Browse by Email

Article

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Bello, Kamilu Adeyemi (2024) Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 108-117. ISSN 2289-7895

S.Y., Cetin and Md. Abdul, Maleque and Hassan, Masjuki and A., Hamdan (2022) Wear simulation of automotive engine component materials under biodiesel. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9167 - 9174. ISSN 2289-4659 E-ISSN 2231-8380

Maleque, Md. Abdul and Cetin, Safa Y. and Hassan, Masjuki and Sulaiman, Mohd Hafiz and Rosli, Adib Hamdani (2022) A systematic review on corrosive-wear of automotive components materials. Jurnal Tribologi, 35. pp. 33-49. E-ISSN 2289-7232

Ahmad, Farah and Kalam, M.A. and Zhang, Zhanying and Masjuki, Haji Hassan (2022) Sustainable production of furan-based oxygenated fuel additives from pentose-rich biomass residues. Energy Conversion and Management: X, 14 (100222). ISSN 2590-1745 (In Press)

Aamir, Shahzad and Arslan, Ahmed and Moinuddin, Mohammed Quazi and Muhammad, Jamshaid and Ashrafur Rahman, S.M and Masjuki, Hassan and Hafiz Muhammad Asif, Javed (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (1440). pp. 1-36. ISSN 1996-1073

Zahid, Rehan and Bhutta, Muhammad Usman and Mufti, Riaz Ahmad and Abdullah, Muhammad Usman and Masjuki, Haji Hassan and Varman, Mahendra and Kalam, Muhammad Abul and Ali, Mian Ashfaq and Aslam, Jawad and Akhtar, Khalid (2021) Friction and Wear Performance Evaluation of Bio-Lubricants and DLC Coatings on Cam/Tappet Interface of Internal Combustion Engines. Materials, 14 (23). pp. 1-23. ISSN 1996-1944

Memon, Mujtaba S and Haeng, Muk Cho and Masjuki, Haji Hassan and M.A, Kalam and Miiro, Farooq and M. Soudagar, Manzoore Elahi and Muhammad, Gul and Ahmed, Waqar and Afzal, Asif and Bashir, Shahid and V., Dhana Raju and Yaqoob, Haseeb and A.Z, Syahir (2021) Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blends. Energy Reports, 7. pp. 1162-1171. ISSN 2352-4847

Muhammad, Gul and Mohd Zulkifli, Nurin Wahidah and Md. Abul, Kalam and H.H., Masjuki and Abbas, Muhammad Mujtaba and Yousuf, Sumra and Bashir, M. Nasir and Ahmed, Waqar and M.N.A.M., Yusoff and Noor, Shazia and Ahmad, Rauf and Hassan, M. Tahir (2021) RSM and artificial neural networking based production optimization of sustainable cotton bio-lubricant and evaluation of its lubricity & tribological properties. Energy Reports, 7. pp. 830-839. ISSN 2352-4847

Fazal, M. A. and Sundus, F. and Masjuki, Haji Hassan and Rubaiee, Saeed and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1-8. ISSN 2213-1388

Kumar, L. Harish and Kazi, S. N. and Masjuki, H. H. and Zubir, M. N. M. (2021) A review of recent advances in green nanofluids and their application in thermal systems. Chemical Engineering Journal, 429. pp. 1-18. ISSN 1385-8947

Jamshaid, Muhammad and Masjuki, Haji Hassan and Kalam, Md Abul and Zulkifli, Nurin Wahidah Mohd and Arslan, Ahmed and Qureshi, Akbar Ali (2021) Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels. Energy, 239. pp. 1-15. ISSN 0360-5442 E-ISSN 1873-6785

Abbas, Muhammad Mujtaba and Kalam, Md Abul and Masjuki, Haji Hassan and Razzaq, Luqman and Khan, Haris Mehmood and Soudagar, Manzoore Elahi M. and Gul, M. and Ahmed, Waqar Ahmed and V., Dhana Raju and Kumar, Ravinder and Ong, Hwai Chyuan (2021) Development of empirical correlations for density and viscosity estimation of ternary biodiesel blends. Renewable Energy, 179. pp. 1447-1457. ISSN 0960-1481

