Items where Author is "Muhamad Khairussaleh, Nor Khairusshima"

Dahnel, Aishah Najiah and Abdul Ghani, Muhamad Ali and Raof, Natasha A. and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Analysis of defects on machined surfaces of aluminum alloy (Al 7075) using imaging and topographical techniques. International Journal of Metrology and Quality Engineering (IJMQE), 13. pp. 1-8. ISSN 2107-6839 E-ISSN 2107-6847

Gunawan, Teddy Surya and Roshara'madan, Aleeya Nadwa and Muhamad Khairussaleh, Nor Khairusshima and Ismail, Nanang and Yaacob, Mashkuri and A Rahman, Azhar (2022) Development of water pollution monitoring and data logging using ARM Mbed platform. In: 2022 IEEE 8th International Conference on Computing, Engineering and Design (ICCED), 28th - 29th July 2022, Sukabumi, West Java, Indonesia (Virtual Conference).

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2022) Comparison of tool wear mechanisms during drilling of aluminium alloy 7075 in dry and chilled air conditions. Journal of Science and Technology, 14 (1). pp. 67-74. ISSN 2229-8460 E-ISSN 2600-7924

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. In: Third International Conference on Recent Advances in Materials and Manufacturing 2021, 25-26 November 2021, India.

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. Materials Today: Proceedings, 59 (2022). pp. 808-813. ISSN 22147853

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters during milling of carbon fibre reinforced plastics. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters values during milling on carbon fiber reinforced plastic (CFRP) using RSM. Malaysian Tribology Society, 34. pp. 24-38. E-ISSN 2289-7232

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2021) The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry. International Journal of Progressive Sciences and Technologies (IJPSAT), 28 (1). pp. 437-445. ISSN 2509-0119

Syed Shaharuddin, Sharifah Imihezri and Abd Aziz, Nor Busyra and Bacho, Nursyawalina and Muhamad Khairussaleh, Nor Khairusshima and Tumian, Afidalina and Zakaria, Irnie Azlin (2021) Modelling the effect of Dammar additions on the mass loss response of soy wax/ Beeswax/ Dammar blends via response surface methodology. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2020) The effect of cutting parameters on tool wear in drilling aluminium 7075. TEST Engineering & Management, 83 (May-June). pp. 1274-1280. ISSN 0193-4120

Daud @ Ab Aziz, Nur Sofwati and A. Raof, Natasha and Ghani, Abdul Rahman and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2020) Cutting tool performance in turning of AL 7075-t651 aluminium alloy. IIUM Engineering Journal, 21 (2). pp. 177-185. ISSN 1511-788X E-ISSN 2289-7860

Ismail, Azkar Zahidi and Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Mat Hasan, Mohd Raziff and Muhamad Khairussaleh, Nor Khairusshima and Abdul Hamid, Abd. Malek (2018) Kansei evaluation of headscarf (hijab, tudung) designs. Human Factors and Ergonomics Journal, 3 (1). pp. 34-38. E-ISSN 2590-3750

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi and Mohd Ali, Afifah and Muhamad Khairussaleh, Nor Khairusshima (2018) Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills. In: 2018 6th International Conference on Nano and Materials Science (ICNMS 2018), 15th-17th January 2018, Lakeland; United States.

Rashid, Mohammed Abdur N. and Khan, Sher Afghan and Muhamad Khairussaleh, Nor Khairusshima and Sarifuddin, Norshahida (2018) Study on tool wear and tool life during milling JFRP using uncoated carbide cutting tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2930-2934. ISSN 1819-6608

Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.

Syed Shaharuddin, Sharifah Imihezri and Adnan, Muhammad Danial Afiq and Muhamad Khairussaleh, Nor Khairusshima and Mohd Shaffiar, Norhashimah and Buys, Yose Fachmi (2018) Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima and Zakwan, Muhammad Hafiz and Mokhtar, Suhaily and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri (2018) The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima (2017) NOVEL METHOD OF USING CHILLED AIR MACHINING ON UNIDIRECTIONAL CARBON FIBER REINFORCED PLASTIC FOR LONG TERM USAGE OF SOLID CARBIDE CUTTING TOOL. Project Report. UNSPECIFIED. (Unpublished)

Muhamad Khairussaleh, Nor Khairusshima and A.K., Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fiber reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference 2017, 11th-14th December 2017, Chennai; India.

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic under chilled air machining. Advances in Material & Processing Technologies. ISSN 1877-7058 (In Press)

Muhamad Khairussaleh, Nor Khairusshima and Ali Kutty, Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference (AMPT 2016), 8th-11th November 2016, Kuala Lumpur, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Study on tool wear during milling CFRP under dry and chilled air machining. Procedia Engineering, 187. pp. 78-89.

Syed Shaharuddin, Sharifah Imihezri and Tengku Badring Shah, Tengku Nurul Ain and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal modelling and analysis of batik canting design. In: Advances in Materials and Processing Technologies Conference (AMPT 2017), 11th-14th Dec. 2017, Chennai, India.

Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and H. Noor, Azlina and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn curloaded poly(lactic acid) fibers. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah (2016) Study on wear mechanism of solid carbide cutting tool in milling CFRP. Journal of Materials Research, 31 (13). pp. 1893-1899. ISSN 0884-2914

Muhamad Khairussaleh, Nor Khairusshima and A.K.M, Amin and C.H., Che Hassan and A.G. , Jaharah (2015) Tool wear during milling laminated carbon fibre reinforced plastic. Advanced Materials Research, 1115. pp. 96-99. ISSN 1662-8985

Muhamad Khairussaleh, Nor Khairusshima and C.H., Che Hassan and A.G. , Jaharah and A.K.M., Nurul Amin and A.N., Md Idriss (2013) Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic. Wear, 302 (1-2). pp. 1113-1123. ISSN 0043-1648

Muhamad Khairussaleh, Nor Khairusshima and C.H., Che Hassan and A.Ghani, Jaharah and A.K.M., Nurul Amin (2012) Tool wear and surface roughness on milling carbon fiber-reinforced plastic using chilled air. Journal of Asian Scientific Research, 2 (11). pp. 593-598. ISSN 2226-5724 E-ISSN 2223-1331

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah and Amin, A. K. M. Nurul (2012) Tool wear and surface roughness on milling carbon fibre reinforced plastic using chilled air. In: The International Conference on Engineering and Built Environment (ICEBE) 2012, 6th-7th Nov. 2012, Residence Hotel, UNITEN, Bangi, Selangor. (Unpublished)

Muhamad Khairussaleh, Nor Khairusshima and C.H., Che Hassan and A.G. , Jaharah and A.K.M., Nurul Amin (2012) The effect of milling parameters on laminated carbon fibre reinforced plastic (CFRP). Jurnal Teknologi, 59 (2). pp. 203-207. ISSN 0127–9696 E-ISSN 2180–3722