Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2019

A. Rahim, Syazwani and Muthalif, Asan G. A. and Turahim, Khairiah Kamilah and Nordin, Nor Hidayati Diyana (2019) Active Vibration Isolation System (AVIS) using a voice coil actuator to improve free space optics communication. In: "10th IEEE Control and System Graduate Research Colloquium, ICSGRC 2019", 2- 3 August 2019, Shah Alam.

Aabid, Abdul and Afifi, Azmil and Mehaboobali, Fharukh Ahmed Ghasi and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2019) CFD analysis of splitter plate on bluff body. CFD Lettrs, 11 (11). pp. 25-38. ISSN 2180-1363

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modeling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879 E-ISSN 2289-7879

Aabid, Abdul and Chaudhary, Zakir Ilahi and Khan, Sher Afghan (2019) Modelling and analysis of convergent divergent nozzle with sudden expansion duct using finite element method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 34-51. ISSN 2289-7879

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 235-240. ISSN 2277-3878

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2019) Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2). pp. 211-221. ISSN 1511-788X E-ISSN 2289-7860

Aabid, Abdul and Jyothi, J and Zayan, Jalal Mohammed and Khan, Sher Afghan (2019) Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings. Advances in Materials Research, 8 (4). pp. 275-293. ISSN 2234-0912 E-ISSN 2234-179X

Aabid, Abdul and Khan, Ambareen and Mazlan, Nur Musfira and Ismail, Mohd Azmi and Akhtar, M. Nishat and Khan, Sher Afghan (2019) Numerical simulation of suddenly expanded flow at Mach 2.2. International journal of Engineering & Advanced Technology (IJEAT), 8 (3). pp. 457-462. ISSN 2249-8958

Abd Rahman, Badruzzaman and Mohd Sohimin, Muhammad H F and Meor Said, Mior A and Tuan Kamaruddin, Tengku Nordayana Akma and Abu Husain, Nurulakmar and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility assessment and a proposed performance scoring for ASEAN NCAP. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Abdul Halim, Abdul Karim and Syed Mohamed Ali, Jaffar and Erwin, Sulaeman (2019) Prediction of buckling mode for simply supported stiffened thin plates subject to inplane loading. In: 11th International Conference On Numerical Analysis In Engineering Conference In Numerical Analysis In Engineering (NAE) 2019, 20th-22 August 2019, Bangi, Selangor. (Unpublished)

Abdullah, Muhammad and Rossiter, John Anthony (2019) Using laguerre functions to improve the tuning and performance of predictive functional control. International Journal of Control. ISSN 0020-7179 (In Press)

Abdullah, Nur Azam and Akbar, Mahesa and Wirawan, Nanda and Curiel-Sosa, Jose Luis (2019) Structural integrity assessment on cracked composites interaction with aeroelastic constraint by means of XFEM. Composite Structures. ISSN 0263-8223

Adedi, Muhammad Rahman and Syed Mohamed Ali, Jaffar and Hrairi, Meftah (2019) A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 749-753. ISSN 2249 – 8958

Afzal, Asif and Khan, Sher Afghan and Saleel, Ahmed (2019) Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids. Materials Research Express, 6 (11). pp. 1-13. ISSN 2053-1591 E-ISSN 2053-1591

Ahmad, Kartini and Hanouf, Zahir (2019) Stagnation-point flow of Casson fluid in Darcy-Forchheimer porous media with newtonian heating effect. Journal of Engineering and Applied Sciences, 14 (2). pp. 315-319. ISSN 1816-949X

Ahmad, Kartini and Wahid, Zaharah and Hanouf, Zahir (2019) Mixed convection casson fluid flow over an exponentially stretching sheet with Newtonian heating effect. Journal Of Mechanics Of Continua And Mathematical Sciences, Special Issue (1). pp. 203-214. ISSN 0973-8975 E-ISSN 2454-7190

Ahmad, Salmiah and Syed Badruddin, Syarifah Nuratikah and Nik Hashim, Nik Nur Wahidah and Embong, Abd Halim and Altalmas, Tareq, M. and Shahbudin Hassan, Surul (2019) The modeling of the Quranic alphabets’ correct pronunciation for adults and children experts. In: 2019 2nd International Conference on Computer Applications & Information Security (ICCAIS), 1st-3rd May 2019, Riyadh, Kingdom of Saudi Arabia.

