IIUM Repository

Items where Author is "Faris, Waleed Fekry"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 149.

Article

Hasbullah, Faried and Faris, Waleed Fekry and Darsivan, Fadly Jashi and Abdelrahman, Mohammad (2019) Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems, 26 (2). pp. 188-224. ISSN 1744-232X E-ISSN 1741-5152 (In Press)

Mondal (Das), Kuheli and Das, Saurav and Abu, Aminudin and Hamada, Nozomu and Toh, Hoong Thiam and Das, Saikat and Faris, Waleed Fekry (2018) All-pass filtered x least mean square algorithm for narrowband active noise control. Applied Acoustics, 142. pp. 1-10. ISSN 0003-682X

Muhammad, Abdulazeez Uba and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Automotive seat fit parameters based on representative Nigerian anthropometric data. Malaysian Journal of Public Health Medicine, 18 (Special Issue 2). pp. 32-40. ISSN 1675-0306

Uba, Muhammad Abdulazeez and Abdullah, Kassim Abdulrahman and Faris, Waleed Fekry (2018) Representative Nigerian anthropometric data for automotive applications. Journal of Mechanical Engineering, 5 (Specialissue 4). pp. 68-88. ISSN 1823-5514

Shah, Jawad and Okasha, Mohamed and Faris, Waleed Fekry (2018) Gain scheduled integral linear quadratic control for quadcopter. International Journal of Engineering and Technology, 7 (4.13 (Special issue 13)). pp. 81-85. ISSN 2227-524X

Faris, Waleed Fekry and Elmoselhy, Salah (2017) The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah, 22 (1). pp. 29-64. ISSN 1394-6870

Elmoselhy, Salah A.M. and Faris, Waleed Fekry and Rakha, Hesham A. (2017) Validated analytical modelling of supercharging centrifugal compressors with vaneless diffusers for H2-biodiesel dual-fuel engines with cooled EGR. International Journal of Hydrogen Energy, 42 (43). pp. 26771-26786. ISSN 0360-3199

Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris and Khan, Sher Afghan (2016) Thermal performance of fined plate mini-channel heat sink. IOSR Journal of Mechanical & Civil Engineering ( IOSR-JMCE), 18 (6). pp. 1-4. ISSN 2320-334x E-ISSN 2278-1684

Elmoselhy, Salah A M and Faris, Waleed Fekry and Rakha, Hesham A. (2016) Experimentally validated analytical modeling of diesel engine power and in-cylinder gas speed dynamics. Journal of Mechanical Science and Technology, 30 (10). pp. 4725-4734. ISSN 1738-494X E-ISSN 1976-3824

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah (2016) Validated analytical modeling of diesel engine regulated exhaust CO emission rate. Advances in Mechanical Engineering, 8 (6). pp. 1-15. ISSN 1687-8140

Ahmed, H and Faris, Waleed Fekry and Akmeliawati, Rini (2016) Fuel efficient intelligent control of heavy trucks. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4164-4171. ISSN 1819-6608

Albarody, Thar M. Badri and Al-Kayiem, Hussain H. and Faris, Waleed Fekry (2016) The transverse shear deformation behaviour of magneto-electro-elastic shell. Journal of Mechanical Science and Technology, 30 (1). pp. 77-87. ISSN 1738-494X E-ISSN 1976-3824

Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2016) Characterization of magnetorheological elastomer (MRE) engine mounts. Materials Today: Proceedings, 3 (2). pp. 411-418. ISSN 2214-7853

Sabaneh, Omar A. O. and Faris, Waleed Fekry and Okasha, Mohamed Elsayed Aly Abd Elaziz and Hasbullah, Faried (2016) A mixed control system for active suspension for off-road vehicles. International Journal of Vehicle Noise and Vibration, 12 (2). pp. 101-137. ISSN 1479-148X E-ISSN 1479-1471

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Jailani, Mohd Noor (2015) Dynamic characterisation of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3-4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor, Mohd Jailani (2015) Dynamic characterization of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X

Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2015) Evaluation of elastomeric models for engine mountings applications. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 210-224. ISSN 1479-1471 E-ISSN 1479-148X

