Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2017
![]() | Up a level |
Article
Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X
Abdullah, Muhammad and Rossiter, John Anthony and Haber, Robert (2017) Development of constrained predictive functional control using laguerre function based prediction. IFAC-PapersOnLine, 50 (1). pp. 10705-10710. ISSN 2405-8963
Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Taylor, Zeike A. and Tafazzolimoghaddam, Behrooz and Martinez Vicente, J.L. and Zhang, Chao (2017) Transversal crack and delamination of laminates using XFEM. Composite Structures, 173. pp. 78-85. ISSN 0263-8223
Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures, 28 (10). pp. 1334-1345. ISSN 1045-389X E-ISSN 1530-8138
Afzal, Asif and Samee, Mohammad and Khan, Sher Afghan (2017) Comparative heat transfer analysis in different mini-channel heat sinks. International Journal of Recent Research Aspects, 4 (4). pp. 41-45. ISSN 2349-7688
Ahmed, Hamdi E. and Yusoff, M.Z. and Hawlader, Mohammad Nurul Alam and Ahmed, Mirghani Ishaq and Salman, B. H. and Kerbeet, A. Sh (2017) Turbulent heat transfer and nanofluid flow in a triangular duct with vortex generators. International Journal of Heat and Mass Transfer, 105. pp. 495-504. ISSN 0017-9310
Ahmed Siddiqui, Naseeb and Asrar, Waqar and Sulaeman, Erwin (2017) Literature review : Biomimetic and conventional aircraft wing tips. International Journal of Aviation, Aeronautics, and Aerospace, 4 (2). pp. 1-25. E-ISSN 2374-6793
Aibinu, Abiodun Musa and Onumanyi, Adeiza J. and Adedigba, A. P. and Ipinyomi, M. and Folorunso, T. A. and Salami, Momoh Jimoh Eyiomika (2017) Development of hybrid artificial intelligent based handover decision algorithm. Engineering Science and Technology, an International Journal, 20 (2). pp. 381-390. E-ISSN 2215-0986
Akhtaruzzaman, Md. and Shafie, Amir Akramin and Khan, Md. Raisuddin (2017) Quasi-inverse pendulum model of 12 DoF bipedal walking. International Journal of Automation and Computing, 14 (2). pp. 179-190. ISSN 1476-8186
Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1521. ISSN 0954-4100 E-ISSN 2041-3025
Azami, Muhammad Hanafi and Savill, Mark (2017) Comparative study of alternative biofuels on aircraft engine performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 231 (8). pp. 1509-1024. ISSN 0954-4100 E-ISSN 2041-3025
Azami, Muhammad Hanafi and Savill, Mark (2017) Pulse detonation assessment for alternative fuels. Energies, 10 (3). pp. 369-1. E-ISSN 1996-1073
Azami, Muhammad Hanafi and Savill, Mark and Li, Yi-Guang (2017) Comparison of aircraft engine performance and emission analysis using alternative fuels. International Journal of Sustainable Aviation, 3 (1). pp. 43-63. ISSN 2050-0467 E-ISSN 2050-0475
Bashir, Musavir and Khan, Sher Afghan (2017) Investigation on the prominence of abrupt expansion on the base pressure of an axi-symmetric body. International Journal of Recent Research Aspects, 4 (4). pp. 59-63. ISSN 2349-7688
Bashir, Musavir and Khan, Sher Afghan and Azam, Qummare and Janvekar, Ayub (2017) Computational and analytical investigation of aerodynamic derivatives of similitude delta wing model at hypersonic speeds. International Journal of Technology, 8 (3). pp. 366-375. ISSN 2086-9614
Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2017) Experimental investigation on the effectiveness of active control mechanism on base pressure at low supersonic mach numbers. Lecture Notes in Mechanical Engineering, PartF9. pp. 197-209. ISSN 2195-4356 E-ISSN 2195-4364 (In Press)
Djemana, Mohamed and Hrairi, Meftah and Al Jeroudi, Yazan (2017) Using electromechanical impedance and extreme learning machine to detect and locate damage in structures. Journal of Nondestructive Evaluation, 36 (2). pp. 1-10. ISSN 0195-9298 E-ISSN 1573-4862