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879

Ahmed, Zaheer and Syed Mohamed Ali, Jaffar and Rafeeq, Mohammed and Hrairi, Meftah (2019) Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1139-1148. ISSN 2278-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Control of CD nozzle flow using microjets at Mach 2.1. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 631-635. ISSN 2278-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Effects of micro jets on the flow field of the duct with sudden expansion. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 636-640. E-ISSN 2277-3075

Akhtar, Mohammad Nishat and Abu Bakar, Elmi and Aabid, Abdul and Khan, Sher Afghan (2019) Numerical simulations of a CD nozzle and the influence of the duct length. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S2). pp. 622-630. ISSN 2278-3075

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. (2019) Conflicts and delays in mega construction projects – Kuwait International Airport Cargo City. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 927-939. ISSN 2249 - 8958

Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. and Al-Juboori, Salloom A. (2019) Conflict management of construction projects – a case study Kuwait International Airport Cargo City. International Journal of Mechanical Engineering (IJME), 8 (3). pp. 45-54. ISSN 2319-2240 E-ISSN 2319-2259

Ali, Said and Islam, Mazharul and Mohiuddin, A. K. M. and Idres, Moumen (2019) Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 153-157. ISSN 2277-3878 E-ISSN 2249-8958

Andan, Amelda Dianne and Lee, Duck-Joo (2019) Discrete tonal noise of NACA0015 airfoil at low reynolds number. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 129-145. ISSN 2289-7879

Arifutzzaman, A. and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Stability investigation of water based exfoliated graphene nanofluids. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arslan, Ahmed and Hassan, Masjuki and M. M., Quazi and Abul Kalam, Mohammad and Varman, Mahendora and Chattha, Jamshaid Anwar and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Imran, Muhammad and Zakaria, Muhammad Zulfattah and Anwar, Muhammad Tuoqeer and Gohar, Ghulam Abbas and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-9. E-ISSN 2053-1591 (In Press)

Asadullah, Mohammed and Khan, Sher Afghan and Soudagar, Manzoore Elahi M and T. R., Vaishak (2019) A comparison of the effect of single and multiple cavities on base flows. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 241-245. ISSN 2277-3878

Azami, Muhammad Hanafi (2019) Investigation of three-shaft high-bypass-ratio engine performance and emission prediction using alternative fuels. Project Report. UNSPECIFIED. (Unpublished)

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experimental research of wall pressure distribution and effect of micro jet at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 1000-1003. E-ISSN 2277-3878

Azami, Muhammad Hanafi and Faheem, Mohammed and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Inspection of supersonic flows in a CD nozzle using experimental method. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S3). pp. 996-999. ISSN 2277-3878

Azami, Muhammad Hanafi and Mustafa, Muhamad Zaki and Savill, Mark and Li, Yi-Guang (2019) Modelling the performance of aero-gas turbine engine using algae-based biofuel with emission prediction. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Azami, Muhammad Hanafi and Noorazman, Zahid and Savill, Mark and Li, Yi-Guang and Hilmi, Mohd Radzi (2019) Modelling the performance and emission prediction of RB211 aero-gas turbine engine fuelled by Jatropha-based biofuel. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Azami, Muhammad Hanafi and Savill, Mark (2019) Performance and emission trade-off assessment for aero-gas turbine engine. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 270-276. ISSN 2277-3878

Bin Mohamed Rehan, Muhammad Saifuddin and Wan Roselan, Wan Asma Diana and Karim, Mohamed Rehan (2019) Addressing GHG emissions from land transport in a developing country. In: 2019 Theory and Technique International Aerosol Conference, T and T IAC 2019 and Malaysia Air Quality Annual Symposium, MAQAS 2019;, 7 - 10 Aug 2019, Malacca.

Butt, Mohammad Mursaleen and Ahmad, Sheikh Nazir and Al-Robian, Abdulrehman A and Khan, Sher Afghan (2019) Finite element modeling and analysis of a debonded smart beam in actuation. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 258-263. ISSN 2277-3878

Delvi, Hamza Afser and Faheem, Mohammed and Khan, Sher Afghan and Kumar M., Kiran and Kareem Ullah, Mohammad (2019) Effect of ethanol-gasoline blends on performance, combustion and emission characteristics of spark ignition engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 209-220. ISSN 2289-7879

Faheem, Mohammad and Kareem Ullah, Mohammad and Aabid, Abdul and Mokashi, Imran and Khan, Sher Afghan (2019) Experiment on of nozzle flow with sudden expansion at Mach 1.1. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1769-1775. E-ISSN 2277-3878

Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

G M, Fharukh and Khan, Sher Afghan (2019) Control of nozzle flow using microjets at supersonic Mach Regime. International Journal of Engineering, 32 (7). pp. 991-998. ISSN 1025-2495 E-ISSN 1735-9244

G. M, Fharukh Ahmed and Khan, Sher Afghan (2019) Role of active control in increasing base pressure at Sonic Mach Number. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 966-970. E-ISSN 2277-3878

G. M., Fharukh Ahmed and Khan, Sher Afghan (2019) Effect of area ratio on base pressure and control effectiveness. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 953-958. E-ISSN 2277-3878

Ganat, Tarek A. and Hrairi, Meftah (2019) Effect of flow patterns on two-phase flow rate in vertical pipes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 150-160. ISSN 2289-7879

Ganat, Tarek A. and Hrairi, Meftah (2019) Gas–liquid two-phase upward flow through a vertical pipe. In: Selected Problems in Fluid Flow and Heat Transfer. MDPI, Basel, Switzerland, pp. 198-220. ISBN 978-3-03921-427-3

Ganat, Tarek A. and Hrairi, Meftah and Belladonna, Maulianda and Eghbal, Motaei (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer, 55 (8). pp. 2137-2151. ISSN 0947-7411 E-ISSN 1432-1181

Ganat, Tarek A. and Hrairi, Meftah and Regassa, Shiferaw (2019) Experimental investigation of gas–oil–water phase flow in vertical pipes: influence of gas injection on the total pressure gradient. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 3071-3078. ISSN 2190-0558 E-ISSN 2190-0566

Ganat, Tarek A. and Ridha, Syahrir and Hrairi, Meftah and Arisa, Juhairi and Gholami, Raoof (2019) Experimental investigation of high‑viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. Journal of Petroleum Exploration and Production Technology, 9. pp. 2911-2918. ISSN 2190-0558 E-ISSN 2190-0566

Gul, Mustabshirha and Hassan, Masjuki and Abul kalam, Mohammad and Zulkifli, Nurin Wahidah and Mujtaba, M. A. (2019) A review: role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13 (1). pp. 1-22. ISSN 1939-1234 E-ISSN 1939-1242 (In Press)

Gunawan, Teddy Surya and Ismail, Md Yusof and Ihsan, Sany Izan (2019) On the selection of culminating courses for outcome-based education evaluation at engineering education. In: International Conference on E-Learning 2019, 21st-22nd August 2019, Kuching, Sarawak.

Hamizi, Ilya Bashiera and Khan, Sher Afghan (2019) Aerodynamics investigation of delta wing at low Reynold’s number. CFD letters, 11 (2). pp. 32-41. ISSN 2180-1363

Hamza, Mohammad Ameer and Jameel, Ahmad Tariq and Asrar, Waqar (2019) A comparative study of two different numerical schemes for the simulation of nonlinear dynamics of heated falling thin films. International Journal of Recent Technology and Engineering, 7 (6). pp. 100-105. ISSN 2277-3878

Hasbullah, Faried and Faris, Waleed Fekry and Darsivan, Fadly Jashi and Abdelrahman, Mohammad (2019) Ride comfort performance of a non-linear full-car using active suspension system with active disturbance rejection control and input decoupling transformation. International Journal of Heavy Vehicle Systems, 26 (2). pp. 188-224. ISSN 1744-232X E-ISSN 1741-5152 (In Press)

Hrairi, Meftah (2019) Investigation of piezoelectric actuation effect on fracture toughness of isotropic materials. Research Report. UNSPECIFIED. (Unpublished)

Hrairi, Meftah and Daoud, Jamal Ibrahim and Zakaria, Faiz (2019) Optimization of incremental sheet metal forming process using grey relational analysis. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 246-252. ISSN 2277-3878

Ibren, Mohamed and Sulaeman, Erwin and Legowo, Ari and Abdullah, Nur Azam (2019) Roll control reversal of variable swept wing in supersonic flow. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 288-291. ISSN 2249-8958 E-ISSN 2277-3878

