Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2020

Group by: Creator/Author | Item Type | No Grouping

Jump to: A | B | C | D | F | H | I | J | K | M | N | O | P | R | S | T | U | Y | Z

Number of items: 105.

A

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Ismail, Azwa Azmariza and Zainudin, Nur Amanina (2020) An experimental investigation on drilling of aluminum alloy (Al 7075) using high speed steel cutting tools. TEST: Engineering & Management, 83 (May-June). 1451 -1456. ISSN 0193-4120

Abd Malek, Zetty Akhtar and Rahman, Md Mustafizur and Kadirgama, Kumaran and Rahman, Saidur and Maleque, Md. Abdul (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879

Abdul Latiff, Abdul Somad and Musa, Mukhtaruddin and Anhar, Zaki and Illias, Suhaimi and Ani, Mohd Hanafi (2020) Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Abdullahi, Umma and Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub and Nirmal, Umar (2020) Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering, 27 (1). pp. 25-35. ISSN 0794-4756 E-ISSN 2705-3954

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2020) Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings, xx (xx). pp. 1-5. E-ISSN 2214-7853 (In Press)

Abuhamed, Nader and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Effects of halloysite nanotubes (HNT) structures on antimicrobial activity on TPSS Film. Malaysian Journal of Microscopy, 16 (2). pp. 119-127. ISSN 1823-7010, E-ISSN 2600-7444

Adebisi, Adetayo A. and Maleque, Md. Abdul and Bello, Kamilu Adeyemi (2020) Interface study of SiCp/6061Al composite. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 456-461. ISBN 978-0-12-813196-1

Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Hasham, Rosnani and Hafiz Idris, Mohamad Khairul (2020) Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers, 12 (8). pp. 1-11. E-ISSN 2073-4360

Ahmad, Zuraida (2020) Safer sanitary pads made from palm starch. Asia Research News, 6th May 2020.

Ahmad Saidi, Muhammad Akmal and Hassan, Azman and Wahit, Mat Uzir and Choy, Lai Jau and Anuar, Hazleen (2020) Thermal, dynamic mechanical analysis and mechanical properties of polybutylene terephthalate/polyethylene terephthalate blends. Jurnal Teknologi (Sciences & Engineering), 82 (5). pp. 73-83. E-ISSN 2180–3722

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2020) Estimating suitable starch extraction from mango seeds using analytical hierarchy process (AHP) method. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

Al Hazza, Muataz Hazza F. and Ali, Mohammad Yeakub and Omer, T.M. and Juraimi, N. A and Adesta, Erry Yulian Triblas (2020) Flank wear prediction in high-speed face milling using Monte Carlo simulation method. In: 5th North American International Conference on Industrial Engineering and Operations Management, 10th-14h August 2020, Detroit, MI, USA.

Al-Khatib, Ma'an Fahmi Rashid and Abdullah Sidek, 'Atiah (2020) The IIUM river of life flagship project. In: Spirituality and sustainability: experiences of the International Islamic University Malaysia. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 138-159. ISBN 9789674910488

AlAzemi, Ahmed S KH R Q and Che Daud, Mohd Radzi (2020) Preventive maintenance for effective operation of boilers in Kuwait industry. International Journal of Mechanical and Production Engineering Research and Development, 10 (2). pp. 987-1002. ISSN 2249–6890 E-ISSN 2249–8001

Ali, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Dannoun, Elham M.A and Mohammed, Sewara J. and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan (2020) Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap. Scientific Reports, 10 (1). pp. 1-17. E-ISSN 2045-2322

Ali, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi and Ali, Fathilah and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) Effect of freeze-dried durian skin nanofiber on the physical properties of poly(lactic acid) biocomposites. Polymer Composite. ISSN 0272-8397 E-ISSN 1548-0569 (In Press)

Anhar, Zaki and Musa, Muktaruddin and Illias, Suhaimi and Ani, Mohd Hanafi (2020) A review of current prediction methods for slagging and fouling in Malaysian coal fired power plants. Test Engineering & Management, 83 (May-June). pp. 1411-1418. ISSN 0193-4120

Ani, Mohd Hanafi and Azman, M. A. F. and Musa, Mukhtaruddin and Anhar, Zaki and Abdul Hamid, Abd. Malek (2020) High temperature cathodic protection of Fe-Cr alloy. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..

Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Anuar, Hazleen (2020) Durian skin biocomposite for take-out containers and 3D printing. Asia Research News, 27th Jan. 2020.

Anuar, Hazleen (2020) Employing circular economy on offshore D&A via life cycle assessment. In: Industry Meets Academia: Decommissioning & Abandonment Webinar Series, 22nd July 2020, Kuala Lumpur, Malaysia.. (Unpublished)

Anuar, Hazleen and Mohd Apandi, Siti Nur E’zzati and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Buys, Yose Fachmi and Manshor, Mohd Romainor and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal, 21 (1). pp. 212-227. ISSN 1511-788X E-ISSN 2289-7860

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hannaf, Riyadh Ali Abdullah and Hilmy, Irfan (2020) A design consideration of heated bed's rapid levelling tool based on von misses stress using FEA simulation. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 February - 9 April 2020, Dubai; United Arab Emirates.

Ariff, Tasnim Firdaus and Al-Qwairi, Osamah Omar (2020) Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding. TEST Engineering and Management, 83 (May – June 2020). 1446 -1450. ISSN 0193-4120

Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2020) A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11th - 14th December 2019, Bangkok, Thailand.

Azmy, Udaimatunnoor and Ahmad, Zuraida and Ahmad Shahrim, Nur’Aishah Ahmad and Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola (2020) Effects of silver nanoparticles concentration on resistivity of PEDOT: PSS thin conductive films. Test Engineering and Management, 83 (May - June 2020). pp. 1008-1013. ISSN 0193-4120

Azwan, Muhammad and Maleque, Md. Abdul and Rahman, Mohammad Mustafizur (2020) TIG Torch melting as surface engineering technology. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, UK, pp. 629-637. ISBN 978-0-12-813196-1

Azzmer, S. and Jaafar, H. and Tajul, Liyana and Sulaiman, Mohd Hafis and Zainal Abidin, Zailani (2020) Crack detection on sheared-edge of ultra-high strength steel sheet by using acid immersion. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

B

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Konneh, Mohamed (2020) Stability of micro dry wire EDM: OFAT and DOE method: OFAT and DOE method. International Journal of Advanced Manufacturing Technology, 106 (9-10). pp. 4247-4261. ISSN 02683768

Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Adebisi, Adetayo A. (2020) Processing of ceramic composite coating via TIG torch welding technique. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 523-535. ISBN 978-0-12-813196-1

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology and hydrolytic degradation behavior of polylactic acid / thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology, and hydrolytic degradation behavior of poly lactic acid/thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

C

Chang, Hsueh-Hsien and Yang, Chuan Choong and Lee, Wei-Jen (2020) Fault location identification in power transmission networks using novel non-intrusive fault monitoring systems. In: 56th IEEE Industrial & Commercial Power Systems (I&CPS) Technical Conference, 29th June - 28th July 2020, Las Vegas, Nevada, United States of America.

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2020) An investigation of hole quality during drilling of carbon fibre reinforced plastic and titanium (Ti6Al4V) using tungsten carbide drills. In: UNSPECIFIED.

Daud, Rosdi and A., Asyraf and Hassan, Mas Ayu and A., Shah and Tomadi, Dr. Siti Haryani (2020) Investigation on pullout strength between different design of cannulated pedicle screw and osteoporosis bones to obtain an optimum design. TEST Engineering & Management, 83 (May/June). pp. 1097-1103. ISSN 0193-4120

Daud, Rosdi and Almor, A. A. and Hassan, Mas Ayu and M. Safwan, M. Safwan and Shah, A and Tomadi, Siti Haryani (2020) Design optimization of lightweight lower control arm using finite element method. Test Engineering & Management, May - June 2020. pp. 1285-1291. ISSN 0193-4120

Daud @ Ab Aziz, Nur Sofwati and A. Raof, Natasha and Ghani, Abdul Rahman and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2020) Cutting tool performance in turning of AL 7075-t651 aluminium alloy. IIUM Engineering Journal, 21 (2). pp. 177-185. ISSN 1511-788X E-ISSN 2289-7860

F

Fajingbesi, Fawwaz Eniola and Azman, Amelia Wong and Ahmad, Zuraida and Olanrewaju, Rashidah Funke and Ibrahimy, Muhammad Ibn and Mohd. Mustafah, Yasir (2020) Low cost piezoresistive pressure sensor matrix for pressure ulcer prevention and management. In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019, 30th–31st October 2019, Putrajaya.

