IIUM Repository

Dr Mohamed Konneh

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Bagum, Mst. Nasima and Konneh, Mohamed and Amin, A. K. M. Nurul (2018) Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass. The International Journal of Advanced Manufacturing Technology, 96 (9-12). pp. 3437-3447. ISSN 0268-3768
  2. Konneh, Mohamed (2016) Precision surface grinding of silicon carbide. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 51-58. E-ISSN 0128-1852
  3. Konneh, Mohamed and Zaini, Mohamad Hamzi (2015) Performance evaluation of drilling tools during machining plain Carbon Fiber Reinforced Polymer (CFRP). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17386-17390. ISSN 1819-6608
  4. Konneh, Mohamed and N. M. A., Rosli (2015) Experimental investigation of the effect of cutting tool coating on delamination during of milling Metal Matrix Composite (MMC). In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 20th-22th Sept. 2015, Johor Bahru, Johor. (Unpublished)
  5. Iqbal, Mohammad and Konneh, Mohamed and Ani, Mohd Hanafi and Abdallah, Kassim Abdulrahman and Binting, Muhammad Faruq (2015) Cutting temperature in high speed milling of silicon carbide using diamond coated tool. International Journal of Mechanical And Production Engineering, 3 (4). pp. 62-66. ISSN 2320-2092 E-ISSN 2321-2071
  6. Konneh, Mohamed and Sudin, Izman and Kassim, Abdullah Abdul Rahman (2015) Milling damage on carbon fibre reinforced polymer using tiAIN coated end mills. Journal of Physics: Conference Series, 628 (Con. 1). pp. 1-8. ISSN 1742-6588 E-ISSN 1742-6596
  7. Konneh, Mohamed and Sudin, Izman and Sidek, Atiah Abdullah and Salleh, Muhammad Salahuddin (2015) Surface roughness in drilled carbon fiber reinforced polymer (CFRP)composite using diamond coated ball-nose drills. Advanced Materials Research, 1115. pp. 90-95. ISSN 1662-8985
  8. Konneh, Mohamed and Abdallah, Kassim Abdulrahman and Sudin, Izman and Jusoh, Mohd Amirudin (2015) Investigation of delamination at exit of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills. Advanced Materials Research, 1115. pp. 80-85. ISSN 1662-8985
  9. Konneh, Mohamed and Iqbal, Mohammad and Ani, Hanfi and Yayah, Mohd Zulhari (2015) Influence of machining parameters on temperature when drilling carbon fiber reinforced polymer (CFRP) using coated diamond drills. Advanced Materials Research, 1115. pp. 74-79. ISSN 1662-8985
  10. Konneh, Mohamed and Sudin, Izman and Abdullah, Kassim Abdulrahman (2014) Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (ITMAR 2014), 20th-21st October 2014, Istanbul, Turkey.
  11. Yahaya, B. and Izman, S. and Konneh, Mohamed and Redzuan, Norizah (2014) Microwave hybrid heating of materials using susceptors- a brief review. Advanced Materials Research, 845. pp. 426-430. ISSN 1022-6680
  12. Iqbal, Mohammad and Konneh, Mohamed and Md Said, Ahmad Yasir and Mohd Zaini, Azri Fadhlan (2014) Surface quality of high speed milling of silicon carbide by using diamond coated tool. Applied Mechanics and Materials, 446-44. pp. 275-278. ISSN 1660-9336
  13. Konneh, Mohamed and Sudin, Izman and Padil, Mirza Emmil Dzahi and Roszat, Rosniza (2014) Surface roughness study of milled carbon fiber reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end mills. Advanced Materials Research, 887-88. pp. 1101-1106. ISSN 1022-6680
  14. Konneh, Mohamed and Iqbal, Mohammad and Kasim, Md Asnawi and Mohd Isa, Nurbahiah (2012) High speed milling of silicon carbide with diamond coated end mills. Advanced Materials Research, 576. pp. 535-538. ISSN 1022-6680
  15. Konneh, Mohamed and Iqbal, Mohammad and Faiz , Nik Mohd Azwan (2012) Diamond coated end mills in machining silicon carbide. Advanced Materials Research, 576. pp. 531-534. ISSN 10226680
  16. Konneh, Mohamed and Tamsir, Afzeri and Triblas Adesta, Erry Yulian (2012) Development of an economical lapping process. Advanced Materials Research, 472-47. pp. 2348-2353. ISSN 1022-6680
  17. Alao, Abdur-Rasheed and Konneh, Mohamed (2011) Surface finish prediction models for precision grinding of silicon. International Journal Advances Manufacturing Technology, 58 (9). pp. 949-967. ISSN 0268-3768
  18. Sudin, Izman and Mohd. Yusof, Noordin and Safari, Habib and Engku Abu Bakar, Engku Mohd Nazim and Aluwi Shakir, Noor Adila and Konneh, Mohamed (2010) Effect of high temperature chemical etching on surface roughness of tungsten carbide substrate. In: 11th Asia Pacific Industrial Engineering and Management Systems (APIEMS) Conference, 7-10 Dec 2010, Melaka, Malaysia. (In Press)
  19. Alao, Abdur-Rasheed and Konneh, Mohamed (2011) An experimental study on precision grinding of silicon using diamond grinding pins. International Journal Materials Engineering Innovation (IJMATEI), 2 (3-4). pp. 325-345. ISSN 1757-2754 E-ISSN 1757-2762
  20. Alam, S. and Amin, A. K. M. Nurul and Konneh, Mohamed and Patwari, Anayet U. (2011) Surface roughness prediction in high speed flat end milling of Ti-6Al-4V and optimization by desirability function of RSM. Advanced Materials Research, 264-26. pp. 1166-1173. ISSN 1022-6680

