Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2010

Article

A.K.M., Nurul Amin and A.M.K., Hafiz and M.A., Lajis and Anayet U., Patwari (2010) Prediction of tool life and experimental investigation and prediction of tool life during hot milling of AISI H13 tool steel. Advanced Materials Research, 83-86. pp. 190-197. ISSN 1662-8985

A.N., Mustafizul Karim and S., Begum and M.S.J., Hashmi (2010) Performance and failure during energy testing of zinc oxide varistor processed from different powder size fraction and passivation thickness. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 175-181. ISSN 1823-0334

Abd. Rahman, Mohamed and Mohd. Salit, Sapuan and Mridha, Shahjahan and Abdan, Khalina (2010) Effects of simple abrasive combing and pretreatments on properties of pineapple leaf fibers (PALF) and PALF-Vinyl ester composite adhesion. Journal of Polymer-Plastics Technology and Engineering , 49 (10). pp. 972-978. ISSN 03602559 (print); 1525-6111 (online)

Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2010) Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering, 8. pp. 1-7. ISSN 1662-1018

Abdulkareem, Suleiman and Ali Khan, Ahsan and Konneh, Mohamed (2010) Reducing electrode wear using cryogenic cooling during electrical discharge machining. Advanced Materials Research, 83-86. pp. 672-679. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Konneh, Mohamed (2010) Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes, 25 (6). pp. 462-466. ISSN 1532-2475 (O), 1042-6914 (P)

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Riza, Muhammad and Agusman, Delvis and Rosehan, Rosehan (2010) Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research, 39 (2). pp. 265-278. ISSN 1450-202X E-ISSN 1450-216X

Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Muhammad, Riza and Suprianto, Mohamad Yuhan (2010) A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10). pp. 1420-1425. ISSN 1554-3641(O), 1546-9239 (P)

Ahmad Nawawi, Natasha and Sopyan, Iis and Ramesh, Singh and Afzeri, Afzeri (2010) Phase behaviour of manganese-doped biphasic calcium phosphate ceramics synthesized via sol-gel method. Asia-Pacific Journal of Chemical Engineering. ISSN 1932-2143

Alam, Md. Shah and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Konneh, Mohamed (2010) Prediction and investigation of surface response in high speed end milling of Ti-6Al-4V and optimization by genetic algorithm. Advanced Materials Research, 83-86. pp. 1009-1015. ISSN 1022-6680

Ali, Mohammad Yeakub and Hung, Wayne N.P. and Fu, Yongqi (2010) A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing, 11 (1). pp. 157-170. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Alqap, Asep Sofwan F. and Sopyan, Iis and Zubir, S. A. (2010) Concentration effect of aqueous synthesis on biphasic hydroxyapatite - β-tricalcium phosphate composition. Advanced Materials Research, 93-94. pp. 405-408. ISSN 1022-6680

Amin, A. K. M. Nurul and Hafiz, A.M.K. and Lajis, M.A. and Patwari, Anayet U. (2010) Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel. Advanced Materials Research, 83-86. pp. 190-197. ISSN 1022-6680

Amin, A. K. M. Nurul and Jaafar, Israd Hakim and Patwari, Muhammed Anayet Ullah and Zubaire, W. W. D. (2010) Role of discrete nature of chip formation and natural vibration of system components in chatter formation during metal cutting. IIUM Engineering Journal, 11 (1). pp. 124-138. ISSN 1511-788X

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Role of chip serration frequency in chatter formation during end milling operation of stainless steel. Advanced Materials Research, 97-101. pp. 1989-1992. ISSN 1662-8985

Anayet Ullah Patwari, Mohammed and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2010) Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research, 83-86. pp. 637-645. ISSN 1022-6680

Ang, Bee Chin and Yaacob, Iskandar Idris (2010) Preparation of maghemite-silica nanocomposites using sol-gel technique. Advanced Materials Research, 97-101. pp. 2140-2143. ISSN 1022-6680

Ani, Mohd Hanafi (2010) Loji nuklear pembekal utama tenaga dunia masa depan. Berita Harian.