Elmoselhy, Salah A.M. and Faris, Waleed Fekry and Rakha, Hesham A. (2017) Validated analytical modelling of supercharging centrifugal compressors with vaneless diffusers for H2-biodiesel dual-fuel engines with cooled EGR. International Journal of Hydrogen Energy, 42 (43). pp. 26771-26786. ISSN 0360-3199
Eshteyah, Mohanna Moh'd Saleem and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 86-93. E-ISSN 0128-1852
Faris, Waleed Fekry and Elmoselhy, Salah (2017) The true inventor of some early mechanical engineering devices and mechanisms. Al-Shajarah, 22 (1). pp. 29-64. ISSN 1394-6870
Haque, Anwar Ul and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2017) Defining reference area for prediction of aerodynamic coefficients of a biologically inspired hybrid buoyant vehicle. Unmanned Systems, 5 (4). pp. 237-246. ISSN 2301-3850
Hasan, Muhamad Abid and H. Shah, Qassim and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Perforation of polycarbonate sheet when subjected to impact test– A review. International Journal of Applied Engineering Research, 12 (24). pp. 14514-14522. ISSN 0973-4562 E-ISSN 0973-9769
Islam, Mazharul and Fürst, Jiri and Wood, David (2017) CFD analysis of SD 7003 airfoil at low reynolds number with a laminar kinetic energy based transition model. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3112-3117. ISSN 1819-6608
Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655
Mohamed Rehan, Muhammad Saifuddin and Rousseau, Jerome and Fontaine, Stephanie and Gong, Xiaojing (2017) Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates. Composite Structures, 161 (1). pp. 1-7. ISSN 0263-8223
Mohammed, Mohammed Idris and Mustapha, Faizal/F and Sulaeman, Erwin and Majid, Dayang Laila (2017) Sensor placement based on FE modal analysis: Dynamic characteristic of cable stayed Penang (I) bridge. International Research Journal of Engineering and Technology, 4 (9). pp. 145-151. ISSN 2395-0072 E-ISSN 2395-0056
Mohammed, Mohammed Idris and Sulaeman, Erwin and Mustafa, Faizal and Mohd Ariffin, Mohd Khairol A. (2017) Sensor placement based on static finite element data of cable stayed bridge. International Journal of Emerging Technology and Advanced Engineering, 7 (7). pp. 427-432. E-ISSN 2250-2459
Mohammed Sapardi, Mohd Azan and Hussam, Wisam K. and Potherat, Alban and Sheard, Gregory J. (2017) Linear stability of confined flow around a 180-degree sharp bend. Journal of Fluid Mechanics, 822. pp. 813-847. ISSN 0022-1120 E-ISSN 1469-7645
Mohiuddin, A. K. M. and Amer, Muhammad Yazid and Rahman, Mohammed Ataur and Khan, Ahsan Ali (2017) Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X
Mohiuddin, A. K. M. and Sabarudin, Mohamad Syabil and Khan, Ahsan Ali and Ihsan, Sany Izan (2017) Design and development of hybrid energy generator (photovoltaics) with solar tracker. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-6. E-ISSN 1757-899X
Monis, Renita Sharon and Shabana, Ayesha and Crasta, Asha and Khan, Sher Afghan (2017) Computation of stiffness derivative for an unsteady delta wing with curved leading edges. International Journal of Recent Research Aspects .., 4 (4). pp. 69-72. ISSN 2349-7688
Okasha, Mohamed Elsayed Aly Abd Elaziz and I, Shuib and Mahmoud Idres, Moumen Mohammed (2017) Investigation of Malaysian low earth orbits for remote sensing applications. IOP Conference Series: Materials Science and Engineering, 184 (012009). 012009-1. ISSN 1757-8981
Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2017) Predictive modeling of suddenly expanded flow process in the Supersonic Mach number regime using response surface methodology. International Journal of Recent Research Aspects, 4 (4). pp. 53-58. ISSN 2349-7688
Rafia, Afroz and Rahman, Mohammed Ataur (2017) Health impact of river water pollution in Malaysia. International Journal of Advanced and Applied Science, 4 (5). pp. 78-85. ISSN 2313-626X E-ISSN 2313-3724
Rahman, Mohammed Ataur and Aung, Kyaw Myu and Saifullah, Khalid and Rahman, Mizanur (2017) Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. International Journal of Advanced and Applied Sciences, 4 (5). pp. 35-40. ISSN 2313-626X E-ISSN 2313-3724
Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Amin and Khalid, Helmi (2017) Two-phase evaporative battery thermal management technology for EVs/HEVs: theory and control. International Journal of Automotive Technology, 18 (5). pp. 875-882. ISSN 1229-9138 E-ISSN 1976−3832
Rahman, Mohammed Ataur and Kyaw, Myo Aung and Rafia, Afroz (2017) Parametric study of palladium/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. International Journal of Engineering & Technology IJET-IJENS, 17 (1). pp. 13-24. ISSN 2077-1185 E-ISSN 2227-2712
Rahman, Mohammed Ataur and Rahman, Mizanur and Karim, Hafizzul (2017) The theory of the development of an electromagnetic engine for automotive use. International Journal of Advanced Robotics and Automation, 2 (1). pp. 1-8. ISSN 2473-3032 (In Press)
Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X
Ramli, Muhammad Faiz and Shamsudin, Syariful Syafiq and Legowo, Ari (2017) Obstacle detection technique using multi sensor integration for small unmanned aerial vehicle. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2). pp. 441-449. ISSN 2502-4752 E-ISSN 2502-4760
Shabana, Ayesha and Monis, Renita Sharon and Crasta, Asha and Khan, Sher Afghan (2017) Estimation of stability derivative of an oscillating cone in hypersonic flow. International Journal of Recent Research Aspectsh, 4 (4). pp. 46-52. ISSN 2349-7688
Shanbhag, Pavithra and Lavanya, S and Khan, Sher Afghan (2017) Estimation of stability derivatives of a wedges at supersonic Mach numbers. International Journal of Recent Research Aspects, 4 (4). pp. 64-68. ISSN 2349-7688
Syed Mohamed Ali, Jaffar and M.Y., Hasfareeza (2017) Crash analysis of an aircraft fuselage under belly landing. International Journal of Recent Research Aspects, 4 (4). pp. 73-76. ISSN 2349-7688
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin (2017) Effect of diamond shaped strut with cylindrical pitch rod in subsonic wind tunnel testing. Measurement: Journal of the International Measurement Confederation, 99. pp. 1-6. ISSN 0263-2241 E-ISSN 1536-6359
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2017) Wind tunnel testing of hybrid buoyant aerial vehicle. Aircraft Engineering and Aerospace Technology, 89 (1). pp. 99-105. ISSN 0002-2667
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2017) Yawing force of electric trimmers of a hybrid buoyant aerial vehicle. Pertanika J Sci and tech, 25 (1). pp. 293-302. ISSN 0128-7680 E-ISSN 2231-8526
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2017) Hybrid buoyant aircraft: future STOL aircraft for interconnectivity of the Malaysian islands. Journal of Aviation Technology and Engineering, 6 (2). pp. 80-88. ISSN 2159-6670
Yashodhar, V. and Humrutha, G. and Kaushik, M. and Khan, Sher Afghan (2017) CFD studies on triangular micro-vortex generators in flow control. IOP Conference Series: Materials Science and Engineering, 184 (1). 012007-1. ISSN 1757-8981
Zabet, Khaled and Rossiter, John Anthony and Haber, Robert and Abdullah, Muhammad (2017) Pole-placement predictive functional control for under-damped systems with real numbers algebra. ISA Transactions, 71. pp. 403-414. ISSN 0019-0578
Book Chapter
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2017) Effect of periodic drying on energy utilization, product quality, and drying time. In: Intermittent and nonstationary drying technologies: principles and applications. Advances in Drying Science and Technology . CRC Press - Taylor & Francis Group, Florida, USA, pp. 19-32. ISBN 9781138746299
Proceeding Paper
, Anwar-Ul-Haque and Nugraha, Fauzul and Erawan, Dadang F and Asrar, Waqar and Sulaeman, Erwin (2017) Structural design of hybrid buoyant aircraft's model for subsonic wind tunnel testing. In: 14th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 10th-14th January 2017, Islamabad, Pakistan.