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 44-47. ISSN 2277-3837

Idres, Moumen and Okasha, Mohamed Elsayed Aly Abd Elaziz (2019) Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Ihsan, Sany Izan and Mohiuddin, A. K. M. and Syed Abu Bakar, Syed Noh and Rosili, Sarah Shamila (2019) Experimental study on low temperature power generator. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Isa, Wan Tarmizi and Saharin, Sanisah and Wan Salim, Wan Wardatul Amani (2019) Battery characterization of hybrid car. International Journal of Recent Technology and Engineering, 7 (6). pp. 143-146. ISSN 2277-3878

Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin and Fatai, Sado and Legowo, Ari (2019) Performance evaluation of linear quadratic regulator and linear quadratic Gaussian controllers on quadrotor platform. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 191-195. ISSN 2277-3878 E-ISSN 2249-8958

Islam, Saiful and Saleh, Tanveer and Mohd Razib, Mohd Asyraf and Mohamed Ali, Mohamed Sutan (2019) An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat. Materials Research Express, 6 (2). pp. 1-8. E-ISSN 2053-1591

Jaafar, Abdul Hassan and Rahman, Mohammed Ataur (2019) Study on the intelligent control system of EMA-CVT. International Journal of Recent Technology and Engineering (IJRTE), 7 (65). pp. 48-53. ISSN 2277-3878

Khan, Shaheer Ahmed and Rahman, Mohammed Ataur (2019) Efficiency of thin film photovoltaic paint: a brief review. Blue Eyes Intelligence Engineering & Sciences Publication, 7 (6S). pp. 163-169. ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Chaudhary, Zakir Ilahi (2019) Influence of control mechanism on the flow field of duct at Mach 1.2 for area ratio 2.56. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1135-1138. ISSN 2278-3075

Khan, Sher Afghan and Aabid, Abdul and Ghasi, Fharukh Ahmed Mehaboobali and Al-Robaian, Abdulrahman and Alsagri, Ali Sulaiman (2019) Analysis of area ratio in a CD nozzle with suddenly expanded duct using CFD method. CFD Letters, 11 (5). pp. 61-71. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Ahmad, Zaheer (2019) Effect of micro jet control on the flow filed of the duct at Mach 1.5. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1758-1762. E-ISSN 2277-3878

Khan, Sher Afghan and Aabid, Abdul and Mokashi, Imran and Al-Robaian, Abdul Rehman Abdullah and Alsagri, Ali Sulaiman (2019) Optimization of two-dimensional wedge flow field at supersonic Mach number. CFD Letters, 11 (5). pp. 80-97. ISSN 2180-1363

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahamad C. (2019) CFD simulation with analytical and theoretical validation of different flow parameters for the wedge at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 19 (1). pp. 170-177. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Aabid, Abdul and Saleel, Ahmed (2019) Influence of micro jets on the flow development in the enlarged duct at supersonic Mach number. International Journal of Mechanical & Mechatronics Engineering, 19 (1). pp. 70-82. ISSN 2227-2771 E-ISSN 2077-124X

Khan, Sher Afghan and Ahmad, Zaheer and Aabid, Abdul and Mokashi, Imran (2019) Experimental research on flow development and control effectiveness in the duct at high speed. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S8). pp. 1763-1768. E-ISSN 2277-3878

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Khan, Abdul Mohsin (2019) Grooved cavity as a passive controller behind backward facing step. International Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 185-193. ISSN 2289-7879

Khan, Sher Afghan and Alrobaian, Abdul Rahman and Asad Ullah, Mohammed and Rao, Ashwin (2019) Threaded spikes for bluff body base flow control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 194-203. E-ISSN 2289-7879

Khan, Sher Afghan and Mohiuddin, M and Saleel, Ahmad C and G M, Fharukh (2019) Investigation of the effects of nozzle exit mach number and nozzle pressure ratio on axisymmetric flow through suddenly expanded nozzles. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3). pp. 570-578. E-ISSN 2249 – 8958

Khan, Sher Afghan and Mokashi, Imran and Aabid, Abdul and Faheem, Mohammad (2019) Experimental research on wall pressure distribution in C-D nozzle at Mach number 1.1 for area ratio 3.24. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 971-975. E-ISSN 2277-3878

Kharulaman, Liyana and Aabid, Abdul and Mehaboobali, Fharukh Ahmed Ghasi and Khan, Sher Afghan (2019) Research onFlows for NACA 2412 airfoil using computational Fluid dynamics method. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 5450-5456. ISSN 2249 – 8958

Ladipo, Ismail and Ridhuan Siradj, Fadly Jashi Darsivan and Waleed, Fekry Faris (2019) Computational validation of magnetorheological elastomers for engine mount application. International Journal of Recent Technology and Engineering, 7 (6S). pp. 180-184. E-ISSN 2277-3878

Legowo, Ari and Sulaeman, Erwin and Rosli, Danial (2019) Review on system identification for quadrotor Unmanned Aerial Vehicle (UAV). In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26th March-10th April 2019, Dubai, United Arab Emirates.