Faried Hasbullah, Faried Hasbullah and Faris, Waleed Fekry and Ridhuan Siradj , Fadly Jashi Darsivan and Abdelrahman, Mohammad (2015) Ride comfort performance of a vehicle using active suspension system with active disturbance rejection control. International Journal of Vehicle Noise and Vibration, 11 (1). pp. 78-101. ISSN 1479-148X (O), 1479-1471 (P)

Elmoselhy, Salah A.M. and Faris, Waleed Fekry and A. Rakha, Hesham (2014) Experimentally validated analytical modeling of diesel exhaust HC emission rate. Journal of Mechanical Science and Technology, 28 (10). pp. 4139-4149. ISSN 1738-494X E-ISSN 1976-3824

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Impact of intelligent transportation systems on vehicle fuel consumption and emission modeling: an overview. SAE International Journal of Materials and Manufacturing, 7 (1). pp. 129-146. ISSN 1946-3979 E-ISSN 1946-3987

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan and Ridhuan Siradj , Fadly Jashi Darsivan (2014) Optimisation and control of semi-active suspension using genetic algorithm for off-road full vehicle. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 372-382. ISSN 1745-6444 (O), 1745-6436 (P)

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor , Mohd Jailani (2014) Dynamic characterisation of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1660-9336

Hanouf, Zahir and Faris, Waleed Fekry and Nor, Mohd Jailani Mohd (2014) Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1662-7482

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Supercharged diesel powertrain intake manifold analytical model. International Journal of Vehicle Systems Modelling and Testing, 9 (1). pp. 1-35. ISSN 1745-6436 E-ISSN 1745-6444

BenLahcene, Zohir and Hasbullah, Faried and Faris, Waleed Fekry (2014) A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS), 21 (1). pp. 26-41. ISSN 1741-5152 (O), 1744-232X (P)

Ahmad Shuhaili, Ahmad Fadzil and Ihsan, Sany Izan and Faris, Waleed Fekry (2013) Air pollution study of vehicles emission in high volume traffic: Selangor, Malaysia as a case study. WSEAS Transactions on Systems , 12 (2). pp. 67-84. ISSN 2224-2678 (O), 1109-2777 (P)

Faris, Waleed Fekry and Tahir, Ahmad M. and Badran, Marwan A A (2013) Digital implementation of space vector pulse width modulation technique using 8-bit microcontroller. World Applied Sciences Journal, 21 (1). pp. 21-28. ISSN 1818-4952

Ridhuan Siradj , Fadly Jashi Darsivan and Faris, Waleed Fekry (2012) Vibration investigation of a quarter car with nonlinear shock absorber model. Advanced Materials Research, 576. pp. 665-668. ISSN 1022-6680

Faris, Waleed Fekry (2012) "وسائل التربية فى رسائل النور "رؤية في توحيد المفاهيم. International Journal of Muslim Unity, 10 (1-2). pp. 47-83. ISSN 1675-7777

Faris, Waleed Fekry and Khalid, Asad A. and Albagul, Abdulgani and Ismail, Godem A. (2012) Investigation of the perfomance of a rotor-bearing systems containig composite and non-composite squeeze film dampers. Materials and Design, 34. pp. 340-345. ISSN 0261-3069

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element approach. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry and Asrar, Waqar and Omerbegovic, Adna (2012) Micropump modeling: current status and challenges. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 134-142. ISSN 1991-8178

Faris, Waleed Fekry (2012) مقابلة مع الدكتور عبد العزيز التويجري: الأمين العام للمنظمة الإسلامية للتربية والعلوم والثقافة (الإيسيسكو. International Journal of Muslim Unity, 10 (1-2). pp. 83-95. ISSN 1675-7777

syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and Faris, Waleed Fekry and Ihsan, Sany Izan (2012) Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate. International Journal of Vehicle Noise and Vibration, 8 (4). pp. 302-317. ISSN 1479-148X (O), 1479-1471 (P)

