IIUM Repository

Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: A | B | G | H | I | K | L | M | P | R | S | T | W | Y
Number of items: 59.

A

A N, Natasha and Sopyan, Iis and Mel, Maizirwan and S., Ramesh (2008) Influence of Manganes Doping into HA Powders on the properties of its Dense Bodies. The Medical Journal of Malaysia, 63 (Sup A). pp. 85-86. ISSN 0300-5283

A R, Toibah and Sopyan, Iis and Mel, Maizirwan (2008) Synthesis and characterization of magnesium doped biphasic calcium phosphate. The Medical Journal of Malaysia, 63 (Sup A). pp. 83-84. ISSN 0300-5283

Ali, Mohammad Yeakub (2008) Focused ion beam machining of cell culture dish. In: ISE Seminar 2008, 3rd March 2008, Thailand. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering, 29 February 2008, Changwon, S. Korea.

Ali, Mohammad Yeakub (2008) Geometrical integrity of microholes produced by micro-EDM. Research Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Micro-drilling of metallic materials for microsystems technology. Project Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and Alif, M. and Irman, K. and Hajar, N. and Hayati, N. (2008) Investigation of burr formation in micro end milling. In: International Conference on Science and Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Mehfuz, R. and Najran, W. and Akif, M. (2008) Influence of micro end milling process parameters on surface roughness. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mehfuz, R. and Aishah, S. and Hayati, N. and Hajar, N. (2008) Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Mehfuz, R. (2008) Investigation of finish cut of micro electro discharge milling for nano surface finish. In: International Conference on nanoManufacturing (nanoMan2008), 13-16 July 2008, Singapore.

Ali, Mohammad Yeakub and Mohammad, Ammar Sami (2008) Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes, 23 (7). pp. 641-645. ISSN 1042-6914

Ali, Mohammad Yeakub and Rosfazila, M. R. and Rosnita, E. (2008) Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: "Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance", 14- 16 January 2008, Sanya, Hainan; China.

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201. pp. 466-470. ISSN 0924-0136

Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201 (1-3). pp. 466-470. ISSN 0924-0136

Anuar, Hazleen and Hj J Ahmad, Sahrim and Rasid, Rozaidi and Ahmad, Azizan and Wan Busu, W. N. (2008) Mechanical properties and dynamic mechanical analysis of thermoplastic-natural-rubber-reinforced short carbon fiber and kenaf fiber hybrid composites. Journal of Applied Polymer Science, 107 (6). pp. 4043-4052. ISSN 0021-8995

Anuar, Hazleen and Wan Busu, Wan Nazri and Ahmad, S. H. and Rasid, Rozaidi (2008) Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber – Part I: Processing parameters and tensile properties. Journal of Composite Materials, 42 (11). pp. 1075-1087. ISSN 0021-9983 (P), 1530-793X (O)

B

Begum, Shahida Nathira and Karim, A.N. Mustafizul and Hashmi, M. S. J. (2008) Characterization and performance evaluation of zinc oxide varistor blocks processed by latex binders. Journal of American Ceramic Society, 91 (10). pp. 3216-3221. ISSN 0002-7820

G

Ginta , Turnad L. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2008) Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts. In: International Joint Conference in Engineering (IJSE 2008), 4-5 August, 2008, Jakarta, Indonesia.

H

Haque, Md. Mohafizul and Khan, Ahsan Ali (2008) Investigation on structure and properties of brass casting. Journal of Materials Science & Technology, 24 (3). pp. 299-301. ISSN 1005-0302

Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)

Hossain, Mohammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Anayet Ullah (2008) Development of an artificial neural network algorithm for predicting the surface roughness in end milling of inconel 718 alloy. In: International Conference on Computer and Communication Engineering 2008, 13-15 May 2008, Kuala Lumpur.

Hossain, Muhammad Ishtiyaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Karim, A. (2008) Enhancement of machinability by workpiece preheating in end milling of Ti-6Al-4V. Journal of Achievements in Materials and Manufacturing Engineering, 31 (2). pp. 320-326. ISSN 1734-8412

I

Inami, Nobuhito and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2008) Device characteristics of carbon nanotube transistor fabricated by direct growth method. Applied Physics Letters, 92 (24). ISSN 0003-6951

K

Khan, Ahsan Ali (2008) Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes. The International Journal of Advanced Manufacturing Technology, 39 (5-6). pp. 482-487. ISSN 0268-3768

Khan, Ahsan Ali and Abdulkareem, Suleiman (2008) Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes. The International Journal for Manufacturing Science & Production, 9 (1-2). pp. 87-98. ISSN 0793-6648

Khan, Ahsan Ali and Haque, Md. Mohafizul and Ali, Mohammad Yeakub (2008) Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27 - 29 May 2008, Cairo, Egypt.

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2008) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

L

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2008) Hot machining in end milling of hardened steel AISI D2. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008).