Legowo, Ari and Sulaeman, Erwin and Rosli, Muhammad Danial (2019) Developing magnetic damper system for microsatellite. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 93-99. ISSN 2277-3878 E-ISSN 2249-8958

Maidul, Isla and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin (2019) A Model Predictive Control (MPC) approach on unit quaternion orientation based quadrotor for trajectory tracking. International Journal of Control, Automation and Systems, 17 (11). pp. 2819-2832. ISSN 1598-6446 E-ISSN 2005-4092

Malik, Khurshid and Aldheeb, Mohammad and Asrar, Waqar and Sulaeman, Erwin (2019) Effects of bio-inspired surface roughness on a swept back tapered NACA 4412 wing. Journal of Aerospace Technology and Management, 11. e1719. ISSN 1984-9648 E-ISSN 2175-9146

Meor Said, Mior A and Mohd Sohimin, Muhammad H F and Abu Hussain, Nurulakmar and Abd Rahman, Badruzzaman and Tuan Kamaruddin, Tengku Nordayana Akma and Mohamad Jamil, Siti Nurnadilla and Balaka, Ridway and Abu Kassim, Khairil A (2019) Rearward visibility technology in ASEAN market. In: 4th International Conference & Sustainable Mobility (ICSM), 21st-22nd November 2019, Bali, Indonesia. (Unpublished)

Mohamed Ali, Jaffar Syed and Mir Owais, Ali Ibrahim and Miah Mohammed, Riyadh (2019) Educational software for stress analysis of non-idealized closed thin-walled sections. International Journal of Engineering & Technology, 7 (6S). pp. 196-202. E-ISSN 2277-3878

Mohammed, Mohammed Idris and Sulaeman, Erwin and Musthapa, Faizal (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878 E-ISSN 2249-8958

Mohammed Kh Th E, Aalazemi and Mohiuddin, A. K. M. (2019) Construction project in Kuwait international airport cargo city: issue of conflict management. International Journal of Engineering Materials and Manufacture, 4 (2). pp. 59-65. E-ISSN 1757-899X

Mohd, Umair Siddique and Ansari, Emaad and Khan, Sher Afghan and Gulhane, Nitin Parashram and Patil, Rajesh (2019) Numerical investigation of nondimensional constant and empirical relation representing nusselt profile nonuniformity. Journal of Thermophysics and Heat Transfer, 34 (1). pp. 215-229. ISSN 0887-8722 E-ISSN 1533-6808

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modeling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 6820-6828. ISSN 2249-8958

Mohd Zakuan, Muhammad Amir Mirza and Aabid, Abdul and Khan, Sher Afghan (2019) Modelling and structural analysis of three-dimensional wing. International Journal of Engineering and Advanced Technology, 9 (1). pp. 6820-6828. ISSN 2249-8958

Mohd Hafidz, N.S. and Mohamed Rehan, Muhammad Saifuddin (2019) Experimental testing of oil palm fibre composite manufactured via vacuum bagging method. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Mohd Sajali, Muhammad Fahmi and Aabid, Abdul and Khan, Sher Afghan and Mehaboobali, Fharukh Ahmed Ghasi and Sulaeman, Erwin (2019) Numerical investigation of flow field of a non-circular cylinder. CFD Letters, 11 (5). pp. 37-49. ISSN 2180-1363

Mohd Umair, Siddique and Ansari, Emad and Khan, Sher Afghan and Alrobaian, Abdulrahman (2019) On numerical investigation of semi-empirical relation representing development length for a fluid flow in a closed conduit. CFD Letters, 11 (6). pp. 63-71. E-ISSN 2180-1363

Mohiuddin, A. K. M. and Osman, Amirah and Uddin, Mohammad Faisal (2019) Development and investigation of a cooling system for a parked vehicle using solar energy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 87-92. ISSN 2277-3878 E-ISSN 2249-8958

Mollik, Md. Sazib and Rashid, Muhammad M. and Rahman, Mohammed Ataur and Hasan, Abul (2019) Temperature effect and battery charging characteristics analysis based on charging C-rate. International Journal of Engineering and Advanced Technology, 9 (1). pp. 159-165. ISSN 2249 – 8958