Mohamad, Kaleemullah and Faris, Waleed Fekry and Rashid, Muhammad Mahbubur and Hasbullah, F. (2012) Comparative analysis of LQR and robust controller for active suspension. International Journal of Vehicle Noise and Vibration, 8 (4). pp. 367-386. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element appraoch. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Khaliq R., Abdul and Kafafy, Raed and Salleh, Hamzah Mohd. and Faris, Waleed Fekry (2012) Enhancing the efficiency of polymerase chain reaction using graphene nanoflakes. Nanotechnology, 23 (45). pp. 1-8. ISSN 0957-4484

Faris, Waleed Fekry and Rakha, Hesham and Kafafy, Raed Ismail and Mohammed Idres, Moumen and Elmoselhy, Salah (2011) Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 318-392. ISSN 1745-6444 (O), 1745-6436 (P)

Edy Sutjipto, Agus Geter and Faris, Waleed Fekry and Adesta, Erry Yulian Triblas and Hanim, Hafizah (2011) Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85. pp. 392-395. ISSN 1660-9336

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and S., Farahain (2011) Chip serration frequency-the primary cause of chatter during end milling operation. Advanced Materials Research, 264-26. pp. 1174-1179. ISSN 1022-6680

Patwari, Muhammed Anayet Ullah and A.K.M., Nurul Amin and Faris, Waleed Fekry (2011) Statistical Approach for the Development of Tangential Cutting Force Model in End Milling Of Ti6Al4V. Advanced Materials Research, 264/65. pp. 1160-1165. ISSN 1022-6680

Loh, S. K. and Faris, Waleed Fekry and Hamdi, M. and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 E-ISSN 1869-1900

Loh, S.K. and Faris, Waleed Fekry and Chin, W. M. (2011) Vibrational characteristics of piping system in air conditioning outdoor unit. Science China Technological Sciences, 54 (5). pp. 1154-1168. ISSN 1674-7321 (print), 1869-1900 (online)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2011) Influence of chip serration frequency on chatter formation during end milling of Ti6Al4V. Journal of Manufacturing Science and Engineering, 133 (1). 011013-1. ISSN 1087-1357

Mahil, M. mahil and Ahmad Shah, Muzzaffar and Faris, Waleed Fekry (2011) Active engine mounting controller design using linear quadratic regulator and proportional integral derivative. International Journal of Automation and Control , 5 (3). pp. 284-297. ISSN (Online): 1740-7524 - (Print): 1740-7516

Mohammed Idres, Moumen and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. International Journal of Vehicle systems Modelling and Testing, 6 (3/4). pp. 396-407. ISSN 1745-6436

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 219-231. ISSN 1745-6444 (O), 1745-6436 (P)

Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Sutjipto, Agus Geter Edy (2011) Random vibrations of a beam on elastic foundation. Australian Journal of Basic and Applied Sciences, 5 (6). pp. 456-460. ISSN 1991-8178

Faris, Waleed Fekry and Al-Omari, Yasir and Sapian, Abdul Razak and Husin, Muhammad (2011) A new concept design of a motorbike with 3D model for the Malaysian market. Journal of Design Research, 9 (1). pp. 16-43. ISSN 1569-1551

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 307-317. ISSN 1745-6444 (O), 1745-6436 (P)

El-Hafidi, Ali and Martin , Bruno and Faris, Waleed Fekry and Lay, Béatrice (2011) A study of noise transmission through cylindrical shell using modal truncation approach. International Journal of Vehicle Noise and Vibration, 7 (3). pp. 271-284. ISSN 1479-148X (O), 1479-1471 (P)

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2010) Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research, 83-86. pp. 637-645. ISSN 1022-6680

Hasbullah, Faried and Faris, Waleed Fekry (2010) An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2-4). pp. 200-214. ISSN 1479-1471 E-ISSN 1479-148X

Kabbashi, Nassereldeen Ahmed and Shuriye, Abdi Omar and Faris, Waleed Fekry (2010) The teaching of ethics at KOE, IIUM. Eubios Journal of Asian and International Bioethics, 20 (6 SupB). p. 256. ISSN 1173-2571