Most Viewed Items

Item titleViews
1Optimization of precision grinding parameters of silicon for surface roughness based on taguchi method1389
2Surface roughness prediction in high speed flat end milling of Ti-6Al-4V and optimization by desirability function of RSM 1352
3Application of taguchi and box-behnken designs for surface roughness in precision grinding of silicon1308
4Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate1285
5Prediction and investigation of surface response in high speed end milling of Ti-6Al-4V and optimization by genetic algorithm1232
6Reducing electrode wear using cryogenic cooling during electrical discharge machining1195
7Effect of high temperature chemical etching on surface roughness of tungsten carbide substrate1146
8An experimental study on precision grinding of silicon using diamond grinding pins1132
9Diamond coated end mills in machining silicon carbide1044
10Development of an economical lapping process1030
11A response surface methodology based approach to machining processes: modelling and quality of the models987
12Surface finish prediction models for precision grinding of silicon 980
13High speed milling of silicon carbide with diamond coated end mills951
14Surface roughness study of milled carbon fiber reinforced polymer (CFRP) composite using 4 mm 2-flute titanium aluminum nitride (TiAlN) coated carbide end mills740
15Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills726
16Milling damage on carbon fibre reinforced polymer using tiAIN coated end mills719
17Surface roughness in drilled carbon fiber reinforced polymer (CFRP)composite using diamond coated ball-nose drills694
18Microwave hybrid heating of materials using susceptors- a brief review688
19Surface quality of high speed milling of silicon carbide by using diamond coated tool667
20Cutting temperature in high speed milling of silicon carbide using diamond coated tool664
21Experimental investigation of the effect of cutting tool coating on delamination during of milling Metal Matrix Composite (MMC)631
22Influence of machining parameters on temperature when drilling carbon fiber reinforced polymer (CFRP) using coated diamond drills618
23Performance evaluation of drilling tools during machining plain Carbon Fiber Reinforced Polymer (CFRP)576
24Investigation of delamination at exit of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills 546
25Precision surface grinding of silicon carbide543
26Prediction and experimental validation of temperature rise in ductile mode end milling of soda-lime glass189