Mondal, Kuheli and Das, Saurav and Hamada, Nozomu and Haji Abu, Aminudin and Das, Saikat and Faris, Waleed Fekry and Toh, Hoong Thiam and Ahmad, Akij (2019) An improved narrowband active noise control system without secondary path modelling based on the time domain. International Journal of Vehicle Noise and Vibration, 15 (2-3). pp. 110-132. ISSN 1479-1471

Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) An effect of sweep angle on roll damping derivative for a Delta wing with curved leading edges in unsteady flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (2). pp. 361-373. ISSN 2249-6890 E-ISSN 2249-8001

Monis, Renita Sharon and Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan (2019) Effect of sweep angle and a half sine wave on roll damping derivative of a Delta Wing. International Journal of Recent Technology and Engineering, 8 (2S3). pp. 984-989. E-ISSN 2277-3878

Mukhtar, Azfarizal and Ng, Khai Ching and Yusoff, Mohd Zamri and Wah, Yen Tey and Lit, Ken Tan (2019) Performance assessment of passive heating and cooling techniques for underground shelter in equatorial climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 20-32. E-ISSN 2289-7879

Mukhtar, Azfarizal and Yusoff, Mohd Zamri and Ng, Khai Ching (2019) The potential influence of building optimization and passive design strategies on natural ventilation systems in underground buildings: The state of the art. Tunnelling and Underground Space Technology, 92. pp. 1-18. ISSN 0886-7798

Nadimalla, Altamashuddinkhan and Masjuki, Siti Aliyyah and Khan, Sher Afghan and Pradeep, Aksatha (2019) The effect of replacement of natural sand by manufactured sand on the properties of the concrete. In: 5th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS) 2018, 22nd-23rd Nov. 2018, Bangkok, Thailand.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Idres, Moumen and Ghaffar, Alia (2019) Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 253-257. ISSN 2277-3878

Pathan, Khizar Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Influence of expansion level on base pressure and reattachment length. CFD Letters, 11 (5). pp. 22-36. ISSN 2180-1363

Pathan, Khizar Ahmed and Syed, Ashfaq and Dabeer, Prakash S and Khan, Sher Afghan (2019) Analysis of parameters affecting thrust and base pressure in suddenly expanded flow from nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 1-18. ISSN 2289-7879

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Effect of nozzle pressure ratio and control jets location to control base pressure in suddenly expanded flows. Journal of Applied Fluid Mechanics, 12 (4). pp. 1127-1135. ISSN 1735-3572 E-ISSN 1735-3645

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2019) Investigation of base pressure variations in internal and external suddenly expanded flows using CFD analysis. CFD Letters, 11 (4). pp. 32-40. ISSN 2180-1363

Rafia, Afroz and Rahman, Mohammed Ataur and Muhib, Md. Muhibbullah and Morshed, Niaz (2019) Malaysian automobile industry and green supply chain management. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 158-162. ISSN 2277-3878

Rahman, Mohammed Ataur and Hassan, Nurul and Jaffar, Abdul Hassan and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2019) Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 147-152. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Mohammed Ataur and Jaafar, Abdul Hassan (2019) Development of rapid charging system for EV battery. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 292-297. ISSN 2277-3878

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Md Daud, Badrul (2019) Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 298-303. ISSN 2277-3878

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Sakif, Ahsan (2019) Development of electro-hydro automatic parking braking system for automotive system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 264-269. ISSN 2277-3878 E-ISSN 2249-8958

Rahman, Tariq Md Ridwanur and Asrar, Waqar and Khan, Sher Afghan (2019) An Investigation of RANS simulations for swirl-stabilized isothermal turbulent flow in a gas turbine burner. CFD Letters, 11 (9). pp. 14-31. ISSN 2180-1363 E-ISSN 2180-1363

Ramli, Nabilah and Wan Nordin, Mimi Aminah (2019) IIUM integrated design project framework for SDG innovation. In: The Transformers Summit 2019, 01-09 Dec 2019, Dakar, Senegal. (Unpublished)

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy based obstacle avoidance system for autonomous mobile robot. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Rashed, Almutairi Saleh and Faris, Waleed Fekry and Fatai, Sado (2019) Fuzzy-based collision avoidance system for autonomous driving in complicated traffic scenarios. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2018), 20th Oct. 2018, Shah Alam, Selangor.