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research, 97-101. pp. 1989-1992. ISSN 1662-8985

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6444 (O), 1745-6436 (P)

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi B. and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). pp. 59-71. ISSN 1745-6436 E-ISSN 1745-6444

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2010) Assessment of different semi-active control strategies on the performance of off-road vehicle suspension systems. International Journal of Vehicle Systems Modelling and Testing , 5 (2-3). pp. 254-271. ISSN 1745-6444

Ullah Patwari, Mohammed Anayet and Amin, A. K. M. Nurul and Istihyaq , M.H. and Faris, Waleed Fekry (2010) Development of a mathematical model for the prediction of chip formation instability and its verification by fuzzy logic with genetic algorithm. International Journal of Machining and Machinability of Materials (IJMMM), 8 (1/2). pp. 38-54. ISSN 1748-572X

Faris, Waleed Fekry and Saad, Fazidah (2010) Dynamic characterisation of elastomeric engine mounts of different geometry used in automotive industry: simulation approach. International Journal of Vehicle Noise and Vibration, 6 (1). pp. 1-39. ISSN 1479-148X (O), 1479-1471 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Al-Turki , Abdullah and Faris, Waleed Fekry (2010) Modelling manufacturing process using a modified IDEF0 framework a case study of a car door manufacturing plant. International Journal of Engineering Systems Modelling and Simulation, 2 (4). pp. 234-241. ISSN 1755-9766

Nasef, Mohamed Mahmoud and Faris, Waleed Fekry (2010) Teaching engineering ethics: a necessary measure for engineering capacity building in Arab countries. International Journal of Arab Culture, Management and Sustainable Development, 1 (4). pp. 318-325. ISSN 1753-9420 (O), 1753-9412 (P)

Al-Turki, Abdullah Nasser and Faris, Waleed Fekry (2010) A critical evaluation on the effectiveness of ISO 9001:2000 (QMS) implementation in Malaysian and Saudi manufacturing companies. International Journal of Arab Culture, Management and Sustainable Development, 1 (3). pp. 302-324. ISSN 1753-9420 (O), 1753-9412 (P)

Hasbullah, Faried and Faris, Waleed Fekry (2010) An evaluation of LQR and fuzzy logic controllers for active suspension using half car model. International Journal of Vehicle Noise and Vibration, 6 (2/3/4). pp. 200-214. ISSN 1479-148X (O), 1479-1471 (P)

Syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and Faris, Waleed Fekry (2010) A study of annular plate buckling problem with tension loaded at inner edge. Analele Universitatii 'Eftimie Murgu', 17 (1). pp. 97-103. ISSN 1453-7397 E-ISSN 2344-4568

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Faris, Waleed Fekry and Ata, A.A and Sa'Adeh, M.Y (2009) Energy minimization approach for a two-link flexible manipulator. Journal of Vibration and Control, 15 (4). pp. 497-526. ISSN 1077-5463

Darsivan, Fadly Jashi and Martono, Wahyudi and Faris, Waleed Fekry (2009) Active engine mounting control algorithm using neural network. Shock and Vibration, 16. pp. 417-437. ISSN 1070-9622

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-1471 E-ISSN 1479-148X

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-148X (O), 1479-1471 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Artificial neural network chip serration frequency model in end milling of medium carbon steel. Research Journal of Applied Sciences, 4 (3). pp. 108-112. ISSN 1815-932X

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4). pp. 231-241. ISSN 1755-9766

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S.K. (2009) Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration, 2009 (508076). pp. 1-10. ISSN 1687-6261

Loh, S.K. and Chin, W. M. and Faris, Waleed Fekry (2009) Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design, 30. pp. 3206-3216. ISSN 0261-3069

Hanouf, Zahir Ahmad and Faris, Waleed Fekry (2009) Investigation into noise problems in vehicle structure using vibro-acoustic approach. International Journal of Vehicle Noise and Vibration, 5 (3). pp. 238-260. ISSN 1479-148X (O), 1479-1471 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Ihsan, Sany Izan and Ahmadian, Mehdi and Faris, Waleed Fekry and Blancard, E. D. (2009) Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration, 16. pp. 593-605. ISSN 1070-9622

