Items where Author is "Sutjipto, Agus Geter Edy"
 | Up a level |
Article
Hafizuddin, Muhammad and Shukor, Muhammad Danish and Mohd Razib, Mohd Asyraf and Engliman, Nurul Sakinah and Malek, Mohd Firdaus and Mohamed, Ruziana and Mamat, Mohamad Hafiz and Sutjipto, Agus Geter Edy and Kamarzaman, Azlin Haezrina and Mohd Yusoff, Marmeezee (2022) Development of data acquisition system for mobile ultraviolet (uv) monitoring device. Journal Information System and Technology Management (JISTM), 7 (27). pp. 280-288.
Ani, Mohd Hanafi and Zulkeflee, Muhammad Zakhuan and Kaderi, Akbar and Sutjipto, Agus Geter Edy and Salim, Nurjannah (2022) Multiwall carbon nanotubes based triboelectric nanogenerators. Materials Science Forum, 1056. pp. 33-38. ISSN 1662-9752
Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi (2012) Solid state, dry zinc/MCM-41/air cell as relative humidity sensor. Journal of Membrane Science, 415-16. pp. 237-241. ISSN 0376-7388
Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi (2012) Gel-like properties of MCM-41 material and its transformation to MCM-50 in a caustic alkaline surround. Materials Research Bulletin, 47 (3). pp. 732-736. ISSN 0025-5408
Al-Khateeb, Khalid A. Saeed and Mustafa, Ammar A. and Ismail, Ahmad Faris and Sutjipto, Agus Geter Edy (2012) Use of porous alumina bioceramic to increase implant osseointegration to surrounding bone. Advanced Materials Research, 445. pp. 554-559. ISSN 1022-6680
Sutjipto, Agus Geter Edy and , Afzeri and Shafie, Amir Akramin (2011) Recent nanofabrication of silicon dioxide on silicon wafer using AFM operated at low temperature. Applied Mechanics and Materials, 84-85. pp. 317-320. ISSN 1660-9336
Saputra, Hens and Othman, Raihan and Ani, Mohd Hanafi and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) High energy density zinc-air microbattery utilising inorganic MCM-41 membrane. Materials Research Innovations, 15 (1). pp. 114-117. ISSN 1433-075X
A. R. , Fatimah Azreen and Sutjipto, Agus Geter Edy and Adesta, Erry Yulian Triblas (2011) Fabrication of CuSiC composite by powder metallurgy route. Advanced Materials Research, 264/65. pp. 748-753. ISSN 1662-8985
Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2011) Microstructure and electrical properties of AZO films prepared by RF magnetron sputtering. Advanced Materials Research, 264-65. pp. 754-759. ISSN 1662-8985
Afzeri, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2011) Virtual simulation and remote desktop interface for CNC milling operation. Advanced Materials Research, 264/65. pp. 1643-1647. ISSN 1662-8985
Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) MCM-41 as a new separator material for electrochemical cell: application in zinc–air system. Journal of Membrane Science, 367 (1-2). pp. 152-157. ISSN 0376-7388
Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Sutjipto, Agus Geter Edy (2011) Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 456-460. ISSN 1991-8178
Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and ., Afzeri and Adesta, Erry Yulian Triblas (2010) Modeling electric field distribution on insulator under electron bombardment in vacuum. International Journal of Aerospace and Mechanical Engineering, 4 (4). pp. 192-195. ISSN 2010-3794 (O), 2010-3786 (P)
Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2009) Discharge, microstructural and mechanical properties of ZrO2 addition on MgO for plasma display panel materials. Materials Research Innovations, 13 (3). pp. 149-152. ISSN 1433-075X
, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2009) Remote operation of CNC milling through virtual simulation and remote dekstop interface. World Academy of Science, Engineering and Technology, 53. pp. 64-67. ISSN 1307-6884
Yahya, Roslan and Sutjipto, Agus Geter Edy and Abdullah , Jaafar and M. Hassan, Nor Pa'iza (2009) Neutron transmutation doped of silicon under Cf-252 isotopic neutron bombardment. Jurnal Sains Nuklear Malaysia, 21 (2). pp. 50-55. ISSN 2232-0946
Muhida, Riza and Sutjipto, Agus Geter Edy and ., Afzeri and Toyama, T. and Okamoto, Hiroaki (2009) Relationship between average slope of textured substrate and poly-Si thin film solar cells performance. Materials Research Innovations, 13 (3). pp. 246-248. ISSN 1433-075X
Muhida, Riza and Ali, Maisarah and Jahn Kassim, Puteri Shireen and Abu Eusuf, Muhammad and Sutjipto, Agus Geter Edy and ., Afzeri (2009) A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya. World Academy of Science, Engineering and Technology, 53. pp. 694-698. ISSN 1307-6884
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785
Turnad L., Ginta and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785
Sutjipto, Agus Geter Edy and Takata, Masasuke (2007) The use of SEM to investigate the effect of an electron beam on the optically-visible flashover treeing of MgO ceramic. Journal of Materials Science, 42. pp. 6036-6040. ISSN 1573-4803 (O), 0022-2461 (P)
