IIUM Repository

Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Number of items: 95.

Article

Abdul Razak, Fadhilah and Rahman, Mohammed Ataur (2012) Dynamic modeling and simulation of waste energy harvesting system for urban car. Advanced Material Research, 576. pp. 679-682. ISSN 1662-8985

Abdullah, Kassim Abdulrahman and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian (2012) Experimental and numerical simulation of hollow structure under compression loading. Advanced Materials Research, 576. pp. 651-654. ISSN 1022-6680

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Husaini, Muhamad and Jameel, Ahmed Tariq (2012) Mixed-flow impeller characteristics in baffled mixing tank. Advanced Materials Research, 576. pp. 154-161. ISSN 1022-6680

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Mirghani, Mohamed Elwathig Saeed and Jameel, Ahmed Tariq (2012) Unconventional method for monitoring of waste cooking oil transesterification. Advanced Materials Research, 576. pp. 357-361. ISSN 1022-6680

Ahmed, Mirghani Ishak and Hrairi, Meftah (2012) Efficient cryogenic cooling during machining of rolled AISI 4340 steel. Advanced Materials Research, 576. pp. 123-126. ISSN 1022-6680

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Comparison of diesel emission experiments in view of the environment: a case study at Dubai. International Journal of Management Science and Engineering Management, 7 (1). pp. 36-42. ISSN 1750-9653

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Improvement of greenhouse by reducing gas emissions using replacement policy. International Journal of Energy Technology and Policy, 8 (3/4/5/). pp. 323-335. ISSN 1741-508X

Al Ali, Yousif and Hrairi, Meftah and Al Kattan, Ibrahim (2012) Potential for improving vehicle fuel efficiency and reducing the environmental pollution via fuel ionization. International Journal of Environmental Science and Technology , 9 (3). pp. 495-502. ISSN 1735-1472 (P), 1735-2630 (O)

Aldheeb, Mohammed and Kafafy, Raed and Idres, Moumen and Omar, Hanafy and Abido, Mohammad (2012) Design optimization of Micro Air Launch Vehicle using differential evolution. Journal of Aerospace Technology and Management, 4 (2). pp. 185-196. ISSN 1984-9648, 2175-9146

Ali Baig, Maughal Ahmed and Khan, Sher Afghan and C., Ahmed Saleel and Rathakrishnan, Ethirajan (2012) Control of base flows with micro jet for area ratio of 6.25. ARPN Journal of Engineering and Applied Sciences, 7 (8). pp. 992-1102. ISSN 1819-6608

Ali Baig, Maughal Ahmed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2012) Active control of base pressure in suddenly expanded flow for area ratio 4.84. International Journal of Engineering Science and Technology (IJEST), 4 (5). pp. 1885-1895. ISSN 2278-9510 E-ISSN 0975-5462

Amir, Ahmad N. and Shuriye, Abdi Omar and Ismail, Ahmad Faris (2012) Muhammad Abduh’s contributions to modernity. Asian Journal of Management Sciences & Education (AJMSE), 1 (1). pp. 63-75. ISSN 2186-845X (O), 2186-8441 (P)

Andan, Amelda Dianne and Asrar, Waqar and Omar, Ashraf Ali (2012) Investigation of aerodynamic parameters of a hybrid airship. Journal of Aircraft, 49 (2). pp. 658-661. ISSN 0021-8669

Bahar, Rubina and Hawlader, Mohammad Nurul Alam (2012) Study of falling film evaporation process in a vapor compression desalination system. Desalination and Water Treatment, 39 (1-3). pp. 21-32. ISSN 1944-3994 (O), 1944-3986 (P)

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Khan, Mohammad Yunus (2012) Effect of area ratio on base pressure in a suddenly expanded duct for under expanded flow ft mach 1.87. International Journal of Mechanical and Industrial Engineering, 2 (2). pp. 86-90. ISSN 2231-6477