Fuhaid, Mutlag Shafi and Krishnan, Pradeep Kumar and Maleque, Md. Abdul and Murali, R V and Ali, Mohammad Yeakub (2020) Manufacturing and friction welding of aluminium matrix composites – review of current status and future directions. TEST Engineering & Management, 83 (May-June). pp. 1122-1130. ISSN 0193-4120

H

Halim, Zahurin and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2). pp. 112-118. ISSN 1823-7010 E-ISSN 2600-7444

Hossain, Mohammad Sayeed and Maleque, Md. Abdul (2020) Residual stress analysis for sustainable structural integrity assessment of an engineering component. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier Inc., United Kingdom, pp. 548-556. ISBN 978-0-12-813196-1

Hussin, Muhammad Shaffiq and Ali, Mohammad Yeakub and Banu, Asfana and Abdul Rahman, Mohamed and Chowdhury, Md. Sazzad Hossien (2020) Investigation of vibration in micromilling with MQL: S/N ratio analysis. TEST Engineering & Management, 83 (May-June). pp. 1026-1032. ISSN 0193-4120

I

Ismail, Nur Ishami Faqihah and Sulaiman, Sarina and Othman, Maizatulnisa and Kabbashi, Nassereldeen Ahmed and Sulaiman, Siti Zubaidah (2020) Synthesis of aluminum chloride hexahydrate/polyvynil alcohol catalyst for biodiesel production. In: 3 rd International Conference on Separation Technology 2020 (ICoST 2020), 15th August 2020, Skudai, Johor. (Unpublished)

J

Jamhari, Fathin Illiana and Ahmad, Zuraida and Tajuddin, Maisarah and Abuhamed, Nader (2020) Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management, 83 (May-June). pp. 1014-1019. ISSN 0193-4120

Johari, Nor Hasnidawani and Hassan, Noor Azlina (2020) Surface roughness of ZnO-SiO2 nanocoating. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019 (RCND 2019), 25th-26th November 2019, Kuala Lumpur.

Johari, Norhasnidawani and Hassan, Noor Azlina (2020) Effect of ZnO-SiO2 nanoparticles on the morphology of nanocoating. Test Engineering and Managemant, 83. pp. 1215-1218. ISSN 0193-4120

K

Kays, H. M.Emrul and Karim, A. N.Mustafizul and Che Daud, Mohd Radzi (2020) A responsive multiplicative Holt-Winters approach for enhanced forecasting accuracy. International Journal of Industrial and Systems Engineering, 35 (1). pp. 1-12. ISSN 1748-5037 E-ISSN 1748-5045 (In Press)

Khamis, Siti Salwa and Purwanto, Hadi and Mohd Salleh, Hamzah and Abd. Rahman, Mohamed and Rozhan, Alya Naili (2020) New approach of Municipal Solid Waste (MSW) leachate treatment using hydrothermal method. TEST Engineering & Management, 83. pp. 1117-1121. ISSN 0193-4120

M

Mahmood, M. H. and Maleque, Md. Abdul and -, Suryanto (2020) Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management, 83 (May-June). pp. 1180-1185. E-ISSN 0193-4120

Mahmood, M.H. and Maleque, Md. Abdul (2020) Anodized nano-coating of copper material for thermal efficiency enhancement. Test Engineering and Management, 83 (May-June). pp. 1430-1437. E-ISSN 0193-4120

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2020) Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE), xx (xx). pp. 1-5. ISSN 2193-567X E-ISSN 2191-4281 (In Press)

Maleque, Md. Abdul (2020) Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). Policy Paper. Department of Standards Malaysia, Cyberjaya, Selangor.

Maleque, Md. Abdul (2020) A systematic literature review. In: Webinar on Sytematic Literature Review, 22nd September 2020, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Azwan, M. K. and Muhammad M., Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Azwan, Muhammad and Afiq, Muhammad M. (2020) Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering, 14 (3). pp. 366-372. ISSN 1872-2121 E-ISSN 2212-4047

Maleque, Md. Abdul and Idris, Nazrin and Rahman, Mohammad M. and Sayeed Hossain, Mohammad (2020) Particulate composite protective coating using conventional melting approach. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 510-516. ISBN 9780128035818

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2020) The effect of cutting parameters on tool wear in drilling aluminium 7075. TEST Engineering & Management, 83 (May-June). pp. 1274-1280. ISSN 0193-4120