Sutjipto, Agus Geter Edy (2007) Surface breakdown property of SiO2 added MgO under electron bombardment in vacuum: a promising materials for spacecraft and space station. Canadian Journal of Pure and Applied Sciences, 1 (1). pp. 73-77. ISSN 1715-9997
Sutjipto, Agus Geter Edy (2007) The effect of CaO addition on the microstructural, mechanical and dielectric properties of pure MgO ceramic. Key Engineering Materials, 345-46. pp. 1609-1612. ISSN 1013-9826
Haruman, E. and Widhi, K. and Sutjipto, Agus Geter Edy and Mridha, Shahjahan and Sun, Y. (2006) Structural and wear and characteristic of low temperature nitrided stainless steel. Jurnal Teknologi, XX (3). pp. 209-214. ISSN 2180–3722 (O), 0127–9696 (P)
Book
Sutjipto, Agus Geter Edy and Purwanto, Hadi (2011) Introduction to probability safety assessment of nuclear power plant. IIUM Press, Kuala Lumpur. ISBN 9789674180546
Book Chapter
Muhida, R. and Sutjipto, Agus Geter Edy and Toyama, T. and Okamoto, H. (2014) Electrical conductivities of poly-si thin film solar cells deposited on textured substrate. In: Advancements in computer and communications engineering. IIUM Press, Kuala Lumpur, pp. 151-159. ISBN 9789674182830
Sutjipto, Agus Geter Edy and Mohd Fuad, Nurul Hajar and -, Farah Diana (2011) Electrical property of ITO thin film deposited by Rf Magnetron Sputtering. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 49-54. ISBN 9789674181680
Sutjipto, Agus Geter Edy and Muhida, Riza (2011) Green nanotechnology using SEM and AFM. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 147-153. ISBN 9789674181642
Sutjipto, Agus Geter Edy and Yahya, Roslan (2011) Microstructure and mechanical properties of neutron transmutation doped silicon under Cf-252 Neutron Bombardment. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 16-26. ISBN 9789674181642
Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Piezoelectric effect of zinc oxide thin film as source of energy for sensor applications. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 135-140. ISBN 9789674181642
Afzeri, Afzeri and Sutjipto, Agus Geter Edy and Nurul Amin, A.K.M (2011) Pin type reconfigurable clamping ability evaluation for setup-free technology. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 569-575. ISBN 9789670225685
Sutjipto, Agus Geter Edy and Kaderi, Akbar (2011) Sample preparation on ceramics composite for cutting tools in high speed machining. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 61-79. ISBN 9789674180232
Sopyan, Iis and Haruman, Esa and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) Selection of materials and design specification for hip oint prosthesis. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, International Islamic University Malaysia, pp. 386-393. ISBN 9789670225685
Sutjipto, Agus Geter Edy and Budah@Udah, Muhyiddin (2011) Study on metal removing from alumina ceramics. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 137-145. ISBN 9789674181680
Sutjipto, Agus Geter Edy and Abdul Gafar, Liyana and Roselan, Nor Azyati Syazwina (2011) Study on zinc oxide crystal growth. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 141-146. ISBN 9789674181642
Sutjipto, Agus Geter Edy and Shaha, Sugrib Kumar (2011) Thin film of indium tin oxide and its deposition technology deposition. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 180-185. ISBN 9789674181680
Muhida, Riza and Martono, Wahyudi and Albagul, Abdulgani and Sutjipto, Agus Geter Edy and ., Afzeri and Haruman, Esa and Sopyan, Iis (2011) A maximum power point tracking for Photovoltaic system using temperature compensator method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 187-193. ISBN 9789670225685
Sutjipto, Agus Geter Edy (2011) The possibility of utilizing scanning electron microscope for materials characterization. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 127-134. ISBN 9789674181642
Sutjipto, Agus Geter Edy and Afzeri, Afzeri and Muhida, Riza and Sopyan, Iis and Haruman, Esa (2011) The use of scanning electron microscope in evaluating insulation property. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 180-186. ISBN 9789670225685
Proceeding Paper
Zakaria, Muhammad Izwan and Mohd Zaki, Hafizah Hanim and Abdul Hamid, Abd. Malek and Sutjipto, Agus Geter Edy and Ani, Mohd. Hanafi (2022) Assessment of corrosion on buried metallic pipeline induced by AC interference below high transmission line. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17th November 2021, UKM and NACE International Founding Malaysia Section.
Ani, Mohd Hanafi and Purwanto, Hadi and Musa, Mukhtaruddin and Illias, Suhaimi and Kaderi, Akbar and Salim, Nurjannah and Abd Rahim, Mohd Hasbi and Sutjipto, Agus Geter Edy (2022) Electrochemical monitoring of oxygen potential on Fe-Cr alloy surface during high temperature oxidation in dry and humid conditions. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.
