Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2009

Article

A. Rizk, Abd El-Fattah and Hrairi, Meftah (2009) Edge-cracked bimaterial systems under thermal heating. International Journal of Solids and Structures, 46 (7-8). pp. 1648-1658. ISSN 0020-7683

Ahmed, Mirghani Ishak and Hrairi, Meftah and Ismail, Ahmad Faris (2009) On the characteristics of multistage evacuated solar distillation. Renewable Energy, 34. pp. 1471-1478. ISSN 0960-1481

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2009) Experimental and numerical study of compression after impact of sandwich structures with metallic skins. Composites Science and Technology, 69 (1). pp. 50-59. ISSN 0266-3538

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2009) Experimental and numerical study of compression after impact of sandwichs structures with metallic skins. Composites Science and Technology, 69 (1). pp. 50-59. ISSN 0266-3538

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali (2009) Comparison of high-order accurate schemes for solving the nonlinear viscous burgers equation. Australian Journal of Basic and Applied Sciences, 3 (3). pp. 2535-2543. ISSN 1991-8178

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf A. and Kwon, Kijung and Jung, Hyejin (2009) Experimental investigation of plain- and flapped-wing tip vortices. Journal of Aircraft, 46 (1). pp. 254-262. ISSN 0021-8669

Faris, Waleed Fekry and Ata, A.A and Sa'Adeh, M.Y (2009) Energy minimization approach for a two-link flexible manipulator. Journal of Vibration and Control, 15 (4). pp. 497-526. ISSN 1077-5463

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-1471 E-ISSN 1479-148X

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Analysis of semi-active suspension systems for four-axles off-road vehicle using half-model. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 91-115. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and El Hawari, Yaser and Ihsan, Sany Izan (2009) Technology transfer: challenges and prospective Arab world as a case study. International Journal of Arab Culture, Management and Sustainable Development, 1 (2). pp. 195-207. ISSN 1753-9420 (O), 1753-9412 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) Transient and steady state dynamic analysis of passive and semi-active suspension systems using half-car model. International Journal of Modelling, Identification and Control, 6 (1). pp. 62-71. ISSN 1746-6180 (O), 1746-6172 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-148X (O), 1479-1471 (P)

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2009) A comparative ride performance and dynamic analysis of passive and semi-active suspension systems based on different vehicle models. International Journal of Vehicle Noise and Vibration, 5 (1/2). pp. 116-140. ISSN 1479-1471 E-ISSN 1479-148X

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Haque, Md. Mohafizul and Khan, Ahsan Ali and Ismail, Ahmad Faris (2009) Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B, 23 (6-7). pp. 826-831. ISSN 0217-9792 E-ISSN 1793-6578

Hossain, Altab and Rahman, Mohammed Ataur and Rahman, Md. Mozasser and Hasan, SK. and Hossen, Md. Jakir (2009) Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering, 3 (2). pp. 43-51. ISSN 1982-3932

Hrairi, Meftah (2009) Statistical Signal Processing and Sorting for Acoustic Emission Monitoring of High-Temperature Pressure Components. Experimental Techniques, 33 (5). pp. 35-43. ISSN 1747-1567

Hrairi, Meftah (2009) Using acoustic emission and fractography to evaluate defects induced by corrosive environment. Corrosion Engineering, Science and Technology, 44 (4). pp. 251-260. ISSN 1743-2782 (O), 1478-422X (P)

Hrairi, Meftah and Ahmed, Mirghani Ishak and Nimir, Yassin (2009) Compaction of fly ash–aluminum alloy composites and evaluation of their mechanical and acoustic properties. Advanced Powder Technology, 20 (6). pp. 548-553. ISSN 0921-8831

Hussain Shah, Qasim (2009) Impact resistance of a rectangular polycarbonate armor plate subjected to single and multiple impacts. International Journal of Impact Engineering, 36. pp. 1128-1135. ISSN 0734-743X

Ihsan, Sany Izan and Ahmadian, Mehdi and Faris, Waleed Fekry and Blancard, E. D. (2009) Ride performance analysis of half-car model for semi-active system using RMS as performance criteria. Shock and Vibration, 16. pp. 593-605. ISSN 1070-9622

Loh, S.K. and Chin, W. M. and Faris, Waleed Fekry (2009) Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading. Materials and Design, 30. pp. 3206-3216. ISSN 0261-3069

Mahbub, Fazle and Hawlader, Mohammad Nurul Alam and Mujumdar, A. S. (2009) Combined water and power plant (CWPP) — a novel desalination technology. Desalination and Water Treatment, 5. pp. 172-177. ISSN 1944-3994 (O), 1944-3986 (P)

Omar, Ashraf Ali E. and Ong, Jiunn Chit and Asrar, Waqar and Ismail, Ahmad Faris (2009) Accuracy of Bhatnagaar-Gross-Krook scheme in solving laminar viscous flow problems. AIAA Journal, 47 (4). pp. 885-892. ISSN 0001-1452