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.

Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Turnad L., Ginta (2008) Theoretical and experimental investigation in prediction of tool life in preheated machining of AISI 02 hardened steel. IIT Madras, Chennai, India.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2008) Modelling and optimization of tool life in end milling of AISI 02 hardened steel. In: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ’08), July 23-25, 2008, Naples, Italy.

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A. M. Khalid and Turnad L., Ginta (2008) Prediction of tool life in end milling of hardened steel AISI D2. European Journal of Scientific Research, 21 (4). pp. 592-602. ISSN 1450-216X,

Leman, Z. and Sapuan, S. M. and Saifol, A.M. and Maleque, Md. Abdul and Ahmad, M.M.H.M. (2008) Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design, 29. pp. 1666-1670. ISSN 0261-3069

Leman, Zulkiflle and Sapuan, Salit Mohd and Azwan, M. and Ahmad, Megat Mohamad Hamdan Megat and Maleque, Md. Abdul (2008) The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6). pp. 606-612. ISSN 0360-2559

M

Maleque, Md. Abdul and Karim, Md Rezaul (2008) Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology, 60 (4). pp. 189-194. ISSN 0036-8792

Mohamed, Mohd Ambri and Inami, Nobuhito and Shikoh, Eiji and Yamamoto, Yoshiyuki and Hori, Hidenobu and Fujiwara, Akihiko (2008) Fabrication of spintronics device by direct synthesis of single-walled carbon nanotubes from ferromagnetic electrodes. Science and Technology of Advanced Materials, 9 (2). ISSN 1468-6996

Mohamed Ariff, Tasnim Firdaus (2008) Enhancing mechanical and structural properties of pewter alloy using microwave sintering. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian (2008) Effect of microwave sintering on the mechanical and structural properties of pewter alloy. RJooiSA, Transactions on Material Science, 8 (1). ISSN 0-9703797-5-7

Mohd Azhari, Mohd Azmir and Khan, Ahsan Ali (2008) Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining. Journal of Materials Processing Technology, 198 (1-3). pp. 122-128. ISSN 0924-0136

Mridha, Shahjahan and Khan, Ahsan Ali (2008) The effects of process variables on the hardness of nitrided 3% chromium steel. Journal of Materials Processing Technology, 201 (1-3). pp. 325-330. ISSN 0924-0136

P

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodological approach for the prediction of tangential cutting forces in end milling of stainless steel. Journal of Engineering, 6 (3). pp. 171-178. ISSN 1584-2673

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020. In: Malaysian Metallurgical Conference, MMC 2008, 3 - 4 December 2008, UKM, Bangi, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

R

Rahman , M.M. and Hamada, Khalaf I and Noor, M.M. and Bakar, Rosli A. and Kadirgama, K. and Maleque, Md. Abdul (2008) Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences, 8 (19). pp. 3316-3327. ISSN 1812-5662 (O), 1812-5654 (P)

S

Samat, Noorasikin and Kemal, Indra and Burford, Robert and Whittle, Alan and Hoffman, Mark (2008) Fatigue behaviour of PVC nanocomposites. In: ARNAM Annual Workshop, 15 - 18 December 2008, Deakin University, Victoria. (Unpublished)

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2008) Fatigue crack propagation of PVC-U and PVC-M pipes in a water environment. In: 5th International Conference on Polymers, Composites and Adhesives, 7 - 11 September 2008, Les Diablerets, Switzerland. (Unpublished)

Sopyan, Iis and Ramesh, Singh and Hamdi, Mohamed Salah (2008) Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 47 (11). pp. 1626-1631. ISSN 0376-4710

Sutjipto, Agus Geter Edy and -, Jufriadi and Muhida, Riza and Takata, Masasuke (2008) Novel characterization technique by using an SEM. In: XXIII-rd Int. Symp. on Discharges and Electrical Insulation in Vacuum (ISDEIV 2008), 15 - 19 September 2008, Bucharest, Romania.

T

Toibah, A. R. and Sopyan, Iis and Abd Shukor, Mohd Hamdi and S., Ramesh (2008) Development of magnesium-doped biphasic calcium phosphate through sol-gel method. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, 25 – 28 June 2008, Kuala Lumpur, Malaysia.

Turnad L., Ginta and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

W

Whittle, Alan and Samat, Noorasikin and Hoffman, Mark and Burford, Robert (2008) Fatigue crack propagation of PVC-U and PVC-M in water environment. In: Plastic Pipes XIV Conference, 22 - 24 September 2008, Budapest, Hungary. (Unpublished)

Y

Yusof, Yusliza and Ahmad, Zuraida and Iis, Sopyan (2008) Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research, 47. pp. 1189-1192. ISSN 1022-6680

This list was generated on Thu Oct 29 11:16:09 2020 +08.