Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Othman, Raihan and Ahmad Azhar, Ahmad Zahirani and Mohamed, Mohd Ambri and Herman, Sukreen Hana (2015) Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method. In: 4th International Conference on Electronic Devices, Systems and Applications 2015 (ICEDSA), 14th - 15th December 2014, Kuala Lumpur.

	PDF - Published Version Restricted to Registered users only Download (1MB) | Request a copy
Preview	PDF Download (471kB) | Preview

Abstract

DRAM has been approaching its maximum physical limit due to the demand of smaller size and higher capacity memory resistor. The researchers have discovered the abilities of a memristor, a Non Volatile Memory (NVM) that could overcome the size and capacity obstacles. This paper discussed about the deposition of zinc oxide (ZnO) on indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrate by electrodeposition. Metallic Zn film was deposited on substrates with varying deposition time from 15 to 120 seconds in very dilute zinc chloride (ZnCl2) aqueous and subsequently oxidized at 150C to form ZnO/ITO coated PET junction. The deposited thin film was characterized via x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The results from I-V measurement show the deposited ZnO exhibits pinched hysteresis loop. The hysteresis loop becomes smaller with increasing deposition time. The 15 seconds electrodeposition gave the largest hysteresis loop and largest value of resistive switching ratio of 1.067. The result of the synthesized ZnO on the flexible substrate can be one of the alternatives to replace the current memory system as the flexible memory system.

Item Type:	Conference or Workshop Item (Invited Papers)
Additional Information:	4583/48239 IOP Conf. Series: Materials Science and Engineering 99 (2015) 011001 doi:10.1088/1757-899X/99/1/011001
Subjects:	T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials of engineering and construction
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Dr Mohd Hanafi Ani
Date Deposited:	20 Jan 2016 11:40
Last Modified:	14 Dec 2017 11:02
URI:	http://irep.iium.edu.my/id/eprint/48239

Actions (login required)

View Item