Items where Author is "Rahman, Md Mustafizur"

Article

Maleque, Md. Abdul and Md Idriss, Ahmed Nazrin and Naping, Rosmia and Rahman, Md Mustafizur and Efeoglu, Ihsan (2024) The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 33-42. ISSN 2289 – 7895

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Safiei, Wahaizad and Kadirgama, Kumaran and Maleque, Md. Abdul (2022) Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Urmi, Wajiha Tasnim and A.S, Shafiqah and Rahman, Md Mustafizur and Maleque, Md. Abdul and Kadirgama, Kumaran (2021) Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 56-66. E-ISSN 2289-7879

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2018) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation. ISSN 1757-2754 E-ISSN 1757-2762 (In Press)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Bello, Kamillo and ,, Mohd Azwan and Rahman, Md Mustafizur (2018) Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17. pp. 15-28. E-ISSN 2289-7232

Proceeding Paper

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Safiei, Wahaizad and Rahman, Md Mustafizur and Musfirah, A. H. and Maleque, Md Abdul and Singh, Ramvir (2020) Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019), 30th-31st July 2019, Kuantan, Pahang.

Zetty Akhta, A. M. and Rahman, Md Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul (2020) Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. In: "Energy Security and Chemical Engineering Congress 2019, ESChE 2019", 17 - 19 July 2019, Parkroyal Resort Penang.

Monograph

Maleque, Md. Abdul and Wan Yusoff, Wan Ahmad Yusmawiza and Samat, Noorasikin and Ali, Mohammad Yeakub and Rahman, Md Mustafizur and Adetayo A., Adebisi (2017) Prototype development of light weight aluminium matrix composite automotive brake rotor. Project Report. UNSPECIFIED. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)