Items where Author is "Adesta, Erry Yulian Triblas"

Rozeman, Salfarina and Adesta, Erry Yulian Triblas and Sophian, Ali and Tomadi, Siti Haryani (2024) Selection of optimal bending types in die process of L-shaped panels considering the springback behaviours. International Journal of Engineering Materials and Manufacture, 9 (3). pp. 96-116. E-ISSN 0128-1852

Hakim, Galang Persada Nurani and Habaebi, Mohamed Hadi and Islam, Md. Rafiqul and Alghaihab, Abdullah and Yusoff, Siti Hajar and Adesta, Erry Yulian Triblas (2023) Self-Organized Wireless Sensor Network (SOWSN) for dense jungle applications. IEEE Access. E-ISSN 2169-3536

Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Tomadi, Siti Haryani and Mahad, Muhammad Akmal and Adesta, Erry Yulian Triblas (2023) Effect of feed rate on tool wear and surface condition during milling of CFRP. Jurnal Tribologi, 38. pp. 40-48. E-ISSN 2289-7232

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Rozeman, Salfarina and Adesta, Erry Yulian Triblas and Sophian, Ali and Tomadi, Siti Haryani (2023) Improvement activities in stamping die manufacturing: a systematic literature review. International Journal of Engineering Materials and Manufacture, 8 (2). pp. 21-35. E-ISSN 0128-1852

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Mohamed, Hussein Mohamed and Sophian, Ali and Sulaiman, Nadzril and Adesta, Erry Yulian Triblas (2022) Tunnel-magnetoresistive-based pulsed Eddy current probe for inspection of corrosion under insulation. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021) 21/06/2021 - 23/06/2021, 21-23 June 2021, Kuala Lumpur, Malaysia.

Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Application of TRIZ to modify oven drying for SMEs to maintain the eugenol content in dried cloves. Eastern-European Journal of Enterprise Technologies, 2 (1 (116)). pp. 47-54. ISSN 1729-3774 E-ISSN 1729-4061

Hakim, Galang P. N. and Habaebi, Mohamed Hadi and Toha, Siti Fauziah and Islam, Md. Rafiqul and Yusoff, Siti Hajar and Adesta, Erry Yulian Triblas and Anzum, Rabeya (2022) Near ground pathloss propagation model using adaptive neuro fuzzy inference system for wireless sensor network communication in forest, jungle, and open dirt road environments. Sensors, 22 (9). pp. 1-18. E-ISSN 1424-8220

Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Conduction heat transfer on the porous media in the gap with heater from below. International Journal of Engineering Materials and Manufacture, 7 (2). pp. 43-53. E-ISSN 0128-1852

Prabowo, Herry Agung and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2020) Total productive maintenance implementation’s barriers and enablers in Indonesian manufacturing companies. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 Feb.-9 April 2020, Dubai, United Arab Emirates.

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hannaf, Riyadh Ali Abdullah and Hilmy, Irfan (2020) A design consideration of heated bed's rapid levelling tool based on von misses stress using FEA simulation. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 February - 9 April 2020, Dubai; United Arab Emirates.

Al Hazza, Muataz Hazza F. and Ali, Mohammad Yeakub and Omer, T.M. and Juraimi, N. A and Adesta, Erry Yulian Triblas (2020) Flank wear prediction in high-speed face milling using Monte Carlo simulation method. In: 5th North American International Conference on Industrial Engineering and Operations Management, 10th-14h August 2020, Detroit, MI, USA.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Yeakub Ali, Mohammad (2019) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 134-137. E-ISSN 2277-3878

Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2019) Numerical analysis of aluminum foam sandwich subjected to compression loading. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 138-142. E-ISSN 2277-3878

Wilza, R. and ., Iskandar and Seprianto, Dicky and Adesta, Erry Yulian Triblas (2019) Optimization of parameters in three dimensional printing objects with fused deposition modeling technology against geometry accuracy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 175-179. ISSN 2277-3878

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075

Adesta, Erry Yulian Triblas and Hilmy, Irfan and ,, Avicenna and Agusman, D. (2019) Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), 30th–31st October 2018, Palembang, Indonesia.

Prabowo, Herry Agung and Adesta, Erry Yulian Triblas (2019) A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 39-43. ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Endut, Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur A B and Ali, Mohammad Yeakub (2018) Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-6.