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Control of nozzle flow in a suddenly expanded duct with micro jets. International Journal of Engineeing Science and Advance Technology (IJESAT), 2 (4). pp. 789-795. ISSN 2250-3676

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect of mach number in a suddenly expanded flow for area ratio 4.84. International Journal of Engineering Research and Application, 2 (4). pp. 593-599. ISSN 2248-9622

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Effect on base pressure in suddenly expanded flows with variable location of microjets. International Journal of Current Research and Review (IJCRR), 4 (16). pp. 1-8. ISSN 2231-2196 E-ISSN 0975-5241

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Experimental investigations on wall pressure in suddenly enlarged ducts at supersonic Mach number regimes. International Journal of Emerging Trends in Engineering and Development (IJETED), 6 (2). pp. 496-504. ISSN 2249-6149

Baig, Maugal Ahmed Ali and Khan, Sher Afghan and Rathakrishnan, E. (2012) Wall pressure studies in a suddenly expanded flow for area ratio 2.56”. International Journal of Engineering Research and Application, 2 (5). pp. 1566-1573. ISSN 2248-9622

Baig, Maughal Ahmed Al and Khan, Sher Afghan and Rathakrishnan, E. (2012) Base pressure studies from over expanded nozzle for area ratio 2.56. International Journal of Current Research and Review, 4 (11). pp. 107-112. ISSN 2231-2196 E-ISSN 0975-5241

Chowdhury, Md. Sazzad Hossien and Razali, Nur Isnida and Sellami , Ali and Rahman, M. M. (2012) A new application of multistage homotopy perturbation method to the chaotic Rössler system. AIP Conference Proceedings , 1482. pp. 507-511. ISSN 0094-243X (P), 1551-7616 (O)

Crasta, Asha and Baig, Maugal Ahmed Ali and Khan, Sher Afghan (2012) Estimation of stability derivatives of a delta wing in hypersonic flow. International Journal of Emerging trends in Engineering and Development (IJETED), 6 (2). pp. 505-516. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2012) Estimation of stability derivatives of an oscillating hypersonic delta wings with curved leading edges. International Journal of Mechanical Engineering & Technology, 3 (3). pp. 483-492. ISSN 0976-6359

Crasta, Asha and Khan, Sher Afghan (2012) High incidence supersonic similitude for planar wedge. International Journal of Engineering Research and Application, 2 (5). pp. 468-471. ISSN 2248-9622

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wing with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 1226-1233. ISSN 2250-3005

Crasta, Asha and Khan, Sher Afghan (2012) Oscillating supersonic delta wings with straight leading edges. International Journal of Computational Engineering Research,, 2 (5). pp. 12028-12035. ISSN 2250-3005

Das, Anindita and Justic, Dubravko and Inoue, Masamichi and Hoda, Asif and Huang, Haosheng and Park, Dongho (2012) Impacts of Mississippi River diversions on salinity gradients in a deltaic Louisiana estuary: Ecological and management implications. Estuarine, Coastal and Shelf Science, 111 (1). pp. 17-26. ISSN (p) 0272-7714 (o) 1096-0015

Echrif, Salah B. M. and Hrairi, Meftah (2012) Finite element investigation of some aspects affecting the depth and wall thickness of a part formed by single point incremental forming process. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 169-173. ISSN 1755-9766

Faris, Waleed Fekry (2012) "وسائل التربية فى رسائل النور "رؤية في توحيد المفاهيم. International Journal of Muslim Unity, 10 (1-2). pp. 47-83. ISSN 1675-7777

Faris, Waleed Fekry (2012) مقابلة مع الدكتور عبد العزيز التويجري: الأمين العام للمنظمة الإسلامية للتربية والعلوم والثقافة (الإيسيسكو. International Journal of Muslim Unity, 10 (1-2). pp. 83-95. ISSN 1675-7777

Faris, Waleed Fekry (2012) Contact-impact problems using a quasi-linear finite element appraoch. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 17-21. ISSN 1991-8178