Abd Kadir, Nurdina and Aminanda, Yulfian and Shaik Dawood, Mohd Sultan Ibrahim and Mokhtar, Hanan (2017) Numerical analysis of kraft paper honey comb subjected to uniform compression loading. In: International Conference on Materials Physics and Mechanics 2017, 23 July 2017, Langkawi, Kedah.
Abd Kadir, Nurdina and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohktar, Hanan (2017) A study on the parameters affecting the properties of coated paper honeycomb. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Abdullah, Nur Azam and Curiel-Sosa, J.L. and Taylor, Zeike A. and Tafazzolimoghaddam, Behrooz and Vicente, J.L Martinez (2017) Modelling of transversal crack and delamination under traction with XFEM. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)
Abdullah, Nur Azam and Curiel-Sosa, Jose Luis and Akbar, Mahesa (2017) Flutter assessment on composite plate with crack by means of fully coupled Finite Element and Doublet Lattice Method. In: 3rd International Conference on Mechanics of Composites (MechComp 2017), 4th-7th July 2017, Bologna, Italy. (Unpublished)
Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Ahmad Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Mohamed Ali, Jaffar Syed (2017) Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur.
Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Nordin, Rosmarina (2017) Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.
Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July 2016, Kuala Lumpur, Malaysia.
Altaf, Afaq and Thong, Tan Boon and Omar, Ashraf Ali and Asrar, Waqar (2017) Experimental investigation of the influence of a reverse delta type add-on device on the flap-tip vortex of a wing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Bashir, Musavir and Khan, Sher Afghan and Udayagiri, Leelanadh and Noor, Asim (2017) Dynamic stability of unguided projectile with 6- DOF trajectory modeling. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.
Curiel-Sosa, J.L. and Tafazzolimoghaddam, Behrooz and Navarro-Zafra, Joaquin and Akbar, Mahesa and Abdullah, Nur Azam and Ahmad, Meor iqram Meor (2017) Modelling techniques for delamination and fracture of composites. In: 7th International Conference on Mechanics and Materials in Design,, 11th-15th June 2017, Albufeira, Portugal.
Djemana, Mohamed and Hrairi, Meftah (2017) Impedance based detection of delamination in composite structures. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam (2017) Validation of ESP oil wells measured parameters using simulation olga software. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Ghazilan, A. L.Ahmad and Mokhtar, Hanan and Shaik Dawood, Mohd Sultan Ibrahim and Aminanda, Yulfian and Mohamed Ali, Jaffar Syed (2017) Effect of stitching on the tensile mechanical property of empty fruit bunch oil palm fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.
Hamza, Mohammad Ameer and Jameel, Ahmad Tariq and Asrar, Waqar and Hoda, Asif (2017) Numerical simulation of non-isothermal thin liquid film flow on inclined plane using an implicit finite difference scheme. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Hanash, Ebrahim and Karim, A.N. Mustafizul and Tuan, SaravananTanjong and Mohiuddin, A. K. M. (2017) Throughput enhancement of car exhaust fabrication line by applying MOST. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Hanouf, Zahir and Faris, Waleed Fekry and Ahmad, Kartini (2017) An investigation into NVC characteristics of vehicle behaviour using modal analysis. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Ismail, Ahmad Faris (2017) Prediction of steam turbine performance as a waste heat recovery mechanism on naturally aspirated spark ignition engine using artificial neural network. In: 2016 3rd International Conference on Soft Computing & Machine Intelligence (ISCMI 2016 ), 23rd-25 November 2016, Dubai, UAE.
