IIUM Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA165 Engineering instruments, meters, etc. Industrial instrumentation"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type
Number of items at this level: 38.

Article

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115. pp. 517-522. ISSN 1022-6680

Aibinu, Abiodun Musa and Salami, Momoh Jimoh Emiyoka and Shafie, Amir Akramin (2011) A novel signal diagnosis technique using pseudo complex-valued autoregressive technique. Expert Systems with Application, 38 (8). pp. 9063-9069. ISSN 0957-4174

Almertejy, Ali and Rashid, Muhammad Mahbubur and Ali, Naser and Almurtaji, Salah (2022) Application of nanofluids in gas turbine and intercoolers—a comprehensive review. Nanomaterials, 12 (338). pp. 2-70. ISSN 2079-4991

Chen, Tianlu and Tian, Gui Yun and Sophian, Ali and Que, Pei Wen (2008) Feature extraction and selection for defect classification of pulsed eddy current NDT. NDT & E International , 41 (6). 467 - 476. ISSN 0963-8695

Edwards, R.S. and Sophian, Ali and Dixon, S. and Tian, G.-Y. and Jian, X. (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E International , 39 (1). 45 - 52. ISSN 0963-8695

Edwards, R.S. and Sophian, Ali and Dixon, S. and Tian, G.Y. (2008) Data fusion for defect characterisation using a dual probe system. Sensors and Actuators A: Physical , 144 (1). 222 - 228. ISSN 0924-4247

Embong, Abd Halim and Akbar, Muhammad Ali and Rashid, Muhammad Mahbubur (2019) Design and development of Multipurpose Educational and Research Platform (MERP) for learning control & IOT technologies. Journal of Engineering Science and Technology (JESTEC), 14 (2). pp. 747-762. ISSN 1823-4690

Inami, Nobuhito and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2008) Device characteristics of carbon nanotube transistor fabricated by direct growth method. Applied Physics Letters, 92 (24). ISSN 0003-6951

Mamat, Ahmad Fadhli and Mohd. Hussain, Mohd. Ramzi and Tukiman, Izawati and Rabe, Noor Suzilawati and Muda, Rahsidi Sabri and Md Amin, Mohamad Faiq (2020) Utilization of unmanned aerial vehicle (UAV) in dam disaster management: evacuation planning. International Journal of Technology Management and Information System, 2 (4). pp. 51-62. E-ISSN 2710-6268

Mansor, Hasmah and Mohd Noor, Samsul Bahari and Raja Ahmad, Raja Kamil and Taip, Farah Saleena and Lutfy, Omar Farouq (2010) Intelligent control of grain drying process using fuzzy logic controller. Journal of Food, Agriculture & Environment, 8 (2). pp. 145-149. ISSN 1459-0263 (O), 1459-0263 (P)

Mat Nawi, Mohd Nazir and Alzaghir, Abdullah Faisal and Husin, Hafiz and Gebremariam, M. A. and Azhari, Azmir (2023) Effect of waterjet cleaning parameters during paint removal operation on automotive steel components. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 31-38. E-ISSN 2636-9575

Rana, M. M. and Mohd Razib, Mohd Ashraf and Saleh, Tanveer and Abdul Muthalif, Asan Gani (2015) Development of an angle sensor using optical polarizer. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17416-17420. ISSN 1819-6608

Rashid, Muhammad Mahbubur and Safie, Amir Akramin and Bin Alamgir, Tarik and Ibrahim, Jawad Alfar (2012) Design and Implementation of Fuzzy Based Person Following Mobile Robot1. Applied Mechanics and Materials. ISSN 1660-9336

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Shahimi, Sharis-Shazzali and Abdullah, Nur Azam and Hrairi, Meftah and Topa, Ameen and Ismail, Ahmad Faris (2022) Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density. IIUM Engineering Journal, 23 (1). pp. 412-423. ISSN 1511-788X E-ISSN 2289-7860

Sophian, Ali and Nafiah, Faris and Gunawan, Teddy Surya and Mohd Yusof, Nur Amalina and Al-Kelabi, Ali (2021) Machine-learning-based evaluation of corrosion under insulation in ferromagnetic structures. IIUM Engineering Journal, 22 (2). pp. 226-233. ISSN 1511-788X E-ISSN 2289-7860

Sophian, Ali and Tian, Gui Yun and Taylor, David and Rudlin, John (2003) A feature extraction technique based on principal component analysis for pulsed Eddy current {NDT}. NDT & E International , 36 (1). 37 - 41. ISSN 0963-8695

Sophian, Ali and Tian, Gui Yun and Zairi, Sofiane (2006) Pulsed magnetic flux leakage techniques for crack detection and characterisation. Sensors and Actuators A: Physical , 125. pp. 186-191. ISSN 0924-4247