Faris, Waleed Fekry and Asrar, Waqar and Omerbegovic, Adna (2012) Micropump modeling: current status and challenges. Australian Journal of Basic and Applied Sciences, 6 (1). pp. 134-142. ISSN 1991-8178

Faris, Waleed Fekry and Khalid, Asad A. and Albagul, Abdulgani and Ismail, Godem A. (2012) Investigation of the perfomance of a rotor-bearing systems containig composite and non-composite squeeze film dampers. Materials and Design, 34. pp. 340-345. ISSN 0261-3069

Hameed, Ammar and Kafafy, Raed and Idres, Moumen (2012) One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 163-168. ISSN 1755-9766

Hawlader, Mohammad Nurul Alam and Bahar, Rubina and Kim, Choon Ng and Loh , Jian Wei Stanley (2012) Transport analysis of an air gap membrane distillation (AGMD) process. Desalination and Water Treatment, 42 (1-3). pp. 333-346. ISSN 1944-3994 (O), 1944-3986 (P)

Hawlader, Mohammad Nurul Alam and Mohd. Amin, Zakaria (2012) Desalination of seawater using solar, ambient energy and waste heat from air conditioning system. Desalination and Water Treatment, 42 (1-3). pp. 235-240. ISSN 1944-3994 (O), 1944-3986 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Iqbal, A.K.M. Parvez and Ariffin, Muhidin and M., Mazian (2012) Drag analysis of an aircraft wing model and without bird feather like winglet. International Journal of Aerospace and Mechanical Engineering, 6 (1). pp. 8-13. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ramesh, Singh (2012) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), 19 (4). pp. 407-426. ISSN 1744-232X E-ISSN 1741-5152

Hrairi, Meftah and Ali, Arafath and Rizk, Abd El-Fattah (2012) Analysis of thermal stress intensity factors for edge cracked bimaterial system. Advanced Materials Research, 576. pp. 766-769. ISSN 1022-6680

Hrairi, Meftah and Elias, Mohd Azimin (2012) Detection of foreign bodies in canned foods using ultrasonic testing. International Food Research Journal, 19 (2). pp. 543-546. ISSN 19854668 (P), 22317546 (O)

Hrairi, Meftah and Mohammad, Masturah and Ismail, Siti Maisara (2012) Monitoring of fatigue damage using ultrasonics and finite element analysis. Advanced Materials Research, 576. pp. 655-658. ISSN 1022-6680

Islam, Mazharul and Carriveau, Rupp and Fartaj, Amir (2012) Performance analyses of a fixed-pitch straight-bladed VAWT with selected low Reynolds number airfoils. International Journal of Environmental Studies, 69 (2). pp. 289-298. ISSN 0020-7233 E-ISSN 1029-0400

Ismail L., ladipo and Abdul Muthalif, Asan Gani (2012) Active dynamic vibration absorber for broadband control of a multi-mode system: Simulation and experimental verification. Journal of Low Frequency Noise, Vibration and Active Control, 31 (3). pp. 159-173. ISSN 0263-0923

Jaafar, Israd Hakim and Shaik Dawood, Mohd. Sultan Ibrahim and Amin, A. K. M. Nurul and Shah, Qasim Hussain (2012) Modeling of a turning tool holder with finite elements and simulation of its free vibration frequencies. Advanced Materials Research, 576. pp. 659-664. ISSN 1022-6680

Mafeed, M. P. and M., Salman Ali and C., Prabin and Ramis, M. K. and Ali Baig, M. A. and Khan, Sher Afghan (2012) Optimum length for pin fins used in electronic cooling. Applied Mechanics and Materials, 110/16. pp. 1885-1895. ISSN 1660-9336

Mohamed Ali, Jaafar Syed and Sadeq, Tazkera (2012) Development of educational software for stress analysis of an aircraft wing. Journal of Engineering Science and Technology , 7 (3). pp. 322-338. ISSN 1823-4690