Renita, Sharon Monis and Crasta, Asha and Khan, Sher Afghan (2019) Evaluation of stiffness derivative for a delta wing with straight leading edges in unsteady flow. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 754-762. ISSN 2249 – 8958

Renita, sharon Monis and Crasta, Asha and Faheem, Mohammed and Khan, Sher Afghan (2019) Analysis of damping derivatives for delta wings in hypersonic flow for curved leading edges with full sine wave. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 5457-5466. ISSN 2249-8958

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2019) Estimation of damping derivatives for delta wings in hypersonic flow for straight leading edge. International Journal of Mechanical and Production Engineering Research and Development, 9 (5). pp. 255-264. ISSN 2249-6890 E-ISSN 2249-8001

Revichandran, Rajeanderan and Mohiuddin, A. K. M. (2019) Two-phase thermosyphon filled with R410A refrigerant operating at low evaporator temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 9-20. ISSN 2289-7879

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Experimental investigation of straight shape thermosyphon filled with R410A refrigerant. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 271-278. ISSN 2088-5334 E-ISSN 2460-6952

Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Factors affecting thermosyphon performance- A review of studies. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 124-133. ISSN 2277-3878

Rossiter, John Anthony and Abdullah, Muhammad (2019) A new paradigm for predictive functional control to enable more consistent tuning. In: 2019 American Control Conference, ACC 2019, 10-12 July 2019, Philadelphia, USA.

Ruslam, Muhammad U.H. and Ridhuan Sirad, Fadly Jashi Darsivan (2019) Parametric study of ground vehicle suspension system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 284-287. E-ISSN 2277-3878

Rusli, Farah Zulyana and Ridhuan Siradj, Fadly Jashi Darsivan (2019) The effect of hydraulic damper characteristics on the ride and handling of ground vehicle. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 113-118. ISSN 0277-3878

S, Parashurama and Saleel, C. Ahmed and M. S., Govindegowda and Khan, Sher Afghan (2019) Hydrocarbons as alternative refrigerants in domestic refrigerators. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 496-501. ISSN 2278-3075

Sajali, Muhammad Fahmi Mohd and Syed, Ashfaq and Aabid, Abdul and Khan, Sher Afghan (2019) Simulation of effect of various distances between front and rear body on drag of a non-circular cylinder. Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 53-65. ISSN 2289-7879

Seprianto, Dicky and ., Iskandar and R., Wilza and Adesta, Erry Yulian Triblas (2019) Influence of internal fill pattern, polishing time and Z-Axis orientation on the tensile strength of the 3D printed part. International Journal of Recent Technology and Engineering, 7 (6). pp. 170-174. ISSN 2277-3878

Sethuraman, Vigneshvaran and Rajendran, Parvathy and Khan, Sher Afghan (2019) A cost-effective data acquisition instrumentation for measurement of base pressure and wall pressure in suddenly expanded flow through ducts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 112-123. E-ISSN 2289-7879

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Damping derivative evaluation in pitch for an ogive at high mach numbers. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 1307-1317. E-ISSN 2278-3075

Shabana, Aysha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2019) Estimation of stiffness derivative of an ogive for specific heat ratio 1.666. Test Engineering and Management, 81 (11-12). pp. 5091-5100. ISSN 0193-4120

Siddiqi, Mohammad Umar and Gulhane, P. Nitin and Khan, Sher Afghan and Taler, Jan and Cebula, Arthur and Oclon, Pawel and Patil, Rajesh (2019) Numerical investigation of semiempirical relations representing the local Nusselt number magnitude of a pin fin heat sink. Heat Transfer—Asian Research, 48 (5). pp. 1857-1888. ISSN 1099-2871 E-ISSN 1523-1496

Siddique, Mohd Umair and Gulhane, N P and Al-Robaian, Abdul Rehman A and Khan, Sher Afghan (2019) On numerical investigation of semi-empirical relations representing local nusselt number at lower nozzle-target spacing’s. International Journal of Engineering, 32 (1). pp. 137-145. ISSN 1025-2495 E-ISSN 1735-9244

Siddique, Mohd Umair and Khan, Sher Afghan and Al-Robaian, Abdulrahman and Ansari, Eman (2019) Numerical study of heat transfer augmentation using pulse jet impinging on Pin Fin heat sink. CFD letters, 11 (3). pp. 84-91. ISSN 2180-1363