Saud FEMD Alazemi, Saud and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2018) Indentation mechanism in rotary hammer forging process: analytical and numerical approach. International Journal of Engineering Materials and Manufacture, 3 (4). pp. 190-199. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung and Agusman, Delvis (2018) Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Haiyam, F. N. and Hilmy, Irfan and Sulaeman, Erwin and Mohamed Ariff, Tasnim Firdaus and Adesta, Erry Yulian Triblas (2018) Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Elbishari, E M Y and Ismail, Md Yusof and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2018) Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdullah Sidek, 'Atiah and Endut, N A (2018) A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Endut, N A and Al Hazza, Muataz Hazza Faizi and Abdullah Sidek, 'Atiah and Adesta, Erry Yulian Triblas and Ibrahim, N A (2018) Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Hamidon, R. and Riza, Muhammad and Alrashidi, R. F.F.A. (2018) Investigation of tool engagement and cutting performance in machining a pocket. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Amalina (2018) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2018) Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) Total productive maintenance (TPM) implementation based on lean manufacturing tools in Indonesian manufacturing industries. International Journal of Engineering & Technology, 7 (37). pp. 156-159. ISSN 2227-524X

Adesta, Erry Yulian Triblas and Prabowo, Herry Agung (2018) The evaluation of lean manufacturing implementation and their impact to manufacturing performance. In: 1st International Conference on Design, Engineering and Computer Sciences 2018, ICDECS 2018, 9th August 2018, Jakarta, Indonesia.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Adesta, Erry Yulian Triblas and Agusman, Delvis and Avicenna, Avicenna (2017) Internet of Things (IoT) in agriculture industries. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 5 (4). pp. 376-382. ISSN 2089-3272

Adesta, Erry Yulian Triblas and Riza, Muhammad and Avicenna, Avicenna (2017) Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 327-333. ISSN 2302-9285

Adesta, Erry Yulian Triblas and Alazemi, Yahya (2017) Integrated engineering project management Approach for typical small to medium manufacturing companies. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 541-545. ISSN 2502-4752 E-ISSN 2502-4760

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Ibrahim, Nur Asmawiyah and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Asman, Asyfiq Hanif (2017) Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture, 2 (2). pp. 25-30. E-ISSN 0128-1852

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Abu Bakar, Any Nabila and Adesta, Erry Yulian Triblas and Taha, Assem Hatem (2017) Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Taha, Assem Hatem and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Modelling and analysing deadlock in flexible manufacturing system using timed petri net. International Journal of Engineering Materials and Manufacture, 2 (1). pp. 11-15. ISSN 0128-1852

Elbishari, Elhassan M Y and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2017) An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.

Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan and Hamidon, R. (2016) The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 337-344. ISSN 1819-6608

Hamidon, R. and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohammad Yuhan (2016) Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 453-459. ISSN 1819-6608

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem and Adesta, Erry Yulian Triblas and Albakri, Adilah (2016) Modelling and analysing deadlock in flexible manufacturing system using untimed petri net. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Any Nabila, Bt Abu Bakar and Taha, Assem Hatem and Adesta, Erry Yulian Triblas (2016) Real time handling system to enhance the productivity based on the layout improvement. International Review on Modelling and Simulations (I.RE.MO.S.), 9 (6). pp. 459-463. ISSN 1974-9821

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Seder, Amin M. F. (2016) Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2015) Modelling and analysing the cutting forces in high speed hard end milling using neural network. ARPN Journal of Engineering and Applied Sciences, 10 (22). 17270 -17275. ISSN 1819-6608

Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas (2015) Implementation of functional analysis using value analysis value engineering (VAVE). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10072-10076. ISSN 1819-6608

Mustafa, Yusri and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2015) Low temperature solder alloys for ultrasonic soldering of glass. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9717-9722. ISSN 1819-6608

Abdullah, Ainul Farahin and Adesta, Erry Yulian Triblas and Al-Fadhli, Fawaz M.K.H. (2015) Organising Value Analysis Value Engineering (VAVE) during New Product Development (NPD). ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10052-10057. ISSN 1819-6608

