Items where Author is "Nor Hairin, Assayidatul Laila"

Nor Hairin, Assayidatul Laila and Jailani, Muhammad Haziq Hakmal and Megat Hasnan, Megat Muhammad Ikhsan (2023) Thermoelectric properties of B-FeSi2 thermoelectric module utilizing cast-iron scrap chips. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Nor Hairin, Assayidatul Laila and Mohd Yusaini, Nurul Batrisyia and Othman, Raihan and Mohd Salled, Mohd Faiz (2023) Synthesis and characterization of intrinsic CuO-ZnO semiconductor for thermoelectric cell using electrodeposition method. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Muhammad Nur Aidid Ong, Siti Erina and Yang, Chuan Choong and Nor Hairin, Assayidatul Laila (2022) Recycling of waste heat produced from air-conditioning outdoor unit via thermoelectric generator for non-intrusive and clean energy harvesting. In: Global Cleanup Congress Kuala Lumpur 2022, IIUM Cultural Centre Kuala Lumpur. (Unpublished)

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2020) Preparation of eco-friendly Fe2VAl-based thermoelectric materials using cast iron scrap chips as a source material. Materials Transactions, 61 (11). pp. 2216-2221. ISSN 1345-9678

Nor Hairin, Assayidatul Laila and Idris, Mohd Fitri and Othman, Raihan and Mohd Daud, Farah Diana and Rozhan, Alya Naili and Mohd Zaki, Hafizah Hanim (2019) Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques, 18th-19th August 2018, Kota Bharu Kelantan.

Nor Hairin, Assayidatul Laila (2019) Preparation of ZNSB thermoelectric materials using electrodeposition method. Research Report. UNSPECIFIED, IIUM. (Unpublished)

Mohamad Sholihin, Mohamad Hanis and Mohd Zaki, Hafizah Hanim and Sarifuddin, Norshahida and Nor Hairin, Assayidatul Laila (2019) Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018, 18th-19th August, 2018, Grand Riverview Hotel, Kota Bharu.

Kahlib, N. A.Z. and Mohd Daud, Farah Diana and Mel, Maizirwan and Nor Hairin, Assayidatul Laila and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina (2018) Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Nor Hairin, Assayidatul Laila and Romainor, M. N. and Othman, Raihan and Mohd Daud, Farah Diana (2018) Electrodeposition of zinc antimony alloy thermoelectric materials. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohd Daud, Farah Diana and Kahlib, Nor Amyra Zulianey and Mohd Rafi, Muhammad Husaini and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Effect of calcination temperature on the silica ceramic membrane synthesized via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, Special issue. pp. 63-67. ISSN 2581-4311

Kahlib, Nor Amyra Zulianey and Wan Mazlan, Wan Amirah and Mohd Daud, Farah Diana and Mel, Maizirwan and Ahmad Azhar, Ahmad Zahirani and Hassan, Noor Azlina and Nor Hairin, Assayidatul Laila (2018) Influence of water molar ratio on fabrication of silica ceramic membranes via sol-gel dip-coating method. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 378-383. ISSN 2581-4311

Nor Hairin, Assayidatul Laila and Othman, Raihan and Rizal, Faireez and Mohd Daud, Farah Diana (2017) Physiochemical characterization of Sn-Zn coatings electrodeposited from an acidic chloride bath in the absence of complexing agent. International Journal of Current Science, Engineering & Technology, Original Research Article | Open Access | AMCT 2017 Malaysia | Special Issue, Special issue. pp. 493-498. ISSN 2581-4311

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2016) Effects of doping elements in β-FeSi2 prepared utilizing cast iron scrap chips. Materials Transactions, 57 (3). pp. 445-451. ISSN 1345-9678 E-ISSN 1347-5320

Nor Hairin, Assayidatul Laila and Nanko, Makoto (2014) Characterization of cast iron scrap chips toward β-FeSi2 thermoelectric materials. Materials Science Forum, 804. pp. 3-6. E-ISSN 1662-9752

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2014) Upgrade recycling of cast iron scrap chips towards β-FeSi2 thermoelectric materials. Materials, 7. pp. 6304-6316. ISSN 1996-1944

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens and Yahya, Muhd Zu Azhan (2012) Evaluation of porous electrode properties using metal-air electrochemical system. In: 1st International Conference on Energy and Environmental Protection, ICEEP 2012, 23rd-24th June 2012, Hohhot, China.

Othman, Raihan and Ahmat, Farouq and Ibrahim, Muhd Amlie and Nor Hairin, Assayidatul Laila and Ani, Mohd Hanafi (2012) Effect of bath formulation and plating current density on electrodeposited zinc anode’s capacity in zinc-air cell. Advanced Materials Research, 576. pp. 484-487. ISSN 1022-6680

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens (2011) High discharge rate electrodeposited zinc electrode for use in alkaline microbattery. IIUM Engineering Journal, 12 (5). pp. 115-122. ISSN 1511-788X

Nor Hairin, Assayidatul Laila and Hens, Saputra and Ani, Mohd Hanafi and Othman, Raihan (2010) Optimization of zinc electrodeposition from zinc-air cell discharge performance. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)