Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2017

-

-, Suryanto and Haider, Farag and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Modelling and optimization of copper electroplating adhesion strength. IOP Conference Series: Materials Science and Engineering, 204 (012017). pp. 1-5. ISSN 1757-899X

A

Abd Halim, Nor Farah Huda and Ascrofta, Helen and Barnes, Stuart (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: Advances in Material and Processing Technologies Conference (AMPT 2017), 11th December 2017-14th December 2017, Chennai, India.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Khairuddin, Amir Saddam (2017) Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Rosli, Abdul Rahman Shah and Banu, Asfana (2017) Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X

Adeleke, S.A. and Bushroa, A.R and Sopyan, Lis (2017) Characteristic features of plasma electrolytic treated layers in Na3PO4 solution. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.

Adeleke, Sakiru Adekunle and Bushroa, Abdul Razak and Sopyan, Lis (2017) Recent development of calcium phosphate based coating on titanium alloy implants. Surface Engineering and Applied Electrochemistry, 53 (5). pp. 419-433. ISSN 1068-3755 E-ISSN 1934-8002

Adesta, Erry Yulian Triblas and Agusman, Delvis and Avicenna, Avicenna (2017) Internet of Things (IoT) in agriculture industries. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 5 (4). pp. 376-382. ISSN 2089-3272

Adesta, Erry Yulian Triblas and Alazemi, Yahya (2017) Integrated engineering project management Approach for typical small to medium manufacturing companies. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 541-545. ISSN 2502-4752 E-ISSN 2502-4760

Adesta, Erry Yulian Triblas and Riza, Muhammad and Avicenna, Avicenna (2017) Content comparative investigation on tool wear during end milling of AISI H13 steel with different tool path strategies. Bulletin of Electrical Engineering and Informatics, 6 (4). pp. 327-333. ISSN 2302-9285

Ahmad, Zuraida and Tajuddin, Maisarah and Wan Mohd Yusof, Wan-Shazlin Maisarah (2017) Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science, 29 (4). pp. 485-492. ISSN 0128-1283

Ahmad Azhar, Ahmad Zahirani and Mokhtar,, Mokhzani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Effects of TiN single layer coating on the wear of ZTA cutting inserts and surface roughness of workpiece. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2016, 17-18 August, 2016, Dorsett Hotel, Putrajaya.

Al Hazza, Muataz Hazza Faizi and Abu Bakar, Any Nabila and Adesta, Erry Yulian Triblas and Taha, Assem Hatem (2017) Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad and Hasim, Siti Fatihah and Che Daud, Mohd Radzi (2017) A study on capabilities of different electrode materials during electrical discharge machining (EDM). IIUM Engineering Journal, 18 (2). pp. 189-195. ISSN 1511-788X E-ISSN 2289-7860

Ali, Maisarah and Oladokun, Majeed and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini and Ibrahim, Md Najib (2017) CFD investigation of indoor hygrothermal and airflow profile in academic research storage room: effect of lma on thermohygric balance and mould growth. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3080-3087. ISSN 1819-6608

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Zunairi, Siti Nur Zuhaida and Banu, Asfana (2017) Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Ali, Mohammad Yeakub and Jailani, Wan Norsyazila and Abd Rahman, Mohamed and Hassan, Muhammad Hasibul and Banu, Asfana (2017) Effect of minimum quantity lubrication on surface roughness in tool-based micromilling. IIUM Engineering Journal, 18 (1). pp. 147-154. ISSN 1511-788X E-ISSN 2289-7860

Ali, Mohammad Yeakub and Khamarruzaman, Siti Nur Zalikha and Banu, Asfana (2017) Investigation of kerf in micro wire electro discharge machining. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Anuar, Hazleen and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Mohd Apandi, Siti Nur E’zzati and Abd Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshir, Mohd. Romainor (2017) Impregnation of cinnamon essential oil into plasticised polylactic acid biocomposite film for active food packaging. Journal of Packaging Technology and Research, 1 (3). pp. 149-156. ISSN 2520-1034 E-ISSN 2520-1042

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Hamzah, Mohd. Salleh and Iis, Sopyan (2017) Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of Pakistan Academy of Sciences: B. Life and Environmental Sciences, 54 (B) (1). pp. 59-64. ISSN 2518-4261 E-ISSN 2518-427X