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Hilmy, Irfan and Badran, Marwan A A (2019) Convergence and error analysis of a bi-quadratic triangular galerkin finite element model for heat conduction simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 78-86. ISSN 2289-7879

Syahir, A. Z. and Mohd Zulkifli, Nurin Wahidah and Hassan, Masjuki and Abul Kalam, Mohammad and Harith, M. H. and Yusoff, M. N.A.M. and Zulfattah, Z. M. and Jamshaid, Muhammad (2019) Tribological improvement using ionic liquids as additives in synthetic and bio-based lubricants for steel-steel contacts. Tribology Transactions, 63 (2). pp. 235-250. ISSN 1040-2004 E-ISSN 1547-397X

Syed Mohamed Ali, Jaffar and M. Saleh, Mubin (2019) Experimental and numerical study on the aerodynamics and stability characteristics of a canard aircraft. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 165-174. ISSN 2289-7879

Syed Mohamed Ali, Jaffar and Mahmood, Munir Mohamed and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Shape control of composite plates with piezoelectric actuators. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 219-223. ISSN 2277-3878

Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Nasikin, Mohd Faiz Diuzzaman (2019) Numerical and experimental study on the effect of cab- extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 61-68. ISSN 2289-7879

Umair, Siddiqui and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2019) On numerical investigation of nusselt distribution profile of heat sink using lateral impingement of air jet. CFD Letters, 11 (9). pp. 59-68. ISSN 2180-1363

Wan Yahya, M.Z. and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Warimani, Mohammad Salman (2019) Modelling of a three-shaft high-bypass-ratio engine performance and emission prediction using hydrogen fuels. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S3). pp. 484-490. ISSN 2278-3075

Warimani, Mahammad Salaman and Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Investigation of aircraft engine performance utilizing various alternative fuels. In: Southeast Asia Workshop on Aerospace Engineering (SAWAE 2019), 29 - 30 Aug 2019, Kuala Lumpur.

Warimani, Mohammad Salman and Azami, Muhammad Hanafi and Khan, Sher Afghan and Ismail, Ahmad Faris (2019) Study of feasibility of pulse detonation engine powered by alternative fuels. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 291-296. ISSN 2249–8958

Warimani, Mohammadsalman and Azami, Muhammad Hanafi and Khan, Sher Afghan (2019) Challenges and solutions for using liquid fuels in aviation industry. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2s2). pp. 288-290. ISSN 2249–8958

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati (2019) Application of air ionizer to remove electrostatic discharge (ESD) dust for plastics material in automotive painting process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 29-37. ISSN 2289-7879

Yosri, Muhammad Hafizan and Muhamad, Pauziah and Mohd Yatim, Norfazrina Hayati (2019) Evaluation of air flow pattern for conceptual design of automotive painting line using Computational Fluid Dynamic (CFD) for better dust particle reduction. CFD Letters, 11 (2). pp. 42-49. ISSN 2180-1363

Zaidi, Syeda Kanwal and Hasan, Syed Faraz and Gui, Xiang and Sidduque, Nazmul and Ahmad, Salmiah (2019) Exploiting UAV as NOMA based relay for coverage extension. In: International conference on Computer Applications & Information Security, ICCAIS'2019., 1-3 May 2019, Riyadh, Kingdom of Saudi arabia.

Zainan, Nur Hidayah and Mohammed Sapardi, Mohd Azan and Ho, Bernard Chon Han and Siajam, Shamsul Izhar and Mustapa Kamal, Siti Mazlina and Danquah, Michael K. and Harun, Razif (2019) Kinetic and thermodynamic characterization of amino acids generation via subcritical water reaction of microalgae Nannochloropsis sp. biomass. Biomass Conversion and Biorefinery. pp. 1-14. ISSN 2190-6815 E-ISSN 2190-6823

Zakaria, Mushab and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mat Sah, Mohd Azizi (2019) Spring back of thick curved uni-directional carbon fibre reinforced composite laminate for aircraft structure application. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 224-228. ISSN 2277-3878

Zulkepli, I.I. and Mokhtar, Hanan and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohamed Rehan, Muhammad Saifuddin (2019) Review of manufacturing process for good quality of composite assessment. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

ramli, nabilah (2019) Blockchain- Rapid diagnostic tests for vector borne disease control. In: Sweden Malaysia Symposium, 10-11 July 2019, Vadstena, Sweden. (Unpublished)