Comparative and optimization studies of adsorptive strengths of activated carbons produced from steam- and CO2-activation for BPOME treatment

Amosa, Mutiu K. and Jami, Mohammed Saedi and Al-Khatib, Ma'an Fahmi Rashid and Jimat, Dzun Noraini and Muyibi, Suleyman Aremu (2014) Comparative and optimization studies of adsorptive strengths of activated carbons produced from steam- and CO2-activation for BPOME treatment. Advances in Environmental Biology, 8 (3). pp. 603-612. ISSN 1995-0756

	PDF Restricted to Repository staff only Download (627kB) | Request a copy
Preview	PDF (SCOPUS) Download (142kB) | Preview

Abstract

This study basically compared the adsorptive efficacies of powdered activated carbons (PACs) produced from palm empty fruit bunches (EFB) in the treatment of a non-simulated biotreated palm oil mill effluent (BPOME). Each of the PACs was produced from two different methods namely steam- and CO2-activation routes. This test was performed with the main aim of obtaining an appropriate activated carbon suitable for the treatment of BPOME. The steam activated PAC was found to possess higher adsorptive strength as compared with that of CO2 activation with the operating conditions of 150 rpm agitation for 60 min with varying dosage of PAC from 0.5 – 5.0 g. The steam activated PAC performed better than the CO2 activated PAC with a record uptake of up to 81%, 92% and 89% for Chemical Oxygen Demand (COD), Manganese (Mn) and Hydrogen Sulfide (H2S) respectively as compared with the uptake of 67%, 90% and 87% from the CO2-activated PAC. Furthermore, a 2-level full factorial design of experiment was utilized to assess the effects of three factors on adsorption. The highest removal efficiencies for COD, Mn and H2S were found to be 83.1%, 93.6% and 89.8% at adsorbent dosage 5 g, agitation speed 200 rpm and contact time 60 min.

Item Type:	Article (Journal)
Additional Information:	5545/37005
Uncontrolled Keywords:	Activated Carbon, Steam and CO2 Activation, Adsorption, Dissolved Gases, Organics and Inorganics
Subjects:	T Technology > TP Chemical technology > TP155 Chemical engineering
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering
Depositing User:	Prof. Ir. Dr. Mohammed Saedi Jami, PhD CEng MIChemE
Date Deposited:	20 Jun 2014 15:51
Last Modified:	02 May 2024 12:37
URI:	http://irep.iium.edu.my/id/eprint/37005

Actions (login required)

View Item