Asif Iqbal, A.K.M. and Khan, Ahsan Ali (2010) Modeling and analysis of MRR, EWR and surface roughness in EDM milling through response surface methodology. American Journal of Engineering and Applied Sciences, 3 (4). pp. 611-619. ISSN 1941-7039 (O), 1941-7020 (P)

Che Murad, Mardziah and Iis, Sopyan and Mohd, Reusmaazran and Che Hak, Rohaida and Zakaria, Ahmad and Mohd, Reusmaazran (2010) Fabrication and characterization of strontium-doped hydroxypatite bioceramics scaffolds for bone implant application: a preliminary study. Advanced Materials Research, 93-94. pp. 401-404. ISSN 1022-6680

Chee, Ching Yern and Yaacob, Iskandar Idris (2010) Influence of nanosilica/polyurethane composite coating on IR effectiveness and visible light transmission properties of polyethylene. Advanced Materials Research, 97-101. pp. 1669-1672. ISSN 1022-6680

Gabbitas, Brian Leslie and Mohamed Ariff, Tasnim Firdaus and Cao, Peng (2010) Synthesis of pewter alloy from tin–copper–antimony powder mixtures by microwave and conventional sintering. Journal of Powder Metallurgy. ISSN 1743-2901 (O), 0032-5899 (P)

Haque, Md. Mohafizul and Ismail, Ahmad Faris (2010) Engineering materials and manufacturing processes from Qur'anic perspective. Advanced Materials Research, 83-86. pp. 834-841. ISSN 1662-8985

Iqbal, A.K.M. Asif and Khan, Ahsan Ali (2010) Influence of process parameters on electrical discharge machined job surface integrity. American Journal of Engineering and Applied Sciences, 3 (2). pp. 396-402. ISSN 1941-7039 (O), 1941-7020 (P)

Ismail, Roslina and Yaacob, Iskandar Idris (2010) Synthesis of Ni3Al/ZrO2 nanocomposite and study on its high temperature oxidation in mixed gas environment. Materials Science Forum, 654-6. pp. 2739-2742. ISSN 0255-5476

Ismail, Roslina and Yaacob, Iskandar Idris (2010) Synthesis of intermetallic Ni3Al Alloy: properties and high temperature oxidation behavior. Advanced Materials Research, 97-101. pp. 386-389. ISSN 1022-6680

Jamal, Nur Ayuni and Anuar, Hazleen and Abdul Razak, Shamsul Bahri (2010) A linear relationship between the tensile, thermal and gas barrier properties of mape modified rubber toughened nanocomposites. IIUM Engineering Journal, 11 (2). pp. 225-239. ISSN 1511-788X

Kawamura, Kenichi and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Maruyama, Toshio (2010) The oxygen potential on the scale surface of alloys at high temperature oxidation. Netsu Sokutei : Calorimetry and Thermal Analysis, 38 (2). pp. 54-57.

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 171-174. ISSN 1823-0334

Lajis , M.A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Hafiz, A. M. K. (2010) Preheating in end milling of AISI D2 hardened steel with coated carbide inserts. Advanced Materials Research, 83-86. pp. 56-66. ISSN 10226680

M.A., Maleque and M.M., Rahman and Khalaf I., Hamada and M.M., Noor and K., Kadirgama and Rosli , A. Bakar and R.A., Bakar (2010) Heat transfer characteristics of intake port spark ignition engine: a comparative study. Journal of Applied Sciences, 10 (18). pp. 2019-2026. ISSN 1812-5662 (O), 1812-5654 (P)

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering, 5 (1). pp. 95-100. ISSN 1823-0334

Marita, Yusrini and Yaacob, Iskandar Idris (2010) Structural characterization of electrodeposited nickel-iron alloy films. Materials Science Forum, 654-6. pp. 2430-2433. ISSN 0255-5476

Marita, Yusrini and Yaacob, Iskandar Idris (2010) Synthesis and characterization of nickel-iron-silicon nitride nanocomposite. Advanced Materials Research, 97-101. pp. 1360-1363. ISSN 1022-6680

Maruoka, Nobuhiro and Purwanto, Hadi and Akiyama, Tomohiro (2010) Exergy analysis of methane steam reformer utilizing steelmaking waste heat. ISIJ International, 50 (9). pp. 1311-1318. ISSN 1347-5460 (O), 0915-1559 (P)

Mohd Jaafar, Mohammad Nazri and Ishak, Mohd Shaiful Ashrul and Saharin, Sanisah (2010) Removal of NO(x) and CO from a burner system. Enviromental Science and Technology, 44 (8). pp. 3111-3115. ISSN 0013-936X

Mohd Noor, Siti Salwa and Yaacob, Iskandar Idris (2010) Preparation of manganese zinc ferrite nanoparticles by polymer matrix templated synthesis. Advanced Materials Research, 97-101. pp. 2171-2174. ISSN 1022-6680 (Unpublished)

Othman, Maizatulnisa (2010) Poly(Lactic Acid) (PLA)-reinforced Kenaf Bast Fiber Composites: The Effect of Triacetin. Journal of REINFORCED PLASTICS AND COMPOSITES, 29 (7). pp. 1099-1111. ISSN 0731-6844

