Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2016

.

., Avicenna and Jimat, Dzun Noraini and Mohd Salleh, Hamzah and Anuar, Hazleen (2016) Effect of fungal pretreatment by Aspergillus niger assisted by ultrasonication on microfibrillated cellulose obtained from cocoa pod husk. Journal of Advanced Research in Material Sciences, 21 (1). pp. 1-13. ISSN 2289-7992

A

A. Ghani, Jaharah and A. Raof, Natasha and Che Haron, Che Hassan and Junaidi, Syarif (2016) TRIZ approach for machining process innovation in cryogenic environment. International Journal of Materials and Product Technology, 53 (3-4). pp. 286-297. ISSN 0268-1900 E-ISSN 1741-5209

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi and Abdul Hadi, Musfirah (2016) Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool. International Journal of Simulation Modelling, 15 (2). pp. 201-212. ISSN 1726-4529

ANR, Reddy and Saleh, A. A. and Islam, Md. Saiful and Hamdan, S. and Maleque, Md. Abdul (2016) Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1). pp. 334-343. ISSN 0887-0624 E-ISSN 1520-5029

Abd Halim, Nor Farah Huda and Ascroft, Helen and Barnes, Stuart (2016) Machinability study of ultrasonic assisted machining (UAM) of carbon fibre reinforced plastic (CFRP) with multifaceted tool. In: 7th CIRP Conference on High Performance Cutting 2016, 31st May-2nd June 2016, Chemnitz; Germany.

Abdul Malek, Norun and Mohd. Ramly, Athirah and Abdullah Sidek, 'Atiah and Mohamad, Sarah Yasmin (2016) Characterization of acrylonitrile butadiene styrene material for a 3D printed microstrip patch antenna. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering (ICEECC 2016), 18th-19th December 2016, Johor Bahru, Johor. (Unpublished)

Abdullah, Aida Ashikin and Hassan, Norita (2016) Effect of epoxidized palm oil as plasticizer on polyhydroxyalkanoates mechanical behavior. Journal of Built Environment, Technology and Engineering, 1. pp. 205-208. ISSN 0128-1003

Abdullrhman Hossin, Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2016) Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Adebisi, A. A. and Maleque, Md. Abdul and Bello, K. A. (2016) Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Bello, Kamil Adeyemi (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6). pp. 533-547. ISSN 0927-6440 E-ISSN 1568-5543

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Bello, K.A. (2016) Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak.

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ndaliman, Mohammed Baba (2016) Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 21-26. E-ISSN 0128-1852

Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan and Hamidon, R. (2016) The effect of tool path strategies on cutting temperature and cutting force during pocket milling of AISI H13. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 337-344. ISSN 1819-6608

Ahmed, Nafees and Mohamad, Souad A. and Othman, Raihan and Ali, Mohd Hamdi (2016) Bio-dye sensitized solar cell for energy conversion. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Seder, Amin M. F. (2016) Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Any Nabila, Bt Abu Bakar and Taha, Assem Hatem and Adesta, Erry Yulian Triblas (2016) Real time handling system to enhance the productivity based on the layout improvement. International Review on Modelling and Simulations (I.RE.MO.S.), 9 (6). pp. 459-463. ISSN 1974-9821

Al Hazza, Muataz Hazza Faizi and Bourini, Islam Faisal (2016) Statistical analysis of tooling cost in high speed end milling for hardened steel. Electronic Journal of Applied Statistical Analysis, 9 (3). pp. 530-539. ISSN 2070-5948

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali , Mohammad Yeakub (2016) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Mohmad Bakhari, Nur Amirah Najwa (2016) Optimization of cutting parameters to minimize tooling cost in high speed turning of SS304 using coated carbide tool using genetic algorithm method. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 11-15. ISSN 0128-1852

Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem and Adesta, Erry Yulian Triblas and Albakri, Adilah (2016) Modelling and analysing deadlock in flexible manufacturing system using untimed petri net. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al-Bat’hia,, Souad A. M. and Buys, Yose Fachmi (2016) A Study on suitability of II-VI semiconductor /solid Polymer thin film junctions for Photovoltaic application. In: 5th International Advances In Applied Physics And Materials Science Congress And Exhibition, 16-19 April 2015, Turkey.