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115. pp. 539-542. ISSN 1022-6680

Tian, Gui Yun and Sophian, Ali (2005) Defect classification using a new feature for pulsed eddy current sensors. NDT & E International , 38 (1). 77 - 82. ISSN 0963-8695

Tian, Gui Yun and Sophian, Ali (2005) Reduction of lift-off effects for pulsed eddy current NDT. NDT & E International , 38 (4). 319 - 324. ISSN 0963-8695

Zubir, Nazira and Pushpanathan, K and Mat Noor, N.A (2016) Optical thermal imaging for breast cancer diagnosis. International Journal of Engineering Invention (IJEI), 5 (9). pp. 1-10. ISSN 2319-6491 E-ISSN 2278-7461

Proceeding Paper

Bhuiyan, Md. Moinul Islam and Alamgir, Tarik Bin and Rashid, Muhammad Mahbubur (2013) Development and optimization of a low normal force contact. In: 16th International Conference on Advances in Materials & Processing Technologies, 22-26 Sept 2013, Taiwan.

Bhuiyan, Md. Moinul Islam and Haga, Yoichi and Makishi, Wataru and Esashi, Masayoshi (2003) Development of optical switch using SMA coil and magnetic latch. In: IEICE General Conference, Mar 2003, Japan.

Bhuiyan, Md. Moinul Islam and Rashid, Muhammad Mahbubur and Ahmed, Sayem and Bhuiyan, Munira and Kajihara, Masanori (2013) Design and fabrication stable LNF contact for future IC application. In: IIUM Engineering Congress 2013 (ICOM '13), 2-4 Jul 2013, Berjaya Times Square Hotel, Kuala Lumpur. (Unpublished)

Bhuiyan, Md. Moinul Islam and Rashid, Muhammad Mahbubur and Alamgir, Tarik Bin and Bhuiyan, Munira and Kajihara, Masanori (2013) MEMS and EFF Technology based micro connector for future miniature devices. In: IIUM Engineering Congress 2013 (ICOM '13), 2-4 Jul 2013, Berjaya Times Square Hotel, Kuala Lumpur. (Unpublished)

Bhuiyan, Moinul and Muhammad , Muaz (2014) Development of robotic arm plotter for disable people. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur. (Unpublished)

Bhuiyan, Moinul and Mustaffa Kamal, Dzul Asyraff Firdhaus (2014) Design and development of a smart window blind controlling system. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur.

Bhuiyan, Moinul and Takemasa, Eiichiro (2009) A low normal force contact using photolithography and Ni-Co electro fine forming technology. In: TE-Japan Technical Conference, 14 May 2009, Kawasaki, Japan.

Djemana, Mohamed and Hrairi, Meftah (2023) Real-time structural damage detection using EMI under varying load a and temperature conditions. In: 7th International Conference on Technology, Engineering and Science, IConTES 2023, 16-19 November 2023, Antalya/Turkey.

Hazumi, Hazman and Ayob, Mohd Fairullazi and Md. Sharif, Harlina (2018) Creating a new normal for AFM services: 3D laser scanning to BIM for LCC application on built asset. In: The 3rd National Asset and Facility Management Convention (NAFAM 2018), 8th-9th Oct. 2018, Kuala Lumpur. (Unpublished)

O. Mohamed, Omar Buseif and Wahid, Azni Nabela (2024) Parametric study on bundled shape memory alloy coils for application in active compression garment. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.

Pham, Duc Trung and Shwe, S. and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and -, Farizahani (2011) Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science, 2011, united kingdom. (Unpublished)

Tahmasebpour, Kamyar and Shobaki, Mohammed M. and Hrairi, Meftah (2013) Design and optimization of a micro capacitive pressure sensor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2012) Fabrication of surgical cranioplasty biomodel using fused deposition modeling. In: 2012 International Conference on Innovation Management and Technology Research (ICIMTR), 21 - 22 May 2012, Malacca, Malaysia.

Monograph

Zubir, Nazira (2015) Electrochemical biosensor : amperometric – glucose sensor. Technical Report. UNSPECIFIED. (Unpublished)

Zubir, Nazira (2016) Setting up a new Radiology Center Technology for improvement : Data mining (Image Mining Technique). Other. UNSPECIFIED. (Unpublished)

Zubir, Nazira and Mat Noor, Nina Azurainie and Pushpanathan, Kalananthni (2016) Tendon bioreactor. Technical Report. UNSPECIFIED. (Unpublished)

This list was generated on Thu Dec 19 06:59:43 2024 +08.