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it’s prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)

Purwanto, Hadi and Kasai, Eiki and Akiyama, Tomohiro (2010) Process analysis of the effective utilization of molten slag heat by direct blast furnace cement production system. ISIJ International, 50 (9). pp. 1319-1325. ISSN 1347-5460 (O), 0915-1559 (P)

Purwanto, Hadi and Selamat, Nurfazilah and ., Pramusanto and Akiyama, Tomohiro (2010) Pre-reduced iron produced from low grade ore using biomass. SEAISI Quarterly Journal, 39 (2). pp. 18-22. ISSN 0129-5721

Rahman, Md. Mustafizur and Hamada, Khalaf I. and Mat Noor, Muhamad and Abu Bakar, Rosli and Kadirgama, Kumaran and Maleque, Md. Abdul (2010) Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10). pp. 1364-1371. ISSN 1546-9239 E-ISSN 1554-3641

Samat, Noorasikin and Burford, Robert and Whittle, Alan and Hoffman, Mark (2010) The effects of water and frequency on fatigue crack growth rate in modified and unmodified Polyvinyl Chloride. Polymer Engineering and Science, 50 (2). pp. 352-364. ISSN 1548-2634

Setiawan, Asep Ridwan and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K. ISIJ International, 50 (2). pp. 259-263. ISSN 1347-5460 (O), 0915-1559 (P)

Shah, Sugrib Kumer and Haque, Md. Mohafizul and Maleque, Md. Abdul (2010) Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 208-213. ISSN 1823-0334

Shaha, Sugrib Kumar and Dyuti, S. and Haque, Md. Mokammel and Maleque, Md. Abdul (2010) Development of a new route for Fe-C-Al cast iron production. Journal of Applied Sciences, 10 (12). pp. 1196-1199. ISSN 1812-5662 (O), 1812-5654 (P)

Sopyan, Iis (2010) Manganese doping on biphasic calcium phosphate ceramics for machanical improvement. Medical Journal of Malaysia, 65. pp. 14-16. ISSN 0300-5283

Sutjipto, Agus Geter Edy and Jufriadi, . and Muhida, Riza and ., Afzeri and Adesta, Erry Yulian Triblas (2010) Modeling electric field distribution on insulator under electron bombardment in vacuum. International Journal of Aerospace and Mechanical Engineering, 4 (4). pp. 192-195. ISSN 2010-3794 (O), 2010-3786 (P)

Teh, Sooh Hian and Yaacob, Iskandar Idris (2010) The effect of cobalt addition on structural and magnetic properties of electrodeposited iron-platinum nanocrystalline thin films. Materials Science Forum, 654-6. pp. 1736-1739. ISSN 02555476

Toque, Jay Arre and Herliansyah, Muhammad Kusumawan and Abd Shukor, Mohd Hamdi and Ide-Ektessabi, A. and Sopyan, Iis (2010) Adhesion failure behavior of sputtered calcium phosphate thin film coatings evaluated using microscratch testing. Journal of the Mechanical Behavior of Biomedical Materials, 3. pp. 324-330. ISSN 1751-6161

Triwiyanto , Askar and Mridha , Shahjahan and Haruman, Esa (2010) Low temperature thermochemical surface treatment of austenitic stainless steel for improved mechanical and tribological. Advanced Materials Research, 83-86. pp. 489-496. ISSN 1022-6680

Ullah Patwari, Mohammed Anayet and Amin, A. K. M. Nurul and Istihyaq , M.H. and Faris, Waleed Fekry (2010) Development of a mathematical model for the prediction of chip formation instability and its verification by fuzzy logic with genetic algorithm. International Journal of Machining and Machinability of Materials (IJMMM), 8 (1/2). pp. 38-54. ISSN 1748-572X

Wan Busu, Wan Nazri and Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi and Jamal, Nur Ayuni Jamal (2010) The mechanical and physical properties of thermoplastic natural rubber hybrid composites reinforced with hibiscus cannabinus, L and short glass fiber. Polymer-Plastics Technology and Engineering, 49 (13). pp. 1315-1322. ISSN 0360-2559 E-ISSN 1525-6111

Book

Adesta, Erry Yulian Triblas and Iskandar, Idris and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Tasnim, Firdaus, eds. (2010) Materials Processing and Precision Engineering: series 1. Series 1 . Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia.