Ali, Fathilah and Awale, Raina Jama and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin (2016) Preparation and characterization of plasticized polylactic acid/starch blend. Jurnal Teknologi, 78 (11-2). pp. 7-12. E-ISSN 2180–3722

Ali, Fathilah and Jama Awale, Raina and Fakhruldin, Hanan and Anuar, Hazleen (2016) Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1153-1158. ISSN 1394-2506

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2016) Micromachining. In: Comprehensive materials finishing. Elsevier, pp. 322-343. ISBN 9780128032497

Ali, Mohammad Yeakub and Suieb, Ali Nurhanim and Mohamad Asharaf, Asfana Banu (2016) Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid. Journal of Engineering and Applied Sciences, 11 (7). pp. 1469-1474. ISSN 1816-949X E-ISSN 1818-7803

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Amin, A. K. M. Nurul and Begum, Mst. Nasima and Fathiah, Noor and Konneh, Mohamed and Ariff, Tasnim Firdaus (2016) An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass. Arabian Journal for Science and Engineering, 41 (11). pp. 4553-4562. ISSN 1319-8025 E-ISSN 2191-4281

Amin, A. K. M. Nurul and Konnek, Mohammed (2016) INFLUENCE OF MACHINING PARAMETERS ON TOOL WEAR AND MACHINING PERFORMANCE IN HIGH SPEED DUCTILE MODE END MILLING OF SODA LIME GLASS. Project Report. IREP, IIUM. (Unpublished)

Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.

Ascroft, Helen and Barnes, Stuart and Dahnel, Aishah Najiah and Gupta, Aniruddha and Abd Halim, Nor Farah Huda and Ray, David (2016) Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production, 12th - 15th July 2016, Bursa, Turkiye.

B

Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Enhanced freshwater production from waste/brackish/saline water in remote arid areas using specially designed coolant plates. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Banu, Asfana and Ali, Mohammad Yeakub (2016) Electrical discharge machining (EDM): A review. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 3-10. E-ISSN 0128-1852

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. (2016) Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016), 25th-26th August 2016, Kuala Lumpur, Malaysia. (Unpublished)

Bello, K. A. and Maleque, Md. Abdul and Adebisi, A. A. and Dube, A. (2016) Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings, 94 (4 (Special Issue: MITC special issue - Coatings for Tribology)). pp. 211-221. ISSN 0020-2967 E-ISSN 1745-9192

Bonnia, Noor Najmi and Kamaruddin, Mohd Shahril and Nawawi, M. H. and Ratim, Suzana and Hassan, Noor Azlina and Ali, E. S. (2016) Green biosynthesis of silver nanoparticles using ‘Polygonum hydropiper’ and study its catalytic degradation of methylene blue. Procedia Chemistry, 19. pp. 594-602. ISSN 1876-6196

D

Dahnel, Aishah Najiah and Ascroft, Helen and Barnes, Stuart (2016) The effect of varying cutting speeds on tool wear during conventional and Ultrasonic Assisted Drilling (UAD) of Carbon Fibre Composite (CFC) and titanium alloy stacks. In: 7th CIRP Conference on High Performance Cutting, HPC 2016, 31st May-2nd June 2016, Chemnitz; Germany.

H

Hablee, Sufiamie and Razali, Nurul Nadirah and Alqap, Asep Sofwan Faturohman and Sopyan, Iis (2016) Recent developments on injectable calcium phosphate bone cement. Recent Patents on Materials Science, 9 (2). pp. 72-94. ISSN 1874-4648 E-ISSN 1874-4656

Haiza, Haroon and Yaacob, Iskandar Idris and Ahmad Azhar, Ahmad Zahirani (2016) Effect of citrate concentration on colloidal gold (Au) nanoparticles produced using electro-dissolution-reduction method. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, Selangor.

Hamidon, R. and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohammad Yuhan (2016) Influence of cutting parameters on cutting force and cutting temperature during pocketing operations. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 453-459. ISSN 1819-6608

Hassan, Muhammad Hasibul and Mollik, Md Sazib (2016) Crystallization kinetics and thermal behaviors of multi-walled carbon nanotube dispersed jute reinforced composite. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4137-4142. ISSN 1819-6608

Hassan, Noor Azlina and J.N., Hasnidawani and Hassan, Norita and Surip,, Siti Norasmah (2016) Synthesis of SiO2 nanostructures using sol-gel method. In: 5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS 2015), 16th-19th April 2015, Lykia, Oludeniz, Turkey.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6. pp. 496-504. ISSN 2211-3797

J

J.N, Nor Hasnidawani and Hassan, Noor Azlina and Hassan, Norita and Bonnia, Noor Najmi and Ratim, Suzana and E. S., Ali (2016) Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.