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Mohd Salleh, Hamzah and Sopyan, Iis (2017) Different oxidation treatments on polystyrene (PS) microspheres by using an ultraviolet/ozone (UVO3)system. Proceedings of Pakistan Academy of Sciences, 54 (1B). pp. 59-65. ISSN 2518-4261 E-ISSN 2518-427X

Arifin, Mohd Azmir and Mel, Maizirwan and Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Mohd. Salleh, Hamzah and Sopyan, Iis (2017) Different oxidation treatments on polystyerene (PS) microspheres by using an ultraviolet/ozone (UVO3) system. Proceedings of the Pakistan Academy of Sciences: B. Life and Ennvironmental Sciences, 54 (1B). pp. 55-59. ISSN 2518-4261 E-ISSN 2518-427X

Arifin, S. K. and Abdul Hamid, Abd. Malek and Berahim, Ahmad Nukhaie and Ani, Mohd Hanafi (2017) Effects of water vapor on protectiveness of Cr2O3 scale at 1073 k. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

B

Bahar, Rubina and Ariff, Tasnim Firdaus and Ismail, Yusof (2017) Investigation of polarization in membrane distillation (MD) process and its energy efficient solution for freshwater production in Malaysian households. Project Report. UNSPECIFIED. (Unpublished)

Bonnia, Noor Najmi and Redzuan, Aein Afina and Surip, Siti Norasmah and Hassan, Noor Azlina (2017) Mechanical properties of toughened polyester reinforced with untreated and treated kenaf hybird carbon composite. In: International Conference on Frontiers of Composite Materials (ICFCM 2016), 19-21 November 2016, Auckland, New Zealand.

C

Che Murad, Mardziah and Masdek, Nik Rozlin and Hyie, Koay Mei and Sopyan, Lis (2017) Physicochemical characteristics of magnesium hydroxyapatite (MgHA) derived via wet precipitation method. Journal of Mechanical Engineering, SI 4 (5). pp. 209-216. ISSN 1823-5514

E

Elbishari, Elhassan M Y and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2017) An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

F

F, Farah Alia and Kurniawan, Tedi and Ani, Mohd Hanafi and Nandiyanto, Asep Bayu Dani (2017) The effect of temperature on the chromizing process for Ferritic-Martensitic steel. In: 1st International Conference on Materials Physics and Mechanics 2017, MPM 2017, 22-23 July 2017, Langkawi; Malaysia.

F, Farah Alia and Kurniawan, Tedi and Asmara, Yuli Panca and Ani, Mohd Hanafi and Nandiyanto, Asep Bayu Dani and UNSPECIFIED (2017) High temperature oxidation in boiler environment of chromized steel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1-2 Aug 2017, Kuantan, Pahang.

Fargana, A and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2017) Equiconvergence in summation associated with elliptic polinomial. In: Proceedings of the 4th International Conference of Mathematical Applications in Engineering 2017, 8th-9th August 2017, Kuala Lumpur.

Fidrusli, Azreen and Suryanto, Suryanto and Mahmood, Mahmood Hameed (2017) Ginger extract as green corrosion inhibitor of mild steel in hydrochloric acid solution. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

H

H, Lailatul and Maleque, Md. Abdul (2017) Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Hablee, Sufiamie and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md Mujibur and Singh, Ramesh Kishore (2017) Novel injectable calcium phosphate bone cement from wet chemical precipitation method. In: 2nd International Conference on Materials Engineering and Nanotechnology, ICMEN 2017, 12-14 May 2017, Kuala Lumpur; Malaysia.

Halim, Zahurin and Ahmad, Zuraida and Sharif, Safian and Kalam, Anizah (2017) Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. Project Report. UNSPECIFIED. (In Press)

Hamdan, A B and Suryanto, Suryanto and I. Haider, Farag (2017) Study on tea leaves extract as green corrosion inhibitor of mild steel in hydrochloric acid solution. In: International Conference on Chemistry and Material Science (IC2MS) 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics, 37. pp. 455-466. ISSN 1126-8042

Huzaifah, M. R.M. and Mohd Sapuan, Salit and Leman, Z. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul (2017) A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4). pp. 678-698. ISSN 1573-6105 E-ISSN 1573-6113

I

Ibrahim, Nur Asmawiyah and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Asman, Asyfiq Hanif (2017) Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture, 2 (2). pp. 25-30. E-ISSN 0128-1852

Ismail, Edhuan and Sirat, Mohd Shukri and Abdul Hamid, Abdul Malek and Othman, Raihan and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Synthesis of large-area few-layer graphene by open-flame deposition. Sains Malaysiana. ISSN 0126-6039

J

J.N., Hasnidawani and H. Noor, Azlina and Hassan, Norita and Samat, Noorasikin and Bonnia, Noor Najmi and Surip,, Siti Norasmah (2017) ZnO nanoparticles for anti-corrosion nanocoating of carbon steel. Materials Science Forum, 894. pp. 76-80. ISSN 1662-9752

Jarin, Sams and Saleh, Tanveer and Asan Gani, Abdul Muthalif and Ali, Mohammad Yeakub (2017) An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8-11 Nov 2016, Kuala Lumpur.