Adesta, Erry Yulian Triblas (2010) Extended enterprise: an extension to supply-chain practice for small to medium enterprise. Lambert Academic Publishing, Germany. ISBN 9783843378840

Adesta, Erry Yulian Triblas and Muhammad, Riza (2010) Performance of cermet tools : applying negative rake angles high speed machining. LAP Lambert Academic Publish GmbH & Co, Germany. ISBN 3843374783

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2010) Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8383-7307-2

Book Chapter

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Sopyan, Iis and Abdul Rahim, Toibah and Ahmad, Zainal Arifin (2010) Magnesium-doped biphasic calcium phosphate nanopowders via sol-gel method. In: The Sol-Gel Process : Uniformity, Polymers and Applications. Nova Science Publishers, Inc. ISBN 978-1-61761-621-1

Proceeding Paper

., Afzeri and Muhida, Riza and ., Darmawan (2010) Development of remote operability CNC milling. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Adebisi, Adetayo A. and Maleque, Md. Abdul (2010) Effect of multiple-particle size reinforced silicon carbide(SICP) on properties of aluminium matrix composite. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Adesta, Erry Yulian Triblas and Hazza, Muataz and Riza, Muhammad (2010) The development of tool life estimation model based on volume loss method. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Adetayo A., Adebisi and Maleque, Md. Abdul (2010) Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress 2010, 2 - 5 August, 2010, Kuching, Sarawak.

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology, 29 Nov-1 Dec 2010, Prince Hotel, Kuala Lumpur.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Amin, A. K. M. Nurul and Mokhtar, Suhaily and Patwari, Muhammed Anayet Ullah and Abdul Razak, Nurhayati (2010) A new technique to improve the machinability of hardened steel AISI H13 in end milling. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and M., Dali and M.I., Musa (2010) Development of a cost effective technique to eliminate conventional finishing operation applying high speed end milling of silicon. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2010) Hybrid scheme for the prediction of microstructural features of ferritic stainless steel welds. In: International Conference on Materials Processing Technology (MAPT 2010), 5-6 January 2010, Bangkok, Thailand.

Ani, Mohd Hanafi and Othman, Raihan and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) In-situ method to monitor surface reaction/oxidation at high temperature. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Ani, Mohd Hanafi and Setiawan, Asep Ridwan and Hens, Saputra and Othman, Raihan and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu. (Unpublished)

Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K. In: International Symposium on High Temperature Oxidation and Corrosion (ISHOC) 2010, 8-11th November 2010, Zushi, Japan. (Unpublished)

Anuar, Hazleen and A., Adilah and S.N., Surip (2010) Development of reinforced thermoplastic elastomer with kenaf bast fibre for automotive component. In: 14th European Conference on Composite Materials, 7-10 June 2010, Budapest, Hungary.

Anuar, Hazleen and Ahmad, Zuraida and F., Fuad (2010) Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010), 9-11 November 2010, Crystal Crown Hotel, Petaling Jaya, Malaysia. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Halim, Zahurin (2010) Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM), 8-10 December 2010, Johor Bahru, Johor, Malaysia. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Jozsef Gabor, Kovacs and A., Adilah (2010) Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition, 22–23 June 2010, Stuttgart, Germany. (Unpublished)

Anuar, Hazleen and Ahmad, Zuraida and Mat Ali, Adilah and Yusof, Siti Rasyidah and Fuad, Faizah (2010) An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Anuar, Hazleen and Fuad, Faizah and J., Asma' and Kaiser, Mohammad Rejaul and Ahmad, Zuraida (2010) Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)

Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd Sidi, Nor Hanis (2010) Lactic acid production from Kenaf fibre. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2010) New potential of biomaterials from kenaf fibre biomass. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)

Hasbullah, Faried and Faris, Waleed Fekry (2010) A comparative analysis of LQR and fuzzy logic controller for active suspension using half car model. In: 11th International Conference on Control, Automation, Robotics and Vision, ICARCV 2010, 7-10 december 2010, Singapore.

Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad, Zuraida and Abd Razak, Shamsul Bahri (2010) Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Kaiser, Mohammad Rejaul and Anuar, Hazleen and Maleque, Md. Abdul (2010) Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010), 31 May-1 June 2010, Pekan, Pahang.

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2010) Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010, 8-9th April, 2010, London.

M.A., Maleque (2010) Reverse engineering of children bicycle. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Maleque, Md. Abdul and Arifutzzaman, A. K. H. A. Ma and Rahman, Md. Mustafizur (2010) Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Dyuti, S. and Rahman, Md. Mustafizur (2010) Material selection method in design of automotive brake disc. In: World Congress on Engineering 2010 , 30 June to 2 July 2010, London, United Kingdom.

Maleque, Md. Abdul and Kaiser, Mohammad Rejaul (2010) An overview of advanced material characterization techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3 - 4 December 2010, Pekan, Pahang.