Hilmy, Irfan and Wahab, M. Abdel and Adesta, Erry Yulian Triblas and Mohamed Ariff, Tasnim Firdaus (2015) Damage detection based on the natural frequency shifting of a clamped rectangular plate model. Journal of Physics: Conference Series, 628. 012034-1. ISSN 1742-6588 (P), 1742-6596 (O)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2015) Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 104-108. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Al Fadel, Mohammad (2015) Modeling a conceptual framework for owner- contractor relationship and time–cost trade-off using fuzzy logic technique. In: 3rd International Conference on Advanced Computer Science Applications and Technologies – ACSAT2014, 29-30 Dec 2014, Amman- Jordan.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Shaffiar, Norhashimah and Seder, Amin M. F. and Riza, Muhammad (2015) Multi objective optimisation for high speed end milling using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 113-116. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Seder, Amin M. F. and Adesta, Erry Yulian Triblas and Taufik, Muhammad and Idris, Abdul Hadi (2015) Surface roughness prediction in high speed end milling using adaptive neuro-fuzzy inference system. Advanced Materials Research, 1115. pp. 122-125. ISSN 1022-6680

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Aini Nurrasyidah, Azhar and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of product architecture case study: multi purpose CNC router. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2014) Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2). pp. 431-436. ISSN 1970-8734

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Riza, Muhammad (2014) Heat generation performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 529 (2014). pp. 200-205. ISSN 1022-6680

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Azhar, Aini Nurrasyidah and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of a product architecture. Case study: multi purpose CNC router. In: IIUM Engineering Congress 2014, 23rd - 25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur, Malaysia. (Unpublished)

Hilmy, Irfan and Adesta, Erry Yulian Triblas (2014) Welding performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 446-47. pp. 660-664. ISSN 1660-9336

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) The economic impact of using negative rake angle in high speed hard turning. Journal of Advanced Science and Engineering Research, 3 (3). pp. 309-317. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul (2013) Tool life modeling in high speed turning of AISI 4340 hardened steel with mixed ceramic tools by using face central cubic design. International Review on Modelling and Simulations, 6 (4). pp. 1334-1338. ISSN 1974-983X (O), 1974-9821 (P)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and ., Muhammad Reza (2013) Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) Surface roughness modeling for CNC end milling using artificial neural network. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning. Journal of Advanced Science and Engineering Research, 3 (1). pp. 62-69. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hasan, Muhammed H (2013) Simulation of tool life for ceramic with negative rake angle using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013, 22-24 December 2013, Kuching, Sarawak.

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3

Adesta, Erry Yulian Triblas and Riza, Muhammad and Ali, Mohammad Yeakub (2012) Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials, 117-19. pp. 633-638. ISSN 1660-9336

Al Hazza, Muataz and Adesta, Erry Yulian Triblas and Superianto, M. Y. and Riza, Muhammad (2012) Cutting temperature and surface roughness optimization in CNC end milling using multi objective genetic algorithm. In: 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012, 26 - 28 November 2012, Kuala Lumpur.

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: analysis of surface roughness. Advanced Materials Research, 341/42. pp. 142-146. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan (2012) Power Consumption Optimization in CNC Turning Process Using Multi Objective Genetic Algorithm. Advanced Materials Research, 576. pp. 95-98. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Suprianto, Mohamad Yuhan and Riza, Muhammad (2012) Predicting surface roughness with respect to process parameters using Regression Analysis Models in end milling. Advanced Materials Research, 576. pp. 99-102. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Suprianto, M.Y and Riza, Muhammad (2012) Prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened H-13 steel in CNC end milling. Advanced Materials Research, 576. pp. 91-94. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and Mohammad Yuhan, Suprianto (2012) Surface roughness optimization in end milling using the multi objective genetic algorithm approach. Advanced Materials Research, 576. pp. 103-106. ISSN 1022-6680

Haruman, Esa and Yong, Sun and Triwiyanto, A. and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2012) An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. Journal of Materials Engineering and Performance, 21 (3). pp. 388-394. ISSN 1059-9495 (P)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and M.Y., Superianto (2012) prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened h-13 steel in CNC end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Edy Sutjipto, Agus Geter and Faris, Waleed Fekry and Adesta, Erry Yulian Triblas and Hanim, Hafizah (2011) Optimum KOH wet etching of cantilever tip for better image captured by nanoeducator. Applied Mechanics and Materials, 84-85. pp. 392-395. ISSN 1660-9336

Edy Sutjipto, Agus Geter and Triwiyanto, A and Aminanda, Yulfian and Fekry Faris, Waleed and Adesta, Erry Yulian Triblas (2011) Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85. pp. 557-561. ISSN 1660-9336

