Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2007

Mohamad, S.A. and Yahya, Rosiyah and Ibrahim, Zainukl Abidin and Mohd Arof, Abdul Kariem (2007) Photovoltaic activity in a ZnTe/PEO-chitosan blend electrolyte junction. Solar Energy Materials and Solar Cells, 91 (13). pp. 1194-1198. ISSN 0927-0248

A.K.M., Nurul Amin and Abraham, Irwan and Nor, Khairusshima and Ahmed, Mirghani Ishak (2007) Influence of preheating on performance of circular carbide inserts in end milling of carbon steel. Journal of Materials Processing Technology, 185 (1-3). pp. 97-105. ISSN 0924-0136

Ahmad, S. H. and Rasid, Rozaidi and Surip, S. N. and Anuar, Hazleen and Czigany, T. and Abdul Razak, S. B. (2007) Mechanical and fracture toughness behavior of TPNR nanocomposites. Journal of Composite Materials, 41 (17). pp. 2147-2159. ISSN 0021-9983 (P), 1530-793X (O)

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Haque, Md. Mohafizul (2007) Manufacturing engineering education in IIUM. In: Regional Conference on Engineering Education 2007 (RCEE 2007), 03-05 December 2007, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Loo, Yee Wei (2007) Geometrical integrity of micromold cavity sputtered by FIB using multilayer slicing approach. Microsystems Technologies, 13 (1). pp. 103-107. ISSN 0946-7076

Ali, Mohammad Yeakub and N.I, Rashidah and N.A, Azima (2007) Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Reyad, Mehfuz (2007) Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 12-13 Dec. 2007, Culture Activity Centre (CAC), IIUM . (Unpublished)

Anuar, Hazleen (2007) Essential work of fracture and acoustic emission study on TPNR composites reinforced by Kenaf Fiber. Journal of Composite Materials, 41 (25). pp. 3035-3049. ISSN 0021-9983 (P), 1530-793X (O)

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ishtiyaq, M. H. (2007) Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.

Hafiz, A. K. M. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI H13 tool steel. In: International Conference on Industrial Engineering and Engineering Management, 2 - 5 December 2007, Singapore.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI HI3 tool steel. In: 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 2 - 4 December 2007, Singapore.

Hafiz, A.M. Khalid and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model for PCBN inserts during the high speed end milling of AISI H13 hardened tool steel. In: International Conference on Mechanical Engineering (ICME07), 29-31 Dec. 2007, Dhaka, Bangladesh.

Inami, Nobuhito and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2007) Synthesis-condition dependence of carbon nanotube growth by alcohol catalytic chemical vapor deposition method. Science and Technology of Advanced Materials, 8 (4). pp. 292-295. ISSN 1468-6996

Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..

Khalid, A. K. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of tool life prediction model of TIALN coated tools during the high speed hard milling of AISI H13 steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, 24 - 27 October 2007, Zadar, Croatia.

Khan, Ahsan Ali and Haque, Md. Mohafizul (2007) Performance of different abrasive materials during abrasive water jet machining of glass. Journal of Materials Processing Technology, 191 (1-3). pp. 404-407. ISSN 0924-0136

Lajis, M. A. and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Hafiz, A.M. Khalid (2007) Prediction of surface roughness in hard milling of AISI D2 tool steel. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Khalid, A. K. H. (2007) Modelling of tool life by response surface methodology in hard milling of Aisi D2 tool steel. In: The 18th International DAAM Symposium on Intelligent Manufacturing and Automation, , 24 - 27 Oct., 2007, Zadar, Croatia.

M. K., Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of aluminum silicon carbide (AlSiC). Journal of Materials Processing Technology, 192-3. pp. 147-158. ISSN 0924-0136

Maleque, Md. Abdul and Belal, F. Y. and Sapuan, S. M. (2007) Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering , 32 (2B). pp. 359-364. ISSN 1319-8025

Mehfuz, R. and Ali, Mohammad Yeakub (2007) Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka, Bangladesh.

Mohamad, Souad A. and Ali, Moazzam H. and Yahya, Rosiyah and Ibrahim, Zainol Abidin and Arof, Abdul Kariem (2007) Photovoltaic activity in a ZnSe/PEO-chitosan blend electrolyte junction. Ionics, 13 (4). pp. 235-240. ISSN 0947-7047

Mohamad, Souad A. and AROF, A.K and ALI,, M.H. (2007) Semiconductor/polymer electroylte junction solar cell. In: Malaysia Technology Expo 2007, 29-31 March 2007, Kuala-Lumpur Malaysia. (Unpublished)

Nuruzzaman, D. M. and Nakajima, A. and Mawatari, T. and Ali, Mohammad Yeakub (2007) Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact. IIUM Engineering Journal, 8 (1). pp. 49-62. ISSN 1511-788X

Samat, Noorasikin and Whittle, Alan and Hoffman, Mark (2007) Fatigue crack growth in unplasticized polyvinyl chloride (u-PVC) and modified polyvinyl chloride (PVC-M)at different frequencies. In: ARNAM 2007 Annual Workshop, 8-11 July, 2007, Australian National University, Kiola Canberra. (Unpublished)

Sutjipto, Agus Geter Edy (2007) Surface breakdown property of SiO2 added MgO under electron bombardment in vacuum: a promising materials for spacecraft and space station. Canadian Journal of Pure and Applied Sciences, 1 (1). pp. 73-77. ISSN 1715-9997

Sutjipto, Agus Geter Edy (2007) The effect of CaO addition on the microstructural, mechanical and dielectric properties of pure MgO ceramic. Key Engineering Materials, 345-46. pp. 1609-1612. ISSN 1013-9826

Sutjipto, Agus Geter Edy and Takata, Masasuke (2007) The use of SEM to investigate the effect of an electron beam on the optically-visible flashover treeing of MgO ceramic. Journal of Materials Science, 42. pp. 6036-6040. ISSN 1573-4803 (O), 0022-2461 (P)

Wan Nik, W.B. and Maleque, Md. Abdul and Ani, F. N. and Masjuki, H.H. (2007) Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5). pp. 200-208. ISSN 0036-8792