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2012) Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research, 445. pp. 899-904. ISSN 1662-8985

Omar, Norihan and Md Khalid, Nur Aisyah and Shamsudin, Nor Fadilah and Aminanda, Yulfian (2012) Prediction of energy absorption capability of curved panel structure; for wing leading edge study. Applied Mechanics and Materials, 225. pp. 178-182. ISSN 1660-9336

Omar, Nurihan and Syed Mohamad, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2012) Experimental study on jute-fiber-epoxy composite plate subjected to impact loading. Advanced Materials Research, 576. pp. 232-235. ISSN 1022-6680

Othman, Yahya Sheriff and Mahmood, Iskandar Al-Thani and Alang Md Rashid, Nahrul Khair and Ridhuan Siradj , Fadly Jashi Darsivan (2012) Artificial neural network based hysteresis compensation for piezoelectric tube scanner in atomic force microscopy. IEEE Region 10 Annual International Conference, Proceedings/TENCON. pp. 1-5. ISSN 2159-3442

Rahman, Md. Mustafizur and Hamada, Khalaf I and Abu Bakar, Rosli and Maleque, Md. Abdul (2012) Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine. Advanced Science Letters, 14 (1). 239-243(5). ISSN 1936-6612

Rahman, Mohammed Ataur and Hossain, Altab and Alam, A. H. M. Zahirul and Rashid, Muhammad Mahbubur (2012) Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics, 49 (1). pp. 13-25. ISSN 0022-4898

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Hossain, Altab and Alam, A. H. M. Zahirul (2012) Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology, 26 (7). pp. 1-9. ISSN 1738-494X E-ISSN 1976-3824

Ridhuan Siradj , Fadly Jashi Darsivan and Faris, Waleed Fekry (2012) Vibration investigation of a quarter car with nonlinear shock absorber model. Advanced Materials Research, 576. pp. 665-668. ISSN 1022-6680

Saharin, Sanisah and Lefort, Benoite and Morin, Celine and Chauveau, Christian and Le Moyne, Luis and Kafafy, Raed (2012) Vaporization characteristics of ethanol and 1-propanol droplets at high temperatures. Atomization and Sprays, 22 (3). pp. 207-226. ISSN 1044-5110

Shah, Qasim Hussain and Naily, Hanis and Ramly, Nur Syuhada (2012) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 174-180. ISSN 1755-9766

Sulaeman, Erwin (2012) On the evaluation of negative altitude requirement for flutter speed boundary of transport aircraft and UAV. Applied Mechanics and Materials, 225. pp. 397-402. ISSN 1660-9336

Syed Muhammad, Kashif (2012) Delamination effect modeling, simulation and experimental validation of lap shear test. International Journal of Mechanical and Materials Engineering (IJMME), 7 (3). pp. 177-185. ISSN 1823-0334

Tuan Kamaruddin, Tengku Nordayana Akma and Mat Darus, Intan Z (2012) Neuro-fuzzy identification of an internal combustion engine. International Journal of Simulation Systems, 13 (3B). pp. 30-37. ISSN 1473-804X E-ISSN 1473-8031

syed Abu Bakar, Syed Noh and Abdalla, Mostafa M. and Faris, Waleed Fekry and Ihsan, Sany Izan (2012) Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate. International Journal of Vehicle Noise and Vibration, 8 (4). pp. 302-317. ISSN 1479-148X (O), 1479-1471 (P)

Book

Abdelrahman, Mohammad and Hassan, Sayed (2012) Spacecraft attitude control: development and application of new algorithms. LAMBERT Academic Publishing, Germany. ISBN 978-3848400867

Abdelrahman, Mohammad and Hassanein, Atef (2012) New low speed airfoil families oriented towards horizontal-axis wind turbines applications. LAMBERT Academic Publishing, Germany. ISBN 978-3848438808

