Items where Author is "Karim, A.N. Mustafizul "

Group by: Item Type | No Grouping

Number of items: 95.

Khalili, Amjad and Karim, A.N. Mustafizul and Ismail, Md Yusof and Che Daud, Mohd Radzi (2019) Linkages of QMS and soft EMS: perceptions of operations managers as modelled by SEM. International Journal of Services and Operations Management, 34 (3). pp. 341-360. ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2019) Quality management practices and sustainable performance: examining the role of soft TQM as mediator. International Journal of Industrial and Systems Engineering, 31 (2). pp. 250-277. ISSN 1748-5037 E-ISSN 1748-5045

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Kays, H. M.Emrul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Varela, Leonilde and Putnik, Göran and Machado, Jose (2018) A collaborative multiplicative Holt-Winters forecasting approach with dynamic fuzzy-level component. Applied Sciences (Switzerland), 8 (4). pp. 1-28. ISSN 2076-3417

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and UNSPECIFIED (2018) Quality management system and sustainability: a Malaysian perspective. International Journal of Services and Operations Management, 30 (3). pp. 286-317. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Daud, Mohd Radzi Che (2018) A conceptual framework linking LM, TQM, QMS, and EMS practices with the SP: assessment of responses from managers of some Malaysian industries. International Journal Manufacturing Technology and Management, 32 (3). pp. 191-213. ISSN 1368-2148 E-ISSN 1741-5195

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Perspectives on sustainability integration in the organization's DNA. Noor Publishing. ISBN 9783330852556

Mohiuddin, A. K. M. and Abdul Jabar, Julia and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2017) Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.

Hanash, Ebrahim and Karim, A.N. Mustafizul and Tuan, SaravananTanjong and Mohiuddin, A. K. M. (2017) Throughput enhancement of car exhaust fabrication line by applying MOST. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Integration of lean manufacturing and quality management system through structural equation modeling. International Journal of Productivity and Quality Management, 20 (4). pp. 534-556. ISSN 1744-6482 E-ISSN 1746-6474

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) Relationships of lean, green manufacturing and sustainable performance: Assessing the applicability of the proposed model. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2016) A comparative evaluation of the prevailing models for measuring sustainable performance. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 292-296. ISSN 1819-6608

Karim, A.N. Mustafizul and Tuan, Saravanan Tanjong and Emrul Kays, H.M. (2016) Assembly line productivity improvement as re-engineered by MOST. International Journal of Productivity and Performance Management, 65 (7). pp. 977-994. ISSN 1741-0401

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) A critical assessment of prevailing models for measuring lean manufacturing. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Santos, A. S. and Madureira, A. M. and Varela, M. L. R. and Putnik, G. D. and Emrul Kays, H. M. and Karim, A.N. Mustafizul (2015) Scheduling and batching in multi-site flexible flow shop environments. In: 2015 10th Iberian Conference on Information Systems and Technologies (CISTI), 17th-20th June 2015, Aveiro, Portugal.

Sarker, Ruhul and Essam, Daryl and Kamrul Hasan, S.M. and Karim, A.N. Mustafizul (2015) Managing risk in production scheduling under uncertain disruption. Articial Intelligence for Engineering Design, Analysis and Manufacturing. 1 -11. ISSN 0890-0604

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2015) Understanding contemporary models for organizational sustainability: critical review. International Journal of Services and Operations Management. ISSN 1744-2389 (Unpublished)

Karim, A.N. Mustafizul and Begum, Shahida (2014) Enhanced performance of zinc oxide arrester by simple modification in processing and design. Journal of Material Science & Engineering, 3 (1). pp. 1-6. ISSN 2169-0022

Karim, A.N. Mustafizul and Abd. Rahman, Mohamed and Hj. Yusop, Nornilawati (2014) Mitigation of WIP-related problems at an IC production line through a suitable inspection sampling plan. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Karim, A.N. Mustafizul and Ikram, M and Kays, H. M. Emrul and Abdesselam, M. and Ginta, Turnad Lenggo (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 529. pp. 83-89. ISSN 1022-6680

M., Abdesselam and Karim, A.N. Mustafizul and Kays, H. M. Emrul and Sarker, R. A. (2014) Forecasting demand: development of a fuzzy growth adjusted holt-winters approach. Advanced Materials Research, 529. pp. 402-407. ISSN 1022-6680