Jamal, Nur Ayuni and Ai Wen, Tan and Yusof, Farazila and Katsuyoshi, Kondoh and Hisashi, Imai and Anuar, Hazleen (2016) Fabrication and compressive properties of low to medium porosity closed-cell porous aluminum using PMMA space holder technique. Materials, 9 (4). pp. 254-1. ISSN 1996-1944

Johari, Norhasnidawani and Hassan, Noor Azlina and Hassan, Norita and Ani, Mohd Hanafi (2016) Effect of nanoparticles on wettability of nanocoating on carbon steel. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 71-74. E-ISSN 0128-1852

K

Karim, A.N. Mustafizul and Tuan, Saravanan Tanjong and Emrul Kays, H.M. (2016) Assembly line productivity improvement as re-engineered by MOST. International Journal of Productivity and Performance Management, 65 (7). pp. 977-994. ISSN 1741-0401

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul (2016) A comparative evaluation of the prevailing models for measuring sustainable performance. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 292-296. ISSN 1819-6608

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) Relationships of lean, green manufacturing and sustainable performance: Assessing the applicability of the proposed model. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) A critical assessment of prevailing models for measuring lean manufacturing. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Ali , Mohammad Yeakub and Jamingan, Hazira (2016) Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohamad Kamal, Nor Shahirah (2016) Optimization of surface quality of mild steel machined by wire EDM using simulated annealing algorithm. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Konneh, Mohamed (2016) Precision surface grinding of silicon carbide. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 51-58. E-ISSN 0128-1852

L

Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohamed, Mohd Ambri and Mohd. Salit, Sapuan (2016) Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 230 (2). pp. 100-110. ISSN 1754-3371

M

Maleque, Md. Abdul (2016) Alloy steel bars for special application bolting materials. Other. UNSPECIFIED.

Maleque, Md. Abdul (2016) Erosion corrosion and tribological behavior of TIG torch composite layers. Project Report. Research Management Centre, International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and ., M. Radhi and Rahman, Md. Mustafizur (2016) Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1758-1764. ISSN 2289-4659 E-ISSN 2231-8380

Maleque, Md. Abdul and ., W. Saffin and Ahmed, A. S (2016) Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Abdullah, Umma and Yaacob, Iskandar Idris and Ali, Yousaf (2016) Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3), 6th-10th October, 2014, Miskolc-Lillafüred, Hungary.

Maleque, Md. Abdul and Adebisi, A. A. and ., N. Izzati (2016) Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul and Bello, Kamil Adeyemi and Salim, Nur Akma (2016) Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Lailatul, H. and Bello, K.A. and Azwan, M. (2016) Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach. In: 4th Malaysia-Japan Tribology Symposium 2016, 25th-26th August 2016, Universiti Teknologi Malaysia. (Unpublished)

Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Abd Rashid, Rashita and Sulaiman, Shazreen and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effects of Cr2O3 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with TiO2 (ZTA–TiO2) ceramic composite. International Journal of Refractory Metals and Hard Materials, 61. pp. 40-45. ISSN 0263-4368

Manshor, Hanisah and Ramli, Abdul Wahid and Ahmad Azhar, Ahmad Zahirani and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina. In: Advanced Materials Characterization Technique, Kuala Lumpur.

Manshor, Hanisah and Wan Sabri, Wan Muhammad Ihsan and Ramli, Abdul Wahid and Ahmad Azhar, Ahmad Zahirani and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effect of titania and magnesia on the physical properties of zirconia toughened alumina. Materials Science Forum, 840. pp. 82-86. ISSN 0255-5476

Md Idriss, A. N. and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Md Nasir, Ramdziah and Mridha, Shahjahan and Baker, T. N. (2016) Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology, 32 (4). pp. 303-307. ISSN 0267-0836 E-ISSN 1743-2847

Md Yusof, Fauziah and Abd Rahim, Mohd Khairul Hazami and Samsudin, Ahmad Safwan and Mohamad Nor, Nor Hafiez and Ahmad, Zuraida and Halim, Zahurin (2016) Optimization of natural fiber composite parameter using Taguchi approach. Advanced Materials Research, 1133. pp. 185-188. ISSN 1022-6680

Mohamad, Norsalawani and Bahar, Rubina (2016) Minimum Quantity Lubrication (MQL) and its effect on tool wear during miniature drilling: an experimental study. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 65-70. E-ISSN 0128-1852

Mohd Daud, Farah Diana and Vignesh, Kumaravel and Sreekantan, Srimala and Mohamed, Abdul Rahman and Misook, Kang and Byeong, Sub Kwak (2016) Ca(OH)2 nano-pods: investigation on the effect of solvent ratio on morphology and CO2 adsorption capacity. RSC Advances, 6 (42). pp. 36031-36038. ISSN 2046-2069

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2016) CTAB-assisted precipitation synthesis of Ca(OH)2 sorbent for CO2 captures. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, Selangor.