Hussain Shah, Qasim and Hasan, Hasan Abid (2012) LS-DYNA for beginners: an insight into Ls-Prepost and Ls-Dyna. LAP LAMBERT Academic Publishing, Saarbrucken Germany. ISBN 9783846556771 / 3846556777

Rahman, Mohammed Ataur and Rafia, Afroz and Yahya, Azmi (2012) The peat swamp:Productivity, traficability and mechanization. Environmental Science, Engineering and Technology . Nova Science Publishers Inc., New York, USA. ISBN 978-1-61942-670-2 (In Press)

Book Chapter

Aminanda, Yulfian (2012) Impact study on aircraft type laminate composite plate: experimental, failure criteria and element model review. In: Damage and fracture of composite sand structure. Advanced structure materials, 17 (17). Springer - Verlag, Berlin Germany, pp. 157-186. ISBN 9783642236587

Castanie, Bruno and Aminanda, Yulfian and Barrau, Jean-Jacques and Thevenet, Pascal (2012) Discrete modeling of the crushing of nomex honeycomb core and application to impact and post-impact behavior of sandwich structures. In: Dynamic failure of composite and sandwich structures. Solid Mechanics and Its Applications, 192 (192). Springer Science+Business Media Dordrecht, Dordrecht Germany, pp. 427-489. ISBN 9789400753297 (O), 9789400753280 (P)

Proceeding Paper

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and A. Aziz, A. Rashid and Anbese, Yohannes Tamirat and F., Firmansyah and Husaini, Muhamad (2012) CFD simulation of biodiesel production using mixed flow impeller in baffled and unbaffled stirred vessel. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012), 3 - 5 July 2012, Kuala Lumpur, Malaysia.

Asrar, Waqar and Aymeric , Goulet and Tristan, Mazou Berges (2012) Passive drag reduction for green design. In: International Conference on Dessign and Concurrent Engineering, 2012, 15-16 October 2012, Melaka.

Bin Zulkafli, Mohd Fadhli and Omar, Ashraf Ali E. and Asrar, Waqar (2012) Numerical analysis of FDV method for one-dimensional Euler equations. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE2012), 3 - 5 July 2012, Seri Pacific Hotel Kuala Lumpur, Malaysia.

Castanie, Bruno and Aminanda, Yulfian and Schwob, Cyrille (2012) Modelling of impact on sandwich structure for fast maintenance loops. In: ICAS 2012 ( International Conference on Aerospace Science 2012, 23 - 28 September 2012, Brisbane Australia. (In Press)

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz and Rahman, Md. Ataur (2012) Design of 0.13um CMOS multi-valued analog to digital converter. In: International Conference on Computer and Communication Engineering (ICCCE 2012), 3-5 July 2012, Seri Pacific Hotel Kuala Lumpur.

Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan and Joseph, Deepu and Hamid, N Munira and Wasil, Wira E A (2012) An integrated solar thermal and photovoltaic system. In: European Workshop on Renewable Energy Systems 2012, 17-19 September 2012, Analya, Antalya, Turkey. (Unpublished)

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2012) Design and simulation of a thermoelectric cooling system for motorcyclist helmet. In: 2nd International Conference on Mathematical Applications in Engineering (ICMAE’2012), 3-5 July 2012, Kuala Lumpur, Malaysia.

Ihsan, Sany Izan and Hawlader, Mohammad Nurul Alam and Yunus, Firdaus and Mudzrin , M Irfan I (2012) An air conditioning system providing cooling, water heating and drying. In: European Workshop on Renewable Energy Systems 2012, 17-19 September 2012, Analya, Antalya, Turkey. (Unpublished)

Ismaila B., Tijani and Akmeliawati, Rini and Legowo, Ari and Tun Muzamil, L. A. (2012) A matlab-based low-cost autopilot for autonomous helicopter development. In: ICIUS 2012, 21 October 2012, Singapore. (Unpublished)

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. and Jameel, Ahmed Tariq (2012) Numerical modelling of mixed flow impeller in stirred vessel. In: ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, 9-15 November 2012, Houston, Texas, USA.