Jarin, Sams and Saleh, Tanveer and Bhuiyan, Moinul and Muthalif, Asan G. A. and Ali, Mohammad Yeakub (2017) An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing, 27th-30th March 2017, Kaohsiang, Taiwan.

K

Kahar, A.M.W. and Sarifuddin, Norshahida and Ismail, Hanafi (2017) Structural, thermal and physico‑chemical properties of high density polyethylene/natural rubber/modified cassava starch blends. Iranian Polymer Journal, 26 (2). pp. 149-159. ISSN 1026-1265 E-ISSN 1735-5265

Kahlib, Nor Amyra Zulianey and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2017) Synthesis and characterization of silica ceramic membranes via sol-dip coating. Journal of Advanced Research in Materials Science, 39 (1). pp. 1-7. ISSN 2289-7992

Khalid, Khalisanni and Mohd Noh, Muhammad Azri and Khan, M. Niyaz and Ishak, Ruzaina and Penney, Esther and Chowdhury, Zaira Zaman and Hamzah, Mohammad Hafiz and Othman, Maizatulnisa (2017) Giant Vesicles (GV) in colloidal system under the Optical Polarization Microscope (OPM). Micron, 100. pp. 30-33. ISSN 0968-4328

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Integration of lean manufacturing and quality management system through structural equation modeling. International Journal of Productivity and Quality Management, 20 (4). pp. 534-556. ISSN 1744-6482 E-ISSN 1746-6474

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2017) Perspectives on sustainability integration in the organization's DNA. Noor Publishing. ISBN 9783330852556

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) Critical success factors for soft TQM and lean manufacturing linkage. Jordan Journal of Mechanical and Industrial Engineering, 11 (2). pp. 129-140. ISSN 1995-6665

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) A comparative evaluation of contemporary models for lean manufacturing practices. International Journal of Services and Operations Management, 28 (1). pp. 26-45. ISSN 1744-2370 E-ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Rahman, Mohammad Mustafizur and Che Daud, Mohd Radzi (2017) Examining the impact of lean manufacturing on soft TQM practices and sustainable performance: evidence from Malaysian Industries. In: 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017, 11th-13th April 2017, Rabat, Morocco.

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Konneh, Mohamed and Bagum, Mst Nasima and Amin, Akm Nurul M.Nurul and Asyah, Amira Fatin (2017) Investigation of heat assisted high speed end milling of soda lime glass for surface generation. In: 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE), 23-24 November 2016, Petaling Jaya, Selangor, Malaysia.. (In Press)

Konneh, Mohamed and Bagum, Mst. Nasima and Mohamed Ariff, Tasnim Firdaus and Yeakub Ali, Mohammad (2017) Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Kourra, Nadia and Warnett, Jason and Attridge, Alex and Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart and Williams, Mark and UNSPECIFIED (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. ISSN 0268-3768 E-ISSN 1433-3015

L

Lailatul, P.H. and Maleque, Md. Abdul (2017) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Material & Processing Technologies Conference, Chennai, India.

Lazim, Nurul Hakimah and Samat, Noorasikin (2017) Effects of irradiated recycled polypropylene compatibilizer on the mechanical properties of microcrystalline cellulose reinforced recycled polypropylene composites. In: Advances in Material & Processing Technologies Conference 2016 (AMPT 2016), 8th-11th November 2016, Kuala Lumpur.

M

M. H. A, Musa and Maleque, Md. Abdul and Ali, M. Y. (2017) Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Mahmood, Mahmood Hameed and ,, Suryanto and Hazza Faizi Al Hazza, Muataz and Haider I., Farag (2017) Study the influence of the anodizing process parameters on the anodized copper hardness. In: 1st International Conference on Composite Material, Polymer Science and Engineering, CMPSE 2017, 24-25 June 2017, University of ToyamaToyama; Japan.