Mohd Daud, Farah Diana and Zulianey Kahlib, Nor Amyra and Mel , Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan , Noor Azlina (2016) Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Mohd Nasir, Nur Aimi and Anuar, Hazleen (2016) Effect of plasticizer on fracture toughness of polylactic acid reinforced with kenaf fibre and montmorillonite hybrid biocomposites. In: Nanoclay reinforced polymer composites: natural fibre/nanoclay hybrid composites. Engineering materials . Springer, Singapore, pp. 263-280. ISBN 978-981-10-0949-5 Online ISBN

Mohd Radzi, H.C.D. and Huzaifah, Hamdan (2016) EXTRACTION OF GAHARU OIL FROM AQUILARIA MALACCENCIS USING SUBCRITICAL EXTRACTION PROCESS. Project Report. UNSPECIFIED. (Unpublished)

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2016) The role of CaH2 in preventing oxidation for the production of single-phase NiTi alloy in solid state. Journal of Alloys and Compounds, 655. pp. 364-371. ISSN 0925-8388

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah (2016) Study on wear mechanism of solid carbide cutting tool in milling CFRP. Journal of Materials Research, 31 (13). pp. 1893-1899. ISSN 0884-2914

N

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2016) Effects of doping elements in β-FeSi2 prepared utilizing cast iron scrap chips. Materials Transactions, 57 (3). pp. 445-451. ISSN 1345-9678 E-ISSN 1347-5320

Nurdin, Irwan and Yaacob, Iskandar Idris and Johan, Mohd. Rafie (2016) Enhancement of thermal conductivity and kinematic viscosity in magnetically controllable maghemite (γ-Fe2O3) nanofluids. Experiment Thermal and Fluid Science, 77. pp. 265-271. ISSN 0894-1777

Nuruddin, Muhd Fadhil and Saad, Siti Asmahani and Shafiq, Nasir and Ali, Maisarah (2016) Effect of pretreatment soaking duration to characteristic of ultrafine treated rice husk ash (UFTRHA) as supplementary cementing material (SCM). ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7596-7600. ISSN 1819-6608

O

Othman, Nur Ezzah Faezah and Mohd. Salleh, Hamzah and Purwanto, Hadi (2016) Utilization of low-grade iron ore in ammonia decomposition. Procedia Chemistry, 19. pp. 119-124. ISSN 1876-6196

Omar, Mohd Afian and Hassan, Norita (2016) Development of thermoplastic natural rubber (TPNR) as a new binder in metal injection moulding. Journal of Engineering Science, 12. pp. 43-51. ISSN 1823-3430

P

P.H., Lailatul and Maleque, Md. Abdul (2016) Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8th-11th Nov 2016, Kuala Lumpur. (Unpublished)

Paijan, Lailatul Harina and Maleque, Md. Abdul and -, Suryanto (2016) Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Effect of air gap in the performance of AGMD system. ARPN Journal of Engineering and Applied Sciences, 11 (6). 4087 -4093. ISSN 1819-6608

R

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran (2016) Role of MgO nanoparticles on zirconia-toughened alumina-5 wt-% CeO2 ceramics mechanical properties. Materials Science and Technology, 32 (13). pp. 1316-1322. ISSN 0267-0836 E-ISSN 1743-2847

Rozhan, Alya Naili and Cahyono, Rochim Bakti and Nomura, Takahiro and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohiro and Purwanto, Hadi (2016) Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy, 8 (1). 013110-1-013110-11. ISSN 1941-7012

Rozhan, Alya Naili and Hamzah, Mohd. Salleh and Hadi , Purwanto (2016) New technology for biochar production from oil palm empty fruit bunch. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 368-371. ISSN 1819-6608

Rozhan, Alya Naili and Hamzah, Mohd. Salleh and Purwanto, Hadi (2016) Carbon deposition from biotar by fast pyrolysis of palm empty fruit bunch. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), 4th-6th August 2015, Penang, Malaysia.