Karim, A.N. Mustafizul and Nordin, Anis Nurashikin and Begum, Shahida (2014) Technical and economic feasibility of sensor technology for health/environmental condition monitoring. In: Comprehensive Materials Processing. Elsevier, Amsterdam, pp. 499-514. ISBN 9780080965321

Karim, A.N. Mustafizul and Begum, Shahida and Hashmi, M. S. J. (2013) Role of surface to volume ratio of zinc oxide arrester blocks on the energy absorption capability. In: 4th International Conference on Energy and Environment (ICEE) 2013, 5 - 6 May 2013, College of Information Technology, Universiti Tenaga Nasional, Putrajaya Campus.

Karim, A.N. Mustafizul and Begum, Shahida (2013) Role of surface to volume ratio of zinc oxide arrester on energy absorption capability. In: International Conference on Energy and Environment (ICEE2013), March 5-6, 2013, Putra Jaya, Malaysia. (Unpublished)

Begum, Shahida and Karim, A.N. Mustafizul and Zamani, A. S. M. and Shafii, M. A. (2013) Wall thinning and creep damage analysis in boiler tube and optimization of operating conditions. Journal of Mechatronics, 1. pp. 1-6. ISSN 2326-2885

Begum, Shahida and Karim, A.N. Mustafizul and Nainer, Mohamed Ansari M. and Sevah, Sukhana (2012) Analysis of end crack in boiler tube. Advanced Materials Research, 576. pp. 749-752. ISSN 1662-8985

Karim, A.N. Mustafizul and Hamdan, Hamdan and Alam, Md Zahangir and Iqbal, M. (2012) Economic scenario of cellulase enzyme production using Palm Oil Mill Effluent (POME). Advanced Materials Research, 576. pp. 723-726. ISSN 1662-8985

Iqbal, Mohammad and Purnomo, Muhammad Ridwan Andi and Mohd Imra, Muhammad Ammar and Konneh, Mohamed and Karim, A.N. Mustafizul (2012) The study on production performances of part transporter in flexible manufacturing system by using simulation method. Advanced Materials Research, 576. pp. 714-717. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Karim, A.N. Mustafizul and Jaafar, Abdul Azim and Abdullah, Muhammad Abdullah and Haque, Mahbubul and Ali, Mohammad Yeakub and Amri, Siti Amy Azline (2012) Applying value stream mapping for productivity improvement of a metal stamping industry. Advanced Materials Research, 576. pp. 727-730. ISSN 1022-6680

Haque, Mahbubul and Karim, A.N. Mustafizul and Muqtadir, Afia and Anam, Shahriyar (2012) Dimensions of job satisfaction of library professionals: a qualitative exploration. International Journal of Business snd Social Research (IJBSR), 2 (5). pp. 42-62. ISSN 2164-2559

Begum, Shahida and Karim, A.N. Mustafizul and Shafi, M. A. (2012) Investigation on wall thinning and creep damage in boiler tube due to scale formation. Advanced Materials Research, 538. pp. 1781-1784. ISSN 1662-8985

Karim, A.N. Mustafizul and Khalid, Nor A. B. and Ismail, Raja N. H. R. and Haque, Mahbubul and Begum, Shahida (2012) Securing superior properties of composite (PP+WF) through central composite design. Advanced Materials Research, 535. pp. 186-189. ISSN 1662-8985

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul (2012) Surface integrity in hot machining of AISI D2 hardened steel. Advanced Materials Research, 500. pp. 44-50. ISSN 1022-6680

Karim, A.N. Mustafizul and Lajis, M.A. and Amin, A. K. M. Nurul (2011) Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts. Advanced Materials Research, 264-65. pp. 907-912. ISSN 1662-8985

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985

Mohamed Ariff, Tasnim Firdaus and Thauri, Shahdura Hammad and Karim, A.N. Mustafizul (2011) Enhancing mechanical and structural properties of TiC inserts using microwave energy. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011), 6th-7th June 2011, Putrajaya, Kuala Lumpur.