Mahmood, Mahmood Hameed and -, Suryanto and Al Hazza, Muataz Hazza Faizi (2017) The effects of water flow rate on copper corrosion. Key Engineering Materials, 748. pp. 235-239. ISSN 1662-9795

Maleque, Md. Abdul (2017) Hot rolled alloy steel wire rod for pre-stressed steel - Specification. Other. DSM, KL.

Maleque, Md. Abdul (2017) Materials processing technology with Islamic perspective. In: KOE Islamization Seminar, 26 May 2017, KOE Islamization Office. (Unpublished)

Maleque, Md. Abdul (2017) Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,, 1st Aug. 2017, Concorde Hotel Shah Alam. (Unpublished)

Maleque, Md. Abdul (2017) Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017), 16th-17th August 2017, Genting Highlands, Pahang. (Unpublished)

Maleque, Md. Abdul (2017) TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017), 10th-12th October 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul (2017) Writing a high impact research paper. In: Seminar/Talk at Faculty of Science & Technology, University of Mostaganem Algeria, 9th Oct. 2017, Mostaganem, Algeria. (Unpublished)

Maleque, Md. Abdul and , W. Saffina and Ahmed, A. S and Ali, M. Y. (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur.

Maleque, Md. Abdul and Adebisi, Adetayo Abdulmumin and Zainal, Nur Izzati (2017) Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering, 184. 012031-1. ISSN 1757-8981 E-ISSN 1757-899X

Maleque, Md. Abdul and Afiq, M. (2017) Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Bello, K A and Adebisi, A A and Dube, A (2017) Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Bello, K. A. (2017) Noble hybrid composite coated low alloy steel for high temperature applications. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Adebisi, Adetayo Abdulmumin and -, Normaizatul Akma (2017) Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th Feb. 2017, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina (2017) Modified surface of duplex stainless steel using tig torch and diffusion techniques. In: Malaysia Technology Expo (MTE 2017), 16th-18th February 2017, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina (2017) Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017, 7th-11th August 2017, Kuala Lumpur. (Unpublished)

Manshor, Hanisah and Abdullah, Ezzat Chan and Ahmad Azhar, Ahmad Zahirani and Yeo, Wee Sing and Ahmad, Zainal Arifin (2017) Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: the effects on microstructure and properties. Journal of Alloys and Compounds, 722. pp. 458-466. ISSN 0925-8388

Md. Idriss, A. N and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2017) Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology. ISSN 0267-0836 E-ISSN 1743-2847

Moghadam, Marcel and Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) Acoustic emission monitoring of the bending under tension test. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-22nd September 2017, Cambridge, United Kingdom.

Mohamed Haider, Farag I. and ,, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Evaluation of the effects of copper electroplating parameters on the adhesion using response surface methodology. Applied Mechanics and Materials, 864. pp. 121-126. ISSN 1662-7482

Mohammad, Yeakub Ali and Farhana, Sulaiman and Banu, Asfana and Mohamed, Abd. Rahman and Al Hazza, Muataz Hazza Faizi (2017) Investigation of accuracy in microdrilling with minimum quantity lubrication. In: 7th International Conference on Manufacturing Science and Technology (ICMST 2016), 16th-18th July 2016, Sarawak.

Mohammed, M. I. and Sulaeman, Erwin and Mustapha, F. (2017) Dynamic response for structural health monitoring of the Penang (I) cable-stayed bridge. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak, Kuala Lumpur..

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah and Dorah, Norasimah and Raja Seman, Raja Noor Amalina and Ani, Mohd Hanafi and Sirat, Mohd Shukri and Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop (2017) Review—Critical considerations of high quality graphene synthesized by plasma-enhanced chemical vapor deposition for electronic and energy storage devices. ECS Journal of Solid State Science and Technology, 6 (6). M3035-M3048. ISSN 2162-8769 E-ISSN 2162-8777

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Abdullah, Norazharuddin Shah and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. Materials Science Forum, 888. pp. 108-111. ISSN 1662-9752

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Shah Abdullah, Norazharuddin and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. In: International Conference of X-Ray and Related Techniques 2016 (ICXRI 2016), 17th-18th August 2016, Dorsett Hotel, Putrajaya.

Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis and Khasri, Azduwin (2017) The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites. Plastics, Rubber and Composites, 46 (10). pp. 421-430. ISSN 1465-8011 E-ISSN 1743-2898

Mohd Radzi, H.C.D. (2017) FORMULATION OF SLOW RELEASE COMPRESSED FERTILIZER AND INITIAL DESIGN FOR PRODUCTION SYSTEM. Project Report. UNSPECIFIED. (Unpublished)

Mohd. Yusoff, Marmeezee and Mamat, Mohamad Hafiz and Mahmood, Mohamad Rusop (2017) Synthesis of titanium dioxide nanorod arrays using a facile aqueous sol-gel route for ultraviolet photosensor applications. In: Recent applications in sol-gel synthesis. IntechOpen, pp. 131-150. ISBN 978-953-51-3245-5

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi (2017) Evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates. Journal of Mechanical Engineering, SI 3 (1). pp. 149-169. ISSN 1823-5514 E-ISSN 5520-164X

Muhamad Khairussaleh, Nor Khairusshima (2017) NOVEL METHOD OF USING CHILLED AIR MACHINING ON UNIDIRECTIONAL CARBON FIBER REINFORCED PLASTIC FOR LONG TERM USAGE OF SOLID CARBIDE CUTTING TOOL. Project Report. UNSPECIFIED. (Unpublished)

Muhamad Khairussaleh, Nor Khairusshima and Ali Kutty, Nurul Aqella and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference (AMPT 2016), 8th-11th November 2016, Kuala Lumpur, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Optimization of milling carbon fibre reinforced plastic under chilled air machining. Advances in Material & Processing Technologies. ISSN 1877-7058 (In Press)

Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2017) Study on tool wear during milling CFRP under dry and chilled air machining. Procedia Engineering, 187. pp. 78-89.

Musa, Hussin Abdullrhman and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2017) Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Musa, Mukhtarudin and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Othman, Raihan and Ani, Mohd Hanafi (2017) Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7). pp. 6237-6241. ISSN 1936-6612 E-ISSN 1936-7317

N

Nasry, Nasrul Ashraf and Mahmud, Khairus Syakirah and Hilmy, Irfan and M. I., Ismail and Hassan Basri, Rodziah (2017) Implementation of lean manufacturing to blend with good manufacturing practice at Minda Tulus Industries Sdn. Bhd. for improved performance. In: 3rd National Conference on Knowledge Transfer (NCKT'16), 30th Nov.-1st Dec. 2016, Pulau Pinang.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Lafia-Araga, Ruth Anayimi (2017) Electro-discharge machining of Ti-6AI-4V alloy using Cu-TaC compact electrode with urea dielectric: Reactions and their effects on the machined surface. In: 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), 3rd February-6th February 2017, Cape Town, South Africa.

Nor Hairin, Assayidatul Laila and Othman, Raihan and Rizal, Faireez and Mohd Daud, Farah Diana (2017) Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent. International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue, Special issue. pp. 493-498. ISSN 2581-4311

O

Oladokun, Majeed and Ali, Maisarah and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini and Salleh, Md. Noor (2017) CFD investigation of indoor hygrothermal performance in academic research storage room: Measurement and validation. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3130-3136. ISSN 1819-6608

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017), 28th-30th Aug. 2017, Kuala Lumpur.

Paijan, Lailatul Harina and Maleque, Md. Abdul (2017) Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017), 16th-19th Oct. 2017, Melaka.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ibrahim, Shaliza and Mohamed Ariff, Tasnim Firdaus (2017) Enhanced freshwater production using finned-plate air gap membrane distillation (AGMD). In: 2016 International Symposium on Civil and Environmental Engineering, ISCEE 2016, 5-6 December 2016, Novotel Melaka,.

R

Razali, Nurul Nadirah and Sopyan, Iis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md. Mujibur and Singh, Ramesh (2017) Effect of Poly(Vinyl Alcohol) addition on the properties of hydrothermal derived calcium phosphate cement for bone filling materials. In: 2nd International Conference on Materials Engineering and Nanotechnology (ICMEN2017), 12-14 May 2017, Kuala Lumpur.