Faris, Waleed Fekry and El Hawari, Yaser and Ihsan, Sany Izan (2009) Technology transfer: challenges and prospective Arab world as a case study. International Journal of Arab Culture, Management and Sustainable Development, 1 (2). pp. 195-207. ISSN 1753-9420 (O), 1753-9412 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control, 6 (1). pp. 62-71. ISSN 1746-6180 (O), 1746-6172 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-1471 E-ISSN 1479-148X

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2008) Analysis of control policies and dynamic response of a Q-car 2-DOF semi active system. Shock and Vibration, 15 (5). pp. 573-582. ISSN 1070-9622

Darsivan, Fadly Jashi and Faris, Waleed Fekry and Martono, Wahyudi (2008) Active engine mounting controller using extended minimal resource allocating networks. International Journal of Vehicle Noise and Vibration, 4 (2). pp. 150-168. ISSN 1479-148X (O),1479-1471 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel. Journal of Engineering, 6 (3). pp. 171-178. ISSN 1584-2673

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration, 3 (4). pp. 370-405. ISSN 1479-148X

Khalifa, Othman Omran and Densibali , Amirasyid and Faris, Waleed Fekry (2006) Image processing for chatter identification in machining processes. International Journal of Advanced Manufacturing Technology, 31. pp. 443-449. ISSN 1433-3015 (O); 0268-3768 (P)

Book

Shuriye, Abdi Omar and Faris, Waleed Fekry, eds. (2011) Contributions of early muslim scientists to engineering sciences and related studies. IIUM Press, Kuala Lumpur. ISBN 978-967-418-157-4

Faris, Waleed Fekry (2011) Introduction to machine element design for engineers. IIUM Press, Kuala Lumpur. ISBN 9789675272936

Muyibi, Suleyman Aremu and Faris, Waleed Fekry and Daoud, Jamal Ibrahim and Mirghani, Mohamed Elwathig Saeed and Shuriye, Abdi Omar and Alkhatib, Ma'an Fahmi Rashid and Chebil, Jalel, eds. (2011) Islamization, ethics and values in science and technology. IIUM Press, International Islamic University Malaysia. ISBN 978-967-022-582-1

Faris, Waleed Fekry and Mohyuddin, Muhammad Raheel and Ismail, Ahmad Faris (2009) Fundamentals of fluid mechanics. IIUM Press, Kuala Lumpur. ISBN 9789833855889

Faris, Waleed Fekry and Ihsan, Sany Izan (2009) A first course in control systems. IIUM Press, Kuala Lumpur. ISBN 9789833855650

Shuriye, Abdi Omar and Hassan, Mohamed H. and Faris, Waleed Fekry, eds. (2006) Islamic engineering ethics: foundation integration and practice. Future Text Publications, Subang Jaya, Selangor. ISBN 9833004660

Book Chapter

Faris, Waleed Fekry (2013) Kulliyyah of Engineering; Producing a Muslim engineer. In: IIUM: The Premier Global Islamic University. IIUM Press, Kuala Lumpur, pp. 239-249. ISBN 9789674182700

Mohamed Noor, Noraini and Faris, Waleed Fekry (2011) Al-Majusi: the pioner in obstetrics. In: Contributions of Muslim Scientists to Medicine and Related Sciences. IIUM Press, Kuala Lumpur, pp. 7-11.

Faris, Waleed Fekry and Martono, Wahyudi and H.J Hajjaj, Omar (2011) Design and implementation of fuzzy control for two link flexible manipulator. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 209-214. ISBN 9789670225685

Al-Khatib, Ma An Fahmi Rashid and Khamis, Mohamad Faizal and Faris, Waleed Fekry (2011) Design and production of carbon nanotube-based biosensor. In: Current research and developments in biotechnology engineering at IIUM. IIUM Press, Kuala Lumpur, pp. 130-137. ISBN 9789674181369

Faris, Waleed Fekry and Khalifa, Othman Omran and Hawari, Muaz (2011) E-waste : problems, Islamic perspective and solutions. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 112-124. ISBN 9789670225821