Mokhtar, Hanan and Sicot , Olivier and Rosseau, Jerome and Aminanda, Yulfian and Aivazaddeh, Shahram (2012) Comparison of single and double impact damage on carbon/epoxy laminates subjected to hygrothermal ageing. In: ECCM 15, 24-28 June 2012, Venice Italy. (In Press)

Mokhtar , Hanan and Sicot, Olivier and Rousseau, Jerome and Aminanda, Yulfian and Aivazzadeh, Shahram (2012) The effect of double impact on hygrothermally aged carbon epoxy laminates. In: Diracoys 2012, 17 - 19 September 2012, Brussel Belgium. (Unpublished)

Omar, Ashraf Ali and Abdullah, Nur Azam and Simat @ Mohd Akhir, Ahmad Zaahin (2012) Development of IIUM circular planform unmanned aerial vehicle (IIUM-CPUAV). In: 3rd International Conference on Engineering & ICT (ICEI2012), 4-6 April 2012, Melaka, Malaysia. (Unpublished)

Omar, Ashraf Ali E. and Jamaluddin, Hani Ludin and Asrar, Waqar (2012) Numerical investigation of the vortical flow over delta wing and reverse delta wing. In: 6th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2012), 1-4 July 2012, Istanbul, Turkey. (Unpublished)

Monograph

Abdelrahman, Mohammad (2012) Development of a three dimensional visualization tool for spacecraft attitude and orbital dynamics using telemetry data. Research Report. s.n. (Unpublished)

Abdullah, Kassim Abdulrahman (2012) Design and fabrication of the second generation IIUM buggy car. Research Report. s.n, Kuala Lumpur. (Unpublished)

Asrar, Waqar (2012) Stability of hybrid airships. Research Report. s.n, Kuala Lumpur. (Unpublished)

Hrairi, Meftah (2012) Design and development of an automated magnetic particle testing of automotive parts. Research Report. [s.n]. (Unpublished)

Kafafy, Raed Ismail (2012) Investigation of heat transfer effect on polymerase chain reaction. Project Report. s.n. (Unpublished)

Kashif, Syed Muhammad (2012) Hot Water Rocket System (HWRS) - preliminary design and prototype development of a pressurized how water casing (PHWC). Research Report. s.n, Kuala Lumpur. (Unpublished)

Legowo, Ari (2012) Hybrid DE and PEM algorithm for identification of small scale Autonomous helicopter model. Research Report. s.n, Kuala Lumpur. (Unpublished)

Mohiuddin, A. K. M. (2012) The hybrid car with waste gas recovery. Research Report. s.n, Kuala Lumpur. (Unpublished)

Omar, Ashraf Ali and Asrar, Waqar (2012) Numerical investigation of the effect of spoilers configuration on wake vortex. Research Report. [s.n]. (Unpublished)

Omar, Ashraf Ali E. (2012) IIUM Geobat flying saucer: design, fabrication and testing. Research Report. s.n., Kuala Lumpur. (Unpublished)

Omar, Ashraf Ali E. and Asrar, Waqar and Ludin @Jamaluddin, Hani (2012) Numerical investigation of the effect of spoiler’s configuration on wake vortex. Research Report. UNSPECIFIED. (Unpublished)

Shah, Qasim Hussain (2012) Effect of steel, cooper, and lead projectile impact on the damage process of brittle materials. Research Report. s.n, Kuala Lumpur. (Unpublished)

Waleed Fekry, Faris (2012) Vibro-Acoustic Analysis of Automotive Vehicles. Research Report. s.n. (Unpublished)

Patent

Omar, Hanafy and Idres, Moumen and Kafafy, Raed (2012) Particle Swarm-Based Micro Air Launch Vehicle Trajectory Optimization Method. http://www.google.com/patents/US8332085.

This list was generated on Fri Mar 29 15:37:55 2024 +08.