Maleque, Md. Abdul and Sarker, Dyuti (2010) Development of material selection method for the application children bicycle frame. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Maleque, Md. Abdul and Sarker, Dyuti (2010) Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials, 24 - 26 February, 2010, Dhaka.

Maleque, Md. Abdul and Sarker, Dyuti (2010) The development of an optimum material selection process for the design of automative brake rotor. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010), 15th-17th June 2010, Kuala Lumpur Convention Centre, Kuala Lumpur.

Mohamad, Souad A. and Arof, A. K. (2010) Photovoltaic properties of semiconductor (ZnSe)/Polymer (PEO Chitosan blend) / Semiconductor (ZnTe) double junction for solar cells applications. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Mohamed , Konneh (2010) Study of the effects of EDM parameters on material removal rate , electrode wear rate and surface roughness in the EDM of S-Star. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Mohd Daud, Farah Diana and Sopyan, Lis and Mel, Maizirwan (2010) Synthesis of TiO2 nanosized powder photocatalyst via soft-gel method for bacteria inactivation application. In: 19th Scientific Conference of Electron Microscopy Society of Malaysia (EMSM), 14-16 December 2010, Langkawi, Malaysia. (In Press)

Mokhtar, Suhaily and Amin, A. K. M. Nurul and Patwari, Anayet Ullah and A. Azhar, A. Hazim and A. R., Zulkhari (2010) Enhancement of machinability of nickel based alloy - inconel 718 by induction preheating in end milling using ceramic inserts. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Sharulhazrin, M. S. and Hafizzudin , I (2010) A new technique for the investigation of chatter formation during end milling of medium carbon steel (AISI 45). In: International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17-19 March, 2010, Hong Kong.

Sarker, Dyuti and Mridha, Shahjahan and Shaha, Sugrib Kumar (2010) Formation of Ti-Al-N dispersed composite layer on steel by TIG torch surface cladding. In: International Conference on Materials Processing Technology 2010, 5 - 6 January, 2010, Bangkok, Thailand.

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. and Tamin, M.N. (2010) Continuum damage evolution in pb-free solder joint under shear fatigue loadings. In: 12th Electronics Packaging Technology Conference, 8th - 10th December 2010 , Singapore .

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. (2010) Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package. In: 34th International Electronics Manufacturing Technology Conference (IEMT 2010), 30th - 2nd November 2010 , Melaka.

Shaha, Sugrib Kumar and Maleque, Md. Abdul and Dyuti, S. and Haque, Md. Mohafizul (2010) Design and development of mild steel die for production of hip-bone joint. In: International Chemical and Environmental Engineering Conference 2010, 26-28 November 2010, Kuala Lumpur.

Sopyan, Iis and Mel, Maizirwan and Fadli, Ahmad and Zulkifli, Nur Izzati (2010) Floating porous ceramics for high densiti cell culture in stirred bioreactors. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sudin, Izman and Mohd. Yusof, Noordin and Safari, Habib and Engku Abu Bakar, Engku Mohd Nazim and Aluwi Shakir, Noor Adila and Konneh, Mohamed (2010) Effect of high temperature chemical etching on surface roughness of tungsten carbide substrate. In: 11th Asia Pacific Industrial Engineering and Management Systems (APIEMS) Conference, 7-10 Dec 2010, Melaka, Malaysia. (In Press)

Surip, Siti Norasmah and Ismail, A. H. and Anuar, Hazleen (2010) A comparative study on the mechanical properties of clay-modified epoxy adhesive by using different clay types. In: 14th European Conference On Composite Materials (ECCM14), 7-10 June 2010, Budapest, Hungary.

Sutjipto, Agus Geter Edy (2010) Recent finding on premature failure of commercial electric motor bearings. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sutjipto, Agus Geter Edy and -, Jufriadi and Muhida, Riza and Othman, Raihan (2010) Green technology of energy-efficient materials up to 70% for plasma display panel. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sutjipto, Agus Geter Edy and Bakri, Jufriadi and Muhida, Riza and Othman, Raihan (2010) Novel AZO thin film for display and Photovoltaic application. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Sutjipto, Agus Geter Edy and Yahya, Ruslan and Muhida, Riza (2010) Novel nuclear technology for controlled production of n-type semiconductor. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26-27 January 2010, Kuala Lumpur.

Yusof, Yusliza and Ahmad, Zuraida and Sopyan, Iis (2010) Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Patent

Anuar, Hazleen (2010) Sugar hydrolysis of kenaf fibre for utilization in lactic acid production. PI 2010005191 .