Md Nor, Khairul affendy and Shafie, Amir Akramin (2011) Fazlur Rahman Khan's understanding of tube structural system of skyscrapes. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 115-120. ISBN 978-967-418-157-4

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2011) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 591-596. ISBN 9789670225685

Shuriye, Abdi Omar and Faris, Waleed Fekry (2011) Muslim contributions to physics. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 100-110. ISBN 9789670225821

Isqeel , Abdullateef Ayodele and Faris, Waleed Fekry (2011) Nasir al-Din al-Tusi's understanding of trigonometry. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 58-64. ISBN 978-967-418-157-4

Darsivan, Fadly Jashi and Martono, Wahyudi and Faris, Waleed Fekry (2011) Neural network controlled of an active engine mounting system using a nonlinear electromagnetic. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 194-202. ISBN 9789670225685

BenLahcene, Zohir and Faris, Waleed Fekry and Khan, Md. Raisuddin and Ihsan, Sany Izan (2011) Semi-active suspension system for off-road vehicles. In: Mechatronics book series: selected papers from ICOM '01, ICOM '05, and ICOM '08. IIUM Press, Kuala Lumpur, pp. 119-128. ISBN 9789670225685

Hassan, Sayed Desouky and Faris, Waleed Fekry and Kafafy, Raed (2011) Towards an Islamic theory of development based on Qur'anic approach : Surah Quraish as a case study. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 46-54. ISBN 9789670225821

Faris, Waleed Fekry and Daoud, Jamal Ibrahim (2011) Use and abuse of technology : Internet as a case study. In: Islamization, Ethics and values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 143-156. ISBN 978-967-0225-82-1

Kamaruddin, Mohd Hider and Faris, Waleed Fekry (2011) The contribution of Ibn al-Awwam in botany and agriculture. In: Contributions of Early Muslim Scientists to Engineering Sciences and related studies. IIUM Press, Kuala Lumpur, pp. 41-44. ISBN 978-967-418-4

Saquib, Nazmus and Faris, Waleed Fekry (2011) The nano world of Munir Nahfey. In: Contributions of Early Muslim Scientists to Engineering Sciences and Related Studies. IIUM Press, Kuala Lumpur, pp. 127-134. ISBN 978-967-418-157-4

Faris, Waleed Fekry (2009) Nonlinear modeling and analysis of mems-based diaphragm devices. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 360-371. ISBN 9789833855780

Khalifa, Othman Omran and Faris, Waleed Fekry (2006) Ethical challenges of informatin technology : an Islamic perspective. In: Islamic Engineering Ethics : Foundation Integration and Practice. Future Text Publications, Kuala Lumpur, Malaysia, pp. 81-89. ISBN 983-3004-66-0

Faris, Waleed Fekry and Khalifa, Othman Omran (2006) Muslim scientists and world civilizations. In: Islamic Engineering Ethics : Foundation Integration and Practice. Future Text Publications, Kuala Lumpur, Malaysia, pp. 18-26. ISBN 983-3004-66-0

Conference or Workshop Item

Suliman, M.M. Ali and Omar, Ashraf A. and Faris, Waleed Fekry and Ismail, Ahmad Faris and Mohamed Ali, Jaffar Syed (2019) Aerodynamics of a circular planform wing. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Hasbullah, Faried and Faris, Waleed Fekry (2018) Simulation of disturbance rejection control of half-car active suspension system using ADRC with decoupling transformation. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17), 8th-9th Aug. 2017, Kuala Lumpur.

Hanouf, Zahir and Faris, Waleed Fekry and Ahmad, Kartini (2017) An investigation into NVC characteristics of vehicle behaviour using modal analysis. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris (2017) Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.

Mohamad, Nor Asiah and Faris, Waleed Fekry (2016) Internal determinants of Waqaf in non-Muslim countries. In: Fifth International Journal of Awqaf 2016, 26th-28th April 2016, Sydney, Australia. (Unpublished)

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan (2011) Analysis and simulation of semi-active suspension control policies for two-axle off-road vehicle using full model. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.