Thauri, Shahdura Hammad and Mohamed Ariff, Tasnim Firdaus and Karim, A.N. Mustafizul (2011) Study of TiC cutting tool insert using microwave synthesis. Applied Mechanics and Materials, 52-54. pp. 2116-2121. ISSN 1660-9336

El-hadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for preheated end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 576-582. ISBN 978-0-9808251-0-7

El-hadie, M and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2011) Development of mathematical cost model for room temperature end-milling of AISI D2 tool steel. In: Proc. of the 2nd International Conference on Industrial Engineering and Operations Management (IEOM2011). IEOM Research Solutions Pty Ltd, Kuala Lumpur, Malaysia, pp. 331-337. ISBN 9780980825107

Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul (2011) Heat assisted machining of hardened steel AISI D2. IIUM Press, Kuala Lumpur. ISBN 9789670225791

Elhadie, Mohamed and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2011) Machining cost in conventional and hot machining: comparison and modelling. LAP Lambert Academic Publishing, USA, UK. ISBN 978-3-8443-1703-9-5

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Modeling in preheated machining of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 43-48. ISBN 9789674181758

Lajis, M. Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, Khaled (2011) Modelling of tool life by response surface methodology in hard milling of AISI D2 tool steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 175-179. ISBN 9789674181758

Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul (2011) Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 35-42. ISBN 9789674181758

Karim, A.N. Mustafizul and Azon, Nurul Husna (2011) Value stream mapping: an important footstep for value analysis and value engineering. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 223-230. ISBN 9789674181598

Lajis , M.A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, A. M. K. (2010) Preheating in end milling of AISI D2 hardened steel with coated carbide inserts. Advanced Materials Research, 83-86. pp. 56-66. ISSN 10226680

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Karim, A.N. Mustafizul and Saad, Mohd Fadli (2009) Development of a pilot-scale web-based inventory management system foe lab equipment and consumables. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2009) Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta, Turnad Lenggo and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2009) Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Ginta , Turnad L. and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Mohd Radzi, H.C.D. (2009) Improved tool life in end milling ti-6al-4v through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Turnad L., Ginta (2008) Theoretical and experimental investigation in prediction of tool life in preheated machining of AISI 02 hardened steel. IIT Madras, Chennai, India.

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2008) Hot machining in end milling of hardened steel AISI D2. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008).

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Ginta , Turnad L. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2008) Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts. In: International Joint Conference in Engineering (IJSE 2008), 4-5 August, 2008, Jakarta, Indonesia.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2008) Modelling and optimization of tool life in end milling of AISI 02 hardened steel. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ’08), July 23-25, 2008, Naples, Italy.

Begum, Shahida Nathira and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2008) Characterization and performance evaluation of zinc oxide varistor blocks processed by latex binders. Journal of American Ceramic Society, 91 (10). pp. 3216-3221. ISSN 0002-7820

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A. M. Khalid and Turnad L., Ginta (2008) Prediction of tool life in end milling of hardened steel AISI D2. European Journal of Scientific Research, 21 (4). pp. 592-602. ISSN 1450-216X,

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

Turnad L., Ginta and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model for PCBN inserts during the high speed end milling of AISI H13 hardened tool steel. In: International Conference on Mechanical Engineering (ICME07), 29-31 Dec. 2007, Dhaka, Bangladesh.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ishtiyaq, M. H. (2007) Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A.M. Khalid (2007) Prediction of surface roughness in hard milling of AISI D2 tool steel. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Khalid, A. K. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model of TIALN coated tools during the high speed hard milling of AISI H13 steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, 24 - 27 October 2007, Zadar, Croatia.

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Khalid, A. K. H. (2007) Modelling of tool life by response surface methodology in hard milling of Aisi D2 tool steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, , 24 - 27 Oct., 2007, Zadar, Croatia.

Hafiz, A. K. M. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI H13 tool steel. In: International Conference on Industrial Engineering and Engineering Management, 2 - 5 December 2007, Singapore.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI HI3 tool steel. In: 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2 - 4 December 2007, Singapore.

Begum, Shahida and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2006) Performance evaluation of zinc oxide varistor produced from powder under different spray drying conditions. In: 1st International Conference and 7th AUN/SEED - Field wise Seminar on Manufacturing Material Processing (ICMM2006), 14-16 March 2006, Kuala Lumpur.

Karim, A.N. Mustafizul and Begum, Shahida and Hashmi, M. S. J (2005) Electrical performance of zinc oxide varistor using powders processed by different latex binders. In: The 9th Japan Int. SAMPE symposium, Nov 29 - Dec 2, 2005, Tokyo Big Sight, Tokyo, Japan.