S

Sahari, Japar and Sapuan, S.M. and Zainudin, E.S. and Ishak, Mohamad Ridzwan and Maleque, Md. Abdul and Zuhri, Mohd Y M and Akhtar, Riaz (2017) Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)). pp. 227-232. ISSN 1570-1794 E-ISSN 1875-6271

Sahid, N.S.M. and Rahman, Md. Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Maleque, Md. Abdul (2017) Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3913-3926. ISSN 2229-8649 E-ISSN 2180-1606

Saleh, Tanveer and Bahar, Rubina (2017) ELID grinding and EDM for finish machining. In: Comprehensive materials finishing. Reference module in materials science and materials engineering, 1 . Elsevier Inc., pp. 364-407. ISBN 978-0-12-803249-7

Samat, Noorasikin and Lazim, Nurul Hakimah and Motsidi, Siti Nor Rasyidah and Hassan, Noor Azlina (2017) Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. Materials Science Forum, 894 (4). pp. 62-65. ISSN 1662-9752

Samat, Noorasikin and Sabaruddin, Fatimah Atiyah and Meor Yusoff, Meor Sulaiman and Abang Ismawi Hassim, Dayang Habibah (2017) Evaluation of waste from aluminum industry as filler in Polypropylene composites. The Journal of The Minerals, Metals & Materials Society, 69 (4). pp. 790-795. ISSN 1047-4838 E-ISSN 1543-1851

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Hamzah, Mohd. Salleh and Nordin, Norshariza and Iis, Sopyan and Jimat, Dzun Noraini (2017) Statistical optimization of gelatin immobilisation on modified surface of PCL microcarrier to improve its compatibility. Jurnal Teknologi, 79 (6). pp. 167-175. E-ISSN 2180-3722

Samsudin, Nurhusna and Hashim, Yumi Zuhanis Has-Yun and Arifin, Mohd Azmir and Mel, Maizirwan and Mohd. Salleh, Hamzah and Nordin, Norshariza and Sopyan, Iis and Jimat, Dzun Noraini (2017) Statistical optimization of gelatin immobilization on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi, 79 (6). pp. 167-175. ISSN 2180-3722

Sirat, Mohd Shukri and Ismail, Edhuan and Purwanto, Hadi and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana, 46 (7). pp. 1033-1038. ISSN 0126-6039

Sopyan, Lis and Pusparini, Erlani and Subramaniam, Ramesh T. and Tan, Chou Yong and Ching, Yernchee and Wong, Yinhow and Zainal Abidin, Nor Ishida and Chandran, Hari and Ramesh, S. and Bang, Lethi (2017) Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds. Ceramics International, 43 (15). pp. 12263-12269. ISSN 0272-8842

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on the impact process parameters on tensile strength using 3d printer repetier-host software. ARPN Journal of Engineering and Applied Sciences, 12 (102). pp. 3341-3346. ISSN 1819-6608

Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) The Influence of tool texture on friction and lubrication in strip reduction testing. Lubricants, 5 (3). pp. 1-11. ISSN 2075-4442

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) Influence of tool texture on friction and lubrication in strip reduction. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-21st September 2017, Cambridge, United Kingdom.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) A study of DLC coatings for ironing of stainless steel. In: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming, 2nd-6th July 2017, Munich, Germany.

T

Taha, Assem Hatem and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Modelling and analysing deadlock in flexible manufacturing system using timed petri net. International Journal of Engineering Materials and Manufacture, 2 (1). pp. 11-15. ISSN 0128-1852

Tajuddin, Maisarah and Ahmad, Zuraida and Ahmad, Roszalia and Halim, Zahurin (2017) Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE), 3. pp. 11-18. ISSN 0128-1003

Tajuddin, Maisarah and Ahmad, Zuraida and Halim, Zahurin and Maleque, Md Abd and Ismail, Hanafi and Sarifuddin, Norshahida (2017) Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016, 27th–29th January 2016, Penang, Malayia.

W

Wan Ibrahim, Wan Mohd Khairi and Abdul Rahman, Mohamed and Abu Bakar, Mohd Rushdi (2017) Implementing lean manufacturing in Malaysian small and medium startup pharmaceutical company. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza (2017) The application of scanning electron microscope and melt flow index for orange peel in laser sintering process. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 615-622. ISSN 2502-4752

Y

Yusof, N.S.B. and Sapuan, S.M. and Sultan, M.T.H. and Jawaid, M. and Maleque, Md. Abdul (2017) Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)). pp. 129-144. ISSN 0870-8312

Z

Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Zakaria, Mohd Nazarudin and A.R., Sukirah and Othman, Maizatulnisa and Jamal, Nur Ayuni and Khalid, Khalisanni and Ramli, Rosmamuhammadani (2017) Effect of growth times on the physical and mechanical properties of hydrophobic and oleophilic silylated bacterial cellulose membranes. In: 3rd Electronic And Green Materials International Conference 2017 (EGM 2017), 29th–30th April 2017, Krabi, Thailand.