Hrairi, Meftah (2017) 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016. In: "3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016", 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur; Malaysia.
Idres, Moumen and Mustapha, O and Okasha, Mohamed Elsayed Aly Abd Elaziz (2017) Quadrotor trajectory tracking using PID cascade control. In: AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.
Ihsan, Sany Izan and Mohamad Safian, Mohamad Ariff Iskandar and Mohd Taufek, Muhammad Aliff and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th - 27th July 2016, Kuala Lumpur, Malaysia.
Ihsan, Sany Izan and Safian, M. A. I. M. and Taufek, M. A. M. and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Mahmoud Idres, Moumen Mohammed (2017) Trajectory tracking in quadrotor platform by using PD controller and LQR control approach. In: 6th International Conference on Mechatronics (ICOM'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.
Islam, Mazharul (2017) Effective class sessions with the BOPPPS model. In: 7th World Engineering Education Forum 2017, Kuala Lumpur. (Unpublished)
Islam, Mazharul and Langfeldt, Felix and Fürst, Jiri and Wood, David H. (2017) CFD analysis of a SD 7003 airfoil with a local correlation based transition and turbulence model. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Ismail, Muhammad Hafizuddin and Islam, Mazharul (2017) CFD analysis of low Reynolds number airfoils using SU2. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)
Jaafar, Abdul Hassan and Rahman, Mohammed Ataur and Mohiuddin, A K M and Rashid, Muhammad Mahbubur (2017) Modelling of an advanced charging system for electric vehicles. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.
Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Khan, Sher Afghan and Thakur, Mohammed Asadullah (2017) Estimation of stability derivatives in pitch for an oscillating wedge in hypersonic flow. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Labanieh, Mohamad Fateh and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Optimal location of piezoelectric patches for active vibration control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.
M Nasir, M Nazreen and Seman, M Adam and Mezeix, Laurent and Aminanda, Yulfian and Rivai, Ahmad and Ali, Karim Mansur (2017) Effect of stacking layup on spring-back deformation of symmetrical flat laminate composites manufactured through autoclave processing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25- 27 JULY 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.
Mangun, Firdause and Mahmoud Idres, Moumen Mohammed and Abdullah, Kassim Abdulrahman and UNSPECIFIED (2017) Design optimization of a hybrid electric vehicle powertrain. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.
Md Nor, Khairul Affendy and Mace, Brian R. and Hioka, Yusuke (2017) Adaptive control of radiated sound power based on time-domain estimates of acoustic radiation modes. In: 24th International Congress on Sound and Vibration, ICSV 2017 2017, 23rd-27th July 2017, London; United Kingdom.
Mizanur, Rahman and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Alam, A. H. M. Zahirul and Ihsan, Sany Izan and Mollik, M S (2017) Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Mohamed Ali, Suliman Mohamed and Faris, Waleed Fekry and Ismail, Ahmad Faris (2017) Numerical study of heat transfer of embossed plate fined heat sink. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.
Mohiuddin, A. K. M. and Abdul Jabar, Julia and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2017) Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.
Norsahperi, Nor Mohd Haziq and Ahmad, Salmiah and Fuad, A.F.M. and Mahmood, Iskandar Al Thani and Toha, Siti Fauziah and Akmeliawati, Rini and Darsivan, Fadly Jashi (2017) Modelling and control of base plate loading subsystem for the motorized adjustable vertical platform. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Okasha, Mohamed Elsayed Aly Abd Elaziz and Shah, J. and Fauzi, W and Hanouf, Zahir (2017) Gain scheduled linear quadratic control for quadcopter. In: AEROS Conference, 12th December 2017, Putrajaya, Malaysia.
Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P S (2017) CFD analysis of effect of Mach number, area ratio and nozzle pressure ratio on velocity for suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 Apr 2017, Pune, Maharashtra, India.
Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P S (2017) CFD analysis of effect of area ratio on suddenly expanded flows. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 Apr 2017, Pune, Maharashtra, India.
Pathan, Khizer Ahmed and Khan, Sher Afghan and Dabeer, P. S. (2017) CFD analysis of effect of flow and geometry parameters on thrust force created by flow from nozzle. In: 2017 2nd International Conference for Convergence in Technology (I2CT), 7-9 April 2017, Pune, Maharashtra, India.
Quadros, Jaimon Dennis and Khan, Sher Afghan and Antony, A J (2017) Investigation of effect of process parameters on suddenly expanded flows through an axi-symmetric nozzle for different Mach numbers using design of experiments. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Rahman, Mohammed Ataur and Abdi, Yusuf (2017) A novel electro conductive graphene/silicon-dioxide thermo-electric generator. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan (2017) Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Rahman, Mohammed Ataur and Rahman, Mizanur and Rashid, Muhammad Mahbubur (2017) Wireless battery management system of electric transport. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.
Ramli, M. Faiz and Legowo, Ari and Shamsudin, Syariful Syafiq (2017) Object detection technique for small unmanned aerial vehicle. In: 6th International Conference on Mechatronics (ICOM'17), 8th-9th August 2017, Kuala Lumpur.
Sahazubira, Muhammad Anas and Islam, Mazharul (2017) Analysis on vertical axis wind turbine using Qblabe. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)
Shaik Dawood, Mohd. Sultan Ibrahim and Ahmad Ghazilan, Ahmad Luqman and Shah, Qasim Hussain (2017) Finite element analysis of a composite crash box subjected to low velocity impact. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 3 April 2017, Kulliyyah of Engineering, International Islamic University Malaysia (IIUM)Kuala Lumpur; Malaysia.
Sulaeman, Erwin and Abdullah, Nur Azam and Kashif, Syed Muhammad (2017) Aeroelastic passive control optimization of supersonic composite wing with external stores. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Ali, Muhammad Atif and Mohd Baseair, Abdul Rahman (2017) Numerical investigation of aerodynamic characteristics of high speed train. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur, Malaysia.
Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and H. Noor, Azlina and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn curloaded poly(lactic acid) fibers. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016), 11th-14th December 2017, Chennai, India.
Syed Shaharuddin, Sharifah Imihezri and Qairol, A.A.B. and Hassan, Noor Azlina and Muhammad Khairusalleh, Nor Khairusshima (2017) Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017", 11 - 14 December 2017, Vellore Institute of TechnologyChennai; India.
Syed Shaharuddin, Sharifah Imihezri and Tengku Badring Shah, Tengku Nurul Ain and Muhamad Khairussaleh, Nor Khairusshima (2017) Thermal modelling and analysis of batik canting design. In: Advances in Materials and Processing Technologies Conference (AMPT 2017), 11th-14th Dec. 2017, Chennai, India.
Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2017) Morphing Wing I - finite element modelling of a NiTi SMA wire. In: 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017), 5 - 8 June 2017, Madrid, Spain.
Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
Za’aba, Khalid Aldin and Asrar, Waqar and Aldheeb, Mohammad (2017) Generation of atmospheric boundary layer in the IIUM low speed wind tunnel. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
Zuhdi, Amirul Hakim and Islam, Mazharul (2017) Performance analyses of horizontal axis wind turbines using QBlade. In: First Biannual Engineering Conference on Undergraduate Research (1st- BiECUR 2017), 17th Jan. 2017, Kuala Lumpur. (Unpublished)
Zyoud, Abdallah and Elfaki, Faiz A. M. and Hrairi, Meftah (2017) Parametric model based on imputations techniques for partly interval censored data. In: 4th International Conference on Mathematical Applications in Engineering 2017, ICMAE 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.
Patent
Rahman, Mohammed Ataur (2017) Graphene-Palladium catalysed exhaust gas reformer system. PI 2017704023.
Rahman, Mohammed Ataur (2017) Intelligent electromagnetic actuated continuously variable transmission System. PI-2017-700857.