Mazaheri, Hoora and Ong, Hwai Chyuan and Amini, Zeynab and Masjuki, H. H. and Mofijur, M. and Su, Chia Hung and Badruddin, Irfan Anjum and Yunus Khan, T.M. (2021) An overview of biodiesel production via calcium oxide based catalysts: current state and perspective. Energies, 14 (13). pp. 1-23. ISSN 1996-1073

Kumar, Laveet Harish and Kazi, Salim Newaz and Masjuki, Haji Hassan and Zubir, Mohd Nashrul and Jahan, Afrin and Bhinitha, C. (2021) Energy, exergy and economic analysis of liquid flat-plate solar collector using green covalent functionalized graphene nanoplatelets. Applied Thermal Engineering, 192 (Special Issue (SI)). pp. 1-19. ISSN 1359-4311 E-ISSN 1873-5606

Hasnul, Muhammad Harith and Mohd Zulkifli, Nurin Wahidah and Masjuki, H. H. and Zulkifli, Syahir Amzar and Mohd Yusoff, Mohd Nur Ashraf and Zakaria, Muhammad Zulfattah (2021) Synergistic behavior of graphene and ionic liquid as bio-based lubricant additive. Lubricants, 9 (5). pp. 1-15. ISSN 2075-4442

L., Harish Kumar and Kazi, Salim Newaz and Masjuki, Haji Hassan and Mohd Zubir, Mohd Nashrul and Jahan, Afrin and Oon, Cheen Sean (2021) Experimental study on the effect of bio‑functionalized graphene nanoplatelets on the thermal performance of liquid flat plate solar collector. Journal of Thermal Analysis and Calorimetry. pp. 1-18. ISSN 1388-6150 E-ISSN 1588-2926

Mujtaba, M. A. and Kalam, Mohammad Abul and Masjuki, Haji Hassan and Soudagar, Manzoore Elahi M. and Khan, Haris Mehmood and Fayaz, Hussain and Farooq, Muhammad and Gul, Mustabshirha and Ahmed, Waqar and Ahmad, Mushatq and Munir, Mamoona and Yaqoob, Haseeb and Samuel, Olusegun David and Razzaq, Luqman (2021) Effect of palm-sesame biodiesel fuels with alcoholic and nanoparticle additives on tribological characteristics of lubricating oil by four ball tribo-tester. Alexandria Engineering Journal, 60 (5). pp. 4537-4546. ISSN 1110-0168 E-ISSN 2090-2670

Abbas, Muhammad Mujtaba and Kalam, Mohammad Abul and Hassan, Masjuki and Gul, M. and M. Soudagar, Manzoor Elahi and Ong, Hwai Chyuan and Ahmed, Waqar and Atabani, Abdulaziz and Razzaq, Luqman and Yusoff, Mohammad N.A.M. (2020) Comparative study of nanoparticles and alcoholic fuel additives-biodiesel-diesel blend for performance and emission improvements. Fuel, 279. pp. 1-11. ISSN 0016-2361

Mujtaba, Muhammad Abbas and Muk Cho, Haeng and Hassan, Masjuki and Abul Kalam, Mohammad and Ong, Hwai Chyuan and Gul, Mustabshirha and Harith, M. H. and Yusoff, Mohd Hizami (2020) Critical review on sesame seed oil and its methyl ester on cold flow and oxidation stability. Energy Reports, 6. pp. 40-54. ISSN 2352-4847

Gul, M. and Mohd Zulkifli, Nurin Wahidah and Masjuki, Haji Hassan and Abul Kalam, Mohammad and Mujtaba, M. A. and Harith, M. H. and Syahir, A. Z. and Ahmed, Waqar and Farooq, Abdul Bari (2020) Effect of TMP-based-cottonseed oil-biolubricant blends on tribological behavior of cylinder liner-piston ring combinations. Fuel, 278. ISSN 0016-2361 E-ISSN 1873-7153