Karim, A.N. Mustafizul and Hashmi, M. S. J. (2005) Performance of zinc oxide varistor discs sintered by alternative orientations. In: ATCi2005, Conference on Advanced Materials, 6 - 8 Dec. 2005, Putrajaya, Malaysia.

Hasan, S. Mainul and Karim, A.N. Mustafizul (2003) Optimization of product mix in a typical yarn manufacturing industry. In: Proc. of the 5th Int. Con. on Mechanical Engineering, Paper ID AM -07, 26-28 Dec., 2003 at BUET, Dhaka, Bangladesh. Department of Mechanical Engineering, BUET, Dhaka, pp. 1-5.

Hoque, Mohammed Tariqul and Karim, A.N. Mustafizul and Haque, A. F. M. Anwarul (2003) Scenario of power distribution network in the City of Dhaka in the context of reliability. In: 3rd International Conference of Mechanical Engineers & 8th Annual Paper Meet on E-Manufacturing, 20-22 March 2003, Institution of Engineers, Bangladesh.

Islam, Md. Ariful and Haque, A. F. M. Anwrul and Karim, A.N. Mustafizul (2002) Enhancement of quality small and cottage industries in Bangladesh: Review, analysis and strategies. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Islam, Md. Monowarul and Haque, A. F. M. Anwarul and Karim, A.N. Mustafizul (2002) Maximization of production in knit dyeing industries. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Hasan, S. Mainul and Karim, A.N. Mustafizul (2002) Possible cost reduction by applying MRP in a transformer manufacturing company of Bangladesh. In: International Conference on Manufacturing (ICM 2002), 09-11 August, 2002, Dhaka, Bangladesh.

Hossain, Md. Bellal and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2000) Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000), 24-26 February, 2000, Dhaka.

Paul, Dilip Kumar and Karim, A.N. Mustafizul (1999) Economic performance of bio-gas plant in the context of Bangladesh. In: 2nd International Seminar on Renewable Energy for Poverty Alleviation (ISREPA-99), 26-27 November 1999, Dhaka.

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1998) Holding time in the pressing cycle and its influence on the performance characteristics of zinc oxide varistor discs. Journal of Materials Processing Technology, 77. pp. 54-58. ISSN 0924-0136

Amin, A. K. M. Nurul and Sarker, Md. Ruhul Amin and Ahmed, Mahiuddin and Karim, A.N. Mustafizul (1998) Selection of cemented carbide turning tools using EMF and optimization criteria. Journal of Materials Processing Technology, 77. pp. 59-63. ISSN 0924-0136

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1996) Long and short duration pulse performance of zinc oxide varistor compacted with modified pressing cycle. In: International Congress on Advances in Powder Metallugy and Particulate Material, 16-21 June 1996, Washingto D. C..

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1996) Performance characteristics of zinc oxide varistor processed under different pressing conditions. In: International Congress on Advances Advances in Powder Metallurgy and Particulate Materials, 16-21June 1996, Washington D. C..

Karim, A.N. Mustafizul and Puyane, R. and El-Baradie, M.A and Hashmi, M. S. J. (1995) Effect of compaction parameters on the physical properties of zinc oxide varistor discs. In: International Conference on Mechanics of Solids and Materials Engineering, 8-10 June 1995, Singapore.

Sarker, M. Ruhul Amin and Karim, A.N. Mustafizul and Haque, A. F. M. Anwarul (1995) An optimum batch size for a production system operating under a continuous supply/demand. International Journal of Industrial Engineering, 2 (3). pp. 189-198. ISSN 1072-4761

Sarker, M. Ruhul Amin and Karim, A.N. Mustafizul and Azad, G. M. Salam (1993) Two cases of integrated inventory system. Journal of the Institution of Engineers, Bangladesh, 21 (4). pp. 45-52. ISSN 0379-4318

Karim, A.N. Mustafizul and Rahman, Md Mizanur (1993) Cost-effective analysis on the suitability of photovoltaic pumping systems in Bangladesh. Solar Energy Materials and Solar Cells, 30 (2). pp. 177-188. ISSN 0927-0248

This list was generated on Thu Dec 5 03:16:58 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0