Mohamad, Nur Lisa Farhana and Ali, Fathilah and Azmi, Azlin Suhaida and Barre, Mohamed Soleiman and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Enhanced flexibility of polylactic acid/epoxidized palm oil/pineapple fiber composites. Biological And Natural Resources Engineering Journal, 3 (1). pp. 1-7. E-ISSN 2637-0719

Mohamed Haneef, Intan Najwa Humaira and Buys, Yose Fachmi and Shaffiar, Norhashimah and Haris, Nurul Assadiqah and Abdul Hamid, Abdul Malek and Syed Shaharuddin, Sharifah Imihezri (2020) Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11). pp. 2876-2886. ISSN 0032-3888 E-ISSN 1548-2634

Mohd Daud, Farah Diana and Ahmad, Nurul Amirah Izzati and Mahmud, Mudrikah Asif and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) Two-step synthesis of ca-based MgO hybrid adsorbent for pontential CO2 capturing application. In: Materials Science Forum. Trans Tech Publications Ltd, Kuantan, Pahang, pp. 369-374. ISBN 978-303571664-1

Mohd Daud, Farah Diana and M.Azmy, Nur Aishah and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) Preparation of nanosilica powder using rice husk via precipitation method. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar; Malaysia.

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). pp. 234-244. ISSN 1511-788X E-ISSN 2289-7860

Mohd Yusoff, Marmeezee and Mamat, Mohamad Hafiz and Abdullah, Mardhiah and Ismail, Ahmad Syakirin and Malek, Mohd Firdaus and Zoolfakar, Ahmad Sabirin and Al Junid, Syed Abdul Mutalib and Abu Bakar, Suriani and Mohamed, Azmi and Ahmad, Mohd Khairul and Shameem Banu, Itreesh Basha and Rusop, Mohamad (2020) Coupling heterostructure of thickness-controlled nickel oxidenanosheets layer and titanium dioxide nanorod arrays via immersionroute for self-powered solid-state ultraviolet photosensor applications. Measurement: Journal of the International Measurement Confederation, 149. pp. 1-11. ISSN 0263-2241 E-ISSN 1873-412X

Mohd Zaki, Hafizah Hanim and Mohd Sobri, Nur Azemuzahir and Abdullah, Jamaluddin and Sarifuddin, Norshahida and Mohd Daud, Farah Diana (2020) Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar; Malaysia.

Mohd Zaki, Hafizah Hanim and Mohd Sobri, Nur Azemuzahir and Abdullah, Jamaluddin and Sarifuddin, Norshahida and Mohd Daud, Farah Diana (2020) Characterization of NiTi shape memory alloy sintered at different temperatures in reducing environment. Materials Science Forum, 1010. pp. 632-637. ISSN 1662-9752

Mokhtar, Suhaily and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) A review on the application of various MQL base in metal cutting operation of aluminum alloys. Test Engineering and Management, May-June 2020. pp. 1168-1174. ISSN 0193-4120

Mokhtar, Suhaily and Yusof, Nur Syahira Sofyani and Mohd Asri, Mohd Ashraff and Che Haron, Che Hassan and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) Effects of drilled area temperatures on drilling of NFRP composites: a review. TEST Engineering & Management, 83 (May – June 2020). 1314 -1321. ISSN 0193-4120

Mudzaffar, Raqibah Najwa and Mohd Khairy, Hanani Hani and Mohd Zaki, Nur Khairunisa and Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Rejab, Nik Akmar and Mohd Ali, Afifah (2020) Comparative study on the performance of zta cutting tool with the addition of different particle size of mgo additive. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

Musa, M. H. A. and Maleque, Md. Abdul and Hossain, M.S. and Ravishankar, S.R. and Al-Shiblib, A. and Coyle, E.D. (2020) Evaluation of sustainable micro-alloyed HSLA steel for pipeline application. In: International Gas Research Conference 2020 (IGRC 2020), 24-26 Feb 2020, Muscat, Oman. (Unpublished)

Musa, Moh H.A. and Md. Abdul, Maleque and Ali, Mohammad Yeakub (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 780128131954

Musa, Moh HA and Maleque, Md. Abdul and Y Ali, Mohammad (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 978-0-12-813196-1