Mujtaba, M. A. and Masjuki, Haji Hassan and Kalam, Mohammad Abul and Ong, Hwai Chyuan and Gul, M. and Farooq, Muhammad and Soudagar, Manzoore Elahi M and Ahmed, Waqar and Harith, M. H. and Yusoff, Mohammad N.A.M. (2020) Ultrasound-assisted process optimization and tribological characteristics of biodiesel from palm-sesame oil via response surface methodology and extreme learning machine - Cuckoo search. Renewable Energy, 158. pp. 202-214. ISSN 0960-1481

Cheah, Mei Yee and Ong, Hwai Chyuan and Mohd Zulkifli, Nurin Wahidah and Masjuki, Haji Hassan and Salleh, Aishah (2020) Physicochemical and tribological properties of microalgae oil as biolubricant for hydrogen-powered engine. International Journal of Hydrogen Energy, 45 (42). pp. 22364-22381. ISSN 0360-3199

Mohd Yusoff, Mohd Nur Ashraf and Mohd Zulkifli, Nurin Wahidah and Sukiman, Nazatul Liana and Ong, Hwai Chyuan and Masjuki, Haji Hassan and Hasnul, Muhammad Harith and Zulkifli, Muhammad Syahir Amzar and Abbas, Muhammad Mujtaba and Zakaria, Muhammad Zulfattah (2020) Sustainability of palm biodiesel in transportation: a review on biofuel standard, policy and international collaboration between Malaysia and Colombia. Bioenergy Research. pp. 1-18. ISSN 1939-1234 E-ISSN 1939-1242

Mujtaba, Muhammad Abbas and Masjuki, Haji Hassan and Kalam, Md. Abul and Noor, Fahad and Farooq, Muhammad and Hwai, Chyuan Ong and Gul, Mustabshirha and Soudagar, Manzoore Elahi M. and Bashir, Shahid and Md Rizwanul Fattah, Islam and Razzaq, Luqman (2020) Effect of additivized biodiesel blends on diesel engine performance, emission, tribological characteristics, and lubricant tribology. MDPI, 13 (13). pp. 1-15. E-ISSN 1996-1073

Tan, M. Y. and Liza, Shahira and Khadijah, S. M.P. and Abbas, Azlina Amir Mir and Merican, Azhar Mahmood and Ayob, K. A. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan (2020) Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109. ISSN 1350-6307

Arslan, Ahmed and Hassan, Masjuki and M. M., Quazi and Abul Kalam, Mohammad and Varman, Mahendora and Chattha, Jamshaid Anwar and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Imran, Muhammad and Zakaria, Muhammad Zulfattah and Anwar, Muhammad Tuoqeer and Gohar, Ghulam Abbas and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-9. E-ISSN 2053-1591 (In Press)

Syahir, A. Z. and Mohd Zulkifli, Nurin Wahidah and Hassan, Masjuki and Abul Kalam, Mohammad and Harith, M. H. and Yusoff, M. N.A.M. and Zulfattah, Z. M. and Jamshaid, Muhammad (2019) Tribological improvement using ionic liquids as additives in synthetic and bio-based lubricants for steel-steel contacts. Tribology Transactions, 63 (2). pp. 235-250. ISSN 1040-2004 E-ISSN 1547-397X

Gul, Mustabshirha and Hassan, Masjuki and Abul kalam, Mohammad and Zulkifli, Nurin Wahidah and Mujtaba, M. A. (2019) A review: role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. Bioenergy Research, 13 (1). pp. 1-22. ISSN 1939-1234 E-ISSN 1939-1242 (In Press)

Book Chapter

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Proceeding Paper

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Amir, Adibah and Ahmad, Zuraida and Toha @ Tohara, Siti Fauziah and Hasbullah, Nurul Fadzlin and Mel, Maizirwan and Haji Hassan, Masjuki and Ismail, Md Yusof (2023) Enhancing engineering ethics understanding: impact of the teaching and learning approaches and curriculum. In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Masjuki, H. H. and Low, K. O. and Ali, Mohammad Yeakub (2023) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Maleque, Md. Abdul and Sarifuddin, Norshahida and Haji Hassan, Masjuki and Rahman, M. M. (2022) Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022), 16-19 February 2022, Lahore, Pakistan.

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)