IIUM Repository (IREP)

Prof. Dr. Meftah Hrairi

Department of Mechanical Engineering

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Ganat, Tarek A. and Hrairi, Meftah and Belladonna, Maulianda and Eghbal, Motaei (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer. pp. 1-15. ISSN 0947-7411 (In Press)
  2. Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters, 10 (2). pp. 18-27. ISSN 2180-1363
  3. Ali, Arafath and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2018) Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia. (Unpublished)
  4. Zakaria, Faiz and Hrairi, Meftah and Daoud, Jamal Ibrahim (2018) Multi-objective optimization of incremental sheet metal forming. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)
  5. Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)
  6. Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)
  7. Ganat, Tarek A. and Hrairi, Meftah (2018) Gas–liquid two-phase upward flow through a vertical pipe: influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). pp. 1-23. ISSN 1996-1073
  8. Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X
  9. Ganat, Tarek A. and Hrairi, Meftah (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 0920-4105
  10. Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed and Abuzaid, Ahmed (2018) Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development, 2018 (Special Issue). pp. 249-255. ISSN 2249-6890
  11. Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Hrairi, Meftah and Ismail, Ahmad Faris (2018) Desalination technologies: a critical review. International Journal of Engineering Technology and Scientific Innovation, 3 (4 (September-October)). pp. 160-186. ISSN 2456-1851
  12. Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890
  13. Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825
  14. Zyoud, Abdallah and Elfaki, Faiz A. M. and Hrairi, Meftah (2017) Parametric model based on imputations techniques for partly interval censored data. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.
  15. Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299
  16. Eshteyah, Mohanna Moh'd Saleem and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 86-93.
  17. Hrairi, Meftah (2017) 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016", 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur; Malaysia.
  18. Djemana, Mohamed and Hrairi, Meftah and Al Jeroudi, Yazan (2017) Using electromechanical impedance and extreme learning machine to detect and locate damage in structures. Journal of Nondestructive Evaluation, 36 (2). pp. 1-10. ISSN 0195-9298
  19. Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
  20. Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Comparative study of R134a and R744 driven solar assisted heat pump systems for different applications. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 July 2016, Kuala Lumpur; Malaysia.

Most Viewed Items

Item titleViews
1Signal analysis of vibration measurements for condition monitoring of bearings1448
2Development of an adaptive headlamp system1432
3Research and progress in incremental sheet forming processes1381
4Penang bridge 1 loading analysis using British standard and finite element method for structural health monitoring1362
5Modeling the powder compaction process using the finite element method and inverse optimization 1330
6Design and modeling of silicon MEMS accelerometer1291
7Process simulation and quality evaluation of incremental sheet forming1258
8Signal analysis of vibration measurements for condition monitoring of bearings1217
9Finite element investigatigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process1213
10Cooling of motorcyclist helmet with thermoelectric module1162
11An Integrated approach of ethics and professional issues into engeneering curriculum.1159
12Mixed-convection heat transfer from simulated air-cooled electronic devices: experimental and numerical study 1130
13Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy1124
14Towards automatic testing and defect recognition in magnetic particle inspection1090
15Design and optimization of a micro capacitive pressure sensor1081
16Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties1078
17Risk analysis factors of the emission in transportation a case study - Dubai taxi1076
18Design and modelling of silicon MEMS accelerometer1062
19Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization1039
20Predicting density distribution in green compacts using finite element simulations1025
21Comparison of diesel emission experiments in view of the environment: a case study at Dubai1022
22Detection of foreign bodies in canned foods using ultrasonic testing1013
23Detection of foreign bodies in canned foods using ultrasonic testing1011
24An investigation of temperature effect on incremental forming1003
25Predicting density distribution in Green compacts using finite element simulations998
26Efficient cryogenic cooling during machining of rolled AISI 4340 steel974
27Finite element modeling of the powder compaction process. 972
28Edge-cracked bimaterial systems under thermal heating968
29Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components948
30Development of automatic magnetic particle system for automotive parts inspection942