Musa, Mukhtaruddin and Purwanto, Hadi and Abdul Razak, Rajabi and Othman, Raihan and Musa, Lukman and Ani, Mohd Hanafi (2020) Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

N

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2020) Preparation of eco-friendly Fe2VAl-based thermoelectric materials using cast iron scrap chips as a source material. Materials Transactions, 61 (11). pp. 2216-2221. ISSN 1345-9678

Nordin, Norhuda Hidayah and Mohamad, Faiz Syazwan and Jamal, Nur Ayuni (2020) Non-isothermal crystallization kinetics of a rapidly solidified as-cast TiZrHfNiCu high entropy bulk metallic glass. World Journal of Engineering and Technology, 8. pp. 280-295. ISSN 2331-4222 E-ISSN 2331-4249

O

Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen and Mohd Nasir, Nur Aimi (2020) Chemical and rheological properties effects from different parameters in horizontal agitator bead mill process on sulfur dispersion. International Journal of Advanced Science and Technology, 29 (9s). pp. 1665-1672. ISSN 2005-4238 E-ISSN 2207-6360

Osman, Muhammad Naqib and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh (2020) Substrate placement inside CVD tube for graphene production. In: Materials Science Forum. Trans Tech Publications Ltd, Kuantan, Malaysia, pp. 84-91. ISBN 978-303571664-1

P

Paijan, Lailatul Harina and Maleque, Md Abdul and -, Suryanto (2020) Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management, 83 (May-June). pp. 1392-1397. ISSN 0193-4120

Prabowo, Herry Agung and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2020) Total productive maintenance implementation’s barriers and enablers in Indonesian manufacturing companies. In: 2020 Advances in Science and Engineering Technology International Conferences, ASET 2020, 4 Feb.-9 April 2020, Dubai, United Arab Emirates.

R

Razali, Muhammad Sufi Iqbal and Hassan, Norita and Hassan, Noor Azlina (2020) Effects of Epoxidized Palm Oil (EPO) on mechanical properties of Polyhydroxyalkanoates (PHA). TEST Engineering & Management, 83 (May – June 2020). pp. 1438-1455. ISSN 0193-4120

Rosman, Nur Afiqah and Illias, Suhaimi and Hussain, Suhaila and Ashrul Ishak, Mohamad Shaiful and Ani, Mohd Hanafi (2020) Experimental investigation of critical heat flux during impact of a droplet onto hot horizontal surface. International Journal of Emerging Trends in Engineering Research, 8 (5). pp. 1663-1666. ISSN 2347-3983

S

Safiei, Wahaizad and Rahman, Md Mustafizur and Musfirah, A. H. and Maleque, Md Abdul and Singh, Ramvir (2020) Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019), 30th-31st July 2019, Kuantan, Pahang.

Sahir, Nurul Nadiah and Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani and Surip, Siti Norasmah (2020) Effect of solid particles concentration to the size of graphene oxide liquid crystals pickering emulsion. TEST Engineering & Management, May -June 2020. pp. 1087-1092. ISSN 0193-4120

Samat, Noorasikin and Mohd Zaki, Hafizah Hanim and Manshor, Hanisah and Abd Malek, Mohamad Ashraff Danial and Ramli, Fatin Umaidah (2020) AMSERU. [Copyright] (Unpublished)

Samat, Noorasikin and Sarifuddin, Norshahida and Shafiee, Muhd Izzudin (2020) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. Test Engineering and Management, 83. pp. 25906-259009. ISSN 0193-4120

Sarifuddin, Norshahida (2020) TRIBOLOGICAL PROPERTIES OF HYBRID COMPOSITES BASED ON WOVEN CARBON FIBER/FINE KENAF FABRIC REINFORCED EPOXY MATRIX FOR AUTOMOTIVE APPLICATION. Project Report. UNSPECIFIED. (Unpublished)

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82. 8255 -8263. ISSN 0193-4120

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5). pp. 866-874. E-ISSN 0038-111X

Sulaiman, Mohd Hafis (2020) Evaluation of lubricant performance in sheet metal forming. In: Webinar: Tribology as a basis in Condition Base Monitoring, 27th August 2020, Kuala Lumpur. (Unpublished)

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Environmental-friendly tribological and lubrication in manufacturing processes. In: 4th International Conference on Sustainable Materials (e-ICoSM) 2020), 3rd September 2020, Pahang. (Unpublished)

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Tribology of Composite Materials and Coatings in Manufacturing. In: Tribological Applications of Composite Materials. Springer, Singapore, pp. 283-308.

