Items where Author is "-, Suryanto"

Article

Mahmood, M. H. and Maleque, Md. Abdul and -, Suryanto (2020) Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management, 83 (May-June). pp. 1180-1185. E-ISSN 0193-4120

Paijan, Lailatul Harina and Maleque, Md Abdul and -, Suryanto (2020) Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management, 83 (May-June). pp. 1392-1397. ISSN 0193-4120

Mohamed Haider, Farag I. and -, Suryanto (2019) Carbon diffusion in 304I austenitic stainless steel at 650 steel at 650 -750°c in carburizing environment. International Journal of Recent Technology and Engineering (IJRTE, 7 (6). pp. 76-78. ISSN 2277-3878

-, Suryanto and Mahmood, Mahmood Hameed and Hazza Faizi Al Hazza, Muataz and Haider I., Farag (2018) Developing of corrosion resistance nano copper oxide coating on copper using anodization in oxalate solution. International Journal of Engineering TRANSACTIONS C: Aspects, 31 (3). pp. 450-455. ISSN 1735-9244

Mahmood, Mahmood Hameed and -, Suryanto and Al Hazza, Muataz Hazza Faizi (2017) The effects of water flow rate on copper corrosion. Key Engineering Materials, 748. pp. 235-239. ISSN 1662-9795

-, Suryanto and Haider, Farag and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Modelling and optimization of copper electroplating adhesion strength. IOP Conference Series: Materials Science and Engineering, 204 (012017). pp. 1-5. ISSN 1757-899X

Mahmood, Mahmood Hameed and -, Suryanto and Sopyan, Iis (2015) Hydrophobic organosilica coating on steel and aluminium. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17252-17255. ISSN 1819-6608

Sopyan, Iis and -, Gunawan and -, Suryanto (2015) Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. Advanced Materials Research, 1115. pp. 341-344. ISSN 1022-6680

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

Zakaria, Mohammad and -, Suryanto and Hilmy, Irfan (2015) Effects of surfactant on corrosion behavior of carbon steel in simulated crude oil. Advanced Material Research, 1115. 223-225. ISSN 1662-8985

Mahmood, Mahmood Hameed and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2015) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. Advanced Materials Research, 1115. pp. 230-233. ISSN 1662-8985

Mohamed Ariff, Tasnim Firdaus and Ibrahim, Husna Izzati and Roselley, Noor Sheila and Iqbal, Mohammad and Hilmy, Irfan and -, Suryanto (2014) Enhancing tool life of silicon nitride inserts via hybrid microwave post sintering. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 80-85. ISSN 1991-8178

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology, 8 (3(Spe)). pp. 680-685. ISSN 1995-0756 E-ISSN 1998-1066

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology, 8 (3(Spe)). pp. 787-791. ISSN 1995-0756 E-ISSN 1998-1066

Naqshbandi, Abreeq and Sopyan, Iis and -, Gunawan and -, Suryanto (2014) Sol-gel synthesis of Zn doped HA powders and their conversion to porous bodies. Applied Mechanics and Materials, 493. pp. 603-608. ISSN 1660-9336

Alqap, Asep Sofwan F. and Sopyan, Iis and -, Suryanto (2014) The effects of excess calcium and aging media on mechanical properties of calcium phosphate filling materials. Advanced Materials Research, 911. pp. 195-199. ISSN 1022-6680

Sopyan, Iis and -, Suryanto and Fadli, Ahmad and Ramesh, Singh (2013) Protein foaming-consolidation method for fabrication of high performance porous bioceramics. Advanced Materials Research, 622-23. pp. 1759-1763. ISSN 1022-6680

Mohd Yusoff, Marmeezee and Ani, Mohd Hanafi and -, Suryanto (2013) Synthesis and characterization of ZnO thin film memristor. Advanced Materials Research, 701. pp. 172-175. ISSN 1022-6680

-, Suryanto (2012) Dislocation generated by electron irradiation. Advanced Materials Research, 418-42. pp. 744-747. ISSN 1022-6680

Mridha, Shahjahan and Idriss, A.N.M. and Maleque, Md. Abdul and -, Suryanto and A. Mohamad Al-Batt’hi, Souad (2012) Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1). pp. 48-53. ISSN 1823-0334

Ani, Mohd Hanafi and Herman, Sukreen Hana and -, Suryanto and Othman, Raihan (2012) Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K. Advanced Materials Research, 576. pp. 429-433. ISSN 1022-6680

-, Suryanto and Ani, Mohd Hanafi (2012) Thermal stability of nickel molybdenum electrodeposits. Advanced Materials Research, 576. pp. 413-416. ISSN 1022-6680

Book Chapter

-, Suryanto (2011) Aluminum spray coating for corrosion resistance of steel. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 192-197. ISBN 9789674181642

-, Suryanto (2011) Amorphous coating of iron nickel alloy. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 1-6. ISBN 9789674181680

-, Suryanto (2011) Cathodic protection of underground pipes. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 210-215. ISBN 9789674181642

-, Suryanto (2011) Characterization and utilization of fly ash. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 189-194. ISBN 9789674181673

-, Suryanto (2011) Coating for high speed cutting tools. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 103-124. ISBN 9789674180232

-, Suryanto (2011) Corrosion behavior of duplex stainless steel in sea water. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 204-209. ISBN 9789674181642

-, Suryanto (2011) Corrosion behavior of zinc in potassium hydroxide aqueous solution. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 13-18. ISBN 9789674181680

-, Suryanto (2011) Electrodeposition of alloys. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 198-203. ISBN 9789674181642

-, Suryanto (2011) Electroless nickel based coatings from solution containing sodium hypophosphite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 184-188. ISBN 9789674181673

-, Suryanto (2011) Electroless nickel based coatings from solution containing sodium hypophosphite. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 186-191. ISBN 9789674181642

-, Suryanto (2011) Normal deposition to anomalous deposition. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 109-114. ISBN 9789674181680

-, Suryanto and Yunus, Nurul Azhani (2011) Powder coating has potential in developing several industries. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 230-236. ISBN 9789674181659

-, Suryanto (2011) Pulsed electrodeposition. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 178-182. ISBN 9789674181673

Proceeding Paper

Haider I., Farag and -, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2018) A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Paijan, Lailatul Harina and Maleque, Md. Abdul and -, Suryanto (2016) Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur. (Unpublished)

Hameed, Hameed Mahmood and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2014) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Sopyan, Iis and Gunawan, - and -, Suryanto (2014) Sol-gel derived zinc doped calcium phosphate bioceramics prepared via different sintering strategies. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Mridha, Shahjahan and Md. Idriss, A. N. and Maleque, Md. Abdul and -, Suryanto and Mohamad, Souad A. (2011) Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.