Haruman, Esa and Yong, Sun and Triwiyanto, Askar and Manurung, Yupiter H. P. and Adesta, Erry Yulian Triblas (2011) A feasibility study on low temperature thermochemical treatments of Austenitic Stainless Steel in Fluidized Bed Furnace. High Temp. Mater. Proc, 1-2. pp. 23-29. ISSN 0334-6455 (print); 2191-0324 (online)

A. R. , Fatimah Azreen and Sutjipto, Agus Geter Edy and Adesta, Erry Yulian Triblas (2011) Fabrication of CuSiC composite by powder metallurgy route. Advanced Materials Research, 264/65. pp. 748-753. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis. Advanced Materials Research , 264-5. pp. 1097-1101. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Machining Time Simulation in High Speed Hard Turning. Advanced Materials Research , 264-5. pp. 1102-1106. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) New approach in cost structuring of high speed hard turning. Advanced Materials Research, 264-26. pp. 1003-1008. ISSN 1662-8985

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Tool life in high speed turning with negative rake angle. Advanced Materials Research, 264. pp. 1009-1014. ISSN 1662-8985

Md. Azizan, Farihan and Purwanto, Hadi and Adesta, Erry Yulian Triblas and Mustafa, Mohd. Yusry (2011) Effect of Ag addition on mechanical properties of zinc-based alloy. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)

Aminanda, Yulfian and Edy Sutjipto, Agus Geter and Adesta, Erry Yulian Triblas and Castanie, Bruno (2011) Simulation of compression and spring back phenomena of sandwich structure with honeycomb core subjected to low energy and low velocity impact. Key Engineering Materials, 462-63. pp. 1296-1301. ISSN 1662-9795

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas, eds. (2011) Advanced machining process. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-162-8

Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub, eds. (2011) Advanced machining towards improved machinability of difficult-to-cut materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Zakaria, Ahmad Farhan and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 99-106. ISBN 9789674181758

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Casting investigation of heat treated biocompatible materials for total hip bone replacement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 151-160. ISBN 9789674181598

Amin, A. K. M. Nurul and Azhari, A. and Mahmud, Md. Asif (2011) Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 107-115. ISBN 9789674181758

Syed Meera, Zahir Hussain and Adesta, Erry Yulian Triblas (2011) Crashing a project in PERT/CPM network. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 91-98. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Mohamad Ashraf, Asfana Banu and Abdul Rahman Azmil, Nur Atiqah (2011) Critical chain in project management. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 239-245. ISBN 9789674181598

Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul, eds. (2011) Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181598

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 31-38. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232

Mohd Ali , Afifah and Adesta, Erry Yulian Triblas and Agusman, Delvis and Mohamad Badari, Siti Norbahiyah and Al Hazza, Muataz Hazza Faizi (2011) Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research, 4 (3). pp. 255-263. ISSN 1992-1454

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232

M., Norhidayah and H. M., Yupiter and J., Roseleena and A., Shaharudin and Adesta, Erry Yulian Triblas (2011) Development of virtual assembly layout with modeling languages approach and simulation using Delmia™ Quest®. IIUM Engineering Journal, 12 (6). pp. 9-20. ISSN 1511-788X

Mustafa, Mohd. Yusry and Adesta, Erry Yulian Triblas and Purwanto, Hadi and Md. Azizan, Farihan (2011) Development of zinc based alloy for solderability. In: International Conference in Mechanical & Manufacturing Engineering (ICME 2011), 6-8 June 2011, Putrajaya,Kuala Lumpur. (Unpublished)

Mushtaq, Umer and Adesta, Erry Yulian Triblas (2011) Effect of welding process on formability of tailor welded blanks. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 294-306. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) Effects of austempering treatment on mechanical properties of ductile iron. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 170-178. ISBN 9789674181598

Amin, A. K. M. Nurul and Chong , Chee and -, Sayedatul Akma (2011) Effects of scribing wheel dimensions on LCD glass cutting. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 259-265. ISBN 9789674181758

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 44-48. ISBN 9789674181628

Adesta, Erry Yulian Triblas and Shafie, Amir Akramin and Wan Yusoff, Wan Ahmad Yusmawiza, eds. (2011) High speed cutting: an approach towards improved machining performance. IIUM Press, Kuala Lumpur. ISBN 978-967-418-023-2

Suprianto, Mohamad Yuhan and Adesta, Erry Yulian Triblas (2011) High speed end milling in mould and die making. In: High Speed Cutting - An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 17-29. ISBN 978-967-418-023-2