Sutjipto, Agus Geter Edy and Hisyam, Anwaruddin and Salim, Nurjannah and Ab Rahim, Mohd Hasbi and Legowo, Ari and Ani, Mohd Hanafi (2019) Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26 Mar - 10 Apr 2019, Dubai, United Arab Emirates.
Sutjipto, Agus Geter Edy and Mazwir, M. H. and Yee, H. L. and Misskon, S. R. and Shaitir, A. G.M. and Jusoh, Mohamad Ashry and Othman, Raihan (2018) Effect of compaction pressure of green body and heating current on photoluminescence property of ZnO crystal grown by electric current heating method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.
Ahmad Razi, Fatimah Azreen and Sutjipto, Agus Geter Edy and Mohamad, Souad A. (2012) Development of Cu-SiC composite for electrical discharge machining electrode using powder metallurgy technique. In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2012, 3-5 July 2012, Kuala Lumpur.
Al-Khateeb, Khalid A. Saeed and Mustafa, Ammar A. and Ismail, Ahmad Faris and Sutjipto, Agus Geter Edy (2011) Investigation of a new porous glass ceramic for potential bone implant. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.
Hens, Saputra and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi and Othman, Raihan (2010) Preparation and characterization of inorganic MCM-41 membrane for zinc-air microbattery. In: 3rd International Conference on Functional Materials and Devices (ICFMD 2010), 13-17 June 2010, Kuala Terengganu, Malaysia. (Unpublished)
Meskon, Shahrul Razi and Sutjipto, Agus Geter Edy and Ani, Mohd Hanafi and Othman, Raihan (2010) RF magnetron sputtered YSZ thin film: Fabrication and characterizations. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)
Mohamad Koya, Muhamad Aslam and Mohamad Ibrahim , Azhar and Akmeliawati, Rini and Sutjipto, Agus Geter Edy and Faris, Waleed Fekry (2010) Artificial nose for alcohol detection. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Sutjipto, Agus Geter Edy and -, Jufriadi and Muhida, Riza and Othman, Raihan (2010) Green technology of energy-efficient materials up to 70% for plasma display panel. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Sutjipto, Agus Geter Edy and Bakri, Jufriadi and Muhida, Riza and Othman, Raihan (2010) Novel AZO thin film for display and Photovoltaic application. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Sutjipto, Agus Geter Edy and Yahya, Ruslan and Muhida, Riza (2010) Novel nuclear technology for controlled production of n-type semiconductor. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.
Sutjipto, Agus Geter Edy (2010) Recent finding on premature failure of commercial electric motor bearings. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Saputra, Hens and Assayidatul Laila, Nor Hairin and Sutjipto, Agus Geter Edy and Muhida, Riza and Mohd Hanafi, Ani and Othman, Raihan (2010) A breathing microbattery: Zn/MCM-41/O2 system. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.
Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and Adesta, Erry Yulian Triblas (2009) Modeling electric field distribution on insulator under electron bombardment in vacuum. In: Proceedings of World Academy of Science, Engineering and Technology.
Sutjipto, Agus Geter Edy and -, Jufriadi and Muhida, Riza and Takata, Masasuke (2008) Novel characterization technique by using an SEM. In: XXIII-rd Int. Symp. on Discharges and Electrical Insulation in Vacuum (ISDEIV 2008), 15 - 19 September 2008, Bucharest, Romania.
Sutjipto, Agus Geter Edy and -, Afzeri and Muhida, Riza and Mridha, Shahjahan (2007) Novel nanofabrication process of oxide patterns using AFM in low operating temperature: a promising lithographic tool for future molecular electronics. In: International Conference on Electrical Engineering and Informatics Institut Teknologi , 17-19 June 2007, Bandung, Indonesia .
Muhida, Riza and Sutjipto, Agus Geter Edy and Matsui, T. and Toyama, T. and Okamoto, H. (2006) Measuring the electronic properties of poly-si thin film solar cells deposited on textured substrate. In: 8th International Conference on Properties and Applications of Dielectric Materials, 26 - 30 June 2006, Bali, Indonesia.
Sutjipto, Agus Geter Edy and Muhida, Riza and Takata, Masasuke (2006) An SEM flashover: technique to characterize wide band gap insulators. In: 8th International Conference on Properties and Applications of Dielectric Materials, 26 - 30 June 2006, Bali, Indonesia.
Sutjipto, Agus Geter Edy (2004) The strength of SiO2 added MgO ceramics to withstand flashover-treeing appearance under electron bombardment in vacuum. In: 3rd International Conference on Electrical and Computer Engineering (ICECE 2004), 28 - 30 December 2004, Dhaka, Bangladesh.
Monograph
Purwanto, Hadi and Sutjipto, Agus Geter Edy (2012) Probability safety assessment for nuclear power plant. Research Report. s.n, Kuala Lumpur. (Unpublished)