Syed Shaharuddin, Sharifah Imihezri and Fauzan, Amirul Akmal and Mohamad Jazi, Mohamad Faris Izzudin and Mohd Akhir, Nur Atiqah and Othman, Maizatulnisa and Muhamad Khairussaleh, Nor Khairushima and Shaffiar, Norhashimah and Hassan, Zaimah (2020) Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2). pp. 197-211. ISSN 1511-788X E-ISSN 2289-7860

T

Tomadi, Siti Haryani and Mokhtar, Suhaily and Hassan, Mas Ayu and Daud, Rosdi (2020) Prediction of cutting force by using finite element method in end-milling of AISI 1018 medium carbon steel. TEST Engineering and Management, May – June 2020. 1067 -1071. ISSN 0193-4120

Tuan Rohadi, Tuan Nurain and Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis (2020) Isolation and characterisation of cellulose from cortex, pith and whole of the Pennisetum purpureum: Effect of sodium hydroxide concentration. Journal of Materials Research and Technology, 9 (6 (Nov-Dec)). pp. 15057-15071. ISSN 238-7854/

U

Urmi, Wajiha Tasnim and Rahman, Md. Mustafizur and Wan Hamzah, Wan Azmi and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2020) Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879

Y

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohamad Badari, Siti Norbahiyah and Mohd Ali, Afifah and Ismail, Hanafi (2020) Tensile and flexural properties of woven carbon-kenaf fiber reinforced epoxy matrix hybrid composite: effect of hybridization and stacking sequences. In: 3rd International Postgraduate Conference on Materials, Minerals and Polymer (MAMIP 2019), 31st Oct - 1st Nov. 2019, Penang.

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah (2020) A review on kenaf fiber hybrid composites: mechanical properties, potentials, and challenges in engineering applications. Progress in Rubber, Plastics and Recycling Technology, Early Access. pp. 1-18. ISSN 1477-7606 E-ISSN 1478-2413 (In Press)

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah and Ismail, Hanafi and Mohamad, Siti Norbahiyyah (2020) Effect of stacking sequences on mechanical properties of kenaf hybrid composites. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar; Perlis.

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Mohd Ali, Afifah and Mohd Daud, Farah Diana and Mohamad Badari, Siti Norbahiyah (2020) A comparative study on mechanical properties of carbon and Kenaf composites via vacuum infusion technique. Journal of Engineering Science, 16 (1). pp. 97-107. ISSN 2180-4214

Z

Zainal, Muhammad Talhah and Mohd Yasin, Mohd Fairus and Wan Ali, Wan Fahmin Faiz and Tamrin, Khairul Fikri and Ani, Mohd Hanafi (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi‐empirical approach. Carbon Letters, Early Access. pp. 1-11. ISSN 1976-4251 E-ISSN 2233-4998

Zaini, Ahmad Syahir and Sulaiman, Sarina and Mel, Maizirwan and Othman, Maizatulnisa and Sulaiman, Siti Zubaidah (2020) An overview: analysis of ultrasonic-assisted extraction’s parameters and its process. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019@ Kuala Lumpur), 29 Oct – 1 Nov 2019, Kuala Lumpur.

Zamzuri, Ahmad Syahmi and Ayob, Nur Idayu and Abdullah, Yusof and Hasbullah, Nurul Fadzlin (2020) Effect of irradiation upon single layer graphene on SiO2/Si substrate using electron beam irradiation (EBI). In: 4th Advanced Materials Conference 2018, 27-28 Nov 2018, Kuching, Malaysia.

Zamzuri, Ahmad Syahmi and Ayob, Nur Idayu and Abdullah, Yusof and Saidin, Nur Ubaidah and Che Hak, Cik Rohaida (2020) Electrical behavior of Graphene/SiO2/Silicon material irradiated by electron for Field Effect Transistor (FET) applications. Materials Science Forum, 1010. pp. 339-345. ISSN 1662-9752

Zetty Akhta, A. M. and Rahman, Md Mustafizur and Kadirgama, Kumaran and Maleque, Md. Abdul (2020) Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. In: "Energy Security and Chemical Engineering Congress 2019, ESChE 2019", 17 - 19 July 2019, Parkroyal Resort Penang.

This list was generated on Thu Dec 19 04:10:05 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0