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Improvement of typical hip-joint design for gripping and fixing. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 26-43. ISBN 9789674181598

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) In-Situ syntheses of high wear resistant coating reinforced Ti-6al-4v Matrix. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 173-179. ISBN 9789674181659

Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 33-37. ISBN 9789674181628

Adesta, Erry Yulian Triblas (2011) Manufacturing management: from basic machining to quality product. IIUM Press, Kuala Lumpur. ISBN 9789674181659

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) New tool life models in turning hardened steel AISI 4340 under high cutting speed. In: High Speed Cutting - An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 3-16. ISBN 978-967-418-023-2

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Adesta, Erry Yulian Triblas and -, Sharmila Fathima (2011) Quality management system: in light of project management. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 251-258. ISBN 9789674181659

Amin, A. K. M. Nurul and -, Kok and Mahmud, Md. Asif (2011) Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 49-56. ISBN 9789674181758

Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul (2011) Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 35-42. ISBN 9789674181758

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

A Hamzah, Nur Hanisah and Azmi, Nurhafizah and Adesta, Erry Yulian Triblas (2011) The development of cost estimation for quality assurance system in die-casting processes. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 72-83. ISBN 9789674181598

Adesta, Erry Yulian Triblas and Ahmed Ghazal, Belal (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 32-39. ISBN 9789674181659

Ahmed Ghazal, Belal and Adesta, Erry Yulian Triblas (2011) The effect of deep cryogenic treatment on the properties of AISI D2 tool steel. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 286-293. ISBN 9789674181598

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) The effect of stucco system in ceramic shell investment casting. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 139-149. ISBN 9789674181598

Mahmood, Mahmood Hameed and Adesta, Erry Yulian Triblas (2011) The project management challenges in technology innovation. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 231-237. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah and Wan Yusoff, Wan Ahmad Yusmawiza (2011) A surgical training model manufacture using fused deposition modeling. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 44-49. ISBN 9789674181598

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Riza, Muhammad and Agusman, Delvis and Rosehan, Rosehan (2010) Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research, 39 (2). pp. 265-278. ISSN 1450-202X E-ISSN 1450-216X

Mel, Maizirwan and Ihsan, Sany Izan and Adesta, Erry Yulian Triblas (2010) Biogas energy potential in Riau Indonesia. In: International Conference on Technology for New and Renewable Energy (ICT-NRE), 1 - 3 December, 2010, Jakarta Indonesia. (Unpublished)

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Adesta, Erry Yulian Triblas (2010) Extended enterprise: an extension to supply-chain practice for small to medium enterprise. Lambert Academic Publishing, Germany. ISBN 9783843378840

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2010) Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010, 8-9th April, 2010, London.

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Adesta, Erry Yulian Triblas and Iskandar, Idris and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Tasnim, Firdaus, eds. (2010) Materials Processing and Precision Engineering: series 1. Series 1 . Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia.

Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and ., Afzeri and Adesta, Erry Yulian Triblas (2010) Modeling electric field distribution on insulator under electron bombardment in vacuum. International Journal of Aerospace and Mechanical Engineering, 4 (4). pp. 192-195. ISSN 2010-3794 (O), 2010-3786 (P)

Adesta, Erry Yulian Triblas and Muhammad, Riza (2010) Performance of cermet tools : applying negative rake angles high speed machining. LAP Lambert Academic Publish GmbH & Co, Germany. ISBN 3843374783

Adesta, Erry Yulian Triblas and Hazza, Muataz and Riza, Muhammad (2010) The development of tool life estimation model based on volume loss method. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Muhammad, Riza and Suprianto, Mohamad Yuhan (2010) A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10). pp. 1420-1425. ISSN 1554-3641(O), 1546-9239 (P)

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2009) Tool life in high speed turning with negative rake angle. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur. (Unpublished)

Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and Adesta, Erry Yulian Triblas (2009) Modeling electric field distribution on insulator under electron bombardment in vacuum. In: Proceedings of World Academy of Science, Engineering and Technology.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Flank wear modeling in high speed turning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Machining time stimulating in high speed hard tuning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur. (Unpublished)

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X E-ISSN 1450-202X

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) The development of cost structuring of high speed hard turning. In: Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. (Unpublished)

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and ., Rosehan (2008) The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology, 1 (2). pp. 47-58. ISSN 1985-3785