Comparative study on the performance of zta cutting tool with the addition of different particle size of mgo additive

Mudzaffar, Raqibah Najwa and Mohd Khairy, Hanani Hani and Mohd Zaki, Nur Khairunisa and Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Rejab, Nik Akmar and Mohd Ali, Afifah (2020) Comparative study on the performance of zta cutting tool with the addition of different particle size of mgo additive. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

	PDF - Published Version Restricted to Registered users only Download (351kB) | Request a copy
Preview	PDF (SCOPUS) - Supplemental Material Download (305kB) | Preview

Abstract

This paper investigated the performance of ZTA cutting tool with the addition of different particle size of MgO additive. Therefore, the objective of this research is to compare the effects of machining parameters on tool wears of ZTA cutting tools added with micro and nanoparticle of MgO. The experiments were conducted using BridgePort-Romi Powerpath CNC machine using a tool holder Sandvik Coromant (CoroTurn CCLNR 164D-4) to hold the cutting tools properly. The parameters are set up as cutting speeds used between range 354 to 472 m/min, feed rate from 0.1 to 0.5 mm/rev with a constant depth of cut of 0.2 mm. Three types of wear were analyzed which are flank wear, crater wear and tool chipping. Flank wear and crater wear images captured using measuring microscope (NIKON MM-400/L) and the crater wear areas are analyzed using MatLab programming software. Tool chipping is observed via SEM (JEOL JSM-5600). The experimental result shows that flank wear and crater wear increase when cutting speed and feed rate increase. ZMN cutting tool shows lower value of flank wear at 0.143 mm and 3.741 mm2 for crater wear than ZMM, 0.321 mm and 3.808 mm2 respectively. On the contrary, cutting speed did not affect the tool chipping severely as feed rate. Moreover, ZMN also shows that the tool breakage occurred severely than ZMM due to the high load on the tool nose.

Item Type:	Conference or Workshop Item (Plenary Papers)
Additional Information:	6954/83679
Uncontrolled Keywords:	Comparative study, Performance of zta, cutting tool, Different particle size, mgo additive
Subjects:	T Technology > TJ Mechanical engineering and machinery
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Engku Norulizati Engku Aziz
Date Deposited:	23 Dec 2020 12:11
Last Modified:	21 Dec 2021 15:00
URI:	http://irep.iium.edu.my/id/eprint/83679

Actions (login required)

View Item