IIUM Repository

TIG melted surface modified titanium alloy for cylinder liner application

Adeleke, S. A. and Maleque, Md. Abdul (2015) TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies, 4 (3). pp. 130-138. ISSN 2146-9067

[img] PDF - Published Version
Restricted to Repository staff only

Download (453kB) | Request a copy

Abstract

Tungsten inert gas (TIG) surface modification with Fe-based alloy can give protection against wear and corrosion of metallic component material. In this study, an attempt has been made to explore deposition of Fe-based alloy on commercial purity titanium (CP-Ti) by TIG torch melting process to improve resistance of substrate to wear. Three different powder blends with nominal composition of 97Fe2C1Si, 94Fe 4C2Si and 91Fe6C3Si were separately melted on CP-Ti using a conventional TIG welding torch produced at 100 A and energy input 1350 J/mm. Analysis of the results showed that TIG torch produced melt pools geometry with good metallurgical bonding with the substrate. The melt microstructures consisted of variety of different TiC precipitates. Pores were conspicuously seen on the melt microstructure modified with highest carbon content. Both micro hardness and wear resistance showed a significant improvement particularly after TIG coating with 94Fe4C2Si. Thus, it appears that an optimized composition of TIG coated with 94Fe4C2Si was best to control abrasive resistance and for the application of cylindrical liner.

Item Type: Article (Journal)
Additional Information: 6103/49712
Uncontrolled Keywords: Surface modification, TIG, Cylinder liner, Fe-based alloy and Commercial purity titanium (CP-Ti)
Subjects: T Technology > T Technology (General) > T173.2 Technological change
T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials of engineering and construction
T Technology > TN Mining engineering. Metallurgy > TN600 Metallurgy
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User: Prof Dr. Md Abdul Maleque
Date Deposited: 19 Feb 2016 15:11
Last Modified: 04 Mar 2020 10:57
URI: http://irep.iium.edu.my/id/eprint/49712

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year