Mahmoud Idres, Moumen Mohammed and Kafafy, Raed and Faris, Waleed Fekry (2011) Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May 2011, Kuala Lumpur, Malaysia.

Mohammed, Kaleemullah and Faris, Waleed Fekry and Faried, Hasbullah (2011) Design of robust Hoo, fuzzy and LQR controller for active suspension of a quarter car model. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Rasheed, Abdul Khaliq and Kafafy, Raed and Faris, Waleed Fekry and Mohd. Salleh, Hamzah (2011) Enhancement of polymerase chain reaction using graphene nano-flakes. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Mohamad Koya, Muhamad Aslam and Mohamad Ibrahim , Azhar and Akmeliawati, Rini and Sutjipto, Agus Geter Edy and Faris, Waleed Fekry (2010) Artificial nose for alcohol detection. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Hasbullah, Faried and Faris, Waleed Fekry (2010) A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model. In: 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010, 7-10 december 2010, Singapore.

Faris, Waleed Fekry and Mohammed , H.M. and Ng, Kok Heng (2010) An investigation of the mechanical behavior of a microswitch beam under thermal and electrostatic loading including cryogenic effect. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010), 5-7 May 2010, Seville, Spain.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Ride comfort assessment in off road vehicles using passive and semi-active suspension. In: Asia pacific Conference on Defence & Security Technology (DSTC 2009), 6-7 October 2009, Hotel Istana, Kuala Lumpur. (Unpublished)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Faris, Waleed Fekry and El Hawari, Yaser and Ihsan, Sany Izan and Hassan Abdalla Hashim, Aisha (2009) Technology transfer: Challenges and prospective Arab world as a case study. In: International Engineering Education Conference (IEEC 2009), 16-18 May 2009, Madinah, Kingdom of Saudi Arabia.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020. In: Malaysian Metallurgical Conference, MMC 2008, 3 - 4 December 2008, UKM, Bangi, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

BenLahcene, Zohir and Faris, Waleed Fekry and Khan, Md. Raisuddin and Ihsan, Sany Izan (2008) Semi-active suspension system for off-road vehicles. In: 3rd International Conference on Mechatronics, ICOM’08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2008) Analysis of semiactive suspension systems using half-car model. In: FISITA 2008 World Automotive Congress, 14-19 September 2008, Munich, Germany. (Unpublished)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2008) An assessment of semi-active suspension for passenger cars using full-car model. In: The 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME), 27 - 28 May 2008, Cairo, Egypt. (Unpublished)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Hanouf, Zahir and Mohd. Nor, Mohd. Jailani and Faris, Waleed Fekry (2007) Engine noise: An overview on current research trends. In: Conference on Advances in Noise, Vibration and Comfort (NVC) 2007, 27th-28th November 2007, Putra Jaya , Malaysia.

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Analysis of quarter-car 2 degree-of-freedom semiactive systems. In: IASTED Asian Conference on Modelling and Simulation, 8 October 2007 through 10 October 2007, Beijing, China.

Ridhuan Siradj , Fadly Jashi Darsivan and Wahyudi, Martono and Faris, Waleed Fekry and Ata, A.A (2007) Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07), 26th-29th March 2007, Sharjah, U.A.E. (Unpublished)

Abdalla, Mostafa M. and Reddy, Chevva Konda and Faris, Waleed Fekry and Gürdal, Zafer (2005) Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2003, 7th-10th April 2003, Norfolk, Virginia.

Faris, Waleed Fekry and Mohammed, Hazem (2004) A comparison between two solution approaches for diaphragm-based capacitive pressure microsensor. In: 2004 IEEE International Conference on Semiconductor Electronics, 7-9 December 2004, Kuala Lumpur.

Faris, Waleed Fekry and Abdel-Rahman, Eihab M. and Nayfeh, Ali H. (2002) Mechanical behavior of an electrostatically actuated micropump. In: 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 22nd-25th April 2002, Denver, Colorado.

This list was generated on Sat Oct 19 13:36:17 2019 +08.