S

S., Adzila and S., Ramesh and Sopyan, Iis (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14097-14100. ISSN 1819-6608

Sahari, J. and Maleque, Md. Abdul (2016) Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016. pp. 1-7. ISSN 1687-9422 E-ISSN 1687-9430

Sahari, Japar and Maleque, Md. Abdul (2016) Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers, 16 (4). pp. 323-329. ISSN 1618-7229

Samat, Noorasikin and Mohd Lazim, Nurul Hakimah and Motsidi, Siti Nor Rasyidah and Hassan, Noor Azlina (2016) Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Frontiers of Composite Materials 2016, 19th-21st Nov. 2016, Auckland, New Zeland. (Unpublished)

Samat, Noorasikin and Yahya, Mohd Samri and Mohd Lazim, Nurul Hakimah (2016) The compatibility effects of irradiated recycled PP on the mechanical and water properties of recycled PP/microcrystalline cellulose composites. In: International Conference on Advanced Science, Engineering and Technology (ICASET 2015), 21-22 December 2015, Penang.

Sarifuddin, Norshahida and Ismail, Hanafi (2016) Studies of polyethylene-based biocomposites, bionanocomposites and other non-biobased nanocomposites. In: Polyethylene-Based Biocomposites and Bionanocomposites. Wiley-Scrivener, John Wiley & Sons, Inc., Hoboken, NJ, USA., pp. 315-344. ISBN 9781119038450

Sopyan, Iis and Gunawan, Gunawan and Shah, Qasim Hussain and Mel, Maizirwan (2016) Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics. Materials and Manufacturing Processes, 31 (6). pp. 713-718. ISSN 1042-6914 E-ISSN 1532-2475

Sukindar, Nor Aiman (2016) filament nozzle extruder for polylactic acid (PLA) material. PI 2016703433.

Sukindar, Nor Aiman and Ariffïn, M.K.A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. E-ISSN 2180–3722

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2016) An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling. In: 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), 11th-13th December 2015, Incheon, South Korea.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer. In: 6 th edition of the International Conference on Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Biomechatornics and Neurorehabilitation, 4th-6th November 2016, Bucharest, Romania.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28th-30th August 2016, Putrajaya.

Surip, S.N. Surip and Wan Jaafar, W.N.R. and Azmi, N.N. and Hassan, Noor Azlina (2016) Biodegradation properties of poly (Lactic) acid reinforced by kenaf fibers. ACTA PHYSICA POLONICA A, 129. pp. 835-837. ISSN 0587-4246 E-ISSN 1898-794X

Syed Shaharuddin, Sharifah Imihezri and Ahmed, Ifty and Furniss, David and Parsons, Andrew James and Rudd, Christopher Douglas (2016) Investigation on the thermal properties, density and degradation of quaternary iron and titanium phosphate based glasses. In: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (IMEC-APCOMS 2015), 12-14 November 2015, Kuala Lumpur, Malaysia.

T

Taib, Taifunisyam and Al-Bat’hia,, Souad A. M. and Johan, Mohd Rafie and Basirun, Wan Jefrey and Chin, Kim Ming and Chia, Chang Cherng and Tan, Jia Herng (2016) Optical, thermal and dielectric studies of silver-silica nanoparticles synthesized via sol-gel technique. Materials Science Forum, 846. 318 -325. ISSN 1662-9752

Taib, Taifunisyam and Mohamad, Souad A. and Johan, Mohd Rafie and Basirun, Wan Jefrey and Chin, Kim Ming and Chia, Chang Cherng and Tan, Jia Herng (2016) Optical, thermal and dielectric studies of silver silica nanoparticles synthesized via sol gel technique. In: 28th Regional Conference on Solid State Science Technology 2014 (RCSSST 2014), 25th – 27th November 2014, Cameron Highlands, Pahang.

Tajuddin, Maisarah and Ahmad, Zuraida and Ismail, H. (2016) A review of natural fibers and processing operations for the production of binderless boards. BioResources, 11 (2). pp. 5600-5617. ISSN 1930-2126

Tajuddin, Maisarah and Ahmad , Zuraida and Sulaiman, Mohd Faris Haikal and Halim, Zahurin and Maleque, Md. Abdul (2016) Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.

Z

Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Machouche, Salah and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha @ Tohara, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016, 7th-8th May 2016, Kuala Lumpur.

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. (2016) Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC). pp. 6-13. E-ISSN 2289-9855

Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4. pp. 18-25. E-ISSN 2289-9855

Zulkefli, Farah Dzilhani and Rozhan, Alya Naili and Mohd. Salleh, Hamzah and Purwanto, Hadi (2016) Effect of pre-treatment on the quality of carbon-infiltrated bio-char. In: 4th International Conference Biotechnology Engineering 2016, 25-27 July 2016, Kuala Lumpur, Malaysia.