Rajamurugu, Natarajan and Babu, Prakash K. and Subramaniyan, Saravanakumar and Khan, Sher Afghan and Saleel, C. Ahamed and Nur‑E‑Alam, Mohammad and Soudagar, Manzoore Elahi Mohammad (2024) A technical perspective on integrating artificial intelligence to solid‑state welding. International Journal of Advanced Manufacturing Technology, 132 (9-10). pp. 4223-4248. ISSN 0268-3768 E-ISSN 1433-3015

Zuraidi, Nur Husnina Muhamad and Khan, Sher Afghan and Mohammed Sapardi, Mohd Azan and Dixit, Saurav (2024) Passive control of base pressure and the flow development in a duct with sudden expansion at sonic Mach number. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 123 (2). pp. 111-139. E-ISSN 2289-7879

Book Chapter

Fiqri, Muhammad Ikhwan and Ahmed Pathan, Khizer and Khan, Sher Afghan (2024) Control of suddenly expanded flow with cavity at sonic Mach number. In: Advances in Heat Transfer and Fluid Dynamics. Select Proceedings of AHTFD 2022 . Springer, pp. 1-425. ISBN 978-981-99-7212-8

Proceeding Paper

Aryo Putro Satriyono, Raden Danang and Pebrianti, Dwi and Asmara Sakti, Arga Seta (2024) Micro small medium enterprises intention to implement circular economy in Solo, Indonesia. In: The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023), 7-8 December 2023, Surakarta, Indonesia.

Bayuaji, Luhur and Kusnadi, Kusnadi and Amzah, Mochamad Yamin and Pebrianti, Dwi (2024) Optimization of feature selection in Support Vector Machines (SVM) using recursive feature elimination (RFE) and particle swarm optimization (PSO) for heart disease detection. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Faris Jamil, Muhammad Irfan and Samad, Rosdiyana and Pebrianti, Dwi and Mustafa, Mahfuzah and Abdullah, Nor Rul Hasma and Noordin, Nurul Hazlina (2024) A comparative study of deep learning models for the classification of knee osteoarthritis in X-ray images. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Ismail, Muhammad Syahmie and Samad, Rosdiyana and Pebrianti, Dwi and Mustafa, Mahfuzah and Abdullah, Nor Rul Hasma (2024) Comparative analysis of deep learning models for sheep detection in aerial imagery. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Pebrianti, Dwi and Mohammed Khalani, Muhammad Zulhakim and Rusdah, Rusdah and Bayuaji, Luhur (2024) Predictive maintenance in aerospace industry using Convolutional Neural Network. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.

Zakaria, Mohd Sharif and Abas, Mohammad Fadhil and Dg Jamil, Fatimah and Mohd Saad, Norhafidzah and Hashim, Addie Irawan and Pebrianti, Dwi (2024) Detecting problematic vibration on unmanned aerial vehicles via genetic-algorithm methods. In: 20th International Colloquium on Signal Processing & Its Applications (CSPA 2024), 1st - 2nd March 2024, Langkawi, Malaysia.