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4). pp. 231-241. ISSN 1755-9766

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2009) Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 16 (1/2). pp. 225-242. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2009) Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal, 3. pp. 15-28. ISSN 1874-4478

Syed Muhammad, Kashif and Toussaint, Evelyne and Grédiac, Michel (2009) Optimization of a mechanical test on composite plates with the virtual fields method. Structural and Multidisciplinary Optimization, 38 (1). pp. 71-82. ISSN 1615-1488 (O), 1615-147X (P)

Book

Omar Shuriye, Abdi and Ismail, Ahmad Faris and Dahalan@Ghazali, Azweeda, eds. (2009) Ethics of engineering education. IIUM Press, Kuala Lumpur. ISBN 9789833855674

Faris, Waleed Fekry and Mohyuddin, Muhammad Raheel and Ismail, Ahmad Faris (2009) Fundamentals of fluid mechanics. IIUM Press, Kuala Lumpur. ISBN 9789833855889

Book Chapter

Hrairi, Meftah and Khalifa, Othman Omran (2009) An Integrated approach of ethics and professional issues into engeneering curriculum. In: Ethics of engineering education. IIUM Press, Kuala Lumpur, pp. 275-281. ISBN 9789833855674

Proceeding Paper

Chowdhury, Md. Sazzad Hossien and Hashim, Ishak and Ismail, Ahmad Faris (2009) Solving linear system of partial differential equations by homotopy-pertubation method. In: 4th International Conference on Research and Education in Mathematics, 21-23 October 2009, Renaissance Hotel, Kuala Lumpur.

Elfaghi, Abdulhafid M. and Asrar, Waqar and Omar, Ashraf Ali E. (2009) Accurate compact flowfield-dependent variation method for compressible Euler equations. In: International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009), 11 - 13 October 2009, Penang, Malaysia.

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali (2009) Evaluation of aircraft wing-tip vortex using PIV. In: The 10th Asian International Conference on Fluid Machinery (AICFM), 21-23 October 2009, Kuala Lumpur, Malaysia. (Unpublished)

Elsayed, Omer Ali and Asrar, Waqar and Omar, Ashraf Ali and Kwon, Kijung and Jung, Hyejin (2009) Experimental investigation of wing tip vortex. In: 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition 2009, 5-8 January 2009, Orlando, Florida.

Faris, Waleed Fekry and BenLahcene, Zohir and Ihsan, Sany Izan (2009) Ride comfort assessment in off road vehicles using passive and semi-active suspension. In: Asia pacific Conference on Defence & Security Technology (DSTC 2009), 6-7 October 2009, Hotel Istana, Kuala Lumpur. (Unpublished)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladeh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, Parvez and Muhidin, Arifin and Mohamad, Mazian (2009) Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hrairi, Meftah and Rizal, Mohd Shah (2009) Development of a system for automatic magnetic particle inspection of automotive components. In: Proceedings of 2nd CUTSE International Conference 2009 CUTSE'09, November, Miri, Malaysia. (Unpublished)

Iannucci, L and Shaik Dawood, Mohd. Sultan Ibrahim and Greenhalgh, E and Ariffin, A. K. (2009) Delamination control in composite beams using piezoelectric actuators. In: 17th International Conference on Composite Materials, Edinburgh UK.

Islam, Mazharul and Amin, M. Ruhul and Shariff, Yasir M. (2009) Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions. In: ASME 2009 International Mechanical Engineering Congress and Exposition, IMECE2009, 13 -19 November 2009, Lake Buena Vista, FL; United States.

Islam, Mazharul and Amin, Mohammad Ruhul and Carriveau, Rupp and Fartaj, Amir (2009) Investigation of low reynolds number airfoils for fixed-pitch straight-bladed VAWT. In: 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 5-8 January 2009, Orlando, Florida, U.S.A..

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009, 4-5 May, 2009, Kuala Lumpur, Malaysia.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2009) Switching algorithm to avoid attitude representation singularity. In: AIAA Atmospheric Flight Mechanics Conference, 10-13 August 2009, Chicago, Illinois.

Olalekan, Salawudeen Taofeeq and Muyibi, Suleyman Aremu and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Shah, Qasim Hussain and Qudseih, Isam Y. (2009) Surface characteristics of nanoclay modified with different alkylamonium ions. In: International Journal of Arts & Sciences Conference, 1-4th June 2009, Las Vegas.

Omar, Ashraf Ali and Cheong, Zi Jian (2009) Development of International Islamic University Malaysia-Micro Aerial Vehicle (IIUM-MAV). In: 2nd CUTSE International Conference, 24-25 Nov 2009, Miri, Sarawak.

Ong, Jiunn Chit and Omar, Ashraf Ali E. and Asrar, Waqar (2009) Reynolds averaged navier-stokes flow computation of RAE2822 airfoil using gas-kinetic BGK Scheme. In: International MultiConference of Engineers and Computer Scientists (IMECS), 18 - 20 March 2009, Hong Kong.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.